Related
hello.
usually when I have a few flash the phone I like to leave the factory, which I put the factory oxa with partition marked in 5 files odin with pit, bootloader, code, modem (LJ2) and csc.
I've never had trouble oxa install the factory and I have done more than 20 times since upgrading to M16 (4.3) I have been unable to do the operation because when I have uploaded files to download odin and phone wire as I give to start the SET PARTITION makes an instant and I FAIL throws.
windows thereupon losing throws me Connect message pc / phone.
I've tried with two different pcs and does the same, they know they can be happening? the fault of the new base? I must do to stop factory new phone?
thank you very much
xavivts said:
hello.
usually when I have a few flash the phone I like to leave the factory, which I put the factory oxa with partition marked in 5 files odin with pit, bootloader, code, modem (LJ2) and csc.
I've never had trouble oxa install the factory and I have done more than 20 times since upgrading to M16 (4.3) I have been unable to do the operation because when I have uploaded files to download odin and phone wire as I give to start the SET PARTITION makes an instant and I FAIL throws.
windows thereupon losing throws me Connect message pc / phone.
I've tried with two different pcs and does the same, they know they can be happening? the fault of the new base? I must do to stop factory new phone?
thank you very much
Click to expand...
Click to collapse
Can SWe downgrade from 4.3 to 4.1.2?
lidootn said:
Can SWe downgrade from 4.3 to 4.1.2?
Click to expand...
Click to collapse
with cwm downgrade if you can make a nandroid backup, but I do it with odin to restore the factory.
regards
You can try to download default samsung firmware from sammobile and use Odin to install the firmware. For me it works.
Keanys said:
You can try to download default samsung firmware from sammobile and use Odin to install the firmware. For me it works.
Click to expand...
Click to collapse
Sure, thats better way xavivts.
Keanys said:
You can try to download default samsung firmware from sammobile and use Odin to install the firmware. For me it works.
Click to expand...
Click to collapse
Fataldose said:
Sure, thats better way xavivts.
Click to expand...
Click to collapse
thanks for your replies mates!!
I do not understand what is the difference of the files that I flash with factory oxa the samsung firmware.
I understand that the firmware in samfirmware there is only one file within a zip to put in pda only and oxa factory has 5 it is mentioned in the first post to leave the factory.
or you mean that first flash of a file and then the oxa factory?
thank you very much:laugh:
i"ve been stuck with this problem from a day now not able to downgrade . it gives me an error. and then tells me to connect to kies for recovery . if i try to flsh the 4.3 rom i'm not able to .after a system restart[comp] i'm able to boot 4.3 again can someone help me out :crying:
Vish2030 said:
i"ve been stuck with this problem from a day now not able to downgrade . it gives me an error. and then tells me to connect to kies for recovery . if i try to flsh the 4.3 rom i'm not able to .after a system restart[comp] i'm able to boot 4.3 again can someone help me out :crying:
Click to expand...
Click to collapse
recover through kies...............
happened to me also when i tried downgrading and raised my warranty void to 1
u cant downgrade as of now if u r on mk5
i tried to upgrade my s3 i accidentally falshed with correpted file('i renamed the file .mb5 to .tar) it stuck and showing that needed to connect kies
.. and kies not detecting my device and it wont boot into recovery mode but after search i rooted again through cf auto root and then it can enter into recovery mode is it bricked/not what happend to my device currently it can enter into both recovery &download mode ......
pls help me with this
ghjsdf9 said:
i tried to upgrade my s3 i accidentally falshed with correpted file('i renamed the file .mb5 to .tar) it stuck and showing that needed to connect kies
.. and kies not detecting my device and it wont boot into recovery mode but after search i rooted again through cf auto root and then it can enter into recovery mode is it bricked/not what happend to my device currently it can enter into both recovery &download mode ......
pls help me with this
Click to expand...
Click to collapse
Welcome to the forum! Your phone's hardly bricked if you can get to download and recovery modes. Flashing the correct (stock) firmware should get you back to working conditions. What Android version were you on prior to it being stuck and what were you trying to upgrade to?
Larry2999 said:
Welcome to the forum! Your phone's hardly bricked if you can get to download and recovery modes. Flashing the correct (stock) firmware should get you back to working conditions. What Android version were you on prior to it being stuck and what were you trying to upgrade to?
Click to expand...
Click to collapse
THANKS FOR WELCOME PARTY:
and for the rly tooo.
i can get into both download mode as well as recovery mode ..... i'm not clear with my phones model-in odin mode it showing "PRODUCT NAME:-SGH-I747M" on starting it is running 4.1.2 (zsemc1) version i am not clear with baseband etc.
and i'm not clear with supported varient versions when i flashed with different version in odin mode it showing differnt causes for different version
ex: "unsupported dev type","secure check fail sb12",securechech fail aboot" for three different versions
ghjsdf9 said:
THANKS FOR WELCOME PARTY:
and for the rly tooo.
i can get into both download mode as well as recovery mode ..... i'm not clear with my phones model-in odin mode it showing "PRODUCT NAME:-SGH-I747M" on starting it is running 4.1.2 (zsemc1) version i am not clear with baseband etc.
and i'm not clear with supported varient versions when i flashed with different version in odin mode it showing differnt causes for different version
ex: "unsupported dev type","secure check fail sb12",securechech fail aboot" for three different versions
Click to expand...
Click to collapse
i747M is for the Canadian and Mexican variants. If you were on stock 4.1.2, you should be able to Odin back to stock 4.1.1 or upgrade to 4.3 via custom recovery. You can go to the thread below to check the correct stock image for your phone based on carrier. Make sure you use the correct image as flashing the wrong version could hard brick your phone. Download to your PC and then flash. If you select the 4.3 version, you would need to flash custom recovery to your phone via Odin, save the file to a (micro) SD card and then flash via custom recovery.
http://forum.xda-developers.com/showthread.php?t=1739426
Let me know if this works for you.
Larry2999 said:
i747M is for the Canadian and Mexican variants. If you were on stock 4.1.2, you should be able to Odin back to stock 4.1.1 or upgrade to 4.3 via custom recovery. You can go to the thread below to check the correct stock image for your phone based on carrier. Make sure you use the correct image as flashing the wrong version could hard brick your phone. Download to your PC and then flash. If you select the 4.3 version, you would need to flash custom recovery to your phone via Odin, save the file to a (micro) SD card and then flash via custom recovery.
http://forum.xda-developers.com/showthread.php?t=1739426
Let me know if this works for you.
Click to expand...
Click to collapse
i'm Asian it worked for local networks before bricked so i'm not clear with choosing in versions... ["help me with it"]
ghjsdf9 said:
i'm Asian it worked for local networks before bricked so i'm not clear with choosing in versions... ["help me with it"]
Click to expand...
Click to collapse
If we are going to flash a stock ROM, we would need to flash the correct version as there is risk of a worse brick if we flash the wrong one. When the phone was working normally, the old network would probably be showing during booting. If you got it from abroad, please check if you can get the information from the previous owner. If there is no way of telling the correct firmware, then you can flash custom recovery to the phone and try flashing a custom ROM via recovery. It's always tidier flashing a custom ROM to a device functioning normally but, unless we can be sure of the correct stock firmware to flash, your options may be limited.
Larry2999 said:
If we are going to flash a stock ROM, we would need to flash the correct version as there is risk of a worse brick if we flash the wrong one. When the phone was working normally, the old network would probably be showing during booting. If you got it from abroad, please check if you can get the information from the previous owner. If there is no way of telling the correct firmware, then you can flash custom recovery to the phone and try flashing a custom ROM via recovery. It's always tidier flashing a custom ROM to a device functioning normally but, unless we can be sure of the correct stock firmware to flash, your options may be limited.
Click to expand...
Click to collapse
and finally i found the correct version and when tried to flash through odin i came across this problem
it stuck at "initialization..." [more than hour..] help pls......
ghjsdf9 said:
and finally i found the correct version and when tried to flash through odin i came across this problem
it stuck at "initialization..." [more than hour..] help pls......
Click to expand...
Click to collapse
Sounds like a partition problem. Please let me know the firmware version you are trying to flash.
Larry2999 said:
Sounds like a partition problem. Please let me know the firmware version you are trying to flash.
Click to expand...
Click to collapse
it's version 4.3(I747MVLUEND2_I747MOYBEND2_SPC) at sammobiles.com............
and once "i tried with pit file by marking re partition" will this effect ??????????????
ghjsdf9 said:
it's version 4.3(I747MVLUEND2_I747MOYBEND2_SPC) at sammobiles.com............
and once "i tried with pit file by marking re partition" will this effect ??????????????
Click to expand...
Click to collapse
I've seen this particular problem reported several times and it's always been a problem with the pit file. Flashing a complete stock system should fix all partition problems though. If the stock file you are using is an Odin flashable file, you may try using Odin 3.09. Otherwise, I'd suggest you find a recovery flashable image and flash via (custom) recovery.
Hello , i have a s920p, the custmer want to unlock it form google the from sprint, i tried to unlock the frp with Octoplus, but its fail V. 6.0., i chat with gsmserver techinal support, they advaice my to downgradit to V.5.0 so idid, at the bigining the phoen does not accept any flash, FRP LOCK, so i choose advance and i flashed the reovery and the pda, now the phone is stuck on samsung,
i cant go into the recovery, every time i try to fla**** with odin, it fail and it shows on the screen (sw rev. check fail, device :3. binary:1 )
since i dont have the serial number i cant flash it with Switch in emergency mode.......
who can i fix this phone ?
thanks in advance
iyasss said:
Hello , i have a s920p, the custmer want to it form google the from sprint, i tried to the frp with Octoplus, but its fail V. 6.0., i chat with gsmserver techinal support, they advaice my to downgradit to V.5.0 so idid, at the bigining the phoen does not accept any flash, FRP LOCK, so i choose advance and i flashed the reovery and the pda, now the is stuck on samsung,
i cant go into the recovery, every time i try to fla**** with odin, it fail and it shows on the screen (sw rev. check fail, device :3. binary:1 )
since i dont have the serial number i cant flash it with Switch in emergency mode.......
who can i fix this ?
thanks in advance
Click to expand...
Click to collapse
you can try flashing a custom recovery on your device for example TWRP, and then download a flashable zip for the smg920p stock firmware. if u fail to get that zip for the stock rom, you can still flash a custom one like Renegade and go from there!
Bill Nice said:
you can try flashing a custom recovery on your device for example TWRP, and then download a flashable zip for the smg920p stock firmware. if u fail to get that zip for the stock rom, you can still flash a custom one like Renegade and go from there!
Click to expand...
Click to collapse
Thanks for your reply,
Would you tell me where can I find the TWRP and with what I can flash it ?
I already downloaded ZIP stock firmware, I don't know with what I can flash it ? I tried with Odin, but it does not take the zip I unzip the file, the extension was CPGZ i cant find any software can flash it in the sm-g920P
I'm sorry about this stupid questions , but I'm new in the word,
Thanks in advance
Saafir said:
http://forum.xda-developers.com/spr...uide-links-files-update-root-restore-t3366862
Click to expand...
Click to collapse
Do not extract any of the files. Using Odin you flash either a TAR or any MD5 file. Please watch the video that is included in my first post.
For anyone interested, the Octoplus Octopus software is an unlocker. See http://www.mobileflashtool.com/octoplus-octopus-box-latest-setup
I personally would not use it, but then I have no need to.
Saafir said:
http://forum.xda-developers.com/spr...uide-links-files-update-root-restore-t3366862
Click to expand...
Click to collapse
I flash it using (G920PVPS3CPD2_G920PSPT3CPD2_SPR) with Odin, the phone work again!!!!
THANK YOU VERY MUCH GUYS
The has 6.0.1 , but its google locked, I tried with Octopus to unlock it, but it does not unlock it....
thanks again, I hope you can guide me how to unlock the google account with 6.0.1 marshmallow.
iyasss said:
I flash it using (G920PVPS3CPD2_G920PSPT3CPD2_SPR) with Odin, the phone work again!!!!
THANK YOU VERY MUCH GUYS
The has 6.0.1 , but its google locked, I tried with Octopus to unlock it, but it does not unlock it....
thanks again, I hope you can guide me how to unlock the google account with 6.0.1 marshmallow.
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=s2xnb6GWucQ
Hi!
i installed the global rom via TWRP recovery
now when i try to set up new device all i get is chinese region
Then i hit next and started looping for some reason and message showing "Find Device Automatically Closed"
After multiple loops it restarts and the TWRP is gone
i tried multiple Roms all the same
if anyone has a clue please help
The solution : use MiFlash not TWRP and careful just flash not flash and lock you might get into a bootloop if you made that mistake just like i did don't panic use Mi Unlock
After it reboots setup your device say goodbye to Chinese bloatware.
Thx @nhtnokia
Flash cust.img or use MiFlash to flash stock ROM.
nhtnokia said:
Flash cust.img or use MiFlash to flash stock ROM.
Click to expand...
Click to collapse
I cant find firmware .img i only found Tgz file type
i have done a backup before flashing i get file types .win001.sha2
faroukxda said:
I cant find firmware .img i only found Tgz file type
i have done a backup before flashing i get file types .win001.sha2
Click to expand...
Click to collapse
I think you should use MiFlash to change from CHINA to the GLOBAL version.
nhtnokia said:
Flash cust.img or use MiFlash to flash stock ROM.
Click to expand...
Click to collapse
nhtnokia said:
I think you should use MiFlash to change from CHINA to the GLOBAL version.
Click to expand...
Click to collapse
i think i screwed up very bad. i flashed and locked with miflash now it goes directly to recovery
saying miui vesion isn't supported
is there any way that i can reflash a locked device to stock firmware " Hard Reset" ?
faroukxda said:
i think i screwed up very bad. i flashed and locked with miflash now it goes directly to recovery
saying miui vesion isn't supported
is there any way that i can reflash a locked device to stock firmware " Hard Reset" ?
Click to expand...
Click to collapse
If your bootloader is still unlocked. I can help you. Let's inbox me.
nhtnokia said:
If your bootloader is still unlocked. I can help you. Let's inbox me.
Click to expand...
Click to collapse
check DM
How to flash fastboot rom in my Mi 11x.
I tried to flash rom using mi flash tool but anti rollback error comes.
Pleased help me how to flash rom using fastboot rom/
saurabh9897 said:
How to flash fastboot rom in my Mi 11x.
I tried to flash rom using mi flash tool but anti rollback error comes.
Pleased help me how to flash rom using fastboot rom/
Click to expand...
Click to collapse
edit the .bat file to remove the ARB commands
keyoke87 said:
edit the .bat file to remove the ARB commands
Click to expand...
Click to collapse
please guide me how to?
my ARB is 1
saurabh9897 said:
please guide me how to?
Click to expand...
Click to collapse
open the .bat file in notepad and remove this portion (depending on whether u use flash_all or flash_all_lock bat file)
also, please note to flash ONLY the original region of the firmware version to prevent bricking your device if you are using flash_all_lock.bat
keyoke87 said:
open the .bat file in notepad and remove this portion (depending on whether u use flash_all or flash_all_lock bat file)
also, please note to flash ONLY the original region of the firmware version to prevent bricking your device if you are using flash_all_lock.bat
Click to expand...
Click to collapse
ok let me try
actually right now i am on xiomi.eu 12.5.4 and my phone is not charging
i also visit to service centre also but they said that its a software issue but it is now out of warrenty as you unlock the bootloader
saurabh9897 said:
actually right now i am on xiomi.eu 12.5.4 and my phone is not charging
i also visit to service centre also but they said that its a software issue but it is now out of warrenty as you unlock the bootloader
Click to expand...
Click to collapse
flash back the original firmware and lock back bootloader
as i have mentioned, let me remind again, please only flash only the original region firmware of your device else if u lock your bootloader then you will have a bricked device. you can only lock your bootloader after flashing the original region of your firmware.
for example: your device comes with global firmware originally, u can only flash global fastboot rom, if u flash india firmware and lock your bootloader, you will brick your device
ok i m trying
keyoke87 said:
flash back the original firmware and lock back bootloader
as i have mentioned, let me remind again, please only flash only the original region firmware of your device else if u lock your bootloader then you will have a bricked device. you can only lock your bootloader after flashing the original region of your firmware.
for example: your device comes with global firmware originally, u can only flash global fastboot rom, if u flash india firmware and lock your bootloader, you will brick your device
Click to expand...
Click to collapse
this is coming
i edit flash_all_lock
i edited this
help me please
Check if your adb drivers are installed at device manager
installed
i just wanted to fix my battery problem
use mi flash tool 2017.4.25 version & u dont even need to remove arb lines.
i visit service centre and they flash using EDL mode.
But i dont wana google dialer and messages in my phone.
Is there any solution to remove this and try alternative apps.
is here anyone who can help me?
saurabh9897 said:
is here anyone who can help me?
Click to expand...
Click to collapse
Hello, what is the region of your smartphone (Global, European, Chinese or Other)?
saurabh9897 said:
is here anyone who can help me?
Click to expand...
Click to collapse
1- Download this version of MiFlashTool : https://xiaomiflashtool.com/download/xiaomi-flash-tool-20210226
2- Download you're version of Mi11x in this website (choose the fastboot) : https://xiaomifirmwareupdater.com/miui/alioth/stable/V12.0.4.0.RKHINXM/
3- Extract the tgz file to get folder with Images and other stuff
4- Launch XiaomiFlashTool and install Drivers
5- Select the folder with you're rom
6- Select CleanAllandLock if u need or select CleanAll
7- Click on flash
8- Wait and ENJOY!!!