Related
Has anyone found any play-through form fit cases for the A100?
Right now I've got a Belkin neoprene sleave that protects it in my bag, but there have been a few times where I've been knocked into and had the tablet go flying, or simply dropped it (thats one slippery device!!). So a play-through form fit case would be perfect.
I contacted a few accessory stores here in Canada but with no luck. Figured someone else out there would have seen SOMETHING.
Thanks
I use the actual Acer case. It's not bad.
Sent from my A100 using XDA Premium App
try this ，nice sleeve
http://www.ebay.com/itm/150672895049?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
A100 Cases
us-store.acer.com
ACER finally has their Accessory store up and showing all the goodies. I bought the CARBON FIBER case which is $40 US. I also have the Black case $30 US but the Carbon fiber is much better quality. Looks like they also have some Silcone cases (bumper cases) they call them.
xjumbotx said:
us-store.acer.com
ACER finally has their Accessory store up and showing all the goodies. I bought the CARBON FIBER case which is $40 US. I also have the Black case $30 US but the Carbon fiber is much better quality. Looks like they also have some Silcone cases (bumper cases) they call them.
Click to expand...
Click to collapse
Nice! The carbon fiber case is exactly what I was hoping to find...as are the bumper cases actually. I find the A100 to be really really slippery, and there have been a lot of times where I'm using it in bed while going to sleep and nodded off...of course dropping the A100 in the process
Luckily it's a tough little beast and survived the short falls from my bed.
Now, the question is...trying to find this stuff in Canada!
The Source
rcummings100 said:
Has anyone found any play-through form fit cases for the A100?
Click to expand...
Click to collapse
I'm not sure what you mean by "play-through", but if you mean a case that lets you use the tablet without removing it from the case, then this one from The Source :
http://www.thesource.ca/estore/prod...e&category=Tablet-accessories&product=1719056
might fit your needs.
It has served me well for the past month.
jschall said:
I'm not sure what you mean by "play-through", but if you mean a case that lets you use the tablet without removing it from the case, then this one from The Source :
http://www.thesource.ca/estore/prod...e&category=Tablet-accessories&product=1719056
might fit your needs.
It has served me well for the past month.
Click to expand...
Click to collapse
Yeah, thats exactly what play-through means in the case world
I'll check that out. Thanks.
I JUST ordered the official Acer Carbon Fiber case previously mentioned in this thread. Canadian suppliers started getting them this week and I was able to custom order it from a local computer store. Unfortunately it's on order still with the supplier (Synnex Canada) with no ETA.
http://www.amazon.com/Poetic-Leathe...IETO/ref=sr_1_1?ie=UTF8&qid=1318615830&sr=8-1
this case looks promising, but it is a preorder onle right now.
Best Buy is now selling the Acer cases on their site. Probably cheaper shipping than Acer's 10 buck shipping. http://www.bestbuy.com/site/Acer+-+...10275571&skuId=3530371&st=acer case&cp=1&lp=3
Thanks for the link, carbon case is on the way. The tablet keeps sliding down in the Acer naugahide one.
Sent from my A100 using XDA Premium App
Just got my carbon fiber look, acer case today, excellent choice. feels good in the hand, will have to see how it holds up over time.
I'm thinking of ordering this as well to see how it is.
rooCASE Ultra Slim (Black) Leather Case Cover Cover with Stand for Acer Iconia Tab A100 7-Inch Android Tablet Wi-Fi
http://www.amazon.com/rooCASE-Leath...C2OQ/ref=sr_1_8?ie=UTF8&qid=1318998536&sr=8-8
This is a skin rather than a true case, but what do you think of this?
Black Carbon Fiber Film Shield & Screen Protector for Acer Iconia Tab A100 7-Inch Tablet - Armorsuit MilitaryShield
http://www.amazon.com/Carbon-Shield...4XQ2/ref=sr_1_6?ie=UTF8&qid=1318998536&sr=8-6
I ordered one yesterday to try out.
Great case for A100
I purchased this case about a month ago. It was sent from China so it takes at least 3 weeks to arrive .
After a week of break in period the case feels great to the hands. The leather used on the outside of the case acquires a nice soft feel and has NO leather smell like the Acer smelly case.
All ports and buttons are accessible and the A100 hold firmly in the case with no screen visibility restrictions.
The case open steno style as opposed to book style in the portrait screen position.
As a bonus they also include a very nice NON glare screen protector.
$16.95 with free shipping....it's a great deal.
http://www.skindigitalstore.com/categories/Acer-Iconia-Tab-A100/
Product Description
Compatible with: Acer Iconia Tab A100 with 7-inch display tablet (Not for W100, A500, W500)
High quality GENUINE LEATHER (Not synthetic/faux leather) case designed to fit perfectly your Acer Iconia Tab A100 7"
Soft genuine leather outer/inner gives tactile and aesthetic appeal and adds strength and durability to the case
Rigid yet flexible exterior with a soft padded microfiber interior
Contrasting white stitching to add a distinct level of style
Cut outs allow access to all buttons, ports and sensors
The case is designed to fold back, so you can read with just one hand
The front flap can be used as a stand for a comfortable viewing angle
Provides excellent protection from scratches and bumps
Ultra secure magnetic closure
Stylish, compact & lightweight
Easy to install and remove!
Package content:
1 x Black genuine leather case for Acer Iconia Tab A100 (Tablet not included)
1 x Anti-Glare screen protector and cleaning cloth
ygthb said:
Just got my carbon fiber look, acer case today, excellent choice. feels good in the hand, will have to see how it holds up over time.
Click to expand...
Click to collapse
Got my carbon Acer case in, much better than the black leather one. The easel stand is MUCH better.
Sent from my A100 using XDA Premium App
kdkinc said:
I purchased this case about a month ago. It was sent from China so it takes at least 3 weeks to arrive .
After a week of break in period the case feels great to the hands. The leather used on the outside of the case acquires a nice soft feel and has NO leather smell like the Acer smelly case.
All ports and buttons are accessible and the A100 hold firmly in the case with no screen visibility restrictions.
The case open steno style as opposed to book style in the portrait screen position.
As a bonus they also include a very nice NON glare screen protector.
$16.95 with free shipping....it's a great deal.
http://www.skindigitalstore.com/categories/Acer-Iconia-Tab-A100/
Product Description
Compatible with: Acer Iconia Tab A100 with 7-inch display tablet (Not for W100, A500, W500)
High quality GENUINE LEATHER (Not synthetic/faux leather) case designed to fit perfectly your Acer Iconia Tab A100 7"
Soft genuine leather outer/inner gives tactile and aesthetic appeal and adds strength and durability to the case
Rigid yet flexible exterior with a soft padded microfiber interior
Contrasting white stitching to add a distinct level of style
Cut outs allow access to all buttons, ports and sensors
The case is designed to fold back, so you can read with just one hand
The front flap can be used as a stand for a comfortable viewing angle
Provides excellent protection from scratches and bumps
Ultra secure magnetic closure
Stylish, compact & lightweight
Easy to install and remove!
Package content:
1 x Black genuine leather case for Acer Iconia Tab A100 (Tablet not included)
1 x Anti-Glare screen protector and cleaning cloth
Click to expand...
Click to collapse
Nice! The more accessories the better...hopefully that's an indication of popularity of the A100.
Sent from my Acer Iconia A100 using XDA Premium for Android
best buy has an Acer A100 case with bonus sony headphones for 30 dollars in store. It was in their ad good until oct 31.
http://www.bestbuy.com/site/Acer+Ta...99167500050000&slref=10&id=pcmprd167300050000
My Acer Carbon Fiber case is backordered, so I decided to try another case instead. But I couldn't decide between them, so I ordered two cases from amazon to try out. Figured since there's not much info on these yet, I might as well be the test subject
These are the 2 cases:
rooCASE Multi-Angle (Black) Leather Folio Case Cover with Stand and Elastic Hand Strap for Acer Iconia Tab A100 7-Inch Android Tablet Wi-Fi
$24.95
I especially like that there's an elastic strap on the back for you to securely hold the tablet one handed in portrait mode for e-reading type activities.
rooCASE Ultra Slim (Black) Leather Case Cover Cover with Stand for Acer Iconia Tab A100 7-Inch Android Tablet Wi-Fi
$27.96
rcummings100 said:
My Acer Carbon Fiber case is backordered, so I decided to try another case instead. But I couldn't decide between them, so I ordered two cases from amazon to try out. Figured since there's not much info on these yet, I might as well be the test subject
These are the 2 cases:
rooCASE Multi-Angle (Black) Leather Folio Case Cover with Stand and Elastic Hand Strap for Acer Iconia Tab A100 7-Inch Android Tablet Wi-Fi
$24.95
I especially like that there's an elastic strap on the back for you to securely hold the tablet one handed in portrait mode for e-reading type activities.
rooCASE Ultra Slim (Black) Leather Case Cover Cover with Stand for Acer Iconia Tab A100 7-Inch Android Tablet Wi-Fi
$27.96
Click to expand...
Click to collapse
should have google it
available to Canadian for $30.21 + $3.93 HST --->>> free shipping too !!
way cheaper then Acer official store !!
here:
http://www.toners.ca/ecuisp/~toners..../product/productDetail.jsp?productId=1008158
and here for $27 .... not sure about shipping....the previous seems better choice as the shipping is FREE !
http://www.directdial.com/LC.ACC0A.036.html
and here for $22:
http://www.comtec.ca/Acer-Tablet-Carbon-Fiber-Folio-Case-For-A100-Series-Tables-Only-LC.ACC0A.036
There are other vendor that carry this same case...they all are way cheaper then Acer official store !! just google !
UnicornKaz said:
should have google it
available to Canadian for $30.21 + $3.93 HST --->>> free shipping too !!
way cheaper then Acer official store !!
here:
http://www.toners.ca/ecuisp/~toners..../product/productDetail.jsp?productId=1008158
and here for $27 .... not sure about shipping....the previous seems better choice as the shipping is FREE !
http://www.directdial.com/LC.ACC0A.036.html
and here for $22:
http://www.comtec.ca/Acer-Tablet-Carbon-Fiber-Folio-Case-For-A100-Series-Tables-Only-LC.ACC0A.036
There are other vendor that carry this same case...they all are way cheaper then Acer official store !! just google !
Click to expand...
Click to collapse
Yes, I know how to google
I found all of those stores weeks ago, literally all of them, plus some others. Contacted each one and was told they had no clue on ETA, and they wouldn't sell to me until they had stock. So through my office at work I had my boss contact the universal Canadian supplier for these cases, Synnex. We sell computer hardware to corporations, so we order from there all the time, just usually in large quantities. In this case my boss made an exception for me and ordered a single unit.
I got a much better price than these stores
But unfortunately it turned out Synnex didn't get as many in as planned and now I'm stuck waiting for that order. I don't want to cancel because I asked a favour of my boss to order it for me...looks bad on me coming back now saying "uh, can you cancel that?"
But if these rooCase cases come and suck, i'll do just that and buy from one of the stores you mentioned. I've got no experience with any of them. Do you?
So did anyone get a RooCase? Thoughts?
Sorry about that. I totally forgot to post my reviews!!
I now have 3 cases believe it or not. The rooCASE Multi-Angle , The rooCASE Ultra Slim, and the Acer Carbon Fiber.
I also have the "Black Carbon Fiber Film Shield & Screen Protector - Armorsuit MilitaryShield". Please see my previous posts in this thread for links and pictures. They're clearly labeled.
Here's some quick thoughts, and I can do proper reviews tomorrow or Monday.
Black Carbon Fiber Film Shield & Screen Protector for Acer Iconia Tab A100 7-Inch Tablet - Armorsuit MilitaryShield
This is a pretty standard sticker type protector that doesn't offer mch protection beyond scrapes and scratches. But it does look great on the tablet. I've had a few carbon fiber cases and similar protectors for other devices, and they all look the same. If you've seen the official Acer Carbon Fiber portfolio case, this has the same pattern.
It was fairly easy to install, with the only challenge being lining up the separate pieces. There's a huge piece for the back, then pieces to cover all 4 sides.
The screen protector is pretty good. It went on very easily, is meant for our device so there's no custom cutting needed on your part. It fits perfectly.
The tablet looks really good in this skin. But I'm not sure what use it really is. On cell phones the idea is you can keep it in your pocket without scratches from keys and change and what not, but we don't exactly do that with these tablets.
The screen protector on the other hand is great.
rooCASE Multi-Angle (Black) Leather Folio Case Cover with Stand and Elastic Hand Strap
This case is really good. Pretty high quality leather and very well made. It fits the tablet perfectly. The inside seems to be some sort of microfibre cloth and feels great. The elastic handstrap is somewhat useful, but more gimicky than anything else. The stand portion works well. You can leave it on a desk and watch a movie like that easily. Or more functionally, you can use a bluetooth keyboard with the tablet standing up quite well. The lid is also magnetic, so it stays shut when you close the case up. It's not a very strong magnet but it does the job quite well.
rooCASE Ultra Slim (Black) Leather Case Cover Cover with Stand
This case is fantastic. It's the same high quality leather as the above case, same inside microfibre. But it really is very thin. Much thinner than either the above case or the official Acer Carbon Fiber one. There's no magnetic latch, no elastic or anything to hold the case shut. But it really doesn't need it - the case stays closed just fine on it's own. When open the cover folds easily around to the back, and you hardly notice it's there while using the tablet. The right side and top/bottom has some 'extra' leather sticking out about 1/3rd of an inch, because that's how they sewed it shut to keep it so slim. It's hardly noticeable after a few minutes and not a negative at all. The cutouts match up perfectly with the buttons and slots, and unlike the Acer one, there is plenty of protection where there isn't something to access under the case.
Official Acer Carbon Fiber case:
I don't remember much about this off the top of my head (I'm writing this review in the middle of the night because I can't sleep) so I'll edit the post and do a more formal review tomorrow. From what I remember:
The case looks beautiful. It has pretty good protection on the front and back, but the protection on the sides is lacking. There are only a few straps holding the case in. Thickness wise, it's thinner than the Roocase multi-angle, but considerably thicker than the roocase ultra-slim.
So after all that, here's what I decided:
I've got the Armorsuit MilitaryShield skin and screen protector on. The screen protector helps provide ease of mind while using the tablet. And I didn't want to take the skin off since I paid good money for it and it doesn't get in the way of the other proper cases. It also adds some protection to the sides that are exposed in the various cases, especially the Acer case.
Case wise...I'm using the rooCASE Ultra-Slim. It simply feels the best in your hand is the lease obtrusive in use, yet provides great protection. I've dropped the tablet a few times, once onto my tile floor by accident, and the tablet was fine. I love how thin it is compared to the other cases.
Again, I'll do a proper review in the next couple of days with some pictures.
Got questions? Ask away
I have been using these on my Galaxy S2 and Tab. I didn't like the idea when I was browsing for a new case on Ebay, but when I got it, I soon changed my mind!
If anyone finds anything like it then please post on this thread!
http://www.ebay.co.uk/itm/Gel-TPU-C..._MobilePhonesCasesPouches&hash=item43a90b8802
looks like a great idea....but i think i would prefer if the clear stand part be black or grey in colour instead
They come in many different colours and styles. And with stand / without stand
I found something very similar (or identical):
http://www.alibaba.com/product-gs/522134318/S_Line_Crystal_Plastic_TPU_Protector.html
There are other variants on alibaba, the only problem is that the minimum quantity is usually 50-100 pieces :-/
EDIT: found it on ebay: http://www.ebay.com/itm/BLACK-HYBRI...AU_MobilePhoneAccessories&hash=item48436c47a9
I bought one before seeing this thread.
When I receive it, I'll tell you if its good/bad etc
when i find something good
，will let you know
I searched on ebay for "galaxy note kickstand case TPU" and got a result:
http://www.ebay.com/itm/BLACK-HYBRI...AU_MobilePhoneAccessories&hash=item48436c47a9
I eneded up ordering for around $8 the kickstand case with included car charger and 3 screen protectors. Will reply here with a review here once I get it.
I bought one of these too. I figure you can't go wrong for $5.
Sent from my GT-N7000 using Tapatalk
For $8 I got a car charger, 3 screen protectors and the case.
The case:
Black TPU and Grey Silicon.
Kickstand is Silicon and a part of the case's mainframe.
The Kickstand works well.
The TPU is knife-proof and tamper proof, but dont drop it from a 2.5+ metre height.
The TPU has textured sides which help with grip A LOT.
All the holes and ports (pen) are easily accessible.
The buttons are covered but NOT hard to press.
Whole case is quite thin, so its not very "drop proof" but very resistant to heat and cuts.
Did I say it is thin, so it still fits in my pockets easily.
Verdict: 9/10
This has replaced my Carbon Fibre case (which was protective). This case is a MUST HAVE for any NOTE owners.
Sidenote: I also bought the GPS holder ($6) from the same seller "telegaming", it is also a high quality piece.
Hey guys, I'll make this short and sweet. I've been looking around the boards for a few weeks for a simple flip cover that wont break the bank or damage my phone.
All I need is a good fit, earpiece hole and sleep/wake function (not spending $50 on the official LG flip cover though)
I came across this one on amazon:
http://www.amazon.ca/Nillkin-Fruit-...2338300&sr=8-1&keywords=Nexus+5+Nillkin+fruit
I haven't seen any reviews of this case other than a single sentence saying they didn't like the thickness and it is only one person's opinion.
Has anyone else had experience with this case? I'm mostly concerned about the polycarbonate inside scratching the corners of my Nexus.
Any input on this case is appreciated, but I am also open to other suggestions for cases that meet the above criteria.
Thank you!
I just got this in the mail today. Only $7.99 shipped from this seller:
http://www.ebay.com/itm/271320259952
I've always liked Nillkin products. Good quality stuff. This case is no exception. I got the black one. The case is a glossy polycarbonate. Fairly thick. It's a gunmetal metallic color. The flip cover is a sturdy leather like cover. The magnetic closure works really well. Sleep/Wake works great. The design of the magnetic closure reminds me of the great Poetic cases for tablets. The entire case gives the phone some weight and a very premium feel and look. Wireless charging works fine with the case on. I think it's better than the LG case and for only $7.99!
Hello
The serial number of the Nillkin Fresh Fruit can be used on a single device? I've first tested the case on my phone but now I want to use it on another phone. On the second phone it does not accept the serial number. What can I do ?
To be brief, I purchased 6 cases. Each had its advantages. The best case is the Spigen Tough Armor case with built in kickstand. It is a dual layered case but you can insert and remove the case while both layers are intact. Great protection and styling. Buttons are nice. Not too thick. I wish the side edges were smoother but I can live with it. Got it from ebay for about $17.
My 2nd choice is the Diztronic tpu case. It is thin and light. Nice to hold with a matte coating. Screen is protected by the edges. Styling is nice and simple. Buttons are fine. Not as much protection as the Spigen case and no kickstand but I like it's simplicity.
It goes for about $13 on ebay.
I like to switch off between the 2 cases.
Just wanted to post my thoughts.
The first pic is the Spigen Tough Armor
The 2nd pic is the Diztronic. It may also come in a hard version.
Thanks for giving your opinion, there are too many cases and little ranks ;D
If you want a tough case; the Otterbox Symmetry is amazing. It has the standard Otterbox protection, without all of the bulk of a Commuter case. It's a nice looking case without all of the cartoonish angles and lettering. I like it better than the Spigen Tough Armor (which is a very good case, BTW). I was able to pick up a black Symmetry case on Amazon for $19 (prime).
There are literally dozens of cases for this phone. The one I want and can't find is the Zizo Bolt Series for the 2 XL. I've seen the reviews on that case - and I'd love to have one. They make them for the standard Pixel, the Pixel XL, Pixel 2, and Pixel 3 / 3 XL.... but I haven't seen one for a 2 XL - which is odd.
If you happen to find one, please link it in this thread.
Thanks
Im all about the Spigen Case, Its been a great case for me so far.
I've been using Diztronic for a long time, at least since my Nexus 4. It is hard to top. We got the Spigen Tough Armor case for my wife's Galaxy S7 and discovered it was too thick for our car vent magnetic holder. I assume same issue with Pixel 2 XL version? I was able to snag a navy blue Diztronic before it fully went sold out, unfortunately on back order though so who knows, currently says Arriving Tuesday on my Amazon order.
In the meantime, I have a Spigen Thin Fit. It freaks me out as it is really too thin on the screen side. it is a good compromise for folks that dont want a larger case though. It also has a built in hole for my magnet for my vent mount.
Only recently got my Pixel, but I have a history of being quite fussy about cases, as well as being stingy!
I bought a slim plain hard back cover, which was fine, but then found this:
https://www.ebay.co.uk/itm/Caron-Fi...var=553503155444&_trksid=p2060353.m1438.l2649
It's honestly perfect. covers everything except the screen, but adds virtually no bulk, you almost can't tell it's a case. Doesn't mark or fingerprint either.
TangerineTractor said:
Only recently got my Pixel, but I have a history of being quite fussy about cases, as well as being stingy!
I bought a slim plain hard back cover, which was fine, but then found this:
https://www.ebay.co.uk/itm/Caron-Fi...var=553503155444&_trksid=p2060353.m1438.l2649
It's honestly perfect. covers everything except the screen, but adds virtually no bulk, you almost can't tell it's a case. Doesn't mark or fingerprint either.
Click to expand...
Click to collapse
Does it cover the bottom as well? Can you share some pictures? And how much does it weigh?
It's absolutely perfect. Weighs virtually nothing. Looks like its part of the phone. Covers everything but the screen.
Best one with grip on back https://www.ringkestore.com/collect...pixel-2-xl-ringke-bevel?variant=3054593081371
Regard
http://https://www.aliexpress.com/item/32866998078.html?spm=a2g0s.9042311.0.0.27424c4d4lC9vf#
This is literally the best case I have had. Cheap and classy. makes my phone look super classy.
Mokoemi Fashion Lichee Pattern Shock Proof Soft 5.0"For Google Pixel 2 Case For Google Pixel 2 XL Cell Phone Case Cover on Aliexpress.
This is a brilliant cover
Bought one of these - cheap, feels really nice, makes the phone non-slip, stops it sliding out of your pocket. Shame it doesn't cover the top and bottom, but it's still a great case, and different from most
https://www.ebay.co.uk/itm/For-Goog...var=622068132687&_trksid=p2057872.m2749.l2649
Another obscenely priced case, but for me, it made the best sense. Spigen makes one almost the same, for a little less, but the Torras looks like it offers a little better bumper support. Another reason I bought this was for the side mounted S-Pen holder. You're able to lie the phone flat, and the lip that the S-Pen holder creates, is great for easy opening and doubles as a handle when the phone is open.
https://www.amazon.com/gp/product/B0B5CZYR4F/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I use the Spigen ThinFit P and Aramid Backcover. I like the Aramidgrip. The Pen must be in the Fold. Without is every Thing a bad Solution.
spotmark said:
Another obscenely priced case, but for me, it made the best sense. Spigen makes one almost the same, for a little less, but the Torras looks like it offers a little better bumper support. Another reason I bought this was for the side mounted S-Pen holder. You're able to lie the phone flat, and the lip that the S-Pen holder creates, is great for easy opening and doubles as a handle when the phone is open.
https://www.amazon.com/gp/product/B0B5CZYR4F/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I need the slim profile. Is the Torras case slimer than the Spigen thin fit one please?
VDK1 said:
I need the slim profile. Is the Torras case slimer than the Spigen thin fit one please?
Click to expand...
Click to collapse
I couldn't say. I'm sure you can find their measurements somewhere.
I had a Torras case and their defective case put major dents into the midframe bezel of the case causing about $600 worth of damage. Torras support was completely worthless. Highly recommend to avoid that brand.
I have zfold since 3 weeks and i confirm some case are terrible for metal borders, there are particles that get inside... I tried to polish with a cotton ball and car polish, it removed the paint off it became chrome.