[Q] Headphone output volume low? - Galaxy Tab S Q&A, Help & Troubleshooting

currently using SONY DR-ZX302 headphones works well with my laptop but not good with my SM-T705..is there any way to boost headphone output..

yea we need some one to make our speaker and headphone louder

Try this app http://www.mediafire.com/?8k4l5mjh8to3m37 you can adjust the volume and stuff with this. It may work for you and if it does, try blow your speaker hope this helps

i tried to mod the file default gain in etc it was 32 i made it 40 now the tablet very very loud

can u explain the process excatly where u changed the volume to 40,,, i tried to mod deafult config but i m lost

soulmate53 said:
currently using SONY DR-ZX302 headphones works well with my laptop but not good with my SM-T705..is there any way to boost headphone output..
Click to expand...
Click to collapse
I looked everywhere for an answer and tried it ALL. from cleaning the jackport, reboot, restore to fabric options, and many more, but none of them worked! However, as I was trying not to go crazy trying so many weird things on my new not properly working tablet, I accidentally found the solution!!! why it works I don't know, but it does so here it goes:
1. Turn device off
2. Make sure your headphones are plugged ALL the way in (you should hear a click sound)
3. Press the on/off button and the volume up button at the SAME TIME
4. Once the screen is on let the on/off button go
5. DO NOT let the volume up button go
6. Wait until the tablet has finished loading all settings up.
7. Let volume up button go.
Problem should be fixed now. Enjoy

ad161 said:
I looked everywhere for an answer and tried it ALL. from cleaning the jackport, reboot, restore to fabric options, and many more, but none of them worked! However, as I was trying not to go crazy trying so many weird things on my new not properly working tablet, I accidentally found the solution!!! why it works I don't know, but it does so here it goes:
1. Turn device off
2. Make sure your headphones are plugged ALL the way in (you should hear a click sound)
3. Press the on/off button and the volume up button at the SAME TIME
4. Once the screen is on let the on/off button go
5. DO NOT let the volume up button go
6. Wait until the tablet has finished loading all settings up.
7. Let volume up button go.
Problem should be fixed now. Enjoy
Click to expand...
Click to collapse
Didn't work for me. Still have to listen at 13 at min to be at a reasonable level. Mostly need 15. I had headphones clicked all the way in, held power/volume up at the same time and released power as soon as screen came on with Samsung logo, let go of volume up when my lock screen came up. Anything I missed?

Related

[REQUEST] Universal 30-step volume mod for AOSP ROMs

Android is notorious--at least in my opinion--for having nowhere near enough granularity in the volume control. With only fifteen steps in the Media volume, music is often either thunderously loud or far too quiet, with no happy medium.
Sure, I did what most folks do and used MusicFX/DSPManager equalizer to boost volume across the board slightly, but while it gives me a decent volume for most of my music, it doesn't solve the problem, it just bandaids it. Each volume increment is too great a leap.
I did notice that a Nexus S ROM, AOSP+, had this mod at one point and I was wondering if it was possible to make a universal CWM-flashable zip that would enable a Galaxy Nexus running an AOSP ROM to gain the benefit of having more granularity in the volume control.
I'm also wondering why the hell Google thought only 15 steps was a good idea...
I'd like this too.
It's not just Android, I find many phones and mp3 players don't provide enough steps in volume.
You can change the amount of incall volume steps by altering "ro.config.vc_call_vol_steps=" in the build.prop to whatever you want (not tried this in ICS though, it might be different), but I don't think changing the amount of system volume steps would be that easy, it would probably have to done from source.
Meltus said:
You can change the amount of incall volume steps by altering "ro.config.vc_call_vol_steps=" in the build.prop to whatever you want (not tried this in ICS though, it might be different), but I don't think changing the amount of system volume steps would be that easy, it would probably have to done from source.
Click to expand...
Click to collapse
It's the number of steps in the Media volume I want to change. In-call volume needs to be turned up all the way in order for me to hear it, anyway.
Check here:
http://forum.xda-developers.com/showthread.php?t=1411317
Use that myself, and it works fine.
However in our roms it's called array_9.
tristan202 said:
Check here:
http://forum.xda-developers.com/showthread.php?t=1411317
Use that myself, and it works fine.
However in our roms it's called array_9.
Click to expand...
Click to collapse
Would this potentially break the screen-off volume controls to skip tracks? I'm game to give it a shot myself later on, but it'd be nice to know if it interferes with any other mods.
This is exactly what I want (for AOKP ROM hehe). I was at the gym listening to Google Music with headphones and kept going between two volume levels..one was too loud and the other too quiet, no perfect medium. Such a stupid thing of Google to overlook.
Or we need voodoo
Sent from my Galaxy Nexus using Tapatalk
synaesthetic said:
Would this potentially break the screen-off volume controls to skip tracks? I'm game to give it a shot myself later on, but it'd be nice to know if it interferes with any other mods.
Click to expand...
Click to collapse
No, it doesn't affect the volume rocker track skip.
Sent from my Galaxy Nexus using xda premium
I've modded the framework.jar file but I haven't actually put it in yet, because I've noticed something else that's rather odd. My GN will more often than not bump up two volume notches every time I press the volume key!
I'm not really sure what's going on here. Maybe I need to reboot, but when I press up or down on the volume rocker, about 80% of the time it moves by two steps rather than just one.
Edit: Applied the modified framework.jar. No problems so far, but my volume key still seems to skip two steps (though now the steps are half the size) after the first press. There's a pattern to it. The first press of the key will only increment once, but all subsequent presses in the same direction will increment twice. So if you have the volume set at 15/30 and press up once, it'll go to 16/30, but if you press again, it'll go to 18/30 instead of 17/30, and continue to go up by two every time until you press Volume Down. Pressing Volume Down at 18/30 will reduce it to 17/30, but then any subsequent Volume Down presses will decrement by two.
This is annoying, though it does seem to explain why I was fairly easily able to find a happy median volume on my Nexus S with 15 volume steps, but never quite was able to on the GN without a lot of ****ery. Because when I'm pressing the damn volume keys, it's not always only incrementing by one! >.<
Though now with the 30-step volume applied, the "skip two" effect is basically nullified. Still, I'd like it to work properly.
synaesthetic said:
I've modded the framework.jar file but I haven't actually put it in yet, because I've noticed something else that's rather odd. My GN will more often than not bump up two volume notches every time I press the volume key!
I'm not really sure what's going on here. Maybe I need to reboot, but when I press up or down on the volume rocker, about 80% of the time it moves by two steps rather than just one.
Edit: Applied the modified framework.jar. No problems so far, but my volume key still seems to skip two steps (though now the steps are half the size) after the first press. There's a pattern to it. The first press of the key will only increment once, but all subsequent presses in the same direction will increment twice. So if you have the volume set at 15/30 and press up once, it'll go to 16/30, but if you press again, it'll go to 18/30 instead of 17/30, and continue to go up by two every time until you press Volume Down. Pressing Volume Down at 18/30 will reduce it to 17/30, but then any subsequent Volume Down presses will decrement by two.
This is annoying, though it does seem to explain why I was fairly easily able to find a happy median volume on my Nexus S with 15 volume steps, but never quite was able to on the GN without a lot of ****ery. Because when I'm pressing the damn volume keys, it's not always only incrementing by one! >.<
Though now with the 30-step volume applied, the "skip two" effect is basically nullified. Still, I'd like it to work properly.
Click to expand...
Click to collapse
I will try and look into it later today when I get home. I will take a look at the source and see if any other values control the increments.
Sent from my Galaxy Nexus using xda premium
tristan202 said:
I will try and look into it later today when I get home. I will take a look at the source and see if any other values control the increments.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Just wanted to let you know that before you start plowing through a lot of code, the "skip a step" volume key bug is related to a mod included in the ROM I'm using, the mod that allows you to skip tracks by long-pressing the volume key while the screen is off.
Disabling that functionality immediately restored the volume keys to normal.
synaesthetic said:
Just wanted to let you know that before you start plowing through a lot of code, the "skip a step" volume key bug is related to a mod included in the ROM I'm using, the mod that allows you to skip tracks by long-pressing the volume key while the screen is off.
Disabling that functionality immediately restored the volume keys to normal.
Click to expand...
Click to collapse
Nice to know. Took a look at the AudioService.java file yesterday, but couldn't find anything that could explain the behaviour.

[Q] Volume control not working with screen off

When playing music with the screen off, neither the stock headphone's volume buttons nor the phone's volume buttons work, requiring the power button to be pushed. The pause button on headphones works. Any thoughts? Never was this way on my S2. On Wicked v5.1/faux kernel.
More clearly: this is with the screen completely off; it works fine on lock screen. What I'm hoping to have happen is the ability to control the volume when I'm using it as a music player, with the volume buttons simply working without turning the screen on. It doesn't work on Player Pro, nor the stock music player. It also doesn't change the volume on phone calls if when the screen is powered off, but is fine when the screen is off due to proximity. Thanks!
This happens to me too, i not tested very deeply, but when i reset the phone, works normally, just after a few apps (rooted ones included) it just stops working while screen is off...
Did anyone find a solution? I have the exact same problem! Model: I9500
EDIT: Guys I found the problem. It was with one of my xposed mods. I had enabled skipping tracks with volume keys. This resulted to neither track changing nor volume control. I suspect it was clashing with my poweramp volume button controls. I disabled that option in wanam xposed and rebooted.. Everything is back to normal!
maniyal said:
Did anyone find a solution? I have the exact same problem!
Click to expand...
Click to collapse
My solution (actually I had another device from Motorola)
was simple to reset my phone
djlucask said:
My solution (actually I had another device from Motorola)
was simple to reset my phone
Click to expand...
Click to collapse
But don't you think it's a pain to reset your phone everytime? I mean isn't data loss and app restoration everytime painful? Or do you mean reboot?
Sent from my GT-I9500 using XDA Free mobile app

Q: Volume acting like it's being pressed?

Hello, a few hours ago my Nexus 7 suddenly started acting as if I was continuously pressing the volume down key. I could not even power down. Thinking I got a nasty software bug, I installed an app from play that let me reboot. It immediately rebooted into recovery though, just as if I had been holding down the volume key while it booted.
I have slimkat installed with twrp v2.7.0.0. I installed a recovery from before the skimkat installation (stock with root and twrp). But it too rebooted into twrp again (as if I was tapping volume down while it rebooted). So I tried to reboot into the bootloader to see what that would do (it allows you to use the volume keys to make selections). I got to the bootloader and sure enough, it was cycling through the options like I was tapping volume down over and over.
Help? Any ideas? I have pulled off the back cover and cleaned around the volume and power keys. It does not appear anything is wrong with them. Is it a software issue? Hardware? Any help would be appreciated.
Ok just one update on this issue. I think this is likely a hardware issue. I managed to disconnect the side key cable for the volume and power keys while it was booting, and it booted up just fine.
I am not sure what is wrong with the keys, but the fact that the tablet will boot into system when they are not attached tells me I probably need to replace them. Just FYI for the unlucky person who might also behaving this problem.
I am also experiencing volume problems. Mine is software related I think. The problem I have is that all volume and sound will disappear as if I have muted all sound. I have no touch sounds, no YouTube sound, no music audio, nothing at all from the speakers or the headphone jack. A reboot will fix it, but after say 10 minutes of use the sound goes again. The volume controls do nothing. Completely stock 4.4.3.
Does anyone else have this issue?

Volume increase not working

Hi,
I am trying to increase the ringer volume using the volume up button but it is not working. Whenever I press the volume up button the volume indicator comes up but remains at zero. Even when I slide the indicator over at higher values the moment I press the volume up button it returns to zero. I restart the phone and the problem seems to go away for a couple of hours and then automatically goes to zero again without me touching it. Anyone else has this issue? Any ideas on how to fix it? The phone stays in vibration mode only and I miss calls because of this.
Thanks.
Strange problem, my volume button seems to work fine and I cannot reproduce the issue. You may have to try a full wipe and reinstall the ROM.
Hi thanks for the reply! I am on the original elephone rom. I only updated through the elephone application, but this issue appear much later!
Perhaps try flashing an older ROM again or try clean install of eragon ROM, if problem persists then maybe it's a hardware issue like a sticky volume switch.
charliepie said:
Perhaps try flashing an older ROM again or try clean install of eragon ROM, if problem persists then maybe it's a hardware issue like a sticky volume switch.
Click to expand...
Click to collapse
I somehow doubt that. As OP said "Whenever I press the volume up button the volume indicator comes up but remains at zero."
For me it sounds more like the switch is working but there is a software problem.
@ OP: Have you tried e.g. to watch a video or listen to music an the higher or lower the volume? Is it working there at least?
I am using a rooted cricket h634 LG stylo 5.1, WITHOUT custom ROM installed, I am also experiencing issues with my volume up button, I have removed bloatware but that is the extent of what I've done so far. My volume wrks if I use the drop down tray, volume down works, but not up.

Issue with Volume down button

This might be the wrong portion of the forum, but I've got the latest Viper rom installed on my 10
I found that my volume down button doesn't affect volume at all, ever. It turns the screen off.
I've even dug through every option, toggled everything on or off testing one thing at a time, and it still does that. Only volume up brings up the volume window. It's obviously rom related, since it doesn't do that on stock (of course it doesn't)
If anyone has any suggestions, or a fix for this, let me know where to look.
Thanks!

Categories

Resources