Any one know if it is possible to force a 3G connection, my house is located right between where 2 towers overlap, as I pull up to my house in the car, I have a 3G connection, but a soon as I walk into the house I can see the 1 tower drop off and the other pick up, problem is the stronger tower is only an EDGE connection. I bought an 8db gain antenna, but that just made the EDGE connection stronger.
Shy of moving my house 1 block over, does anyone have any ideas.......?
did you try forcing it to wcdma only ? were you able to keep the signal?
did it, works great, thanks
i have a pretty poor signal (3g and 4g) inside my apartment. 4g doesn't come in at all really, and 3g is about 3 bars at most, sometimes it briefly goes to 4 bars. i live on the ground floor of an old brick building, but i'm willing to try any tricks to get a 4g signal indoors (making a ledge for the phone up by the ceiling? by a window?). if i stand in front of my window on the sidewalk i get a fine 4g signal, but i don't want to set my phone on the sidewalk outside to wireless tether
has anyone experimented with any techniques to get a good signal? i heard 4g has a more difficult time penetrating through walls and insulated glass (i just have old windows with 1 single thin pane of glass). is there any way to position the phone to best get a signal (avoiding contact with certain parts of the phone? where is the 4g antenna specifically within the phone, at the top?)? can i somehow make an antenna somehow and place it outside my window and connect it to my phone in some way? are there sprint indoor antenna booster devices of some kind?
forgive me in advance if this has been covered... yes i did try searching but unfortunately when the device itself has "4g" in the name im getting a lot of invalid results
thanks!
I happen to live in an area where I seldom get a signal stronger than 60% outside my home. Within my home, I run between 10% and 30% signal. Due to this I tend to get a lot of dropped calls. I have reported this "valley" in my city as being in a weak signal area for AT&T. Most of it began with 3G. I have now resolved that I should purchase a signal amplifier with an omni antenna that can be installed in my attic that would have about a 35-40 foot cable running to the inside unit. As I understand it, that should closely resemble an outside signal.
Anyone have any suggestions on home cell phone amplifiers that will handle multiple calls simultaneously? It obviously is not totally an AT&T issue because I have several friends on differing networks that have the same problem in my house.
Any help would be appreciated.
I am not one who has run into the LOS just yet, and here's to hoping I don't.
However... I do have terrible signal pretty much inside anywhere. Outside or in the car I have had pretty decent signal everywhere I have gone. However whenever I am inside pretty much anywhere I get 0-1 bar at best, and often even roaming does not function.
Is anyone else experiencing anything like this?
Is there any development for fixes for improved signal/antenna? Is this even possible?
Thanks a lot for everyones time.
That sounds pretty bad. I did notice that the Epic 4G Touch's signal strength is often 1-2 bars lower than the Evo and Evo 3D. This does include inside locations, so I've resorted to using Google Voice for texting and Groove IP for phone calls when I have Wi-fi.
Maybe take the phone to a store that has the same phone in stock and compare signal strength?
I just got this phone a few days ago switched from Verizon and this thing is always roaming im outside at a dog park and its roaming this cant be sprints service im guessing horrible signal strength.
Sent from my SPH-D710 using XDA App
thedeadletters said:
That sounds pretty bad. I did notice that the Epic 4G Touch's signal strength is often 1-2 bars lower than the Evo and Evo 3D. This does include inside locations, so I've resorted to using Google Voice for texting and Groove IP for phone calls when I have Wi-fi.
Maybe take the phone to a store that has the same phone in stock and compare signal strength?
Click to expand...
Click to collapse
Bars are not a comparison of signal strength between phones you have to look at dbs
Sent from my Samsung Galaxy S2
I just got the phone a couple days ago and I was having the same issues inside my house. I could not even get the xda app to load. I took out the default proxies and it has helped, at least it feels like that to me.
Sent from my SPH-D710 using XDA App
This is a well known issue that's been talked about since its release. Hopefully it will be on the list of things they try and fix in they first OTA update along with LOS and Android OS
Not saying this applies to everyone, but I figured out why the particular E4GT I was testing had such jumpy signal levels. I was doing side-by-side comparisons with an Optimus S using menu->settings->about phone->status.
It appears the E4GT has very little granularity with signal strength reporting. It only goes by increments of 5 dBm, whereas the Optimus reports signal levels at a granularity of 1 dBm.
For E4GT, -106 dBm = 0 bar, -101 dBm = 1 bar, -96 dBm = 2 bar, -91 dBm = 3 bar - 86 dBm = 4 bar, -81 dBm = 5 bar, and -76 dBm = 6 bar.
Problem in my main test area is the signal is somewhere between -93 dBm and -98 dBm according to the Optimus S. Whereas the Optimus S can react to small changes in dBm with equally small changes in reported signal strength and "# bars", the E4GT tends to like jumping from -91 dBm to - 101 dBm and back. It only reports certain discrete levels and it appears to be rounding up and down (based on side-by-side signal comparison to Optimus S) They both go up and down at roughly the same time, but Optimus S does it smoothly over time. E4GT just does the signal change reporting very abruptly with 5-10 dBm jumps.
Second thing I noticed is hand and phone positioning really affect the signal strength. The antennae/transmitter appear to be at the bottom hump on the phone. If I place my hands over that area holding the phone normally I can go from 3 bars (-86 dBm) down to 0 bars (-106 dBm). Data starts getting very iffy at -106 dBm but still kind of works, just real slow. If I hold the phone in the middle or near the top, I almost always get the same or better signal. I also found the phone gets the best signal when it is held flat, rather than perpendicular to the ground. In fact the best signal I get is when I'm not holding the phone at all, and instead lay it flat on the table.
Again, I'm not saying every phone behaves this way nor am I saying this explains everyones' signal issues. I'm just relaying my experiences.
BTW the signal levels when laid flat on a table side-by-side to the Optimus S is very comparable, almost the same (minus the lack of granularity). However when I'm holding both phones, the E4GT has generally 5 dBm worse signal, sometimes 10 dBm if I'm holding normally and covering the bottom of the phone.
That is very interesting sfhub.
I really hope the OTA has some bearing on these issues. I really wish it would come out sooner than later. I have another week or so to decide to keep this phone or not and really don't know regardless of if an OTA is released whether i will keep it or not.
There is a lot to like and a lot to drive you crazy about this phone.
I have thought that the signal has always been weak on my phone but seems to have got worse over time. Is there anything that can boost the signal?