Develop Bugs

Which RUU I need

Vilken fil behöver jag för att gå tillbaka till stock? mvh Andreas
version: 0.5a
version-bootloader: 0.96.0000
version-baseband: 1.1204.105.14
version-cpld: None
version-microp: None
version-main: 1.29.771.11
product: endeavoru
platform: HBOOT-T30S
modelid: PJ4610000
cidnum: None
battery-status: good
battery-voltage: 3789mV
devpower: 36
partition-layout: None
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0

1.29.771.11
Search in the stock roms thread in development section, you can find it
Sent from my HTC One X using Tapatalk 2

[Please Help] HTC D820F [A51_thul] Firmware

Getvar Info
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT523YC02286
(bootloader) imei: 355719060647100
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: a51_tuhl
(bootloader) platform: hTCBmsm8939
(bootloader) modelid: 0PFJ50000
(bootloader) cidnum: HTC__621
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 9a24b188
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) mfg-name: 0001
Bootloader Pict
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP Status Pict
I hope someone will help me. I need hboot or firmware or backup system in twrp. I accidentally pressed the "wipe system" button on twrp and I forgot not to have it checked. Thank you before.

me 2 need ruu
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 3.19.0.0000
INFOversion-baseband: [email protected]
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.17.980.3
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT68YYC03089
INFOimei: 355719062239864
INFOimei2: Not Support
INFOmeid: 00000000000000
INFOproduct: a51_tuhl
INFOplatform: hTCBmsm8939
INFOmodelid: 0PFJ50000
INFOcidnum: OPTUS001
INFObattery-status: good
INFObattery-voltage: 0mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: a82a385a
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOmfg-name: 0001
all: Done!
finished. total time: 0.019s
---------- Post added at 03:21 PM ---------- Previous post was at 03:08 PM ----------
Assalavy said:
Getvar Info
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT523YC02286
(bootloader) imei: 355719060647100
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: a51_tuhl
(bootloader) platform: hTCBmsm8939
(bootloader) modelid: 0PFJ50000
(bootloader) cidnum: HTC__621
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 9a24b188
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) mfg-name: 0001
Bootloader Pict
TWRP Status Pict
I hope someone will help me. I need hboot or firmware or backup system in twrp. I accidentally pressed the "wipe system" button on twrp and I forgot not to have it checked. Thank you before.
Click to expand...
Click to collapse
http://gsm-firmware.com/index.php?a=browse&b=file-info&id=12607
---------- Post added at 03:21 PM ---------- Previous post was at 03:21 PM ----------
http://gsm-firmware.com/index.php?a=browse&b=file-info&id=12607

bikku.gupta said:
me 2 need ruu
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 3.19.0.0000
INFOversion-baseband: [email protected]
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.17.980.3
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT68YYC03089
INFOimei: 355719062239864
INFOimei2: Not Support
INFOmeid: 00000000000000
INFOproduct: a51_tuhl
INFOplatform: hTCBmsm8939
INFOmodelid: 0PFJ50000
INFOcidnum: OPTUS001
INFObattery-status: good
INFObattery-voltage: 0mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: a82a385a
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOmfg-name: 0001
all: Done!
finished. total time: 0.019s
Click to expand...
Click to collapse
I can understand. This firmware for me?

Firmware
Needed htc d820f firmware. Please give me download link

Manual update for retcn device possible?

Hi,
I have got the golden retcn version of the Moto Z2 Force. Unfortunately, it is still on Android version 8, and I would like to change this. Is this possible? If so, could you please point me in the right direction? I do not want Lineage OS, only the updated stock rom. And I do not care much about SafetyNet.
SKU: XT1789-05
Android 8.0.0
Software channel: retcn
Thanks,
Mark

mark_14 said:
Hi,
I have got the golden retcn version of the Moto Z2 Force. Unfortunately, it is still on Android version 8, and I would like to change this. Is this possible? If so, could you please point me in the right direction? I do not want Lineage OS, only the updated stock rom. And I do not care much about SafetyNet.
SKU: XT1789-05
Android 8.0.0
Software channel: retcn
Thanks,
Mark
Click to expand...
Click to collapse
The golden rule when it comes to pie is, don't flash any pie firmware that isn't for your variant. Once you upgrade to pie modems you can't go back to oreo, and if the modem isn't right you won't have a baseband and possibly no way to fix it. That being said, many of the retail variants have the same firmware so it might be possible for you to upgrade properly. Boot into bootloader and run getvar command, then post the results so we can see what you're on.
PHP:
adb reboot bootloader
fastboot getvar all
fastboot reboot

41rw4lk said:
Boot into bootloader and run getvar command, then post the results so we can see what you're on.
Click to expand...
Click to collapse
Thanks for your fast response. These are the results:
Code:
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-nash_retcn-013cc51-180201
(bootloader) product: nash
(bootloader) board: nash
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: CHINA
(bootloader) storage-type: UFS
(bootloader) ufs: 64GB SAMSUNG KLUCG4J1ED-B0C1 FV=0200
(bootloader) ram: 4GB SKHYNIX LP4x DIE=16Gb M5=06 M6=04 M7=00 M8=11
(bootloader) cpu: MSM8998 2.1 (4)
(bootloader) serialno: <removed>
(bootloader) cid: 0x000B
(bootloader) channelid: 0xc1
(bootloader) uid: 5DE0141F
(bootloader) securestate: flashing_unlocked
(bootloader) verity-state: logging
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: <removed>
(bootloader) meid:
(bootloader) date: 03-29-2018
(bootloader) sku: XT1789-05
(bootloader) battid: SNN5987A
(bootloader) battery-voltage: 3691
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/nash/nash:8.0.0/OPXS27.10
(bootloader) ro.build.fingerprint[1]: 9-52-10/12:user/release-keys
(bootloader) poweroffalarm: 1
(bootloader) ro.build.version.full[0]: Blur_Version.27.411.12.nash.retai
(bootloader) ro.build.version.full[1]: l.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.4.r1-04300-8x98.0
(bootloader) version-baseband: M8998_20207.117.02.41-01.01R NCD
(bootloader) kernel.version[0]: Linux version 4.4.78-perf-g33eec99 (huds
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 20150
(bootloader) kernel.version[2]: 123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Sun Nov 4 09:34:03 CST 2018
(bootloader) abl.git: MBM-3.0-nash_retcn-013cc51-180201
(bootloader) xbl.git: MBM-3.0-nash_retcn-4ee2102-180201
(bootloader) pmic.git: MBM-3.0-nash_retcn-4ee2102-180201
(bootloader) rpm.git: MBM-3.0-nash_retcn-d3e45a4-180201
(bootloader) tz.git: MBM-3.0-nash_retcn-f4e3658-dirty-180201
(bootloader) hyp.git: MBM-3.0-nash_retcn-f4e3658-dirty-180201
(bootloader) devcfg.git: MBM-3.0-nash_retcn-f4e3658-dirty-180201
(bootloader) cmnlib.git: MBM-3.0-nash_retcn-f4e3658-dirty-180201
(bootloader) cmnlib64.git: MBM-3.0-nash_retcn-f4e3658-dirty-180201
(bootloader) keymaster.git: MBM-3.0-nash_retcn-f4e3658-dirty-180201
(bootloader) storsec.git: MBM-3.0-nash_retcn-f4e3658-dirty-180201
(bootloader) prov.git: MBM-3.0-nash_retcn-f4e3658-dirty-180201
(bootloader) qe: qe 0/0
(bootloader) frp-state: no protection (144)
(bootloader) ro.carrier: retcn
(bootloader) current-slot: _a
(bootloader) running-bl-slot: _a
(bootloader) running-boot-lun: 2
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 0

I join the question. I have exactly the same results from 'fastboot getvar all ' command. Also i have compilation number OPXS27.109-34-21, which is different than NASH_RETCN firmware on lolinet

forgottennick said:
I join the question. I have exactly the same results from 'fastboot getvar all ' command. Also i have compilation number OPXS27.109-34-21, which is different than NASH_RETCN firmware on lolinet
Click to expand...
Click to collapse
This should be a newer firmware version for your device.
https://mirrors.lolinet.com/firmware/moto/nash_retcn/official/RETCN/
XT1789-05_NASH_RETCN_8.0.0_OCX27.138-29_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Sent from my payton_sprout using XDA Labs

mot e 5 play xt1921-1 OTA file download pleaae

Lost imie and baseband.tried flash roms but keep getting message gpt..bin error spent like a week trying to figure this out please help.

ghettozo said:
Lost imie and baseband.tried flash roms but keep getting message gpt..bin error spent like a week trying to figure this out please help.
Click to expand...
Click to collapse
What does getvar all say?
Code:
fastboot getvar all
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com

sd_shadow said:
What does getvar all say?
Code:
fastboot getvar all
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
Click to expand...
Click to collapse
PS C:\Users\Me\Downloads\ADB FASTBOOT FILES WINDOWS> fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8917-BE.4F
(bootloader) product: james
(bootloader) board: james
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 7
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8917
(bootloader) serialno: ZY322RBWLD
(bootloader) cid: 0x0032
(bootloader) channelid: 0x81
(bootloader) uid: 7053A6DC00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Volume down key pressed
(bootloader) imei: 351839090672631
(bootloader) meid:
(bootloader) date: 05-22-2018
(bootloader) sku: XT1921-1
(bootloader) carrier_sku: XT1921-1
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint[0]: motorola/james_t_f/james_f:8.0.0/O
(bootloader) ro.build.fingerprint[1]: CP27.91-51-4/4:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.211.4.james_t.t.e
(bootloader) ro.build.version.full[1]: n.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-g5480efb-0001
(bootloader) kernel.version[1]: 6-gd2768b6 ([email protected]) (gcc ver
(bootloader) kernel.version[2]: sion 4.8 (GCC) ) #1 SMP PREEMPT Fri Jul
(bootloader) kernel.version[3]: 20 10:36:48 CDT 2018
(bootloader) sbl1.git: git=MBM-NG-VBE.4F-0-g8ffb6ee
(bootloader) rpm.git: git=02a07261-dirty
(bootloader) tz.git: git=7ddbcd0b3e
(bootloader) devcfg.git: git=7ddbcd0b3e
(bootloader) keymaster.git: git=7ddbcd0b3e
(bootloader) cmnlib.git: git=7ddbcd0b3e
(bootloader) cmnlib64.git: git=7ddbcd0b3e
(bootloader) prov.git: git=7ddbcd0b3e
(bootloader) aboot.git: git=MBM-NG-VBE.4F-0-g4e3d3ac
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: bwaca
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.316s

MOD ACTION:
Thread closed. The same issue is being discussed HERE

Question Australian Moto G30 stock rom

Hi.
I've just bought an unlocked Austarlian model Moto G30. I'd like to install Magisk but I'm having trouble locating a stock rom. No roms are found either by searching, normal connection or fastboot connection by the Lenovo Rescue and Smart Assistance app. A dump from fastboot reads as follows (with serial numbers, IMEIs omitted):
C:\adb>fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-caprip_retail-7d6811cfd7-210209
(bootloader) product: caprip
(bootloader) board: caprip
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: EUAPEM
(bootloader) storage-type: eMMC
(bootloader) emmc: 128GB SAMSUNG DV6DAB RV=08 PV=02 FV=0000000000000002
(bootloader) ufs: N/A
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5-M8=01 07 01 12
(bootloader) cpu: SM_KAMORTA_H 1.0
(bootloader) serialno: *****
(bootloader) cid: 0x0032
(bootloader) channelid: 0x51
(bootloader) uid: 1AFA7FED
(bootloader) securestate: oem_locked
(bootloader) factory-modes: disabled
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 804474880
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: *****
(bootloader) imei2: *****
(bootloader) meid:
(bootloader) date: 07-21-2021
(bootloader) sku: XT2129-2
(bootloader) carrier_sku: XT2129-2
(bootloader) battid: SB18C98449
(bootloader) battery-voltage: 3976
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) poweroffalarm: 0
(bootloader) ro.carrier: retapac
(bootloader) ro.build.fingerprint[0]: motorola/caprip_retailn/caprip:11/
(bootloader) ro.build.fingerprint[1]: RRC31.Q1-3-34-1/7ff77b:user/releas
(bootloader) ro.build.fingerprint[2]: e-keys
(bootloader) ro.build.version.qcom: LA.UM.9.15.r1-01800-KAMORTA.0
(bootloader) version-baseband[0]: HAK10_18.534.02.65R CAPRIP_EUAPEMDSDS_
(bootloader) version-baseband[1]: CUST
(bootloader) kernel.version[0]: Linux version 4.19.136-perf+ ([email protected]
(bootloader) kernel.version[1]: roid-build) (clang version 10.0.7 for An
(bootloader) kernel.version[2]: droid NDK, GNU ld (binutils-2.27-bd24d23
(bootloader) kernel.version[3]: f) 2.27.0.20170315) #1 SMP PREEMPT Tue F
(bootloader) kernel.version[4]: eb 9 10:48:17 CST 2021
(bootloader) git:xbl: MBM-3.0-caprip_retail-e9fd6e369-210209
(bootloader) git:xbl_config: MBM-3.0-caprip_retail-e9fd6e369-210209
(bootloader) git:abl: MBM-3.0-caprip_retail-7d6811cfd7-210209
(bootloader) git:rpm: MBM-3.0-caprip_retail-f43cd45-210209
(bootloader) git:tz: MBM-3.0-caprip_retail-dc0cdb2b-210209
(bootloader) git:hyp: MBM-3.0-caprip_retail-dc0cdb2b-210209
(bootloader) git:devcfg: MBM-3.0-caprip_retail-dc0cdb2b-210209
(bootloader) git:keymaster: MBM-3.0-caprip_retail-a2e51bf-210209
(bootloader) git:storsec: MBM-3.0-caprip_retail-a2e51bf-210209
(bootloader) git:uefisecapp: MBM-3.0-caprip_retail-a2e51bf-210209
(bootloader) gitrov: MBM-3.0-caprip_retail-dc0cdb2b-210209
(bootloader) git:qupfw: MBM-3.0-caprip_retail-349f4d1-210209
(bootloader) frp-state: no protection (0)
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 0
(bootloader) logical-block-size: 0x200
(bootloader) erase-block-size: 0x200
(bootloader) is-userspace: no
(bootloader) pcb-part-no: SP69A6PBEP
(bootloader) primary-display: djn_nt36525c_652_vid_display
(bootloader) secondary-display:
all: listed above
finished. total time: 0.244s
​So far I've only managed to find one site (under a couple different names/addresses) that has the (bootloader) ro.build.fingerprint[1] and (bootloader) ro.build.fingerprint[2] strings of:
RRC31.Q1-3-34-1/7ff77b:user/release-keys
It doesn't look like the file has been downloaded at all so I'm a little dubious. Can anyone possibly point me to a surer source, or another stock rom that has worked with an Australian moto g30 and Magisk?
Cheers.

cedwich said:
Hi.
I've just bought an unlocked Austarlian model Moto G30. I'd like to install Magisk but I'm having trouble locating a stock rom. No roms are found either by searching, normal connection or fastboot connection by the Lenovo Rescue and Smart Assistance app. A dump from fastboot reads as follows (with serial numbers, IMEIs omitted):
C:\adb>fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-caprip_retail-7d6811cfd7-210209
(bootloader) product: caprip
(bootloader) board: caprip
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: EUAPEM
(bootloader) storage-type: eMMC
(bootloader) emmc: 128GB SAMSUNG DV6DAB RV=08 PV=02 FV=0000000000000002
(bootloader) ufs: N/A
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5-M8=01 07 01 12
(bootloader) cpu: SM_KAMORTA_H 1.0
(bootloader) serialno: *****
(bootloader) cid: 0x0032
(bootloader) channelid: 0x51
(bootloader) uid: 1AFA7FED
(bootloader) securestate: oem_locked
(bootloader) factory-modes: disabled
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 804474880
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: *****
(bootloader) imei2: *****
(bootloader) meid:
(bootloader) date: 07-21-2021
(bootloader) sku: XT2129-2
(bootloader) carrier_sku: XT2129-2
(bootloader) battid: SB18C98449
(bootloader) battery-voltage: 3976
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) poweroffalarm: 0
(bootloader) ro.carrier: retapac
(bootloader) ro.build.fingerprint[0]: motorola/caprip_retailn/caprip:11/
(bootloader) ro.build.fingerprint[1]: RRC31.Q1-3-34-1/7ff77b:user/releas
(bootloader) ro.build.fingerprint[2]: e-keys
(bootloader) ro.build.version.qcom: LA.UM.9.15.r1-01800-KAMORTA.0
(bootloader) version-baseband[0]: HAK10_18.534.02.65R CAPRIP_EUAPEMDSDS_
(bootloader) version-baseband[1]: CUST
(bootloader) kernel.version[0]: Linux version 4.19.136-perf+ ([email protected]
(bootloader) kernel.version[1]: roid-build) (clang version 10.0.7 for An
(bootloader) kernel.version[2]: droid NDK, GNU ld (binutils-2.27-bd24d23
(bootloader) kernel.version[3]: f) 2.27.0.20170315) #1 SMP PREEMPT Tue F
(bootloader) kernel.version[4]: eb 9 10:48:17 CST 2021
(bootloader) git:xbl: MBM-3.0-caprip_retail-e9fd6e369-210209
(bootloader) git:xbl_config: MBM-3.0-caprip_retail-e9fd6e369-210209
(bootloader) git:abl: MBM-3.0-caprip_retail-7d6811cfd7-210209
(bootloader) git:rpm: MBM-3.0-caprip_retail-f43cd45-210209
(bootloader) git:tz: MBM-3.0-caprip_retail-dc0cdb2b-210209
(bootloader) git:hyp: MBM-3.0-caprip_retail-dc0cdb2b-210209
(bootloader) git:devcfg: MBM-3.0-caprip_retail-dc0cdb2b-210209
(bootloader) git:keymaster: MBM-3.0-caprip_retail-a2e51bf-210209
(bootloader) git:storsec: MBM-3.0-caprip_retail-a2e51bf-210209
(bootloader) git:uefisecapp: MBM-3.0-caprip_retail-a2e51bf-210209
(bootloader) gitrov: MBM-3.0-caprip_retail-dc0cdb2b-210209
(bootloader) git:qupfw: MBM-3.0-caprip_retail-349f4d1-210209
(bootloader) frp-state: no protection (0)
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 0
(bootloader) logical-block-size: 0x200
(bootloader) erase-block-size: 0x200
(bootloader) is-userspace: no
(bootloader) pcb-part-no: SP69A6PBEP
(bootloader) primary-display: djn_nt36525c_652_vid_display
(bootloader) secondary-display:
all: listed above
finished. total time: 0.244s
​So far I've only managed to find one site (under a couple different names/addresses) that has the (bootloader) ro.build.fingerprint[1] and (bootloader) ro.build.fingerprint[2] strings of:
RRC31.Q1-3-34-1/7ff77b:user/release-keys
It doesn't look like the file has been downloaded at all so I'm a little dubious. Can anyone possibly point me to a surer source, or another stock rom that has worked with an Australian moto g30 and Magisk?
Cheers.
Click to expand...
Click to collapse
I think you know this but
You look for these lines
Code:
sku: XT2129-2
ro.carrier: retapac
product: caprip
ro.build.fingerprint:...RRC31.Q1-3-34-1/...
and
Code:
imei: *****
imei2: *****
Means you have Dual sim, there may be firmware that is for a single sim, you do not want to use that.
There a few sources for stock moto firmware.
I prefer LMSA, it is the official Moto flashing program for Windows
The 2 other sources I like are run by the same people
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
and
Moto Updates Tracker
An automated channel that tracks Motorola updates releases. By @vachounet and @yshalsager https://mirrors.lolinet.com/firmware/motorola More automated channels that you may like: @yshalsager_projects
t.me
Looks like you are running an older build and lolinet may have removed it already, you could use a newer version
you will need to flash the full firmware.
Moto Update Tracker has this
Codename: #capri
Carrier(s): Australia
Phone Model(s): XT2127-2-DS/PAMN0016AU
Version: RRBS31.Q1-3-34-1-2
Android: 11
Download: Here
Click to expand...
Click to collapse
CAPRI_RETAIL_RRBS31.Q1-3-34-1-2_subsidy-DEFAULT_regulatory-XT2127-2-APEM-SAR_CFC.xml.zip
again if you have a Windows PC I recommend LMSA
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com

sd_shadow said:
I think you know this but
You look for these lines
Code:
sku: XT2129-2
ro.carrier: retapac
product: caprip
ro.build.fingerprint:...RRC31.Q1-3-34-1/...
and
Code:
imei: *****
imei2: *****
Means you have Dual sim, there may be firmware that is for a single sim, you do not want to use that.
There a few sources for stock moto firmware.
I prefer LMSA, it is the official Moto flashing program for Windows
The 2 other sources I like are run by the same people
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
and
Moto Updates Tracker
An automated channel that tracks Motorola updates releases. By @vachounet and @yshalsager https://mirrors.lolinet.com/firmware/motorola More automated channels that you may like: @yshalsager_projects
t.me
Looks like you are running an older build and lolinet may have removed it already, you could use a newer version
you will need to flash the full firmware.
Moto Update Tracker has this
CAPRI_RETAIL_RRBS31.Q1-3-34-1-2_subsidy-DEFAULT_regulatory-XT2127-2-APEM-SAR_CFC.xml.zip
again if you have a Windows PC I recommend LMSA
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com
Click to expand...
Click to collapse
Awesome, many thanks for your help and suggestions, i'll definately take them on board. I tried the LMSA tool straight up and it couldn't find any compatable stock roms via either usb debug or fastboot. I also couldn't find anything searching by name. I did trying searching a few sites for stock roms but the phone doesn't show system updates as being available so i didn"t think to search on more recent versions. *blushes* Thanks again for your digging, you've hopefully helped save me a few more grey hairs!