Yesterday my brother was watching a video on Angry Birds toons and the tablet froze. I couldn't exit the app or switch it off normally. I decided to hold the power button for about 10 seconds until it turned off. After this I wanted to switch it on again, but there was no response. I plugged in the charger and the screen stayed black. I have tried all sorts of combinations and tricks but none seem to be working. I plugged it into the charger overnight and tried again but again, nothing worked. I was thinking to send it to samsung as I only got it 5 months ago. The problem is that the tablet was rooted so I think the warranty is void. What can I do, it's not even recognised by a computer when plugged in.
Send it to Samsung with root.. I did this with my old Ace Plus and they repaired it
I have the same problem on gt-p5210, i have only open it, unplug and replug battery... and it work
What abigail34 says works. If you are comfortable opening your tablet. This seems to be an issue with the gt-p5210.
Related
So i've looked around and no one that i've seen has the same exact problem as i do. Here's my post in another forums about my problem.
Here's my story about my Galaxy s2 for T-mobile. My phone randomly turned off 2 days and whenever i tried to turn it on, it would restart and basically never get pass the blue loading bar screen. Second, i found out about this boot loop sequence and i was able to do a factory wipe.
After i factory wiped the data etc off the phone, i was able to use it until it ran out of battery, but then after i found out it ran out of battery, it wouldn't let me turn it back on, it wouldn't get pass the loading screen, once again. On the other hand, i am able to go to recovery mode or download mode, but the phone shuts off before i can even try and click on the options i want.
Today, i found out that if i kept pressing power button consecutively on the phone, I'd be able to go to my home screen and basically act as if nothing ever happened, it'd function as a new phone! I then had the nerves of turning off my phone just to make sure it finally works now, but my hopes were crushed and now the pressing the power trick does not even work anymore. It would probably work one out of 10-15 times, and in the end it'd still restart. I am using a gingerbread galaxy s2. My friend tried using the usb jib on my phone, and it worked but whenever he tried to plug in the usb, the phone would just restart. I am extremely frustrated with this, and if you can help, please do so because it's important that i fix this phone. If you have any questions, please feel free to ask!
Hi there, thank you for the welcoming me to the forums. No, my phone is not rooted, it has always been gingerbread etc i never tried rooting because i never knew how:/ I believe this started when i was just browsing around facebook, so i'm not entirely sure what happened... Uhmm i tried going to download mode through the volume keys and power button when it's connected to usb to the i think it's odin3? and it'd be in the download mode but as soon as the computer says it's connected, the phone would just turn off again and bam, it's like nothing ever happened. My phone does charge when it's plugged in, but it doesn't show it's being charged but i remember my battery was dead last night and i charged it till today and now it's got power. ANd no i don't have a warranty:/ i really hope you can help me
Sounds like a faulty power button. Check out Mobiletech video for thier power button repair service.
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-t-mobile-power-button-repair/
Sent from my SGH-T989 using xda premium
Hey Guys,
So i've done some research all evening here and I've done nothing different than i'd do any other day with the phone and all of a sudden today around 6 PM eastern the phone started acting up. I came home from work plugged it in and it started to lag and then froze, finally unfroze and got that error " Unfortunately, %1$S %2$S has stopped running. I only have the option to click (ok) So I would do that and I thought all was well, turns out this is not the case. When this error pops up it also disables the phone from charging. I unplug and plug back in, the phone starts to freeze and the error comes back. I've been doing some online re-search some people say it's a synch issue with google and to turn synch of, did so, still same error. Some people have said unplug charger, power off phone wait 10 seconds, plug charger back on and boot up, this also did not resolve my issue. I will say that if the power cable is not in the device, it works fine. After about 2 hours of trying different things, I plugged it back into the charger and the phone started acting out really strange, changing from screen to screen and indicating " The dock is connected" I don't own a dock and the phone has never been into dock. I'm using the stock charger that came with the Note 2.
I will say I have TWRP installed and I've been using the JEDI X Rom for this phone without any problems. I thought, okay well none of this is working maybe it's the rom acting up, so I decided to go into recovery wipe all cache & system and re-installed the rom, same thing. The dock is connected, phone freezing and Unfortunately, %1$S %2$S has stopped running. So, I re-did everything again, wiped all cache systems, fixed permission and put the stock rom back on the phone. Now the phone is indicating in stock mode that the "dock is connected" when really it's just the charger. The phone is going into the time out then pops back on automatically all by it's self. Not getting the Unfortunately, %1$S %2$S has stopped running anymore though. the phone is 3 weeks old, and i'm at a loss here as to what I should do next.
Any suggestions, if not, Is there away to erase the phone "call" time so I can get it down to below 30 minutes so I can return this one for a new one?
Thanks,
Well, after hours of reading, I came across this post for an Android EVO phone and it mentioned something about a connect point of the charging port in the phone and said slightly bend the charger cable when it's attached inside, I tried this at a last cause and everything fixed itself, I re-flashed Jedi X and all errors have cleared itself. I find it strange because I'm very gentle with inserting/disconnecting these cables...
Thanks,
I'm not surprised. I've had similar issues with a S2 and other Sammy phones. In fact my brothers Galaxy S as well. He had to get the whole board replaced. I hate MicroUsb. Although its nice to have a generic sync port that is the same across almost all Android devices, this port needs to change.
Just my $0.02. Glad to see you figured it out. Knock on wood my Note2 hasent had these issues yet.
Sent from my SGH-I317 using xda app-developers app
Hey Good afternoon.
I own a samsung galaxy tablet 3, 10.1 inches version.
it is not rooted but i sideloaded games on it.
while playing a game my device first froze then shut off, leaving a blank screen.
I am frustrated because every method i have used didnt work.
i tried the power button options along with the volume up and down, i left it charging overnight for 6 hours and tried again. and still nothing.
Also, i tired connecting to my computer by usb and it nothing showed up. it is also not showing in keis.
I am really frustrated, Can someone help me please?
Hello everybody. The story goes like this
Last night I put my P6-U06 to charge overnight, After half an hour I realized it didn't charge at all. Not even 1% although the device stated "Charging(x%)" on the homescreen. After fiddling with it a bit changed chargers, changed cables etc. the phone died. Putting it back in the wall socket started charging my phone. After a 15% charge I thought I boot it up. Then the display went completely black and started vibrating continuously. As such I believed it to be a software issue and proceeded to download firmware from the huawei website and placed it in dload folder in sd card.
Problem is I have absolutely no idea if the phone is off or not because as soon as I plug it in a computer or wall socket it starts vibrating and the little LED starts beeping red. However when I try the 3 button hold for recovery the continuous vibration stops for a second and then it kinda pulsates( like when you are typing ) then starts vibrating continuously again. I have tried every possible combination of these three keys all with the same result. For some reason I cannot start the huawei recovery procedure. Also the pc is not detecting the phone at any stage.
What do you think is causing this? I can't explain what happened. A minute was working fine the other bam! bricked phone.
Update: plugging the phone in the pc or wall socket while holding the 3 buttons starts it with the pulsating vibration mentioned above. However nothing on the display and a few seconds after releasing the buttons the continuous vibration resumes.
Update 2: This morning the phone was left without charge. When connecting it to the charger the display came alive with the battery and percentage of charge. However booting it again resulted in the same issue.
Hi. I've got a SMT700 that I purchased new and have used for several years with only minor troubles(Having to reconnect the battery occaisonally) and recently I had a new issue come up I've no idea how to fix. My knowledge on this stuff has extremely large holes in it, so I may have missed something obvious. I've been poking around all week trying to figure it out to no avail.
Anyway, the issue: My daughter was using the tablet and it became unresponsive. I popped the back off and fixed the battery cable(It had come out) and after doing so it flat out refused to turn on. Wouldn't boot in recovery or anything else I could think of. So I plugged it in overnight and let it charge just to make sure, since I wasn't sure if it had had much of one when it turned off. Will not turn on. If you push the power button while it's plugged in, the status of the charge(Says 100%) will blank out and then it resets like I just plugged it in. I've found that if I try to boot it in Recovery, it will come up just fine - if I unplug it, it turns off instantly. If I reset it, it turns off and goes back to the charge status screen as if I just plugged it in. It just has the Samsung firmware installed, I believe fully updated(I rarely check it since the tablet is old and it's literally just used for Disney+ for the kid lately) I'm at loss for what could it causing it or what I can do to fix it. Anyone seen this and able to point me in the right direction? Thanks for your time.
Oh. And I have tried plugging it into the computer, but it doesn't even register as plugged in(Can't do recovery or anything) - that didn't really surprise me, it wouldn't charge that way before so I didn't think it would work.