Facer Troubleshooting - Moto 360

I accidentally changed the face when facer wasn't selected. Now I get a blank watch face. I tried uninstalling and rebooting but nothing is working. Anyone know how to fix this?
Sent from my HTC6525LVW using Tapatalk

Two things to try: make sure the backlight is on and then press and hold the crown button. When the settings menu appears you can select a new face. The second thing to try is then reselect Facer and send one of the presets to it. I have had this happen several times and eventually it pops back up (but I was quite concerned the first time)

OK it fixed itself somehow
Sent from my HTC6525LVW using Tapatalk

This is unrelated to your post, but its an issue im having with facer none the less...
A lot of the zip files i am downloading will not open in facer. I have tried rebooting but they still dont import... any ideas?

tsy87 said:
This is unrelated to your post, but its an issue im having with facer none the less...
A lot of the zip files i am downloading will not open in facer. I have tried rebooting but they still dont import... any ideas?
Click to expand...
Click to collapse
Same here. Bump for help.

tsy87 said:
This is unrelated to your post, but its an issue im having with facer none the less...
A lot of the zip files i am downloading will not open in facer. I have tried rebooting but they still dont import... any ideas?
Click to expand...
Click to collapse
ricardo_r21 said:
Same here. Bump for help.
Click to expand...
Click to collapse
The dev is aware and is working on resolving the issues. What I have found for a temp work around is, rebooting your watch, then selecting another face, waiting few sec, then switching the face back to facer and then pushing your selected face. It takes a few secs, up to 30s on some faces to push, but it will change it. I have had it where facer will crash on the watch, I just repeat said steps above, minus the rebooting and it works.

ricardo_r21 said:
Same here. Bump for help.
Click to expand...
Click to collapse
droidkevlar said:
The dev is aware and is working on resolving the issues. What I have found for a temp work around is, rebooting your watch, then selecting another face, waiting few sec, then switching the face back to facer and then pushing your selected face. It takes a few secs, up to 30s on some faces to push, but it will change it. I have had it where facer will crash on the watch, I just repeat said steps above, minus the rebooting and it works.
Click to expand...
Click to collapse
Okay, actually I figured out what was wrong. A lot of the folders were doulbed, so after extracting, the folder structure was duplicated within that so the app was unable to load the face. if you go in and copy the last 4 files from the base folder, then dump them right in the first folder, it will work. .... if that makes sense, im not really up to all the correct terminology.

Related

SOLVED: Unable to install Amazon Appstore?

I am having a problem installing the Amazon Appstore (and the foxfi installer too now that I think about it). I am able to download the APK and run it but once in the program the install button does nothing. I mean I click on it and there is no error message, no program crash, nothing. It's almost like the install button image isn't a button and I'm clicking on nothing. Clicking cancel or show all for the permissions works fine.
I have enabled install from unknown sources and even tried to disable it and try but nothing works. Has anyone encountered anything like this before? TIA for any help.
EDIT: BTW I'm on stock and not rooted.
SOLVED: Thanks to Zerkai it appears that Screen Filter and Screen Adjuster can prevent APKs from installing.
Try to install these apps with an APK Installer. Like the following.
https://play.google.com/store/apps/...SwyLDEsImNvbS5wb3RlbnRlLmFway5pbnN0YWxsZXIiXQ..
See if that changes anything.
X10D3 said:
install an APK installer app.
https://play.google.com/store/apps/...SwyLDEsImNvbS5wb3RlbnRlLmFway5pbnN0YWxsZXIiXQ..
See if that changes anything.
Click to expand...
Click to collapse
Just tried that and it is exhibiting the same issue. Called amazon and they hadn't heard of it and had no suggestions on how to fix it. They did mention security apps might be able to block installs and that led me to look at my apps. I did have Norton mobile security installed but stopping it and then even uninstalling it didn't get rid of the issue.
This is really starting to frustrate me.
May sound obvious, but have you tried restarting your phone?
If you were rooted I'd recommend clearing your dalvik and /cache.
One thing you may try is cleaning up your SD card.. Even try renaming the android folder on your sd card. It holds app data for diff apps. you system will recreate it. just delete the recreated on and change the name back after you've tested it.
The only other option (that comes to mind) is a factory reset. I would try the other stuff first. Something is corrupt somewhere.
By any chance are you using, Screen Filter?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
X10D3 said:
May sound obvious, but have you tried restarting your phone?
If you were rooted I'd recommend clearing your dalvik and /cache.
One thing you may try is cleaning up your SD card.. Even try renaming the android folder on your sd card. It holds app data for diff apps. you system will recreate it. just delete the recreated on and change the name back after you've tested it.
The only other option (that comes to mind) is a factory reset. I would try the other stuff first. Something is corrupt somewhere.
Click to expand...
Click to collapse
I did try rebooting. anything ever goes wrong with any electronic device of mine and it's the first thing I try.
zerkai said:
By any chance are you using, Screen Filter?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
I am not, but I did have screen adjuster installed and figured whatever screen filter was doing might be done by screen adjuster. So I uninstalled and guess what it worked now. Thanks a lot Zerkai, you the man.
But wtf would screen filter do that could cause this?
Beats me. Lol. I was baffled when I figured out Screen Filter was the cause. But all is well as long as it's not active. Have a good day!
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Old thread. Yes, I know. Came across this thread trying to fix the same issue. The app causing the issue for me was JuiceDefender. I think JD controlling the screen's brightness level was the issue. Anyway, I disabled JD and I was able to access the button.
SG3 SGH-T999 Stop Installing third party APK's SOLVED! is REAL
erikk said:
I am having a problem installing the Amazon Appstore (and the foxfi installer too now that I think about it). I am able to download the APK and run it but once in the program the install button does nothing. I mean I click on it and there is no error message, no program crash, nothing. It's almost like the install button image isn't a button and I'm clicking on nothing. Clicking cancel or show all for the permissions works fine.
I have enabled install from unknown sources and even tried to disable it and try but nothing works. Has anyone encountered anything like this before? TIA for any help.
EDIT: BTW I'm on stock and not rooted.
SOLVED: Thanks to Zerkai it appears that Screen Filter and Screen Adjuster can prevent APKs from installing.
Click to expand...
Click to collapse
BUMP THANKS SO MUCH! I posted videos of my problem on you tube and Facebook etc! this was it my Official solution you have helped relieved me from this terrible Situation! Hi5 forever dude!
Justin Cram
DyingJedi
Tapdeck
Sorry to bump, but we can add Tapdeck to the list of apps that cause this problem. It's a live wallpaper.

Phone goes into Do Not Disturb mode on its own

I'm having issues, my phone goes into "Do Not Disturb" mode on it's own. I think it has something to do with the Android wear connection to my watch. I've reset the watch and checked to make sure it isn't set to turn on that mode. But still at random times my phone goes quiet. Curious to hear if anyone has had the same issue or a cure. Thanks!
yes i have the same issue with pixel xl & Huawei watch 🤔
Sent from my Pixel XL using XDA-Developers mobile app
I have the same issue as well. It also happens on calls.
It's a new feature in 7.1.1
You have to disable the automatic rules that are created in settings. I just deleted all the premade ones in there and my issue went away.
sassmk2 said:
You have to disable the automatic rules that are created in settings. I just deleted all the premade ones in there and my issue went away.
Click to expand...
Click to collapse
I have an Android Wear watch and have the same problem. Are you saying the deleting the built-in Weekend, Weeknight, and Event rules fixed it for you?
JimSmith94 said:
I have an Android Wear watch and have the same problem. Are you saying the deleting the built-in Weekend, Weeknight, and Event rules fixed it for you?
Click to expand...
Click to collapse
Yes, Fixed it for me
sassmk2 said:
Yes, Fixed it for me
Click to expand...
Click to collapse
Thanks, I just deleted mine, so we'll see if it helps me.
JimSmith94 said:
Thanks, I just deleted mine, so we'll see if it helps me.
Click to expand...
Click to collapse
I have done this too and my phone goes into DnD mode when I make or take phone calls. It becomes an issue when I get off the phone about 50% of the time it stays in DnD mode and I have to manually turn DnD mode off. Anyone found a work around for this yet?
I posted this to fix it. Its a hidden menu https://forum.xda-developers.com/pixel-xl/how-to/how-to-off-disturb-section-using-volume-t3598695
Has anyone solved this? My Pixel XL keeps turning DND on when I've manually turned it off. I do not use a smart watch or any other accessory. And I have already deleted the single Automatic Rule which I programmed (my phone didn't come with any pre-installed rules). I'm a doctor and keep missing super-important phone calls because my phone isn't ringing. (It's sitting in a cradle on my desk, charging -- so I know I'm not accidentally hitting the volume down button.)
Thanks!
Fitz
itfitz01 said:
Has anyone solved this? My Pixel XL keeps turning DND on when I've manually turned it off. I do not use a smart watch or any other accessory. And I have already deleted the single Automatic Rule which I programmed (my phone didn't come with any pre-installed rules). I'm a doctor and keep missing super-important phone calls because my phone isn't ringing. (It's sitting in a cradle on my desk, charging -- so I know I'm not accidentally hitting the volume down button.)
Thanks!
Fitz
Click to expand...
Click to collapse
The only sure fire way, if you're sure it's not an app you installed or setting you set, is to factory reset including wiping system OR flashing stock via fastboot. I mean technically if you had the time and you didn't wanna do all that you could boot the phone into safe mode, then wait and see if it does the same thing. If it doesn't , you know it's an app you have installed.

Watch not receiving notifications.

Anyone else having this problem. It's only just happened. I've unpaired, uninstalled software, done everything I can think of. My phone is connected to it but when I get a message etc it doesn't come up on my watch.
Update
Charlie3999 said:
Anyone else having this problem. It's only just happened. I've unpaired, uninstalled software, done everything I can think of. My phone is connected to it but when I get a message etc it doesn't come up on my watch.
Click to expand...
Click to collapse
I've factory reset my phone and watch. Still not working. A phone call comes up on my watch so it must be a setting I can't work out.
Mine was working yesterday on a stock rooted rom on my phone, but not today on a modified rom. What are you running?
Charlie3999 said:
Anyone else having this problem. It's only just happened. I've unpaired, uninstalled software, done everything I can think of. My phone is connected to it but when I get a message etc it doesn't come up on my watch.
Click to expand...
Click to collapse
Hi,
I also had issues and did not recieve messages on my watch... (see: https://forum.xda-developers.com/huawei-watch/help/messages-arriving-watch-t3510071)
Did your recently reset your phone to factory settings?
Because the new version of Android Wear is asking for permissions to recieve notifications.
I did everything but the solution was simple for me:
Open the Android Wear app and on startup page there should be a blue notification which says something like klick here to enable notifications...klick this button and allow the notification permission and everything should work fine now.
htcdesire-hd said:
Hi,
I also had issues and did not recieve messages on my watch... (see: https://forum.xda-developers.com/huawei-watch/help/messages-arriving-watch-t3510071)
Did your recently reset your phone to factory settings?
Because the new version of Android Wear is asking for permissions to recieve notifications.
I did everything but the solution was simple for me:
Open the Android Wear app and on startup page there should be a blue notification which says something like klick here to enable notifications...klick this button and allow the notification permission and everything should work fine now.
Click to expand...
Click to collapse
Can you post a picture of where you mean. I can't seem to see where you're talking about.
Charlie3999 said:
Can you post a picture of where you mean. I can't seem to see where you're talking about.
Click to expand...
Click to collapse
I meant this notification with the label "Turn on watch notifications". (see attachment)
Charlie3999 said:
Can you post a picture of where you mean. I can't seem to see where you're talking about.
Click to expand...
Click to collapse
htcdesire-hd said:
I meant this notification with the label "Turn on watch notifications". (see attachment)
Click to expand...
Click to collapse
You can also access that in Settings > Apps > Gear Icon (upper right) > Advanced / Special Access > Notification access, then toggle on the Android Wear if it is not on
Thanks a bunch... I went to the app and noticed it said not connected... Touch to reconnect... Had to do that 4x and it finally connected
htcdesire-hd said:
Hi,
I also had issues and did not recieve messages on my watch... (see: https://forum.xda-developers.com/huawei-watch/help/messages-arriving-watch-t3510071)
Did your recently reset your phone to factory settings?
Because the new version of Android Wear is asking for permissions to recieve notifications.
I did everything but the solution was simple for me:
Open the Android Wear app and on startup page there should be a blue notification which says something like klick here to enable notifications...klick this button and allow the notification permission and everything should work fine now.
Click to expand...
Click to collapse
I'm having the same problem only I've done all of the above and it's still not working.
Notifications work for everything except messages and gmail.
It's only been doing it since the watch updated to Android Wear 2.5.
I have reset both the phone and the watch to factory, deleted and reinstalled the apps and still nothing.
bjm374 said:
I'm having the same problem only I've done all of the above and it's still not working.
Notifications work for everything except messages and gmail.
It's only been doing it since the watch updated to Android Wear 2.5.
I have reset both the phone and the watch to factory, deleted and reinstalled the apps and still nothing.
Click to expand...
Click to collapse
Same here after OTA update to 2.5 I can't receive notifications on my watch anymore..had to reset my phone and watch but still not working.
I wonder if there's a way to roll back to 2.0???
bjm374 said:
I wonder if there's a way to roll back to 2.0???
Click to expand...
Click to collapse
I don't know but I wish there was an easy way to go back to 2.0.
Hopefully someone far smarter than me will see this and tell us how easy it is ?
try to "sync all apps" again with the android wear app.. then shut down and restart the watch. This works until I rebooted my phone, then I had to do it again
bjm374 said:
Hopefully someone far smarter than me will see this and tell us how easy it is
Click to expand...
Click to collapse
It's obvious now that the current Android Wear app on the phone needs to be updated to become compatible with the 2.5.
My workaround to this issue was, which I've tested many times and worked so far, finger crossed!:
1-Turn the watch off
2-Turn the Bluetooth off on the phone
3-Turn the watch on completely
4-Turn on the Bluetooth on the phone.
The first notification will take 3-4 seconds to arrive.
Excellent effort. So far that seems to be working for me. I haven't received any messages yet but I'm getting my email notifications (which I wasn't before).
Thank You
hagba said:
It's obvious now that the current Android Wear app on the phone needs to be updated to become compatible with the 2.5.
My workaround to this issue was, which I've tested many times and worked so far, finger crossed!:
1-Turn the watch off
2-Turn the Bluetooth off on the phone
3-Turn the watch on completely
4-Turn on the Bluetooth on the phone.
The first notification will take 3-4 seconds to arrive.
Click to expand...
Click to collapse
That worked for me, thanks.
Oddly enough though, I followed the instructions step by step and actually had a facebook notification pop up on the watch immediately after it powered up but before I'd turned bluetooth back on on the phone!
@hagba Thank you very much those step work. I also noticed that google assistant doesn't work when you send your first query. You have to ask it something, click on the little colored dots then ask it the same thing again and it works. You have to do this everytime you make any request. Annoying. I hope the knuckleheads at Google will fix these annoying issues soon.
snapperheadjoe said:
@hagba Thank you very much those step work. I also noticed that google assistant doesn't work when you send your first query. You have to ask it something, click on the little colored dots then ask it the same thing again and it works. You have to do this everytime you make any request. Annoying. I hope the knuckleheads at Google will fix these annoying issues soon.
Click to expand...
Click to collapse
Myself I have no such problem with the Google assistant, it works fine from the first voice command without touching the colored dots, even "Ok Google" works well.
hagba said:
It's obvious now that the current Android Wear app on the phone needs to be updated to become compatible with the 2.5.
My workaround to this issue was, which I've tested many times and worked so far, finger crossed!:
1-Turn the watch off
2-Turn the Bluetooth off on the phone
3-Turn the watch on completely
4-Turn on the Bluetooth on the phone.
The first notification will take 3-4 seconds to arrive.
Click to expand...
Click to collapse
Worked for me, too. Got a message notification before I turned the Bluetooth back on, lol:good:

Can't press 'Install' when installing an APK

Good evening, just lately I have encountered a bug when trying to install APK's. When I go to install via Package Installer it will open up the screen and when I go to press next it doesn't do anything, I have tried rotating the screen and pressing Next and it just doesn't work whatsoever...
I powered off my device and powered back on and this seemed like it fixed the problem.
Is/has anyone else encountered this? I've also noticed ometimes when typing on the keyboard the sound goes tinny for 5 seconds or so and go back to normal, it's been like this since unboxing too.
I haven't had this issue exactly, but when I install a new app and it asks for permission to access my location/storage/etc.. I can't press Allow.. I can press Deny though no problem at all. Right now I'm manually going into apps/permissions and granting all my apps whatever I think it needs.. Just a pain to do it that way though!
I had this issue the other night. It seems an invisible overlay gets stuck sometimes. Not sure what app or why, but clearing all the recent apps fixed it for me. Try that if it happens again instead of waiting for the phone to restart.
Sent from my G3223
Also had this problem two days ago and restarting seemed to fix it. I was disabling some of the stock apps at the time so I wondered if that had something to do with it but I don't know, don't think I re-enabled any of the apps or anything before or after the reboot and so far it's been working since.
mikeandjaimie said:
I haven't had this issue exactly, but when I install a new app and it asks for permission to access my location/storage/etc.. I can't press Allow.. I can press Deny though no problem at all. Right now I'm manually going into apps/permissions and granting all my apps whatever I think it needs.. Just a pain to do it that way though!
Click to expand...
Click to collapse
Thanks for your feedback and I have also had that problem too. Of course yes we can go into app settings and enable and like you stated it's a pain haha. I know this isn't the place to point these problems out and get them fixed but it's nice to know I'm not the only one ??
redincali said:
I had this issue the other night. It seems an invisible overlay gets stuck sometimes. Not sure what app or why, but clearing all the recent apps fixed it for me. Try that if it happens again instead of waiting for the phone to restart.
Click to expand...
Click to collapse
Yes dude, that's correct and thanks for that valuable information I do clean my cache regularly and can't say I've come across the problem for a while, so thanks again.
exonym said:
Also had this problem two days ago and restarting seemed to fix it. I was disabling some of the stock apps at the time so I wondered if that had something to do with it but I don't know, don't think I re-enabled any of the apps or anything before or after the reboot and so far it's been working since.
Click to expand...
Click to collapse
I'd like to mention I have disabled and uninstalled quite a lot too, but I can't say if this adds to the problem. It'd just be really nice to hopefully get the new build of software that was recently announced on Xperia Blog but I can't say if this will fix the problems etc. I don't know? ??
Sent from my Sony Xperia XA1 Ultra using XDA Labs
LevsOG said:
Good evening, just lately I have encountered a bug when trying to install APK's. When I go to install via Package Installer it will open up the screen and when I go to press next it doesn't do anything, I have tried rotating the screen and pressing Next and it just doesn't work whatsoever...
I powered off my device and powered back on and this seemed like it fixed the problem.
Is/has anyone else encountered this? I've also noticed ometimes when typing on the keyboard the sound goes tinny for 5 seconds or so and go back to normal, it's been like this since unboxing too.
Click to expand...
Click to collapse
I've experienced this issue as well and the culprit seemed to be an overlay permission from another app. As I'm sure everyone knows, this phone's screen is very bright even at it's lowest setting. I like to read at night and the light bothers my wife so I started using an app called Nightowl that further dims the screen. Nightowl produces a overlay that dims the entire screen. If i happen to be running nightowl and try to install the app, I can't tap install. Once I turn off the app I'm able to install like normal. Hope that helps lead you in the right direction as restarting the phone every time a problem presents itself is kind of a bummer.

Display randomly turns on

SOLVED. See my last post.
No notification or anything. It turned on with Benzo rom and now I am on fresh stock with a custom kernel and it still turns on. How do I monitor the device to determine what might be causing it to turn on? It started with March update. I didn't have this issue on the January update.
Is there an app I can install to see what turns the display on or is this something I must do on a pc?
b4u2 said:
No notification or anything. It turned on with Benzo rom and now I am on fresh stock with a custom kernel and it still turns on. How do I monitor the device to determine what might be causing it to turn on? It started with March update. I didn't have this issue on the January update.
Is there an app I can install to see what turns the display on or is this something I must do on a pc?
Click to expand...
Click to collapse
Which custom kernel? And try safemode to see if problem still persists. If safemode fixes it it is an app
shagbag913 said:
Which custom kernel? And try safemode to see if problem still persists. If safemode fixes it it is an app
Click to expand...
Click to collapse
I'm using Holy dragon Kernel.
I put the device in Safe Mode for most of the day and never saw the display turn on like before. So it must be an app. How would I go about narrowing down which app is causing the problem?
b4u2 said:
I'm using Holy dragon Kernel.
I put the device in Safe Mode for most of the day and never saw the display turn on like before. So it must be an app. How would I go about narrowing down which app is causing the problem?
Click to expand...
Click to collapse
If you could get a logcat I might be able to go through it for you.
shagbag913 said:
If you could get a logcat I might be able to go through it for you.
Click to expand...
Click to collapse
Would that be an app or by using ADB?
b4u2 said:
Would that be an app or by using ADB?
Click to expand...
Click to collapse
To grab logs you can use either just make sure if you use an app you grant it root permissions
Here are two screenshots I took after the screen turned on with no notifications present. I have no clue what to look for. Hopefully this helps. Is the whole log needed? I turn Matlog on and then turn the screen off until the "error" happens. Then I turn screen on and do the screenshot.
b4u2 said:
Here are two screenshots I took after the screen turned on with no notifications present. I have no clue what to look for. Hopefully this helps. Is the whole log needed? I turn Matlog on and then turn the screen off until the "error" happens. Then I turn screen on and do the screenshot.
Click to expand...
Click to collapse
That is exactly what you should've done. I will have a look and maybe we can find the problem. A list of your apps would make it quite a bit easier too
Here are some more that hopefully caught whatever is happening.
b4u2 said:
Here are some more that hopefully caught whatever is happening.
Click to expand...
Click to collapse
Do you have an app like an image downloader? Also does campmobile sound familiar?
shagbag913 said:
Do you have an app like an image downloader? Also does campmobile sound familiar?
Click to expand...
Click to collapse
I have Avairy, Collage maker, Image editor, Layout, Snapseed? No clue what campmobile is.
I uninstalled a bunch of apps that I don't use on a daily basis. I removed all of the above plus Verizon message, Allo, Duo, Tapatalk, Forest river forums, NFL mobile, NFL network, ESPN, and maybe a few others Display still randomly turns on.
This is so annoying that I can't figure out what keeps turning the display on.
Are you using any custom kernel settings that don't get set in safemode? Set on boot etc..
DR3W5K1 said:
Are you using any custom kernel settings that don't get set in safemode? Set on boot etc..
Click to expand...
Click to collapse
Honestly not sure. I just use the settings that come with the kernel.
We'll that could potentially be the problem. Try it with the stock kernel for testing?
DR3W5K1 said:
We'll that could potentially be the problem. Try it with the stock kernel for testing?
Click to expand...
Click to collapse
So just flash the stock zip on slot B?
b4u2 said:
So just flash the stock zip on slot B?
Click to expand...
Click to collapse
The best way to try it without losing anything imo.
Just "fastboot flash-all.bat" after you open the .bat and editing out the "-w".
DR3W5K1 said:
The best way to try it without losing anything imo.
Just "fastboot flash-all.bat" after you open the .bat and editing out the "-w".
Click to expand...
Click to collapse
I just did that and will now wait to see what happens.
Update: Display still turns on what's my next step?
Well that sums it up only a factory reset to try now.
If it still persist then your phone is fubar.
DR3W5K1 said:
Well that sums it up only a factory reset to try now.
If it still persist then your phone is fubar.
Click to expand...
Click to collapse
I did a full wipe last night. So far so good but it's early yet.
Four hours and still no sign of display randomly turning on. I installed magisk and my custom kernel. So far I only turned on/logged into apps I needed right now.

Categories

Resources