Develop Bugs

Google wallet did work...

After getting the GN, I did the update to 4.0.2. Waited a few hours and then went to work. The store I work at has the ability to use NFC. I thought what the hell, I'll try it. Fired up the app cause it was already on my phone and created an account. Got the free $10. And then I made a purchase!!
What the hell? I though Verizon was blocking it. Anyway, I decide to update my apps thru the market and it brought down the newest Google Wallet APK from 12.12.11. Now when I open the app it states that I must have a Google Employee account and the only option is to press "ok" and it closes the app.
Anyone else tried this? Dont know if it works out the box and the update for it kills it or if it just takes time for Verizon to find out and they kill it on there side.

christianpeso said:
After getting the GN, I did the update to 4.0.2. Waited a few hours and then went to work. The store I work at has the ability to use NFC. I thought what the hell, I'll try it. Fired up the app cause it was already on my phone and created an account. Got the free $10. And then I made a purchase!!
What the hell? I though Verizon was blocking it. Anyway, I decide to update my apps thru the market and it brought down the newest Google Wallet APK from 12.12.11. Now when I open the app it states that I must have a Google Employee account and the only option is to press "ok" and it closes the app.
Anyone else tried this? Dont know if it works out the box and the update for it kills it or if it just takes time for Verizon to find out and they kill it on there side.
Click to expand...
Click to collapse
are you rooted? how did you get the app again. please elaborate

it is not on the market for me.

Honestly, I dont know how I got it. I thought it came with it. And I never had Wallet before on any ANdroid phone so it wasn't syncing it from prior. Was just going thru my apps list and it was there. Even after all this, I then unlocked my bootloader and that reset everything. Google wallet was still there and there was that update in the market. Going back to work today. Will probably lock and unlock again and try Wallet again to see if it works before updating it.
I am not rooted.

can you pull the apk and post up here please

Please post proof, I'm using a non rooted stock GSM NS and I don't see it in the market.

christianpeso said:
Honestly, I dont know how I got it. I thought it came with it. And I never had Wallet before on any ANdroid phone so it wasn't syncing it from prior. Was just going thru my apps list and it was there. Even after all this, I then unlocked my bootloader and that reset everything. Google wallet was still there and there was that update in the market. Going back to work today. Will probably lock and unlock again and try Wallet again to see if it works before updating it.
I am not rooted.
Click to expand...
Click to collapse
Using Astro or any other file explorer:
navigate to "/" (the root directory of the phone, root is not required to view the files here)
Go to the "System" folder
Long press on the "build" or "build.prop" file, and select "open as," then select "text"
I used "File Editor" in the pop up dialog that appears
DO NOT EDIT/CHANGE ANYTHING, just look!
scroll down and report all the lines that start with both "ro.build. ..." and "ro.product. ..."
I would bet you have a slightly different Google-employee-only test build...
---------- Post added at 09:03 AM ---------- Previous post was at 09:02 AM ----------
slackwaresupport said:
can you pull the apk and post up here please
Click to expand...
Click to collapse
yes, or this!
Or, ChristianPeso, can you download "Barcode Scanner" from the market, and generate a market link to the app via QR code? and upload the QR code image here?

Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Verizon 4g lte GN. Does this not come with new phones?

christianpeso said:
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Verizon 4g lte GN. Does this not come with new phones?
Click to expand...
Click to collapse
Thanks, and no. This is potentially awesome news

s.m.knipe said:
thanks, and no. This is potentially awesome news
Click to expand...
Click to collapse
pull this apk!!!

My build.prop:
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=ICL53F
ro.build.display.id=ICL53F
ro.build.version.incremental=235179
ro.build.version.sdk=14
ro.build.version.codename=REL
ro.build.version.release=4.0.2
ro.build.date=Thu Dec 8 01:28:56 UTC 2011
ro.build.date.utc=1323307736
ro.build.type=user
ro.build.user=android-build
ro.build.host=vpbs6.mtv.corp.google.com
ro.build.tags=release-keys
ro.product.model=Galaxy Nexus
ro.product.brand=google
ro.product.name=mysid
ro.product.device=toro
ro.product.board=tuna
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=omap4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=toro
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=mysid-user 4.0.2 ICL53F 235179 release-keys
ro.build.fingerprint=google/mysid/toro:4.0.2/ICL53F/235179:user/release-keys
ro.build.characteristics=nosdcard
# end build properties
#
# system.prop for toro
#
rild.libpath=/vendor/lib/libsec-ril_lte.so
rild.libargs=-d /dev/ttys0
telephony.lteOnCdmaDevice=1
# Ril sends only one RIL_UNSOL_CALL_RING, so set call_ring.multiple to false
ro.telephony.call_ring.multiple=0
# Turn on IMS by default
persist.radio.imsregrequired=1
persist.radio.imsallowmtsms=1
# Default ecclist
ro.ril.ecclist=112,911,#911,*911
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.google.clientidbase=android-verizon
ro.com.google.locationfeatures=1
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.setupwizard.mode=OPTIONAL
ro.cdma.home.operator.numeric=310004
ro.cdma.home.operator.alpha=Verizon
ro.cdma.homesystem=64,65,76,77,78,79,80,81,82,83
ro.cdma.data_retry_config=default_randomization=2000,0,0,120000,180000,540000,960000
ro.gsm.data_retry_config=max_retries=infinite,default_randomization=2000,0,0,80000,125000,485000,905000
ro.gsm.2nd_data_retry_config=max_retries=infinite,default_randomization=2000,0,0,80000,125000,485000,905000
ro.config.vc_call_vol_steps=7
ro.cdma.otaspnumschema=SELC,1,80,99
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
ro.opengles.version=131072
ro.sf.lcd_density=320
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
ro.config.ringtone=Girtab.ogg
ro.config.notification_sound=Proxima.ogg
ro.config.alarm_alert=Cesium.ogg
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.com.android.wifi-watchlist=GoogleGuest
ro.error.receiver.system.apps=com.google.android.feedback
ro.setupwizard.enterprise_mode=1
keyguard.no_require_sim=true
drm.service.enabled=true
camera.flash_off=0
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

i dont see any real differences from yours to mine.

I have no idea then. Waiting for someone else with GN Verizon LTE running 4.0.2 to chime in with they got it or not.

I don't have it, nor can I locate it in the market, must be hidden. And mine's totally stock, got it yesterday at 9 AM.

this is mine.
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=ICL53F
ro.build.display.id=Android Revolution HD 2.1.0 LTE by mike1986
ro.build.version.incremental=235179
ro.build.version.sdk=14
ro.build.version.codename=REL
ro.build.version.release=4.0.2
ro.build.date=Thu Dec 8 01:28:56 UTC 2011
ro.build.date.utc=1323307736
ro.build.type=user
ro.build.user=android-build
ro.build.host=vpbs6.mtv.corp.google.com
ro.build.tags=release-keys
ro.product.model=Galaxy Nexus
ro.product.brand=google
ro.product.name=mysid
ro.product.device=toro
ro.product.board=tuna
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=omap4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=toro
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=mysid-user 4.0.2 ICL53F 235179 release-keys
ro.build.fingerprint=google/mysid/toro:4.0.2/ICL53F/235179:user/release-keys
ro.build.characteristics=nosdcard
# end build properties
#
# system.prop for toro
#
rild.libpath=/vendor/lib/libsec-ril_lte.so
rild.libargs=-d /dev/ttys0
telephony.lteOnCdmaDevice=1
# Ril sends only one RIL_UNSOL_CALL_RING, so set call_ring.multiple to false
ro.telephony.call_ring.multiple=0
# Turn on IMS by default
persist.radio.imsregrequired=1
persist.radio.imsallowmtsms=1
# Default ecclist
ro.ril.ecclist=112,911,#911,*911
#
# ADDITIONAL_BUILD_PROPERTIES
# BUILD.PROP_MODIFIED_BY_MIKE1986_FOR_ANDROID_REVOLUTION_HD
ro.com.google.clientidbase=android-verizon
ro.com.google.locationfeatures=1
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.setupwizard.mode=OPTIONAL
ro.cdma.home.operator.numeric=310004
ro.cdma.home.operator.alpha=Verizon
ro.cdma.homesystem=64,65,76,77,78,79,80,81,82,83
ro.cdma.data_retry_config=default_randomization=2000,0,0,120000,180000,540000,960000
ro.gsm.data_retry_config=max_retries=infinite,default_randomization=2000,0,0,80000,125000,485000,905000
ro.gsm.2nd_data_retry_config=max_retries=infinite,default_randomization=2000,0,0,80000,125000,485000,905000
ro.cdma.otaspnumschema=SELC,1,80,99
wifi.interface=wlan0
wifi.supplicant_scan_interval=120
ro.opengles.version=131072
ro.sf.lcd_density=320
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
ro.config.ringtone=Girtab.ogg
ro.config.notification_sound=Proxima.ogg
ro.config.alarm_alert=Cesium.ogg
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.com.android.wifi-watchlist=GoogleGuest
ro.error.receiver.system.apps=com.google.android.feedback
ro.setupwizard.enterprise_mode=1
keyguard.no_require_sim=true
drm.service.enabled=true
camera.flash_off=0
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
# Additional build.prop tweaks for Android Revolution HD
# Tweaks identyfication code
ro.ident=Android_Revolution_HD
# Disable debugging notify icon on statusbar
persist.adb.notify=0
ro.config.vc_call_vol_steps=100

Well damn, dont I feel lucky. Gonna wipe everything and restart again to see if I can get it to work. Will take some video if I do.

christianpeso said:
I have no idea then. Waiting for someone else with GN Verizon LTE running 4.0.2 to chime in with they got it or not.
Click to expand...
Click to collapse
*raises hand*
I got the 4.0.2 update yesterday. I didn't get Google Wallet.

christianpeso said:
Honestly, I dont know how I got it. I thought it came with it. And I never had Wallet before on any ANdroid phone so it wasn't syncing it from prior. Was just going thru my apps list and it was there. Even after all this, I then unlocked my bootloader and that reset everything. Google wallet was still there and there was that update in the market. Going back to work today. Will probably lock and unlock again and try Wallet again to see if it works before updating it.
I am not rooted.
Click to expand...
Click to collapse
can you go to app manager to see if you can uninstall the update?
usually available to stock applications.

rashad1 said:
Please post proof, I'm using a non rooted stock GSM NS and I don't see it in the market.
Click to expand...
Click to collapse
yes - how do we GLOBAL GSM users get google wallet?
its a bit ridiculous that i upgraded from Nexus S to Galaxy Nexus but LOSE a functionality!!!!

pull the apk first with adb!!!

downloading not compatible apps

Hi,
Its been complained about on couple of threads but im looking for some hope.
Im trying to get UBS Mobile Banking in Switzerland but its not compatible with SGS2 (due to my custom ROM, Root, who know why) This as many apps would most likely work if downloaded as apk and installed with e.g. rootexplorer.
Is there a way to trick the android market to get any apk from it ? Maybe some new generic account on google or else ?
Thanks

smartin said:
Hi,
Its been complained about on couple of threads but im looking for some hope.
Im trying to get UBS Mobile Banking in Switzerland but its not compatible with SGS2 (due to my custom ROM, Root, who know why) This as many apps would most likely work if downloaded as apk and installed with e.g. rootexplorer.
Is there a way to trick the android market to get any apk from it ? Maybe some new generic account on google or else ?
Thanks
Click to expand...
Click to collapse
have a play with this
https://market.android.com/details?id=ch.racic.android.marketenabler&hl=en

Tried that already,
I believe its not the network but more like some silly descriptor somewhere in phone identifier.
Weird thing. I did took another Androdid phone, downloaded the application from UBS but its not in system\app directory.
When in settings i try to copy it to SD card is says it is copy protected.
Sent from my GT-I9100 using XDA App

Guys,
Question to developers: how does market decide if an app is compatible our not ?
Some custom roms will see app on the market and some won't.
I did change the CSC to Swisscom and still nothing so its not that
Bests
Sent from my GT-I9100 using XDA App

Have you changed your dpi settings? Set it back to stock 240 and you should can download it...
Gesendet von meinem GT-I9100 mit Tapatalk

bgx,
my build.prop shows: ro.sf.lcd_density=240 so its not that
i start to think UBS Mobile banking is not compatible although comments on the market indicate it is.
My whole prop file
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=--VK-- Stable -XWKL1-[V3.2]-
ro.build.version.incremental=XWKL1
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Tue Dec 13 14:39:43 CET 2011
ro.build.date.utc=1323783583
ro.build.type=user
ro.build.user=root
ro.build.host=DELLBUILDER12
ro.build.tags=release-keys
ro.product.model=GT-I9100
ro.product.brand=samsung
ro.product.name=GT-I9100
ro.product.device=GT-I9100
ro.product.board=GT-I9100
ro.product.cpu.abi=armeabi-v7a
# Samsung Specific Properties
ro.build.PDA=I9100XWKL1
ro.build.hidden_ver=I9100XWKL1
ro.build.changelist=809037
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=vi
ro.product.locale.region=VN
ro.wifi.channels=
ro.board.platform=s5pc210
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-I9100
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-I9100-user 2.3.6 GINGERBREAD XWKL1 release-keys
ro.build.fingerprint=samsung/GT-I9100/GT-I9100:2.3.6/GINGERBREAD/XWKL1:user/release-keys
# Samsung Specific Properties
ro.build.PDA=I9100XWKL1
ro.build.hidden_ver=I9100XWKL1
ro.build.changelist=809037
ro.tether.denied=false
ro.flash.resolution=1080
# end build properties
#
# system.prop for asop5000
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=240
dalvik.vm.heapsize=64m
# Samsung USB default mode
persist.service.usb.setting=0
dev.powersave_fps=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=2.3_r8
media.stagefright.enable-player=false
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=false
dev.sfbootcomplete=0
ro.com.google.clientidbase=android-samsung
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
keyguard.no_require_sim=true
ro.config.ringtone=S_Over_the_horizon.ogg
ro.config.notification_sound=01_Sherbet.ogg
ro.config.alarm_alert=Good_Morning.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.opengles.version=131072
ro.setupwizard.mode=OPTIONAL
ro.secdevenc=true
ro.wtldatapassword=true
ro.error.receiver.default=com.samsung.receiver.error
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.ril.enable.dtm=1
ro.ril.gprsclass=12
ro.ril.enable.3g.prefix=1
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=9
ro.ril.hsxpa=3
ro.ril.hep=1
ro.ril.enable.a53=1
# pongsters special speed tweaks
windowsmgr.max_events_per_sec=150
wifi.supplicant_scan_interval=180
# Phone tweaks
ro.HOME_APP_ADJ=1
ro.media.enc.jpeg.quality=100
debug.sf.hw=1
ro.telephony.call_ring.delay=0
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
persist.adb.notify=0
debug.performance.tuning=1
video.accelerate.hw=1
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.config.hw_menu_unlockscreen=false
persist.sys.use_dithering=0
persist.sys.purgeable_assets=1
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
thanks

UBS Mobile App
I do not think it is our problem to install this app on devices we have. It is a problem of UBS which apparently can not deliver working product. I have complained/informed them already and would suggest to do the same.
W.

WiktorMk said:
I do not think it is our problem to install this app on devices we have. It is a problem of UBS which apparently can not deliver working product. I have complained/informed them already and would suggest to do the same.
W.
Click to expand...
Click to collapse
I did complain and i did get answer that is should work on SGS2.
I did in the meantime flashed back to stock rom (from VK) and i could
download and install the app.
Then i loaded Ultratoxic (as this is odin so could easily get custom rom and not go via installation of CWM).
UBS mobile app is also visible and can be loaded into it.
So I figure there are some parameters in VK rom and some others
that block this an perhaps other apps.
cheers

Anybody managed to get the APK for this ?
Can somebody share their APK file ?

why hasn't anyone shared the apk ?

smartin said:
Tried that already,
I believe its not the network but more like some silly descriptor somewhere in phone identifier.
Weird thing. I did took another Androdid phone, downloaded the application from UBS but its not in system\app directory.
When in settings i try to copy it to SD card is says it is copy protected.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
since its not a systemapp you have to search for it in /data/app/, downloaded apps will be stored there.

KcDaRookie said:
since its not a systemapp you have to search for it in /data/app/, downloaded apps will be stored there.
Click to expand...
Click to collapse
Just use titanium backup then find the apk there.
Please post here!

Meanwhile I had a friend do it for me.
http://dl.dropbox.com/u/92090/UBS_Mobile_Banking_Titanium_Bakcup.zip
Unzip and place 3 files into the TitanuimBackup folder on your sdcard, then open Titanium backup and Restore.
Works on my GN

horadee said:
Meanwhile I had a friend do it for me.
http://dl.dropbox.com/u/92090/UBS_Mobile_Banking_Titanium_Bakcup.zip
Unzip and place 3 files into the TitanuimBackup folder on your sdcard, then open Titanium backup and Restore.
Works on my GN
Click to expand...
Click to collapse
how do you restore it from titatium ? it doesn't show on the list of app.

chance the build prop.to the right samsung names
i am sure its a build prop. problem... i have a china tablet and when i got it,it could not download anything from market not even facebook i therefor chance the build prop. to a galaxy tab name and now i can download all things to that tab...
so if you have custom rom((because the names in custom roms is not always right)) you wanna chance the build prop. with root explorer ect. to the proper names...SAMSUNG names just find a build prop. like that above and make your names the same. save it and root explorer makes a copy of your old prop. you can go back to if you want.. reboot your phone and now you can download all the normal apps for sgs2..
you can also if you want a game there is not compatibel with our samsungs sgs2..
chance it to whatever you like(htc sensation) install the game rewert back to your stock build prop. and play the game...
hope its usefull and sorry the english.. martin

[Q] How to find the market.apk???

Hey
Basically alot of apps in the market do not show up in the market because they are not compatible with the galaxy y. An example is scramble with firends" which doesnt show up in the market however i downloaded it and it worked on my phone but first i had to change the resolution from the default 120 to 100 using an app (my phone is rooted but i still have stock rom). Now i was wondering whether if i could clear the cache and data for the market.apk while my phone was set to 100dpi then would the market show all the apps that are not compatible with my phone because of the dpi? However the only problem is i can not find the market.apk in the list of all my apps??? I was wondering how do i get it to appear on the galaxy y like it does on other android phones/tablets???
Please help with this?

you need to edit your build.prop,
this is very risky but will detect your phone as another device and not SGY
example of build.prop:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=MerrukUltimateRom BETA
ro.build.version.incremental=DXKL2
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Mon 16 Jan 19:22:01 KST 2011
ro.build.date.utc=1323944521
ro.build.tags=release-keys
ro.product.model=GT-S5360 <----change here
ro.product.brand=samsung
ro.product.name=GT-S5360 <----change here
ro.product.device=GT-S5360 <----change here
ro.product.board=totoro
ro.product.cpu.abi=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=bcm21553
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-S5360 <----change here
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-S5360<----change here-user 2.3.6 GINGERBREAD DXKL2 release-keys
ro.build.fingerprint=samsung/GT-S5360/GT-S5360:2.3.6/GINGERBREAD/DXKL2:user/release-keys
# Samsung Specific Properties
ro.build.PDA=S5360DXKL2
ro.build.hidden_ver=S5360DXKL2
ro.build.changelist=0000
ro.build.buildtag=
# end build properties
#
# system.prop for GT-S5360<----change here
#
# SEC_USE_SIPC : if SEC_USE_SIPC is on, enable libsec-ril.so and block libbrcm_ril.so
#rild.libpath=/system/lib/libsec-ril.so
rild.libpath=/system/lib/libbrcm_ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
#debug.sf.hw=1
debug.composition.type=mdp
dalvik.vm.heapsize=64m
ro.sf.lcd_density=120
#media.stagefright.enable-player=false
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
ro.media.enc.hprof.file.format=3gp
ro.media.enc.lprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.hprof.codec.aud=aac
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.hprof.vid.width=352
ro.media.enc.lprof.vid.width=176
ro.media.enc.hprof.vid.height=288
ro.media.enc.lprof.vid.height=144
ro.media.enc.hprof.vid.fps=30
ro.media.enc.lprof.vid.fps=30
ro.media.enc.hprof.vid.bps=384000
ro.media.enc.lprof.vid.bps=192000
ro.media.enc.hprof.aud.bps=23450
ro.media.enc.lprof.aud.bps=23450
ro.media.enc.hprof.aud.ch=1
ro.media.enc.lprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.lprof.aud.hz=8000
ro.media.cam.preview.fps=15
dalvik.vm.jniopts=warnonly
net.streaming.rtsp.uaprof=http://wap.samsungmobile.com/uaprof/GT-S5360.xml<----change here
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.setupwizard.mode=DISABLED
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=2.3_r8
ro.config.notification_sound=13_Whistle_Default_message.ogg
ro.config.alarm_alert=1_Good_Morning.ogg
alsa.mixer.playback.master=Speaker
alsa.mixer.capture.master=Mic
alsa.mixer.playback.earpiece=Earpiece
alsa.mixer.capture.earpiece=Mic
alsa.mixer.playback.headset=Headset
alsa.mixer.capture.headset=Mic
alsa.mixer.playback.speaker=Speaker
alsa.mixer.capture.speaker=Mic
alsa.mixer.playback.bt.sco=BTHeadset
alsa.mixer.capture.bt.sco=BTHeadset
alsa.mixer.playback.bt.a2dp=BTHeadset
alsa.mixer.capture.bt.a2dp=BTHeadset
dev.sfbootcomplete=0
keyguard.no_require_sim=true
ro.config.ringtone=Over_the_horizon_Default_ringtone.ogg
ro.config.notification_sound=13_Whistle_Default_message.ogg
ro.config.alarm_alert=Alarm_Buzzer.ogg
ro.opengles.version=131072
ro.com.google.clientidbase=android-samsung
+=wifi.interface=wl0.1
ro.error.receiver.default=com.samsung.receiver.error
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Click to expand...
Click to collapse

Thanks
But are you sure i don't need to clear the data of the market.apk first since i saw a thread which is similar to what you told me above but it says to clear market.apk data but i cant find this market.apk. instead does it mean the google play.apk???
its risky so ill make a backup of the build.prop but should i also make a nandroid backup? the only problem is i cant make a nandroid backup via the recovery mode?

rezler said:
Thanks
But are you sure i don't need to clear the data of the market.apk first since i saw a thread which is similar to what you told me above but it says to clear market.apk data but i cant find this market.apk. instead does it mean the google play.apk???
its risky so ill make a backup of the build.prop but should i also make a nandroid backup? the only problem is i cant make a nandroid backup via the recovery mode?
Click to expand...
Click to collapse
stock recovery does not have a back up feature
try cwm recovery instead

deathnotice01 said:
you need to edit your build.prop,
this is very risky but will detect your phone as another device and not SGY
[/size]
Click to expand...
Click to collapse
I tried it just now by replacing all the"GT-S5360" with "GT-I9100" but it didn't work. What should i change it to? please reply

rezler said:
I tried it just now by replacing all the"GT-S5360" with "GT-I9100" but it didn't work. A also cleared the data and cache in the google play??? Why hasn't this worked? Was i meant to replace it all with something else?
Click to expand...
Click to collapse
You can replace them by writing 'Nexus S' too...
Sent from heaven!

Hey2
What's build.prop for xperia QVGA types?
Sorry for my bad english
Sent from my Desire HD using xda premium

hmmm it still wont work, the apps are still not showing up. Can someone plz provided a edited build.prop file that should work plz or just provide the edited lines?
thanks

You can use chainfire 3d and fix market setting. Demolition inc THD will show up but not work on me
Sent from my Desire HD using xda premium

Use blackmarket and apktop to download apps
Sent from my GT-S5360 using XDA

http://codekiem.com/apk-downloader
try this one.

nandroid of imm76d.t999uvalg1

heres is a nandroid of the newest stock rom from tmobile i rooted then did a cwm backup.I figure it could be a new base for developers..the systemext.tar is done syncing now.4.04 ics nothing removed just stock.
https://www.dropbox.com/sh/5vd0fi7wcre7gfb/7BeDbab77K
baseband files added
I want to thank wildchild and uoy_redrum for the support and making something useful out of this update.
Here's a link to the newest deodexed Rom from wildchild. Cwm flashable
http://forum.xda-developers.com/showthread.php?t=1826393

4.1.1? Or just 4.0.4 like any other ROM?
Sent from my SGH-T999 using xda app-developers app

4.0.4 Here's the build.prop
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=IMM76D.T999UVALG1
ro.build.version.incremental=T999UVALG1
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Wed Jul 4 12:50:17 KST 2012
ro.build.date.utc=1341373817
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-78
ro.build.tags=release-keys
ro.product.model=SGH-T999
ro.product.brand=samsung
ro.product.name=d2tmo
ro.product.device=d2tmo
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product_ship=true
# Samsung Specific Properties
ro.build.PDA=T999UVALG1
ro.build.hidden_ver=T999UVALG1
ro.build.changelist=611599
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=d2tmo
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=d2tmo-user 4.0.4 IMM76D T999UVALG1 release-keys
ro.build.fingerprint=samsung/d2tmo/d2tmo:4.0.4/IMM76D/T999UVALG1:user/release-keys
ro.build.characteristics=tmo
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
ro.sf.compbypass.enable=1
ro.sf.lcd_density=320
dev.pm.dyn_samplingrate=1
#
# system props for the cne module
#
persist.cne.UseCne=false
persist.cne.UseSwim=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.sync.swim.mode=false
#camera changes..
persist.sys.camera.transform=0
persist.sys.camera.connect=0
ro.hdmi.enable=true
lpa.decode=true
lpa.use-stagefright=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.speaker.location=high
#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
ro.opengles.version=131072
#
# system prop for Bluetooth Dialup Networking
#
ro.qualcomm.bluetooth.dun=false
# system prop for Bluetooth FTP profile
ro.qualcomm.bluetooth.ftp=false
#
# system property for Bluetooth Handsfree Profile Wide Band Speech
#
ro.qualcomm.bluetooth.hfp.wbs=false
#
#system prop for Bluetooth hci transport
ro.qualcomm.bt.hci_transport=smd
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
# System property for cabl
ro.qualcomm.cabl=0
# System property for Default Brightness
ro.lcd_min_brightness=20
# System property for SIM
persist.radio.apm_sim_not_pwdn=1
# Multimedia property for Smart View
media.enable-commonsource=true
# System proverty for sys info indication
persist.radio.add_power_save=1
# System proverty snapshot disable
persist.radio.snapshot_disabled=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.vendor.extension_library=/system/lib/libqc-opt.so
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
ro.sec.fle.encryption=true
windowsmgr.max_events_per_sec=100
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.ringtone=CLEAN_Tmo_Jingle.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.error.receiver.default=com.samsung.receiver.error
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
dev.sfbootcomplete=0
ro.com.google.clientidbase=android-samsung
drm.service.enable=true
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.clientidbase.ms=android-hms-tmobile-us
ro.com.google.clientidbase.am=android-tmobile-us
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.gmsversion=4.0_r2
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

can someone who knows how pull the modem

What's this for isn't it stock?
Sent from my SGH-T999 using xda premium

immunityx said:
What's this for isn't it stock?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Yes, but not the original shipping stock (maybe newer units), as far as I can tell.

its just a newer stock rom that shipped with my phone.No one posted it yet so i figured i would get it out there.Im not sure what changes it brings but its running smooth for me.

immunityx said:
What's this for isn't it stock?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
If there's improvement in the update then devs can rebase their roms. Most ROMs come from stock dumps like these
sent from my real Gs move in silence like lasagna

Hmm...
Does anyone know why they would release another one so soon?
I doubt there is an official change log anywhere...

how do we know that this isn't older firmware? Maybe we have the most current one? Not trying to put the op down. Just giving an alternate perspective. This update isn't available using kies is it?
Sent from my SGH-T999 using Tapatalk 2

WackyJoe said:
Does anyone know why they would release another one so soon?
I doubt there is an official change log anywhere...
Click to expand...
Click to collapse
Its probably bugfixes
MacTheRipperr said:
how do we know that this isn't older firmware? Maybe we have the most current one? Not trying to put the op down. Just giving an alternate perspective. This update isn't available using kies is it?
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Releases are alphabetical
sent from my real Gs move in silence like lasagna

WackyJoe said:
Does anyone know why they would release another one so soon?
I doubt there is an official change log anywhere...
Click to expand...
Click to collapse
Part of the lawsuit that's going on. They had to remove something so they released an ota
Sent from my SGH-T999 using xda app-developers app

i heard that the new update address some wi fi and modem issues? if i am not mistaking

would you be willing to go here http://www.sammobile.com/firmware/?page=8 and enter in the info it requests so the rest of us can download a stock tar once they have it available? make sure to enter T-999 and NOT T-999V. thanks!
Please enter your firmware version below and hit send.
If we dont have the firmware available for download at the moment,
it will be added within the next hour just for you!
Click to expand...
Click to collapse

its new
MacTheRipperr said:
how do we know that this isn't older firmware? Maybe we have the most current one? Not trying to put the op down. Just giving an alternate perspective. This update isn't available using kies is it?
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
I sent my first one back. When I got my new phone there was a sticker that said updated on the package. Then again on the plastic protecting the phone.its new software. mrmako77 i couldnt get the data #1234# unable to process request..Is there another way?

Hmmm, I wonder if there is anything in here worth rebasing on this....
It's probably minor stuff.
Other then the baseband. That kind of intrigues me. Wonder what they did to it..
Sent from my SGH-T999 using xda premium

uoY_redruM said:
Hmmm, I wonder if there is anything in here worth rebasing on this....
It's probably minor stuff.
Other then the baseband. That kind of intrigues me. Wonder what they did to it..
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I'll extract the system.tar tomorrow and do a compair to see what was changed.
I want the baseband

This isn't new. It's been around. Last time someone had trouble updating with this build because keys wouldn't recognize it. It's just another version that tmous gs3 shipped with.
Sent from my Galaxy Nexus using Tapatalk 2

I think the new baseband fixed the cell standby and WiFi reception. Ad those were the major concerns of the original UVLEM
Sent from my T999 using Tapatalk 2

Its 100% a newer update I orderd one was defective. So they sent me a new phone the box says updated. I don't think they would waste their time adding stickers to the boxes plus on the protective plastic on the phone for no reason. Either way its uploaded so I hope it helps in some development. Thanks to all of the developers who take time to make our devices better. I wish I could do more to help.

Sprint note 2 gets google wallet

Now, i wonder if we can use the build prompts from the sprint note 2 on our att phone no more galaxy nexus build prompts.
http://www.androidguys.com/2013/05/...ort/?utm_medium=referral&utm_source=pulsenews

With ISIS being an epic fail, I can't believe that ATT has not done this yet.
Lets hope our great devs can find some value in the code, and hopefully hook us up.....g

Ok well my buddy just change his build prob to the sprint values and his wallet is working
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

Andrew149 said:
Ok well my buddy just change his build prob to the sprint values and his wallet is working
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Wow could it be that simple???

Andrew149 said:
Ok well my buddy just change his build prob to the sprint values and his wallet is working
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Well.. your buddy is one lucky one.
I tried and it does not work.. it stops at "Device set up failed".
Funny thing is when I was checking my wallet from wallet.google.com, my phone was registered as Galaxy Nexus. My wallet was working once using Galaxy Nexus build prop to set up.

So mine was working with the galaxy nexus settings, I ran the script to revert it to the stock SkyNote values (SkyNote google wallet finalize). At this point google wallet does not open. I then replaced the 5 places that say t0lteatt with t0ltespr, reboot (you have to reboot for build.prop changes) and it works. Still says unsupported device but opens and appears functional. I didn't try gwallet before this update happened
Here is my build.prop:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id= JZO54K
ro.build.display.id=SkyNote 8
ro.build.version.incremental=I317UCAMA4
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=Fri Jan 18 11:30:14 KST 2013
ro.build.date.utc=1358476214
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-80
ro.build.tags=release-keys
ro.product.model=SAMSUNG-SGH-I317
ro.product.brand=samsung
ro.product.name=
t0ltespr
ro.product.device=t0ltespr
ro.product.board=smdk4x12
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=true
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=exynos4
# ro.build.product is obsolete; use ro.product.device
ro.build.product= t0ltespr
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=t0ltespr-user 4.1.2 JZO54K I317UCAMA4 release-keys
ro.build.fingerprint=samsung/t0ltespr/t0ltespr:4.1.2/ JZO54K /I317UCAMA4:user/release-keys
ro.build.characteristics=att
# Samsung Specific Properties
ro.build.PDA=I317UCAMA4
ro.build.hidden_ver=I317UCAMA4
ro.build.changelist=578342
# end build properties
#
# system.prop for smdk4x12
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=320
ro.lcd_min_brightness=15
ro.kernel.qemu=0
ro.tvout.enable=true
persist.sys.storage_preload=1
net.streaming.rtsp.uaprof=http://wap.samsungmobile.com/uaprof/
# Multimedia property for Smart View
media.enable-commonsource=true
# System property ril adb log on
persist.radio.adb_log_on=1
# System property for SIM
persist.radio.apm_sim_not_pwdn=1
# System property for Default touch key light duration
ro.button_key_light=6000
# System proverty for sys info indication
persist.radio.add_power_save=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
debug.hwui.render_dirty_regions=false
ro.sf.lcd_density=320
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
ro.hdcp2.rx=tz
ro.secwvk=220
ro.sec.fle.encryption=true
ro.config.ringtone=Dance_alone.ogg
ro.config.notification_sound=Fluorine.ogg
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.monkey=0
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=DISABLED
ro.com.google.apphider=off
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.1_r3
dalvik.vm.dexopt-flags=m=y,v=n,o=v,u=n
dalvik.vm.execution-mode=int:jit
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.HOME_APP_ADJ=1
ro.HOME_APP_MEM=7095
ro.HOME_APP_BROWSER_ADJ=1
ro.min.fling_velocity=7000
ro.max.fling_velocity=12000
ro.secure=0
ro.debuggable=1
ro.mot.proximity.delay=0
ro.lge.proximity.delay=0
ro.service.swiqi.supported=false
debug.performance.tuning=1
video.accelerate.hw=1
ro.ril.disable.power.collapse=1
ro.hdmi.enable=true
persist.adb.notify=0
persist.service.adb.enable=1
persist.service.mount.playsnd=0
persist.service.swiqi.enable=0
persist.sys.purgeable_assets=0
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
pm.sleep_mode=1
windowsmgr.max_events_per_sec=1200
wifi.supplicant_scan_interval=180
lpa.decode=true
lpa.use-stagefright=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=false
APP_SWITCH_DELAY_TIME=false
PROC_START_TIMEOUT=false
ro.media.enc.hprof.vid.bps=12000000
ro.media.enc.hprof.vid.bps=12000000
ro.media.enc.hprof.aud.bps=12000000
ro.media.enc.hprof.codec.vid=12000000
ro.media.enc.hprof.codec.aud=12000000
ro.media.enc.hprof.aud.hz=12000000
ro.media.dec.vid.wmv.enabled=1
ro.media.dec.aud.wma.enabled=1
ro.media.dec.aud.flac.enabled=1
ro.media.dec.vid.avi.enabled=1
persist.sys.shutdown.mode=hibernate
ro.ril.disable.fastdormancy=1
ro.ril.enable.amr.wideband=1
ro.telephony.call_ring.delay=0
ro.facelock.black_timeout=400
ro.facelock.det_timeout=1500
ro.facelock.rec_timeout=2500
ro.facelock.lively_timeout=2500
ro.facelock.est_max_time=600
ro.semc.sound_effects_enabled=true
ro.semc.xloud.supported=true
persist.service.xloud.enable=1
ro.semc.enhance.supported=true
persist.service.enhance.enable=1
ro.semc.clearaudio.supported=true
persist.service.clearaudio.enable=1
ro.sony.walkman.logger=1
persist.service.clearphase.enable=1
ro.somc.clearphase.supported=true
persist.af.resampler.quality=255
htc.audio.swalt.enable=1
htc.audio.swalt.mingain=14512
af.resampler.quality=255
debug.kill_allocating_task=0
dev.pm.dyn_samplingrate=1
ENFORCE_PROCESS_LIMIT=false
ro.wmt.blcr.enable=0
ro.ril.sensor.sleep.control=1
usb_wakeup=enable
dev.bootcomplete=0
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=true
ro.media.enc.hprof.vid.fps=75
ro.mot.buttonlight.timeout=1
ro.config.hw_quickpoweron=true
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

I want my Wallet back... Dang it Google....
Interesting..
Anyways, a guy in Sprint Note 2 called the google, and found out they are still working to have wallet working on Sprint Note too..
So, I guess we could wait a while and see if switching build.prop to Sprint works flawlessly or not.
http://forum.xda-developers.com/showpost.php?p=41491532&postcount=302
joeavery2 said:
So mine was working with the galaxy nexus settings, I ran the script to revert it to the stock SkyNote values (SkyNote google wallet finalize). At this point google wallet does not open. I then replaced the 5 places that say t0lteatt with t0ltespr, reboot (you have to reboot for build.prop changes) and it works. Still says unsupported device but opens and appears functional. I didn't try gwallet before this update happened
Here is my build.prop:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id= JZO54K
ro.build.display.id=SkyNote 8
ro.build.version.incremental=I317UCAMA4
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=Fri Jan 18 11:30:14 KST 2013
ro.build.date.utc=1358476214
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-80
ro.build.tags=release-keys
ro.product.model=SAMSUNG-SGH-I317
ro.product.brand=samsung
ro.product.name=
t0ltespr
ro.product.device=t0ltespr
ro.product.board=smdk4x12
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=true
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=exynos4
# ro.build.product is obsolete; use ro.product.device
ro.build.product= t0ltespr
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=t0ltespr-user 4.1.2 JZO54K I317UCAMA4 release-keys
ro.build.fingerprint=samsung/t0ltespr/t0ltespr:4.1.2/ JZO54K /I317UCAMA4:user/release-keys
ro.build.characteristics=att
# Samsung Specific Properties
ro.build.PDA=I317UCAMA4
ro.build.hidden_ver=I317UCAMA4
ro.build.changelist=578342
# end build properties
#
# system.prop for smdk4x12
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=320
ro.lcd_min_brightness=15
ro.kernel.qemu=0
ro.tvout.enable=true
persist.sys.storage_preload=1
net.streaming.rtsp.uaprof=http://wap.samsungmobile.com/uaprof/
# Multimedia property for Smart View
media.enable-commonsource=true
# System property ril adb log on
persist.radio.adb_log_on=1
# System property for SIM
persist.radio.apm_sim_not_pwdn=1
# System property for Default touch key light duration
ro.button_key_light=6000
# System proverty for sys info indication
persist.radio.add_power_save=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
debug.hwui.render_dirty_regions=false
ro.sf.lcd_density=320
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
ro.hdcp2.rx=tz
ro.secwvk=220
ro.sec.fle.encryption=true
ro.config.ringtone=Dance_alone.ogg
ro.config.notification_sound=Fluorine.ogg
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.monkey=0
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=DISABLED
ro.com.google.apphider=off
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.1_r3
dalvik.vm.dexopt-flags=m=y,v=n,o=v,u=n
dalvik.vm.execution-mode=int:jit
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.HOME_APP_ADJ=1
ro.HOME_APP_MEM=7095
ro.HOME_APP_BROWSER_ADJ=1
ro.min.fling_velocity=7000
ro.max.fling_velocity=12000
ro.secure=0
ro.debuggable=1
ro.mot.proximity.delay=0
ro.lge.proximity.delay=0
ro.service.swiqi.supported=false
debug.performance.tuning=1
video.accelerate.hw=1
ro.ril.disable.power.collapse=1
ro.hdmi.enable=true
persist.adb.notify=0
persist.service.adb.enable=1
persist.service.mount.playsnd=0
persist.service.swiqi.enable=0
persist.sys.purgeable_assets=0
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
pm.sleep_mode=1
windowsmgr.max_events_per_sec=1200
wifi.supplicant_scan_interval=180
lpa.decode=true
lpa.use-stagefright=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=false
APP_SWITCH_DELAY_TIME=false
PROC_START_TIMEOUT=false
ro.media.enc.hprof.vid.bps=12000000
ro.media.enc.hprof.vid.bps=12000000
ro.media.enc.hprof.aud.bps=12000000
ro.media.enc.hprof.codec.vid=12000000
ro.media.enc.hprof.codec.aud=12000000
ro.media.enc.hprof.aud.hz=12000000
ro.media.dec.vid.wmv.enabled=1
ro.media.dec.aud.wma.enabled=1
ro.media.dec.aud.flac.enabled=1
ro.media.dec.vid.avi.enabled=1
persist.sys.shutdown.mode=hibernate
ro.ril.disable.fastdormancy=1
ro.ril.enable.amr.wideband=1
ro.telephony.call_ring.delay=0
ro.facelock.black_timeout=400
ro.facelock.det_timeout=1500
ro.facelock.rec_timeout=2500
ro.facelock.lively_timeout=2500
ro.facelock.est_max_time=600
ro.semc.sound_effects_enabled=true
ro.semc.xloud.supported=true
persist.service.xloud.enable=1
ro.semc.enhance.supported=true
persist.service.enhance.enable=1
ro.semc.clearaudio.supported=true
persist.service.clearaudio.enable=1
ro.sony.walkman.logger=1
persist.service.clearphase.enable=1
ro.somc.clearphase.supported=true
persist.af.resampler.quality=255
htc.audio.swalt.enable=1
htc.audio.swalt.mingain=14512
af.resampler.quality=255
debug.kill_allocating_task=0
dev.pm.dyn_samplingrate=1
ENFORCE_PROCESS_LIMIT=false
ro.wmt.blcr.enable=0
ro.ril.sensor.sleep.control=1
usb_wakeup=enable
dev.bootcomplete=0
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=true
ro.media.enc.hprof.vid.fps=75
ro.mot.buttonlight.timeout=1
ro.config.hw_quickpoweron=true
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse

I'll add that doing just the first three didn't work. It could be only the fingerprint or description that needs to be changed.
I'll try to minimize the change then build a zip.
What I don't know atm is if you need to do any steps as you would have needed to previously or if just telling play store and google wallet that it's a sprint phone is enough.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

I was able to download Wallet from Play Store after changing build.prop to match Sprint Note 2... even with only those 4 lines.
Problem is I keep getting "Device set up failed" message..
joeavery2 said:
I'll add that doing just the first three didn't work. It could be only the fingerprint or description that needs to be changed.
I'll try to minimize the change then build a zip.
What I don't know atm is if you need to do any steps as you would have needed to previously or if just telling play store and google wallet that it's a sprint phone is enough.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse

So, I changed the first three, tried a few different ways, each change I rebooted and confirmed that Google wallet would not launch. I'm posting the relevent part of the build.prop, Make sure you change all the items in RED :
Code:
ro.product.name=[COLOR="Red"]t0ltespr[/COLOR]
ro.product.device=[COLOR="red"]t0ltespr[/COLOR]
ro.product.board=smdk4x12
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=true
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=exynos4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=[COLOR="red"] t0ltespr[/COLOR]
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=[COLOR="red"]t0ltespr[/COLOR]-user 4.1.2 JZO54K I317UCAMA4 release-keys
ro.build.fingerprint=samsung/[COLOR="red"]t0ltespr/t0ltespr[/COLOR]:4.1.2/ JZO54K /I317UCAMA4:user/release-keys
I tried building a Zip from it but it failed and I don't have time to mess with it ATM.
---------- Post added at 12:28 PM ---------- Previous post was at 11:41 AM ----------
Ok I removed Google wallet via the Wallet app delete from device, I then used the skynote done with wallet revert zip. I rebooted. With Build.prop still showing as a sprint device I was able to download the app, however it would not initialize, it hung. So instead I ran the SkyNote_google_wallet_step1 zip. Initialized Google wallet, Then installed the Sprint edited version of Build.prop. The last step is equivalent to what happens with the SkyNote_google_wallet_finalize.zip which only adjust the build.prop back to ATT Note from Galaxy nexus.
Basically the second step is all that changes, instead of using the finalize zip to set the build.prop to att, we need to set it to sprint. Since I currently can't get the zip to work, your stuck editing the build.prop on your own, unless someone else can manage to copy/paste it, just replace the one in the SkyNote_google_wallet_finalize.zip under system with a windows machine and try installing it.
Key thing to note. If you can get google wallet to initialize after the first step, let it finish and you'll get a notification that "google wallet is ready to use" At this point you could just leave the phone as is. The issue is that S-Pen apps won't work, as they check to see that the phone is a Note vs a Nexus. If you can't get this part to work then you have something else going on, like you un-installed google wallet incorrectly and it's locked up now. You may try the google wallet revert zip from skynote thread. It seems to me that the issue is that google wallet creates a bunch of files on the device needed to make things work properly. If they are not all deleted (un-installing the app or apk doesn't do this) then it will cause issues.
Anyway, I was able to uninstall everything, start from scratch and install it all again. I currently have the build.prop mod'd to be a sprint Note2 T0ltespr and Both Google Wallet and S-pen apps work.
Hopefully this is helpful!

joeavery2 said:
So, I changed the first three, tried a few different ways, each change I rebooted and confirmed that Google wallet would not launch. I'm posting the relevent part of the build.prop, Make sure you change all the items in RED :
Code:
ro.product.name=[COLOR="Red"]t0ltespr[/COLOR]
ro.product.device=[COLOR="red"]t0ltespr[/COLOR]
ro.product.board=smdk4x12
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=true
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=exynos4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=[COLOR="red"] t0ltespr[/COLOR]
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=[COLOR="red"]t0ltespr[/COLOR]-user 4.1.2 JZO54K I317UCAMA4 release-keys
ro.build.fingerprint=samsung/[COLOR="red"]t0ltespr/t0ltespr[/COLOR]:4.1.2/ JZO54K /I317UCAMA4:user/release-keys
I tried building a Zip from it but it failed and I don't have time to mess with it ATM.
---------- Post added at 12:28 PM ---------- Previous post was at 11:41 AM ----------
Ok I removed Google wallet via the Wallet app delete from device, I then used the skynote done with wallet revert zip. I rebooted. With Build.prop still showing as a sprint device I was able to download the app, however it would not initialize, it hung. So instead I ran the SkyNote_google_wallet_step1 zip. Initialized Google wallet, Then installed the Sprint edited version of Build.prop. The last step is equivalent to what happens with the SkyNote_google_wallet_finalize.zip which only adjust the build.prop back to ATT Note from Galaxy nexus.
Basically the second step is all that changes, instead of using the finalize zip to set the build.prop to att, we need to set it to sprint. Since I currently can't get the zip to work, your stuck editing the build.prop on your own, unless someone else can manage to copy/paste it, just replace the one in the SkyNote_google_wallet_finalize.zip under system with a windows machine and try installing it.
Key thing to note. If you can get google wallet to initialize after the first step, let it finish and you'll get a notification that "google wallet is ready to use" At this point you could just leave the phone as is. The issue is that S-Pen apps won't work, as they check to see that the phone is a Note vs a Nexus. If you can't get this part to work then you have something else going on, like you un-installed google wallet incorrectly and it's locked up now. You may try the google wallet revert zip from skynote thread. It seems to me that the issue is that google wallet creates a bunch of files on the device needed to make things work properly. If they are not all deleted (un-installing the app or apk doesn't do this) then it will cause issues.
Anyway, I was able to uninstall everything, start from scratch and install it all again. I currently have the build.prop mod'd to be a sprint Note2 T0ltespr and Both Google Wallet and S-pen apps work.
Hopefully this is helpful!
Click to expand...
Click to collapse
can u give a step by step to how make google wallet work on att note 2 , with all the file u need or install

Root your phone problem solved
Sent from my SAMSUNG-SGH-I317 using xda premium

joeavery2 said:
So, I changed the first three, tried a few different ways, each change I rebooted and confirmed that Google wallet would not launch. I'm posting the relevent part of the build.prop, Make sure you change all the items in RED :
Code:
ro.product.name=[COLOR="Red"]t0ltespr[/COLOR]
ro.product.device=[COLOR="red"]t0ltespr[/COLOR]
ro.product.board=smdk4x12
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=true
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=exynos4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=[COLOR="red"] t0ltespr[/COLOR]
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=[COLOR="red"]t0ltespr[/COLOR]-user 4.1.2 JZO54K I317UCAMA4 release-keys
ro.build.fingerprint=samsung/[COLOR="red"]t0ltespr/t0ltespr[/COLOR]:4.1.2/ JZO54K /I317UCAMA4:user/release-keys
I tried building a Zip from it but it failed and I don't have time to mess with it ATM.
---------- Post added at 12:28 PM ---------- Previous post was at 11:41 AM ----------
Ok I removed Google wallet via the Wallet app delete from device, I then used the skynote done with wallet revert zip. I rebooted. With Build.prop still showing as a sprint device I was able to download the app, however it would not initialize, it hung. So instead I ran the SkyNote_google_wallet_step1 zip. Initialized Google wallet, Then installed the Sprint edited version of Build.prop. The last step is equivalent to what happens with the SkyNote_google_wallet_finalize.zip which only adjust the build.prop back to ATT Note from Galaxy nexus.
Basically the second step is all that changes, instead of using the finalize zip to set the build.prop to att, we need to set it to sprint. Since I currently can't get the zip to work, your stuck editing the build.prop on your own, unless someone else can manage to copy/paste it, just replace the one in the SkyNote_google_wallet_finalize.zip under system with a windows machine and try installing it.
Key thing to note. If you can get google wallet to initialize after the first step, let it finish and you'll get a notification that "google wallet is ready to use" At this point you could just leave the phone as is. The issue is that S-Pen apps won't work, as they check to see that the phone is a Note vs a Nexus. If you can't get this part to work then you have something else going on, like you un-installed google wallet incorrectly and it's locked up now. You may try the google wallet revert zip from skynote thread. It seems to me that the issue is that google wallet creates a bunch of files on the device needed to make things work properly. If they are not all deleted (un-installing the app or apk doesn't do this) then it will cause issues.
Anyway, I was able to uninstall everything, start from scratch and install it all again. I currently have the build.prop mod'd to be a sprint Note2 T0ltespr and Both Google Wallet and S-pen apps work.
Hopefully this is helpful!
Click to expand...
Click to collapse
So you only had to change the text in red and now it's working? I have no problem editing the buildprop, I'm just unclear if there are any other lines that need to be edited.
---------- Post added at 07:27 AM ---------- Previous post was at 07:19 AM ----------
I changed all of the items in red, but when opening wallet I get an"insufficient secure element privelages for this system image (release keys)." message.

yongh said:
can u give a step by step to how make google wallet work on att note 2 , with all the file u need or install
Click to expand...
Click to collapse
Assuming you haven't had gWallet running on this device before, or you are coming from a clean install: All you need are the two files from the skynote thread, and follow his instructions (It's near the bottom on that post). Then using root explore or the like, Change the items of the build.prop that are in RED. After changing the build.prop you have to reboot for settings to take effect.
nosmohtac said:
So you only had to change the text in red and now it's working? I have no problem editing the buildprop, I'm just unclear if there are any other lines that need to be edited.
---------- Post added at 07:27 AM ---------- Previous post was at 07:19 AM ----------
I changed all of the items in red, but when opening wallet I get an"insufficient secure element privelages for this system image (release keys)." message.
Click to expand...
Click to collapse
I only changed the ones I've marked in red. I found this that may help you on the secure elements thing. Basically, from what I can tell, is you didn't reset, or didn't get a chance to reset your existing google wallet on the phone. If you use the third zip from the skynote rom thread posted above you can (should be able to) reset everything. Then start with the first step.

joeavery2 said:
So, I changed the first three, tried a few different ways, each change I rebooted and confirmed that Google wallet would not launch. I'm posting the relevent part of the build.prop, Make sure you change all the items in RED :
Code:
ro.product.name=[COLOR="Red"]t0ltespr[/COLOR]
ro.product.device=[COLOR="red"]t0ltespr[/COLOR]
ro.product.board=smdk4x12
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=true
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=exynos4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=[COLOR="red"] t0ltespr[/COLOR]
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=[COLOR="red"]t0ltespr[/COLOR]-user 4.1.2 JZO54K I317UCAMA4 release-keys
ro.build.fingerprint=samsung/[COLOR="red"]t0ltespr/t0ltespr[/COLOR]:4.1.2/ JZO54K /I317UCAMA4:user/release-keys
I tried building a Zip from it but it failed and I don't have time to mess with it ATM.
---------- Post added at 12:28 PM ---------- Previous post was at 11:41 AM ----------
Ok I removed Google wallet via the Wallet app delete from device, I then used the skynote done with wallet revert zip. I rebooted. With Build.prop still showing as a sprint device I was able to download the app, however it would not initialize, it hung. So instead I ran the SkyNote_google_wallet_step1 zip. Initialized Google wallet, Then installed the Sprint edited version of Build.prop. The last step is equivalent to what happens with the SkyNote_google_wallet_finalize.zip which only adjust the build.prop back to ATT Note from Galaxy nexus.
Basically the second step is all that changes, instead of using the finalize zip to set the build.prop to att, we need to set it to sprint. Since I currently can't get the zip to work, your stuck editing the build.prop on your own, unless someone else can manage to copy/paste it, just replace the one in the SkyNote_google_wallet_finalize.zip under system with a windows machine and try installing it.
Key thing to note. If you can get google wallet to initialize after the first step, let it finish and you'll get a notification that "google wallet is ready to use" At this point you could just leave the phone as is. The issue is that S-Pen apps won't work, as they check to see that the phone is a Note vs a Nexus. If you can't get this part to work then you have something else going on, like you un-installed google wallet incorrectly and it's locked up now. You may try the google wallet revert zip from skynote thread. It seems to me that the issue is that google wallet creates a bunch of files on the device needed to make things work properly. If they are not all deleted (un-installing the app or apk doesn't do this) then it will cause issues.
Anyway, I was able to uninstall everything, start from scratch and install it all again. I currently have the build.prop mod'd to be a sprint Note2 T0ltespr and Both Google Wallet and S-pen apps work.
Hopefully this is helpful!
Click to expand...
Click to collapse
ok i try this step but still not work so im kind confuse
1. install step 1 flash and add sprint build prop then setup up wallet , but fail ,
2nd try flash remove wallet zip and try again still fail
so please tell me step by step

Ok so I got it working but it says unsupported device any one have any ideas.

jjr3211 said:
Ok so I got it working but it says unsupported device any one have any ideas.
Click to expand...
Click to collapse
Working means you actually were able to get pass "setting up payment method" screen and seeing already registered card and/or were able to add another credit card?
Unsupported Device means your phone is rooted..
Just use modaco tool kit to hide that..

dvdmkr said:
Working means you actually were able to get pass "setting up payment method" screen and seeing already registered card and/or were able to add another credit card?
Unsupported Device means your phone is rooted..
Just use modaco tool kit to hide that..
Click to expand...
Click to collapse
yes it is working as it should be. and not to sound really stupid where do I get the modaco tool kit from.

jjr3211 said:
yes it is working as it should be. and not to sound really stupid where do I get the modaco tool kit from.
Click to expand...
Click to collapse
Can someone tell all the detail to get wallet to work please
Sent from my SAMSUNG-SGH-I317 using xda premium

dvdmkr said:
Working means you actually were able to get pass "setting up payment method" screen and seeing already registered card and/or were able to add another credit card?
Unsupported Device means your phone is rooted..
Just use modaco tool kit to hide that..
Click to expand...
Click to collapse
Thanks got it all sorted out and working just got to try it out here in the next day or so. Thanks for your help.