Fastboot commands not working while trying to factory reset .
What to do?
Did you install the minimal fastboot drivers on pc?
Related
Pls help me to find this omap 4470 kindlefire hd driver.thnx
Do you wanna to unbrick your KFJW?
KFJW--Kindle Fire 8.9" HD
yes.my Kf 8.9 not detected by pc in normal mode,i tryied to conect it by boot mode,then it ask the OMAP driver,so pls help me to revive this plez
jayanandana said:
yes.my Kf 8.9 not detected by pc in normal mode,i tryied to conect it by boot mode,then it ask the OMAP driver,so pls help me to revive this plez
Click to expand...
Click to collapse
Same thing here. Any ideas on how to recover?
do you recovery your kindle fire?
sorry, i'm not here long time....
I think you don't need to install OMAP driver. I have been fixed my bricked device (KF HD 8.9) today.
How it became bricked.
I rooted it yesterday, than installed all Google apps and got strange issue in gapps framework. I started to delete some google apps and .odex files and my device stopped to boot correctly. It boots into recovery and recommend to reset to the factory mode. However this trick is not successful. So I have had boot logo looping.
How I fixed it.
I tried a lot of drivers and tricks to boot my KF into recovery. I even ordered the factory cable today on eBay, but I didn't want to wait about two weeks when it will be arrived to me. So I found working driver in Android SDK and Amazon Extension, like it described here: https://developer.amazon.com/sdk/fire/connect-adb.html . Than I used Kindle FIre Utility to run fastboot and adb tools. Also I downloaded KFHD System.img Recovery Tool to download the latest system.img and flash it in fastboot mode.
1. Download ADB (and Fastboot) drivers from http://forum.xda-developers.com/showthread.php?t=1890413 and install it (I used KindleDrivers.exe setup file)
2. Start downloading the KFHD System.img Recovery Tool from here: http://forum.xda-developers.com/showthread.php?t=2011126
3. Download Kindle FIre Utility from here: http://forum.xda-developers.com/showthread.php?t=1399889
4. Extract Kindle FIre Utility and run cmd.exe with with working folder Kindle Fire Utility\tools
5. Run this command:
fastboot -i 0x1949 reboot-bootloader (it will be wait while your device will be turned on in to fastboot)
6. Power off your device (hold power button more than 10s)
6. Connect your it to the PC
7. Power on it. And install drivers manually, choosing .inf file from the destination path where KindleSetup.exe was installed before. If you done steps above without mistakes, then fastboot.exe found your device during powering on for 0.5s approximately and switch it into bootloader mode (it means permanent fastboot in our case).
8. Now in fastboot mode it is possible to refllash some .img files. So extract downloaded earlier KFHD System.img Recovery Tool and flash system.img using this command:
fastboot -i 0x1949 flash system <system.img> .
9. When flashing will be finished you should erase userdata and cache using this commands:
fastboot -i 0x1949 erase cache
fastboot -i 0x1949 erase userdata
10. And then boot the device again in normal mode using this command:
fastboot -i 0x1949 reboot
Now can load KFHD 8.9 without errors and than using adb tool to do other tricks.
Trying to follow the steps to boot into TWRP using this method:
http://forum.xda-developers.com/smartwatch-3/development/lwx49k-rooting-easy-t3107501
I am able to boot into fastboot and my screen shows "Running Fastboot" but when I issue the command fastboot boot "<filename>" I just get < waiting for device > on my PC.
Any idea what is getting stuck? I factory reset the watch hoping that would solve the issue but no luck. ADB works fine.
You need to load the drivers for fastboot. What os do you have?
Hello, I have problem with fastboot mode ealier it was working well but in Minimal Adb and flashboot i seen <waiting for device> so I started checking drivers and after this fastboot mode stopped working. I tried to run fastboot by command adb reboot fastboot but it just reboots phone I need help very fast. [I need fastboot mode to flash CWM on my phone then root it and install cyanogen mod 13 (android 6)]
Tried fixing my oppo find 7
Did all those Fastboot wipe .
Fastboot flash recovery and flash LOGO and stuffs
but im still stuck on logo ... WHUT
kevzwenhao said:
Tried fixing my oppo find 7
Did all those Fastboot wipe .
Fastboot flash recovery and flash LOGO and stuffs
but im still stuck on logo ... WHUT
Click to expand...
Click to collapse
Did you unlock bootloader?
1. Connect the device to the computer through USB.
2. From a terminal on a computer, type the following to boot the device into fastboot mode (or restart pressing power+vol up):
Code:
adb reboot bootloader
3. Once the device is in fastboot mode, verify your PC sees the device by typing:
Code:
fastboot devices
4. From the same terminal, type the following command to unlock the bootloader:
Code:
fastboot oem unlock
If the device doesn't automatically reboot, reboot it from the menu. It should now be unlocked.
5. Then you can flash the recovery what you want. In fastboot mode, type in terminal:
Code:
fastboot devices
6. And flash the recovery. Type:
Code:
fastboot flash recovery your_recovery_image.img
Good luck
roi_xordo said:
Did you unlock bootloader?
1. Connect the device to the computer through USB.
2. From a terminal on a computer, type the following to boot the device into fastboot mode (or restart pressing power+vol up):
Code:
adb reboot bootloader
3. Once the device is in fastboot mode, verify your PC sees the device by typing:
Code:
fastboot devices
4. From the same terminal, type the following command to unlock the bootloader:
Code:
fastboot oem unlock
If the device doesn't automatically reboot, reboot it from the menu. It should now be unlocked.
5. Then you can flash the recovery what you want. In fastboot mode, type in terminal:
Code:
fastboot devices
6. And flash the recovery. Type:
Code:
fastboot flash recovery your_recovery_image.img
Good luck
Click to expand...
Click to collapse
Hi, is it wrong to wipe the system partition before flashing a custom rom? Coming from stock ColorOS, I've wiped all dalvik cache, cache, system, and data, then flash a custom rom but it ended up getting endless bootanimation unable to boot into the custom rom.
I did unlock the bootloader with the adb code, flashing a temporary recovery was a success but endless bootanimation happened after flashing a custom rom. The custom rom was successfully installed according to TWRP's log.
Pls advice, thanks in advanced
P.s: I was referring to my friend's device X9076
Hi, i tried in the past some roms than not works, phone stuck in boot animation. The roms wich works for me and my x9076 with r63419 are:
Omnirom (6 or 5) THE BEST
Project Spectrum
Cyanogen 13 (modified version for new panel: http://community.oppo.com/en/forum.php?mod=viewthread&tid=44907&extra=)
Miui
If you install CM13, you need to flash unified partition script for CM13 (you can find it in the same post from the forum Oppo Community)
For the other roms i dont need to flash anything else than rom and gapps.
Now i give a chance to CM13, but i think that i will get back to Omni if developers dont fix the mobile radio issue.
Cheers
Can anyone guide me please, 1st time i bought MTK phone Oppo F7, its update automatically but suddenly dead like stuck on logo and restarting again and again, i didnt ever flash MTK phone, neither i have any android tool like MRT dongle or any other flash USB or Box... Kindly guide me step by step how to flash with which tool only USB cable and PC... Thanks in advance
Hi, I want to move to a custom ROM on my A2 Lite. But before anything else, I need to backup my phone.
1st step : TWRP recovery.
On the PC, ADB driver is installed. Phone powered and connected, I have no problem to send ADB command to phone. "adb reboot bootloader" for example.
But once the phone is in fastboot (logo on screen), it is not recognized by PC (no driver) and I can"t send Fastboot command.
Any hint ?
Thanks.
Ok, I found a solution.
Downloading Google USB Driver but installation procedure is wrong, I should FORCE it and manually assigne the driver "Android Device / Bootloader" to be able to connect in Fastboot mode.
fastboot oem unlock
-> Reboot with the warning message but wipe all data. It's the only I found to unlock the bootloader :/
fastboot oem edl
-> Not the solution to flash the new ROM
fastboot boot twrp*.img
-> Way better to get the recovery flashed