Develop Bugs

how to postpone an activity

Hi everybody,
first of all thanks to TOM for his B&B 4.1!!!!
As you can see i'm using that wonderful ROM and i like it so much!!!
There is something that i'd like to customize, but it dosen't depend on the TOM's ROM, but it is related with WM in general.
Any time that an appointment or a task is Notifing me there is the opportunity, through the soft key on the left, to postpone it throug a specific delay. Is there any possibility to customize that delay instead of the percomiled 1 minute, 10 minutes, 15 minutes, etc?
Thank for your answers!!
Cheers

WHY????
Why would you want 2 do that, would you want to snooze it for more then a day? (task rescedule?).
I dont know if its possible, probably you will need a 3rd party app for this. Tries looking into pocketinformant or another agenda/task app?

Just Coz...!
It's a fair question - I've often wished I could snooze a task by a specific amount of time - 40 minutes, 50 minutes, and 1 hour 20 minutes, etc.
As a PocketInformant user, I'm fairly sure it simply interfaces with WM6 standard alerting, bringing up the normal snooze intervals. Certainly if it can be done, I haven't found out how!

iain.fraser said:
It's a fair question - I've often wished I could snooze a task by a specific amount of time - 40 minutes, 50 minutes, and 1 hour 20 minutes, etc.
As a PocketInformant user, I'm fairly sure it simply interfaces with WM6 standard alerting, bringing up the normal snooze intervals. Certainly if it can be done, I haven't found out how!
Click to expand...
Click to collapse
Of course its a fair question, i was just curious...
But do you want to alter the options or make it so that you can choose to put in the specific snooze time?

i'd like just change the "specific time", even better if it's possible to chose how much to postpone .... i think 5, 10 and 15 minutes are quite similar, i need something like:
- 15 minutes
- 3 hours
- 8 hours
- 12 hours
- 1 day
thanks guys!!!

Twiggerdingo said:
Of course its a fair question, i was just curious...
But do you want to alter the options or make it so that you can choose to put in the specific snooze time?
Click to expand...
Click to collapse
For my taste it would be nice to be able to do both, I guess, with a little bit of 'stickiness' so that the last couple of custom snooze times appeared alongside any 'standard' snooze intervals I have configured.
It's handy for those times when you know you are going to be out of a meeting in 25 minutes, or your SatNav is telling you 1 hour and 10 minutes to your destination...not a killer app, but handy!

Exactly!! How could you do that?

Luigi_Follina said:
Exactly!! How could you do that?
Click to expand...
Click to collapse
Ahhhh, that's the million dollar question! All I can say is that I don't believe PocketInformant will do the job.

Re-Request from a Junior Member

Greetings to Developers & Moderators.
I am using Raphael 300( Windows 6.5.x ) and I prefer using the windows Home Screen rather than using Manila.
I humbly ask you all is it possible to make the clock ( small round analogue ) alive and work equally along with the digital one on the home screen.. I have attached a picture along with this post to make the concept clear..
Thanks and Regards to every Moderators and Developers

Hi bonnyinqingdao
The little analog clock is only an image, search for "Titanium skins" to find something close, not what you want exactly. Good luck!

Feasibly, I could make a program that every minute it updates and creates a new clock image based on the Time, however I am not sure how the homescreen works exactly (in terms of refreshing). Refreshing the homescreen every minute would be both a pain and inconvenient.
If someone knows how to update the image every minute without inconvenience, I would be happy to make the image-maker

Cyclonezephyrxz7
60 images X 12 = 720 it's a lot of work !!! Refreshing Titanium takes 3 to 6 seconds, every minutes it 'll happen, the whole device will be devoted to doing only this thing

tito12 said:
Cyclonezephyrxz7
60 images X 12 = 720 it's a lot of work !!! Refreshing Titanium takes 3 to 6 seconds, every minutes it 'll happen, the whole device will be devoted to doing only this thing
Click to expand...
Click to collapse
I wouldn't save the images to the phone. Not all of them atleast.
The program would have a base-image to work with, and it will load it, then draw a Line on it with Graphics.DrawLine() for the minutes and one for the Hour. I already know the formula for degrees between hands for every minute (it was an Extra Credit Final Project in my Geometry class two years ago )
However, if Titanium doesn't update that often, then it isn't all too worth it...It would cost more resources than it is worth That, or someone can just make a new CCLock Panel (I don't know C++ well enough, so I can't do that)...

Right, I didn't think about changing the arms only
There's already an analog clock plugin somewhere....

Script on zooper

Can i write my simple script?
for example, do the simple math. But one expression it is impossible to do. For example, like the current time 2 hours 45 minutes, add 20 minutes and the result for 3 hours and 5 minutes. How can I do ??

Help... total newbie question...

All I need to know is in Zooper... can I display an image instead of the text displaying the day of the week... so for example... if I want to display a draw of a camel on Wednesday instead of the text 'Wednesday' or 'Wed' etc. can I do do this? I am sure it is possible... I just cannot figure out HOW Thanks for any help!

As you can tell from the below sample you can see that you should me able to write an expression that would allow you to not only change the date and time but to do exactly what you want. If you need any help please pm me and I'll help you out any way I can.
Cheers!
If I've been of help please hit the thanks button.
I$#BLEVN#>10?Good!:Look for a charger!$ will render “Good!” if battery level is greater than 10 or “Look for a charger!” otherwise
Rich Text [c=$#BLEVN# 10 && #BLEVN < 25 ? #FFFF00$$#BLEVN# >= 25 ? #00FF00$]#BLEVN#%[/c] will write battery level (es 10%) in RED if battery is 1) ? #C0EEEE$ will write first calendar entry day name writing “Today” if its today, “Tomorrow” if tomorrow, the name of the day otherwise
$#C0SHH:mm#!=00:00$ will render the starting HH:mm of first calendar event only if it is different than “00:00″
Is it August $#DM#=8?Yes:No$ will render “Is it August: Yes” during August, “Is it August: No” otherwise
$#LCN#!=Germany$ will render the Country name only if its not Germany (nothing otherwise)
$#C0D#=1?#C0Shh\:mm#$ will show the time of first calendar event start in 12 h format only if the entry is not an all day event (please remember to*escape*the “:” into “\:” otherwise it will be considered an “else” block!)

KiRyah said:
As you can tell from the below sample you can see that you should me able to write an expression that would allow you to not only change the date and time but to do exactly what you want. If you need any help please pm me and I'll help you out any way I can.
Cheers!
If I've been of help please hit the thanks button.
I$#BLEVN#>10?Good!:Look for a charger!$ will render “Good!” if battery level is greater than 10 or “Look for a charger!” otherwise
Rich Text [c=$#BLEVN# 10 && #BLEVN < 25 ? #FFFF00$$#BLEVN# >= 25 ? #00FF00$]#BLEVN#%[/c] will write battery level (es 10%) in RED if battery is 1) ? #C0EEEE$ will write first calendar entry day name writing “Today” if its today, “Tomorrow” if tomorrow, the name of the day otherwise
$#C0SHH:mm#!=00:00$ will render the starting HH:mm of first calendar event only if it is different than “00:00″
Is it August $#DM#=8?Yes:No$ will render “Is it August: Yes” during August, “Is it August: No” otherwise
$#LCN#!=Germany$ will render the Country name only if its not Germany (nothing otherwise)
$#C0D#=1?#C0Shh\:mm#$ will show the time of first calendar event start in 12 h format only if the entry is not an all day event (please remember to*escape*the “:” into “\:” otherwise it will be considered an “else” block!)
Click to expand...
Click to collapse
Hi! I saw this post of yours, I know it is late but I am trying to edit my calendar widget so that it displays the event in this format: *Month* *Day* *Day of the Week* *Time (if not an all day event)* *Event Title*
For example my first upcoming event is: Suits Season 5 Return @ January 27 at 6PM.
So the only way I could tweak it as closely to my preference displays as "Wed Jan 27 6:00PM Suits Season 5 Return". This is REALLY close to how I am trying to get it but the rich text is a bit complicated for me.
As of right now my current rich text is: #C0SEEE MMM d hh:mma# #C0TITLE#
I am trying to have it say, "Jan 27 - Wed - 6:00PM Suits Season 5 Return" AS well as for the time to disappear if it were an all day event instead. Do you think you can help me out with this? I tried to copy and paste in some of your code it wasn't really working for me.

Need help with hand rotation formulas in Watchmaker

Still being a bit of a n00b, I am having some problems figuring out the formulas for the hands on a watchface I'm making in Watchmaker. Can anyone lend a hand (sorry, no pun intended)?
What i'm trying to do is create a face with an hour hand that starts at 180 degrees (for noon/midnight) to 270 (11pm); and a minute hand that rotates counterclockwise from 180 degrees to 90 degrees. Does that make sense?
Here is the link to a pic: http: //postimg.org[/url] /image/ fz584yeoh/

Sorry, that link was incorrect. (delete the spaces)
Try this: http: //postimg.org/ image/ fz584yeoh/

Not sure if you've already figured it out, but I just learned how to do this yesterday (so forgive me if it's wrong).
For your hours try: (90/12)*{dh}-180
Your minutes should be: -((90/60)*{dm}-180)

Thanks so much!!
Now, i have another question. I know that "{drh0}" is the rotation for the hour hand without rotation for minutes (i.e., a "jump" movement). How can I do that for the minutes as well? I am working on a watchface with three separate dials: one for the hour, one for the 10's of minutes (a dial from 0-5), and one for the single minutes (a dial from 0-9). But I can't figure out how to get the smaller minute dial hands to "jump" instead of rotate. Does that make any sense?

I think what you're looking for is:
360/6*{dmt} for your minutes (tens)
360/10*{dmo} for you minutes (ones place)
This is assuming you have 0 at the 12 o'clock position for your dials. (Technically you can even simplify the 360/6 and the 360/10 but I leave it as is for personal taste)

That got it! Thank you so much!