Related
Yep, I broke my galaxy. Screen and touch sensor works awesome, but screen is fully shattered. Searching at the forum gave me one positive result: http://forum.xda-developers.com/showpost.php?p=23644712&postcount=6
But i cant find any guide anywhere. If someone know how to make this kind of operation please leave your post or guide, it would be great. Thanks in advance!
Hello,
youtube is your friend
http://www.youtube.com/watch?v=65pvAINg2ME&feature=my_favorites&list=FLhOahoxI-440fS-S2edtp7w
glass only video - hmmm...
exeq said:
Hello,
youtube is your friend
http://www.youtube.com/watch?v=65pvAINg2ME&feature=my_favorites&list=FLhOahoxI-440fS-S2edtp7w
Click to expand...
Click to collapse
the above is for the digitizer w/glass - the below is for glass ONLY
http://www.youtube.com/watch?v=CfuTVjI_Wao
It is very risky to replace the glass only. Doing it this way increases the risk of damaging the AMOLED panel, either by overheating it or scratched/cracked by the broken glass. I've explained it before; if you want to replace the glass only, you'll need to separate the screen assembly from the frame first, then separate the glass from the AMOLED panel. You might end up breaking the panel anyway, so might as well replace the whole thing. But you can give it a go. It should be possible to remove the glass while keeping the AMOLED panel in the frame, because the panel itself is very fragile.
I replaced only the glass on mine.
igor45 said:
the above is for the digitizer w/glass - the below is for glass ONLY
Click to expand...
Click to collapse
Hi. This is my story about SUCCESSFULLY replacing only the glass of s2.
Background, you can skip this:
Few months ago I broken the glass of my beloved S2 in an accident, but because I had a screen protector the pieces of glass were kept together and the phone was 100% usable, only the image was distorted because of broken glass.
So I searched the available options: replace the whole display for a price of more than 100euro. Buy a defect s2 with good screen, but didn't found any lower than the previous price.
I had a previous experience with an Ipod Touch with the same problem, when I ordered the glass from ebay and went to a local phone repair shop that destroyed the Ipod. It was usable before going to that shop.
So I decided to give it a try and try to change it myself. I'm a programmer with what can be called poor electronic and hardware skills. So if I was able to do it, and you were able to find this post, you can replace it too. But after seeing some videos I had more confidence on my skills than of those repair specialists that were not careful with the other device.
First I found a clip on youtube about why you CAN'T change only the glass on S2. But I found also the above video with a interesting method, but it required a Molybdenum string that I couldn't found at a good price. Actually I believe that the shipment to Romania made the price to high for the string.
After researching I found the SOLUTION: on a page or youtube clip about how to remove the broken glass. But I've lost the link. Anyway, the procedure was simple. I remember that the video was about replacing the glass on a Galaxy S3.
So I ordered the replacement glass and some adhesive (finally not used) from ebay.
After I got the replacement parts, I opened the phone, you can find somewhere online the instructions how to do it.
For removal I used a pack of plastic poker card. It's needed something to not be to hard to scratch the digitizer, but hard enough to remove the broken pieces of glass.
I started removing the pieces around the Home button to get a feel of the process, and proceeded to remove all the pieces of glass and glue. It took around 3 hours to finish it and 48 cards. You need to lift the broken pieces with great attention and patience. It's not a hard job, but it takes time. Maybe with a hot gun is easier to remove, but when I received the replacement I was anxious to start and did not wait to procure one. During the whole process I kept the phone started to be sure that I did not broke the screen. In case of possible breakage or of a bad scratch I thought that I don't need to continue the procedure. Maybe is not recommended to keep it running, but it gave me a positive feedback that everything is ok.
After removing all the pieces of glass and glue I was able to see some fine scratches with a black background. I used some dust removing solution and then I attached the new glass. I only fitted the new glass on the place and I believe there were some glue left on edges that keep it in place because I did not added any other glue and it did not moved until now. With the new glass the scratches from the digitizer are not visible at all. And the phone works as new, the touchscreen was not damaged at all.
So it's completely possible to replace it.
Before fitting the new glass the cleaned touchscreen was like the touchscreen on S4: it was only needed to hoover with a finger at some distance above, but not touching . I remember that the replacement of my glass was before the release of S4 and when I found about this feature I knew that I already had something like this on my S2.
I don't remember having any other difficulties during the replacement except the removal of broken glasses. And I used this phone continuously without problems since.
Only last night the phone stopped charging and I had to replace the charging port, flex ribbon; but it was not related to glass replacement.
I don't remember if it was needed to open the phone for glass replacement because I opened it when it broke to inspect it and I opened it also few time since then for various tasks.
The total price of replacement parts was below 10$, with glass, screen protector and adhesive ordered from ebay. I ordered also a case to protect the edges for future dropping and was a smart investment. The pack of cards I had from poker set, but It shouldn't be so expensive.
Success with your replacement.
KAWIN tempered glass screen protector for SAMSUNG GALAXY S2
buffon95 said:
Yep, I broke my galaxy. Screen and touch sensor works awesome, but screen is fully shattered. Searching at the forum gave me one positive result: http://forum.xda-developers.com/showpost.php?p=23644712&postcount=6
But i cant find any guide anywhere. If someone know how to make this kind of operation please leave your post or guide, it would be great. Thanks in advance!
Click to expand...
Click to collapse
KAWIN tempered glass screen protector for SAMSUNG GALAXY S2 top quality with best price !
http://www.xkxfilm.com/en/samsung/40-41.html: :good:laugh:
Don't try this at home kids...
I now back to my desire z after the galaxy screen is toast. JUST the heating alone destroyed it. ... Now gonna buy the LCD/screen assembly and do it right.
Sent from my Desire Z using xda app-developers app
if you are not a technician, I suggest you give it to someone REALLY capable of, what do you mean it is not at all easy and the risk of doing damage is very high.
Otherwise follow the advice that was given to you, buy the whole block
Necro thread, but I agree, it is not worth doing so. In order to be done properly, you need to have a very thin wire to separate the two pieces. Not something i would do myself. Much better to replace the whole assembly instead.
Relevant
test
Hello,
I recently dropped my phone resulting in a cracked screen. I had replaced the screen myself. The phone still functions just fine with one minor problem. The glass screen isn't 100% touching the digitizer (at least from what I can tell). There is a gap between the digitizer and the replacement glass. I recall that when I was removing the cracked glass, there was a layer of adhesive I had removed because the glass shards were pretty stuck all over it. So does anyone know how to resolve this problem or where to buy that adhesive so there will be a perfect fit?
I've attached some images. One is at rest and you can probably see the dark circle in the middle of the screen.
The second is when I put some pressure on the screen, the *bubble* gets bigger. Any ideas?
Thanks,
Out of luck....
Unfortunately, you are out of luck. Your only option is to purchase the LCD/Digitizer/Glass preassembled. (Around $250)
The design used by Samsung, I believe weakens the glass on the Galaxy S3. Take for example the iPhone 5 which also utilizes Gorilla Glass 2, it is more durable than the S3.
I would think that people would band together and call for a class action law suite against Samsung to replace all screens free of charge for the first incident, or you can sell the phone and buy a quality phone.:highfive:
Buy a new phone.... note2 :thumbup:
twanskys204 said:
Buy a new phone.... note2 :thumbup:
Click to expand...
Click to collapse
The Note2 is more durable than the S3, but the glass is still more prone to breaking than the iPhone 5. Again, Samsung is not a quality manufaure, they are a company trying to push out products in quantity, not quality. Quite a shame! Again, to the OP....choose a quality phone which is designed in America
Lol this is funny cause I have droped my note 2 from nipple height all the time....just breaks open and I put the battery in then cover and bam it works
So, I shattered the glass on my Galaxy S3 today. It's pretty messed up (see the attached picture), but the touch works, even in the damaged areas. So it seems it's only the glass that needs to be replaced, with something like this:
http://www.ebay.co.uk/itm/Blue-Fron...K_Replacement_Parts_Tools&hash=item417515ee67
Correct?
Yep, goodluck. Replaced the same on my Galaxy Note 2. all good now.
Yeah.... if i were you and have the funds, I would replace the complete assembly ($100-$150 on ebay) and be happy.
I shattered the screen on mine and replaced the digitizer alone and now the screen has freezing/unresponsive issues. I should of known better and replaced the complete assembly, I got what i payed for, literally less than that actually. Now i have a semi-new gs3 collecting dust until i save up for a complete lcd.
1slow4G said:
Yeah.... if i were you and have the funds, I would replace the complete assembly ($100-$150 on ebay) and be happy.
I shattered the screen on mine and replaced the digitizer alone and now the screen has freezing/unresponsive issues. I should of known better and replaced the complete assembly, I got what i payed for, literally less than that actually. Now i have a semi-new gs3 collecting dust until i save up for a complete lcd.
Click to expand...
Click to collapse
The screen seems to work fine, touch/responsiveness is working fine in the areas. I have no intention of spending the £100-120 on a complete new screen (again...). I'd rather save that for a Nexus 5.
I'll post again when I receive the part and it's been replaced.
MadsBen said:
The screen seems to work fine, touch/responsiveness is working fine in the areas. I have no intention of spending the £100-120 on a complete new screen (again...). I'd rather save that for a Nexus 5.
I'll post again when I receive the part and it's been replaced.
Click to expand...
Click to collapse
Mine was working fine with cracked digitizer as well. The problems started with new digitizer. Seems that when typing hard enough the digitizer touches LCD and causes to freeze up. Anyways, Good luck.
Sent from my neXus⁴ using Tapatalk 2
Actually the glass on an s3 is just that, glass. The digitizer is fused together with the LCD. However glass is glued to the LCD which can make it very difficult to replace. If you've never taken on the repair of a screen before then I would say you'll be more likely to break the LCD than not in your replacement of the glass. But again it is possible if you are very slow and very careful. As someone else mentioned though it's much easier to replace the whole assembly.
It didn't went well. I wasn't too carefull. In the bottom, the glass was too shattered, so when I tried to lift it, a piece with glue got stock and lifted the digitizer. So now that don't work. I'm not gonna spend £100-120 on a new digitizer, I'm gonna settle for my good old Nokia 6300i (and Nexus 7...) and wait for the Nexus 5.
I would wait for the n5.. gs3 is a dying trend already.
Its hard like everyone said , if your really gunna do it watch videos online and be prepared. If you know anyone that has done it successfully ask for help or tips
ouch didnt see u tried it already
the same happened to me on my wife's white sgs3 trying to be the savior of the day turned out to be an expensive digitizer replacement of $200 instead of the $8 glass replacement. I rushed the glass removal and cracked the lcd screen. I could have ordered one on ebay for $100 but wife needs the phone the next day so i decided to get it repaired locally.
Just replace the glass. A lot of care for changing it, but it is not so hard to do. I did it 2 weeks ago, and all is all right.
My 2 cents
bidibull14 said:
Just replace the glass. A lot of care for changing it, but it is not so hard to do. I did it 2 weeks ago, and all is all right.
Click to expand...
Click to collapse
Wanted to warn that changing the glass is not for everyone. It takes patience and zen. If you rush it, you will likely break LCD and spend even more $$$ that you would have otherwise. Also following notes:
1. Watch at least a couple of youtube videos before starting.
2. Heavy duty heat blower works much better than a hair dryer. Of course, don't go crazy, as it's possible to melt the phone with it
3. S III has a wire at the bottom (the one which goes to the buttons). If you damage it, you will need to replace whole LCD, there is [almost] no chance you will be able to fix this wire. So, always start removing glass starting with the top of the phone
4. Heavily cracked glass is hard to remove, as it crumbles. To make it easier, a) put a scotch tape on top of glass, so that the small pieces stick to it, and b) use a lot of heat
5. Everybody advises to use plastic tools, personally I used swiss army knife with high level of success, and never had a problem scratching LCD. Your mileage may vary, but using metal blade certainly makes life much easier, especially in heavily cracked glass situation.
6. If you do use blade, it often is enough to get blade just a little bit under a glass, and then simply apply heat. Big chunks will unglue all by themselves.
7. Remember, that failure is always an option. Don't use it on the phone, if you know that you desperately need it working right this day, if you don't have a plan B.
1slow4G said:
Mine was working fine with cracked digitizer as well. The problems started with new digitizer. Seems that when typing hard enough the digitizer touches LCD and causes to freeze up. Anyways, Good luck.
Sent from my neXus⁴ using Tapatalk 2
Click to expand...
Click to collapse
same freezing issue on mine... apparently the hardness of Gorilla2 is much greater than the knockoff glass replacements. The replacement glass on ebay and kijiji may not be authentic and that is why it bends slightly when pressed harder (in fact mine cracked completely when I applied too much pressure)
i replaced my glass too (about month ago), and discovered that , the "freezing issue" come's when you press too hard.. that the glass touches lcd.
after quick google-ing , i've found that they suggest to apply uv glue (octa glue) , to fix that.
have somebody tried that ? is it worth that much effort to mess with liquid glue ?
hani93 said:
i replaced my glass too (about month ago), and discovered that , the "freezing issue" come's when you press too hard.. that the glass touches lcd.
after quick google-ing , i've found that they suggest to apply uv glue (octa glue) , to fix that.
have somebody tried that ? is it worth that much effort to mess with liquid glue ?
Click to expand...
Click to collapse
I've heard about that glue too. I'm considering switching mine, because when I repaired I reused the glue of the original glass, and know I had dust between the glass and the lcd -.-
My concern is about the uv light, don't know if we could put in the sun to substitute it.
I was researching how to replace the glass on an iPhone not too long ago and watched a video where the guy used the UV bonding agent. Long story short he said you can use sunlight to cure it but it takes substantially longer than using a UV lamp. I don't know exact time for sunlight but apparently it would work.
Also it appeared to be a long delicate process of removing the current glue from the digitizer and LCD without damaging it. But I'm sure anyone who has already replaced the glass knows how tedious the process is.
m1batt1 said:
I was researching how to replace the glass on an iPhone not too long ago and watched a video where the guy used the UV bonding agent. Long story short he said you can use sunlight to cure it but it takes substantially longer than using a UV lamp. I don't know exact time for sunlight but apparently it would work.
Also it appeared to be a long delicate process of removing the current glue from the digitizer and LCD without damaging it. But I'm sure anyone who has already replaced the glass knows how tedious the process is.
Click to expand...
Click to collapse
it's not that hard to remove factory gle there..
for example, i removed mine, by rolling the glue with fingers.
just make sure, that you don't apply too much pressure to lcd.
and after that, clean up lcd form dust/fingerprints, and you are good to go.
and for removing glass, i used usual/ stronger kitchen knife (attached picture).
i replaced my glass 3 months ago.
i use normal hair dryer to remove glass and glass comes out almost as whole except for small broken pieces.
i think my scratch guard help in that.
i didnt use any additional glue or uv light.
nonresponsive screen is issue but only when you press too hard and press of power button resolve this issue.
but whole process of replacing galss took 2hrs
hello guys! yesterday the inevitable happened, and my phone fell off. since i can't make a photo of it, i'll put another one that looks similar.
http://cdn.gottabemobile.com/wp-con...-One-cracked-screen-HTC-Advantage-620x348.jpg
my question is, what needs to be replaced now? the whole display or only the glass? cause the whole display is a lot more expensive than the glass, and maybe i can save some money.
thanks!
bennymorogan said:
hello guys! yesterday the inevitable happened, and my phone fell off. since i can't make a photo of it, i'll put another one that looks similar.
http://cdn.gottabemobile.com/wp-con...-One-cracked-screen-HTC-Advantage-620x348.jpg
my question is, what needs to be replaced now? the whole display or only the glass? cause the whole display is a lot more expensive than the glass, and maybe i can save some money.
thanks!
Click to expand...
Click to collapse
Looks like just the glass. However, the glass is glued to the LCD, and I believe you need to heat it to soften the glue and pull the glass off (which can also result in breaking the LCD). Then glue the new glass to the LCD. None of which is that easy.
I tend not to be very successful with these types of repairs, and haven't personally tried it. So maybe others can speak more in terms of first-hand experience.
Send it to HTC. It cost me less for HTC to repair than it would have cost for me to buy the parts alone.
They replaced the screen, digitizer, housing, speaker covers, back cover all for £103 including 2 way shipping.
Less than 2 weeks for repair and good as new when it came back.
Hi, guys I have a question about the galaxy note 5 N920A. Is the display or should I say the digitizer screen is a two separate part?
My galaxy note 5 has a crack above and on top of the home button. the display and touch LCD works just fine without any kind of problems whatsoever. the only problem is that the crack seems to be spreading just like a crack windshield, which would soon look like a spider web. I would like to replace the crack plastic without changing the whole display screen:fingers-crossed:
I have check online for the display and to my dismayed the price is something I would like to ventured into. I also did further research and found quite a few which is describe as a panel screen for the display for only $10. So I am kind of confuse could this be also consider to be a tamper glass protector? Need advice please before I buy something that I might regret later on, since I am no novice with phone parts.
Thank you.
bnrrcast said:
Need advice please before I buy something that I might regret later on, since I am no novice with phone parts.
Thank you.
Click to expand...
Click to collapse
Hopefully you got your answer as its been a couple years since you asked, in case you didn't or anyone else thats curious about this, I recently replaced the screen on a Note 5, so have a bit of experience with it.
First to answer your question, a LCD screen and a tempered glass screen protector are 2 very different things. An screen is standard on every phone and is generally what you'd replace when your screen is cracked. On the other hand, a tempered glass screen protector is something you'd get and apply onto your phone's screen to protect it from hard drops onto the cement. They're quite effective depending on various factors but I definitely recommend them, if your screen is flat like the Note 5. Rounded edges screens like the S6 Edge thru S9, though tempered glass are available, reviews show they aren't nearly as effective, due to the "curved" wrap around edges, unfortunately.. Tempered glass screens have saved me a few times, after dropping my device, only the glass screen protector cracked, the phones LCD screen was undamaged. Tore off the cracked glass, $15 later, had a new on there. Small investment for the protection it gives, doubt a screen replacement will ever be around $15-20..
BTW, the Note 5s LCD screen is glass (Gorilla Glass 3, I think?) not plastic, as you mentioned..
Onto the bigger question, if you Google search "Note 5 teardown" you'll find quite a few tutorials w/ pics that breakdown the process, towards the end of them, after they've separated the LCD, you'll notice on back of it, there's a few small components, still attached. All of the teardowns, only mention the remaining removal difficulty is 5/5, the adhesive holding the screen much stronger than the LCD glass itself, though none have attempted the work..
Searching for LCD's on eBay, there's many listings of only the clear LCD glass, nothing else on back of it, which leads me to believe it is possible to do, but whoever attempts this may be the first and only one to have documented it.
If the pro's are semi-sketched from trying it, then, I'll trust their opinion, when replacing a friends Note 5 screen, we found a parts only device and did the swap, complete with all the little components on back.
I still have the rest of the parts, but it had water damage, so logic board is fried.
If anyone needs any other parts, PM me.