Hello all, here is my story. I had a Verizon Galaxy Nexus with broken screen, recently I remove the screen totally and now I have it without screen. I tried to use a mhl cable to connect it to my monitor, but it did not boot since Android can't detect the touch screen and it won't boot.
After a long time of search I find a post from marpoz.blogspot.com/2013/05/boot-android-without-touchscreen.html , it says I can change a module parameter during the boot to make it work, but my situation is a little different since I didn't have my USB Debugging enabled, so I can't do that trick.
Dose anyone have any idea of how to do to make my Galaxy Nexus alive? Thanks.
Related
Howdy Folks,
I'm looking for some help, because my Galaxy Nexus is kinda frustrating me right now.
For some reason my Galaxy Nexus does not charge anymore, unless I shut my Phone down en while it's rebooting plugging it in.
This part is the same when charging it by the 3 dot connect on the side, or the USB port.
I have not been able to find a fix for this problem, so I would like to uninstall superuser. And Lock my phone again so I can send it back to get it fixed.
But I can't figure out how, Cause my laptop or any other computer i've tried it on. Does not recognize my device..
Could Someone help me restock my phone, without the use of USB.
Galaxy Nexus
Android 4.1.1
JRO03C GSM
Started with the same problem yesterday. Y did notice that if I shut Orr the phone, while in the process, right before shutting off, battery icon jumps to charging.
So I uninstalled some apps I recently downloaded and now it charges.
So. It maybe some app affecting some service. Also use a small brush to clean the connectors in the adapter and phone
Sent from my Galaxy Nexus using xda app-developers app
Thanks but I'm sure its not a faulty connector. Cause my 3 dot docking station gives the same results. I have had this problem for a month now. Didn't download any apps at the time. I've also did a factory reset. No results. And a reset in recovery mode. But the strange thing about it is. Even thou it wiped all my apps except superuser. It did not remove my music and photos.
Sent from my Galaxy Nexus using xda app-developers app
I have GSM version of the Galaxy Nexus and the internal digitizer screen went bad after it cracked. My phone turns on fine, but the touchscreen is rendered useless. Screen doesn't turn on, but I am able to boot into the internal sd card portion of the phone via usb on mac and pc. Instead of me paying to buy a new screen I just want to sell this on ebay as is and recover my losses for the upcoming nexus 4. The problem is I don't want my personal info on it and unfortunately I was unable to setup the usb debugging mode prior to the screen cracking so screencast app won't work for me, I tried. Any ideas on how I can wipe my phone clean? Can this be done via odin? and if so how? Thanks for the heads up.
xmatic said:
I have GSM version of the Galaxy Nexus and the internal digitizer screen went bad after it cracked. My phone turns on fine, but the touchscreen is rendered useless. Screen doesn't turn on, but I am able to boot into the internal sd card portion of the phone via usb on mac and pc. Instead of me paying to buy a new screen I just want to sell this on ebay as is and recover my losses for the upcoming nexus 4. The problem is I don't want my personal info on it and unfortunately I was unable to setup the usb debugging mode prior to the screen cracking so screencast app won't work for me, I tried. Any ideas on how I can wipe my phone clean? Can this be done via odin? and if so how? Thanks for the heads up.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1626895
Thanks! It worked like a charm!!!! awesome!
I have a big problem, i dont know how but i managed to break my galaxy nexus and at first i just saw the screen shattered a little bit; i tried to power on and connect to a charger. and even pull the battery out and plug in again. all the screen shows is a weird beams and i cannot turn my phone on and see what is going on .
please help me !
THANK YOU
orpeleg3 said:
I have a big problem, i dont know how but i managed to break my galaxy nexus and at first i just saw the screen shattered a little bit; i tried to power on and connect to a charger. and even pull the battery out and plug in again. all the screen shows is a weird beams and i cannot turn my phone on and see what is going on .
please help me !
THANK YOU
Click to expand...
Click to collapse
not enough informations..
pc can detects adb & fastboot? got any custom recovery installed?
- did u change your bootloader versions?? just back to stock
- change your kernel/boot.img
Hi all my friend bought a second hand nexus 7 when it come the screen was flickering and sometimes the back lighting would come on only? I'm able to get into fast boot mode and my computer sees the device as a (Google nexus 7 boot loader interface) and all tool kits work with it I.e (they can list the device) but non of them can unlock the boot loader when I go to turn it on all it shows is Google logo no pad lock or anything now I'm new to this forum and they say low posts get taken down but I would be amazed if someone knew how to get through this problem
Your help would be most greatful
Sounds to me like it's faulty.
Vinzyy said:
Hi all my friend bought a second hand nexus 7 when it come the screen was flickering and sometimes the back lighting would come on only? I'm able to get into fast boot mode and my computer sees the device as a (Google nexus 7 boot loader interface) and all tool kits work with it I.e (they can list the device) but non of them can unlock the boot loader when I go to turn it on all it shows is Google logo no pad lock or anything now I'm new to this forum and they say low posts get taken down but I would be amazed if someone knew how to get through this problem
Your help would be most greatful
Click to expand...
Click to collapse
If, without going to bootloader, it's stuck in Google logo, then EMMC is dead/corrupted. This can only be fixed by replacing the motherboard - very simple task even with no special tools. But considering the tablet's screen is faulty too (flickering), I wouldn't bother - this is the end. All you can salvage from the device is a USB charging port that you can sell on ebay for around $40.
Hello guys, this is my first post on this forum so i hope i don't post where i shouldnt.
So i was trying to integrate an android tablet onto my car so i can see everything that happens to my car real time with an OBD2 bluetooth diagnostic.The problem is im trying to integrate it so no buttons of the tablet are accesible. I got my hands on a cheap Vodafone Smart Tab 3G and i was searching ways to turn it on once it gets power. I managed (with the help of my dad, THANKS DAD !!!) to make a fake battery (a charger that connects back to the tablet and simulates a real battery). Now, all i have to do is make the tablet turn on once it gets power. On samsung devices if u hold down the power button it starts normally but on this device it just freezes at Powered by Android logo, so i dug up a little bit more and i managed to root it. I tryied then the ipod file modification. I tryied even to delete it and replace with the reboot file, still nothing. The charging animation dosnt show but it wont boot up either. Then i found out about bootloader oem on-charge 0 (or something like that, i cant remember, being searching for like 2 or 3 days) but the tablet dont support that either. Now im stuck with this. Tryied to find some custom roms to flash on my device but found nothing in particular.
So, any ideea how could i achieve this ?