Related
Hi guys, im using the miui rom and i can overlclock to 1113 i would like to overclock to 1.3 or more than 1.2 and get about 45 in linpack.please tell me which rom is the best and overclocking program. if you may you could write me how to flash it. Thank You
salata1500 said:
Hi guys, im using the miui rom and i can overlclock to 1113 i would like to overclock to 1.3 or more than 1.2 and get about 45 in linpack.please tell me which rom is the best and overclocking program. if you may you could write me how to flash it. Thank You
Click to expand...
Click to collapse
To tell you the truth, no overclocking Suggestions, be, and the CPU
I know that Playpetepp uses my kernel at 1.267 GHz
Edit.. Damn just saw the original date
To avoid mess up in tread i decide to separate kernel from Rom.
This is going to be my Kernel palace
GB Kernel V1 include:
Overclock to max stable 1836 mhz
Under-volt all frequency
New low power level (Saves ~8ma at battery for low fps apps)
Add 5 more frequency table
Use readl_relaxed and writel_relaxed
Add interactive, smartassv2, lagfree governor
Implementation of 2-Phase OnDemand
P930 Gingerbread Kernel V1 (Work on Nitro HD and Bell Optimus LTE)
SU640 Gingerbread Kernel V1
LU6200 Gingerbread Kernel V1
P930 CM9 Kernel V4
Mirror
HO!NO! GitHub
Sweet thank you ! Cant wait for a CM9 hehe
Sent from my LG-P930 using XDA
Thanks for all ur work!
Sent from my LG-P930 using xda premium
Advice
HO!NO! said:
To avoid mess up in tread i decide to separate kernel from Rom.
This is going to be my Kernel palace
GB Kernel V1 include:
Overclock to max stable 1836 mhz
Under-volt all frequency
New low power level (Saves ~8ma at battery for low fps apps)
Add 5 more frequency table
Use readl_relaxed and writel_relaxed
Add interactive, smartassv2, lagfree governor
Implementation of 2-Phase OnDemand
P930 Gingerbread Kernel V1 (Work on Nitro HD and Bell Optimus LTE)
SU640 Gingerbread Kernel V1
LU6200 Gingerbread Kernel V1
P930 CM9 Kernel to come when CM9 will be in RC stage....
Click to expand...
Click to collapse
Sir ,maybe you can improve your kernal for deep searching the cm9 kernal,hoping that would be a good resource for your ref.Meanwhile expecting your new ver Of your home-made kernal. keep up your job！
HO!NO! said:
To avoid mess up in tread i decide to separate kernel from Rom.
This is going to be my Kernel palace
GB Kernel V1 include:
Overclock to max stable 1836 mhz
Under-volt all frequency
New low power level (Saves ~8ma at battery for low fps apps)
Add 5 more frequency table
Use readl_relaxed and writel_relaxed
Add interactive, smartassv2, lagfree governor
Implementation of 2-Phase OnDemand
P930 Gingerbread Kernel V1 (Work on Nitro HD and Bell Optimus LTE)
SU640 Gingerbread Kernel V1
LU6200 Gingerbread Kernel V1
P930 CM9 Kernel to come when CM9 will be in RC stage....
Click to expand...
Click to collapse
Can u change the charging animation of LU6200 when it's power off. The original one is really ugly. Thank you very much.
great job! Thanks very much.
THX 4 UR HARD WORK 4 OUR LU su!
啤酒是必须的~
Can't wait for CM9 kernal! Anyone see an improvement in battery life with the current kernals?
Thank you for all your work in main this phone one of the best out there
HO!NO! said:
To avoid mess up in tread i decide to separate kernel from Rom.
This is going to be my Kernel palace
Click to expand...
Click to collapse
restored my phone to original att nitro hd rom, then flashed the corresponding kernel, wiped dalvik cache and rebooted.. now i dont have root access? any way to resolve this issue besides rerooting it.. the kernel shouldnt affect it right?
kumayam said:
restored my phone to original att nitro hd rom, then flashed the corresponding kernel, wiped dalvik cache and rebooted.. now i dont have root access? any way to resolve this issue besides rerooting it.. the kernel shouldnt affect it right?
Click to expand...
Click to collapse
Your original nitro rom is maybe not rooted...
And no kernel does not change one thing about root.
HO!NO! said:
Your original nitro rom is maybe not rooted...
And no kernel does not change one thing about root.
Click to expand...
Click to collapse
i rooted the stock att nitro rom with super on click, then i made a backup and thats what ive been using, everytime i flash the corresponding kernel, it says i have no root access
Edit: I just rerooted it using super one click and everything works fine now, thanks for everything
rsalan said:
Can't wait for CM9 kernal! Anyone see an improvement in battery life with the current kernals?
Click to expand...
Click to collapse
Wasn't much better than on Bell Stock ROM the first days... but now after some days with tweaking and battery calibration the best battery life i have had so far!
Cromson said:
Wasn't much better than on Bell Stock ROM the first days... but now after some days with tweaking and battery calibration the best battery life i have had so far!
Click to expand...
Click to collapse
What sort of tweaks?
rsalan said:
What sort of tweaks?
Click to expand...
Click to collapse
heres some tweaks
http://androidforums.com/triumph-al...-performance-tweaks-updated-04-03-2012-a.html
http://forum.xda-developers.com/showthread.php?t=1560588
http://forum.xda-developers.com/showthread.php?t=1227269
http://forum.xda-developers.com/showthread.php?t=1289554
init.d support
Any chance of adding init.d support? I have a set of sick tweaks that really promotes battery life and performance.
However, I can only install part of it (manually).
thomas.raines said:
Any chance of adding init.d support? I have a set of sick tweaks that really promotes battery life and performance.
However, I can only install part of it (manually).
Click to expand...
Click to collapse
init.d support is already in my rom, this is why i don't see important to make it native in the first version.
In next release it will be native.
Thank you very much
HO!NO! said:
init.d support is already in my rom, this is why i don't see important to make it native in the first version.
In next release it will be native.
Click to expand...
Click to collapse
Which ROM? I installed Kernelpan1c Nitro HD ROM and my wife is liking it very much (it's her phone). But she wants me to hook it up with my init.d scripts as she knows how much battery life and performance is improved. However, when I tried to add the init.d forlder manually, the phone soft bricked. I guess I should post this in the ROMs thread, but I am using this kernel, and as far as I knew, in order for init.d scripts to work, your kernel has to be compatable.
I love this kernel but I love to use cm9.
I know the developer here wants to wait cm9 to rc stage in order to make the kernel for cm9, I would like to ask if you can change your mind cos cm9 original kernel is so lagging. Pls help!
Sent from my LG-P930 using xda premium
right now i have the stock rom installed (touchwiz) so i did not change the rom or something, but i installed an oc that overclocks the processor to 1.8GHZ, if i flash the revolution rom, is that ok? can i do that with the overclock applied? i don't want to destroy this device i just got it a couple of days ago and i want to have the revolution rom with 1.8ghz oc, so i installed the oc fist now i need to flash.
Please help!!
Can i just flash the ROM or do i need to do something about the kernel before
ProGadgetReviews said:
right now i have the stock rom installed (touchwiz) so i did not change the rom or something, but i installed an oc that overclocks the processor to 1.8GHZ, if i flash the revolution rom, is that ok? can i do that with the overclock applied? i don't want to destroy this device i just got it a couple of days ago and i want to have the revolution rom with 1.8ghz oc, so i installed the oc fist now i need to flash.
Click to expand...
Click to collapse
If im not mistaken, you need to have rooted before you can use those overclock apps.
If your devices still remain stock kernel and stock rom. Please go to stickies or dr.ketan thread and follow the guide root the devices and install cwm. Then you can flash anything you want.
Sent from my GT-N7100 using xda premium
My device is rooted and I am using a custom kernel. I want to flash the revolution ROM. And also have the custom kernel installed. Do I have to return the kernel to stock to flash? Or can I just flash the ROM
Update: I have successfully flashed revolution ROM on my note. I now want to use a custom oc kernel clocking the processor at 1.8GHz. Is there any risk in that? Before I installed the ROM is was just fine, but i don't know if it's compatible with the revolution ROM.
ProGadgetReviews said:
Update: I have successfully flashed revolution ROM on my note. I now want to use a custom oc kernel clocking the processor at 1.8GHz. Is there any risk in that? Before I installed the ROM is was just fine, but i don't know if it's compatible with the revolution ROM.
Click to expand...
Click to collapse
Since you have fully devices at the moment. You can download persues or notecore kernel to achieved 1.8ghz speed.
Sent from my GT-N7100 using xda premium
---------- Post added at 06:13 PM ---------- Previous post was at 06:10 PM ----------
Im not very sure about the risk of overclock proccesor at higher speed. Since im never use this at all because of our note have sufficient speed and responsive to handle all kind of task.
Sent from my GT-N7100 using xda premium
OK I over clocked it and for some reason the performance is terrible. I did a factory reset and flashed the ROM again and every thing sense to be working fine. But one thing top be noted is that after the over clock i did the phone performance was terrible but benchmark scores were remarkable. I secord 7900 on quadrant which is pretty sick. So i guess I'll Hyatt stick with the revolution ROM with no over clock.
Peak speeds are just one factor, usually not very useful apart from benchmarks. Latency and responsiveness (ie. How the CPU ramps up a reacts to loads) is far more important in perceived smoothness.
Sent from my GT-N7100 using xda app-developers app
LEALD D851 KERNEL
Will update post later when I have more time available...
This is based on T-mobile Lollipop 20B Source Code
Please flash at your own risk, I have been testing on my phone for a while now, also with the help of @bofiana, and everything seems to be running smoothly for the most part so it seemed like time to release the kernel for the public....
Source: Will post later when I clean up my Github a little more I promise
Wouldn't have been possible without these guys...
@Tectas
https://github.com/tectas/android_ke...e/rin-lollipop @Skin1980
https://github.com/Skin1980/D855-kernel/tree/lollipop @engine95
https://github.com/engine95/navel-855
I am aware not everything on this kernel may run smoothly...But for the most part everything seems to be running fine...
Current Known Bugs:
V1.0 - 6/19/2015
GPU Governor CPUBW HWMON seems to reboot device on selection, left on the kernel for now will deal with it later...
GPU max freq doesn't to to stick after latest underclocking code adjustments...
Kernel Features:
V1.0 - 6/19/2015
T-Mobile 20e source code merge
UBERTC 4.9 Toolchain
-03 Optimizations
KCAL -Savoca
GPU Underclock
CPU Governors (Lionheart, ZZMOOVE, SmartavssV2, as well as others)
IO Schedulers (ZEN, VR, TRIPNDROID, FIFO as well as others)
Intellithermal - Faux
Intelliplug - Faux
TCP Congestion Algorithms (Westwood, Reno, as well as others)
Boot up time patch
Simple OnDemand GPU Governor- Faux
Undervolting
Power efficient workqueues
----------------------------------------
V2.2 BETA
*Previous 2.0 BETA version had some obvious issues with Maximum CPU freq scaling that I addressed and is now properly working *
This version for now is going to be released as a beta because I promised a new version but I still haven't quite gotten it to the point I wanted.
In the process of integrating STweaks and Synapse. Expect bugs.
Rewrote all the hot plug code and updated it
Changed from original intelli thermal to Dorimanx's version.
Removed cpu boost and added Alucard's version.
Added all cpu govs from dorimanx's kernel.
Added generic sound controls.
Removed ZZMOOVE and TCP congestion additions for now. Will add back in the future.
Will update more thoroughly later as I am at work currently.
----------------------------------------
DOWNLOAD HERE
Download Beta
General Info and Knowledge:
I personally use Kernel Auditor to tune my Kernel, though Faux Clock or TricksterMOD would also work just fine...
XDA:DevDB Information
leald, Kernel for the T-Mobile LG G3
Contributors
leald
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2015-06-19
Created 2015-06-20
Last Updated 2015-06-19
Thank you!
Sent from my LG-D851 using XDA Free mobile app
Where is the download?
Sent from my LG-D851
i went to androidfilehost and searched for OP name and found it. /wink
Sorry it didnt save my post with the download link. I have updated it with the link.
Congrats on the great work. Thanks for the shout out and happy that i could help u test all this time. Thanks again for all ur work and happy ur sharing it with everyone now. I've had nothing but great performance and stability with this kernel so far.
BTW......i ran this kernel on the latest T-Mo 20E build and currently running it on Cloudy 2.3 which is based off of 20P source and running great with no issues. I use FauxClock to tweak kernel. Running smartassv2, tripndroid I/O, intellithermal and imtellidemand and get great performance and phone deep sleeps like a baby. I tried Lionheart governor at first but wasn't getting good deep sleep so someone might want to test that one out and sew how it is for them. [emoji106]
Sent from my LG-D851 using Tapatalk
I get LG Security Error when I flash on latest Cloudy rom.
EDIT: I fixed it by installing the 20E bootstack.
bofiana said:
Congrats on the great work. Thanks for the shout out and happy that i could help u test all this time. Thanks again for all ur work and happy ur sharing it with everyone now. I've had nothing but great performance and stability with this kernel so far.
BTW......i ran this kernel on the latest T-Mo 20E build and currently running it on Cloudy 2.3 which is based off of 20P source and running great with no issues. I use FauxClock to tweak kernel. Running smartassv2, tripndroid I/O, intellithermal and imtellidemand and get great performance and phone deep sleeps like a baby. I tried Lionheart governor at first but wasn't getting good deep sleep so someone might want to test that one out and sew how it is for them. [emoji106]
Sent from my LG-D851 using Tapatalk
Click to expand...
Click to collapse
Bofiana did you have to flash the 20e bootstack to?
modhack4life said:
Bofiana did you have to flash the 20e bootstack to?
Click to expand...
Click to collapse
Not sure if i had to bcuz i did anyways before i flashed Cloudy 2.3. So i never tried this kernel on Cloudy without the 20e bootstack. Sorry man.
Sent from my LG-D851 using Tapatalk
bofiana said:
Not sure if i had to bcuz i did anyways before i flashed Cloudy 2.3. So i never tried this kernel on Cloudy without the 20e bootstack. Sorry man.
Sent from my LG-D851 using Tapatalk
Click to expand...
Click to collapse
I'm running cloudy 2.3 as well. Just wondering if I need to flash the 20e bootstack before flashing this kernel?
LG G3 d851
modhack4life said:
I'm running cloudy 2.3 as well. Just wondering if I need to flash the 20e bootstack before flashing this kernel?
LG G3 d851
Click to expand...
Click to collapse
I am actually running this kernel on stock 20B firmware, I'm not sure why others are having trouble...
leald said:
I am actually running this kernel on stock 20B firmware, I'm not sure why others are having trouble...
Click to expand...
Click to collapse
So With what I'm currently running (Cloudy G3 2.3) I should be able to flash your kernel by itself without having to flash anything with it?
Does this come with color control? Lol i have no idea where this app came from
leald said:
I am actually running this kernel on stock 20B firmware, I'm not sure why others are having trouble...
Click to expand...
Click to collapse
I'm not sure if people r even having trouble, i think they're just scared ro flash on latest Cloudy Rom which is based off of 20p. I'm running ur kernel on Cloudy with no problem but i also flashed the 20e bootstack too.
People, if u flash kernel and ur on Cloudy and it boots fine then great! If not, then just flash 20e boostack and u should be good to go. Only real way to know is to try it. It's not really gonna hurt anything by flashing. And as always, perform a nandroid first just in case.
Sent from my LG-D851 using Tapatalk
rayraycarter4 said:
Does this come with color control? Lol i have no idea where this app came from
Click to expand...
Click to collapse
Yes it comes with KCAL support ?
Sent from my LG-D851 using Tapatalk
leald said:
Yes it comes with KCAL support ?
Sent from my LG-D851 using Tapatalk
Click to expand...
Click to collapse
Thanks man you rock
Ill just leave this here???
bofiana said:
Congrats on the great work. Thanks for the shout out and happy that i could help u test all this time. Thanks again for all ur work and happy ur sharing it with everyone now. I've had nothing but great performance and stability with this kernel so far.
BTW......i ran this kernel on the latest T-Mo 20E build and currently running it on Cloudy 2.3 which is based off of 20P source and running great with no issues. I use FauxClock to tweak kernel. Running smartassv2, tripndroid I/O, intellithermal and imtellidemand and get great performance and phone deep sleeps like a baby. I tried Lionheart governor at first but wasn't getting good deep sleep so someone might want to test that one out and sew how it is for them. [emoji106]
Sent from my LG-D851 using Tapatalk
Click to expand...
Click to collapse
Where is smartassv2 and intellidemand?
TheByteSmasher said:
Where is smartassv2 and intellidemand?
Click to expand...
Click to collapse
R u using an app to tweak the kernel? Something like Fauxclock or Trickster Mod? Smartassv2 is there, Intellidemand isn't.
Sent from my LG-D851 using Tapatalk
bofiana said:
R u using an app to tweak the kernel? Something like Fauxclock or Trickster Mod? Smartassv2 is there, Intellidemand isn't.
Sent from my LG-D851 using Tapatalk
Click to expand...
Click to collapse
I have all three (faux,truck and the one mentioned in the OP) I didn't see smartass (what section) and how did you get intellidemand?
I actually have rom pixel exp. 8.1.0 with kernel priima, would like to try some kernel that overclock gpu and cpu but still with nice battery
Kheppy said:
I actually have rom pixel exp. 8.1.0 with kernel priima, would like to try some kernel that overclock gpu and cpu but still with nice battery
Click to expand...
Click to collapse
How is the Battery Backup with this Kernel??
Any performance issues??
You can not create new thread that's not a Dev thread here
Does not exist!