Related
Sent from my PC36100 using XDA App
http://forum.xda-developers.com/forumdisplay.php?f=652
I've had my phone overclocked 15% for months now...I pre-ordered and picked it up on June 4th (the day they were released to the public) and it's never been replaced. I rooted it right away using the engineering hboot method, and I immediately went to a rooted stock rom with a kernel that'd allow overclocking the very first time I saw one posted on this forum. I've never been able to run it at anything higher than 1152 mhz, but I've also never had any stability issues at 1152 mhz. I also allow it to go as low as 128 mhz all the time.
Since then I've played with various roms, and various kernels, but the first thing I've done when changing any rom or kernel, is always set the min and max CPU speeds again, and decide which governor to use. I've also always played with the undervolting strategies, from static to HAVS, and I've always been able to get away with the most agressive stuff posted without any stability issues.
Your mileage may vary, but thats been my experience with an overclocked Evo. I will admit I can barely notice the performance difference from 998 mhz to 1152 mhz, but I actually notice a battery life improvement...get it done faster so the CPU can go back to idling at a low frequency as soon as possible mentality I guess.
please watch what you say here. its not going to get you any help to curse and swear at other members. last warning
@MikeOD, which governor and what governor parameters have you found to work best for you?
I think the whole overclock boils down to what you do with your phone. If nothing overly cpu intensive, then there's likely to be little gain in the amount of saved time.
I actually have mine under clocked at 921 Mhz (came that way in the rom initially). UI was fluid enough and everything still seemed to work well/responsive. I get slightly better battery life too. Noticeable in the rate the batt % declines during active tasks (web browsing).
ive only been rooted a day but can someone give me some advice on cpu speeds. assuming if i turn it up it will drain battery much quicker but whats a good speed to go for running cm7.
The stock HTC rom sets CPU speed to 1Ghz. So if you think your DHD was not fast enough, overclocking (i.e. moving the upper CPU frequency beyond 1Ghz) is a good option. Users here set the upper limit to either 1.2G, 1.3G, or 1.4G. 1.5G and above are not usually recommended because you may experence system hangs or reboot.
Overclocking not necessarily means larger battery consumption. Currrent custom kernels all use lower-than-stock voltages so the energy consumption is lower than that of stock. And the time CPU stays on the above-1G state in fact is not that much. You shouldn't worry about this.
ywliu
If you are satisfied with the original 1Ghz speed, and battery is your concern. You can lower the upper value to 800MHz or so to prolong battery use.
Also, CPU governor is another key issue. Choosing either Smartass/Smartass2, or On Demand usually is a safe bet.
great, thanks. i'll have a little play with the speeds and see what works. dont suppose you know if you can store more than one backup rom with rom manager/clockworkmod can you?
rhodri11 said:
great, thanks. i'll have a little play with the speeds and see what works. dont suppose you know if you can store more than one backup rom with rom manager/clockworkmod can you?
Click to expand...
Click to collapse
You can only backup Roms with cwm But you could keep the flashable zips. But that would mean a fresh install each time. Titanium backup maybe could help.
Sent from my HTC Desire HD using XDA Premium App
Is there any way to really monitor what's going on with my CPU?
I've installed SetCPU and checked my CPU limits, but it just doesn't feel to be changed. I've seen some posts about CPU figures just changing as figures, but the actual frequency remaining unchanged.
I have recently rooted my dhd and currently running CM7. Using the cpu setting within the performance menu I am wondering what peoples thoughts are on a noticeable but safe increase of cpu speed. its set as 1017MHz which i believe is default. I am told I can run anything up to 1500 safely. can anyone confirm this and also tell me what kind of result (performance and battery life) i should expect.
thanks
Well, I use Android Revolution HD (a sense rom, meaning heavy UI!) and i overclock to about 1.3GHz. In terms of battery life when it's awake, it seems a drain a teeny bit more readily, but I've never had a freeze on sense (quite rare)
On stock it underclocks to let the processor max at around 400MHz when the screens off, so that helps to really save a lot of battery on standby. On CM, I'd expect it'd feel more or less the same in terms of performance after you hit 1.2/1.3GHz
hmohammed43 said:
Well, I use Android Revolution HD (a sense rom, meaning heavy UI!) and i overclock to about 1.3GHz. In terms of battery life when it's awake, it seems a drain a teeny bit more readily, but I've never had a freeze on sense (quite rare)
On stock it underclocks to let the processor max at around 400MHz when the screens off, so that helps to really save a lot of battery on standby. On CM, I'd expect it'd feel more or less the same in terms of performance after you hit 1.2/1.3GHz
Click to expand...
Click to collapse
thanks for the reply mate. going to try out revolution HD soon i think. have you overclocked using a third party app or is there one built into that rom?
also im a little confused by the governors. 'on demand' is the default governor. Does that mean it will only use the max selected cpu speed when necessary? would you recommend using a difference setting?
cheers
rhodri11 said:
thanks for the reply mate. going to try out revolution HD soon i think. have you overclocked using a third party app or is there one built into that rom?
also im a little confused by the governors. 'on demand' is the default governor. Does that mean it will only use the max selected cpu speed when necessary? would you recommend using a difference setting?
cheers
Click to expand...
Click to collapse
The CPU is managed by the ROM itself. You can tweak it yourself by using setCPU (or similar), but I can advise you not to. Can't help you with the governors buddy, since I dunno what it is
Cheers
darude0306 said:
The CPU is managed by the ROM itself. You can tweak it yourself by using setCPU (or similar), but I can advise you not to. Can't help you with the governors buddy, since I dunno what it is
Cheers
Click to expand...
Click to collapse
nice one dude
I'm running cm7 and I'm overclocked to 1.5 ghz. It's been totally fine for months.
Sent from my Motorola Startac running Atari 2600 software!
rhodri11 said:
thanks for the reply mate. going to try out revolution HD soon i think. have you overclocked using a third party app or is there one built into that rom?
also im a little confused by the governors. 'on demand' is the default governor. Does that mean it will only use the max selected cpu speed when necessary? would you recommend using a difference setting?
cheers
Click to expand...
Click to collapse
Lucky you picked a linuxhead!
The system itself has a daemon (background process built into the system) that handles overclocking. It's all explained on the page and also on this thread:
http://forum.xda-developers.com/showpost.php?p=14638641&postcount=34279
You can use another app (like SetCPU) but the daemon usually handles screen off's quicker. The governors basically determine how the processor frequency is changed. I'll explain the common ones:
Performance - Runs at highest speed, so if you have a range of 200 to 1.3G, it'll stay at 1.3G all the time, not usually the best
Ondemand - The universal default for phone overclocking, it only changes the speed up after a certain percentage of the CPU is used, and it switches on the fly, so if the CPU is used too much at 400MHz, it'll ramp it up to maybe 600 or 800, and if it's still overused, it'll put it up to maybe 1 or 1.2G
Conservative - This is like ondemand, except it makes the changes more gradual. It can give noticable lags in the foreground at times, so this is mainly used when the phone is asleep (screen off)
Smartass - This governor is like ondemand, except it'll less readily switch frequencies to higher values when it detects the screen off. This isn't really used because the overclocking daemons take into account the phone being awake or not
Basically, there isn't really a need to change governors, only really frequencies if anything. The thread, however, does tell you how to change governors.
Im using latest LeeDroid GB 3.2.1 and to be honest with the work he's done with the Kernal (3.1.8BFS) I have found that the ROM is a lot MORE responsive without me overclocking the CPU.
Im not really sure how it all works, but I guess doing this on different ROMS has its own different out comes.
overclocking has me confused too, is there really that much of a benefit in it? how much will i gain from it?
toby_lerone said:
overclocking has me confused too, is there really that much of a benefit in it? how much will i gain from it?
Click to expand...
Click to collapse
There is a benefit when you use certain apps, or even sense itself. For example, I've never had sense ui freeze, or go slow. The under clocking helps to improve the rubbish battery life when your phone is asleep.
In terms of measuring the gain, I have no idea. Really, I'd think you could use a process heavy app, or benchmarking app and see.
There's also loads of guides on overclocking to help out! (that's how I got the hang of it! )
Sent from my Desire HD using XDA Premium App
For the need on OC, it depends on the kind of apps u're using. If u're happy w a non OC DHD, its totally up to u.
But for the UC, it works as a terrific battery saver, mich better/effective than other battery saver soln on market
The safe range depends on the DHD as the manufacturing changed even though same part, i'm OC 1.5GHz "On Demand" profile and under clock 245MHz on screen off "Power Save" profile.
Getting approx a day usage on Lee 2.1.
I have a og evo I want to know why when I overclock to 1.2ghz it freezes my phone why does it do that ?
Sent from my Nocturnal 4G using xda premium
Each Evo is different. Some of them can't handle that high overclock, or can't be undervolted very low. Each one is different, each has its limits.
I don't understand the big deal with overclocking. It burns your battery faster. I personally underclock, with little to no lag and is good enough for my casual gaming needs
Mine doesn't like a clock much at all. I can get about 1.1 before it starts locking up but even then it hangs a lot. I honestly don't see a difference from 1.0 to 1.2. Get a decent rom, good kernel and try out the v6 script an I almost guarantee you will like that better.
beaumontcali48 said:
I have a og evo I want to know why when I overclock to 1.2ghz it freezes my phone why does it do that ?
Sent from my Nocturnal 4G using xda premium
Click to expand...
Click to collapse
Well for us to be able to help you, you would need to provide us with more details on how you are trying to accomplish this.
I use no frils cpu but have also tried setcpu and viperMOD I know that's the best way to overclock but is very confusing. Have any step by step instructions to of to 1.2 I know having higher voltages helps as well.
Sent from my Nocturnal 4G using xda premium
Sent from my Nocturnal 4G using xda premium
Overclocking is overrated. If you need to overclock for every day usage, then something is wrong - at least in my opinion. Resource intensive gaming is different, but you shouldn't need to overclock for browsing, texting, casual games, etc.
Try out the V6 Supercharger script. I'm not currently using it, but have in the past and it seemed to make my phone more snappy. A lot of people swear by it and it's a great script, definitely worth a shot. There are other things you can do to speed up your phone without overclocking. I'd try other options first since overclocking will chew through your battery. Increase the dalvik vm heap size, there are plenty of free apps on the market to help with this task. Uninstall apps you don't use, I'll bet that you never use some of the apps on your phone. Back them up with Titanium Backup and you can restore them if you ever need them again.
In case you didn't already know, the Evo can't overclock past 1.2, I'm not 100% sure why - it has something to do with the processor.
Supersonic Evo 4G | MIUI | Tapatalk
I never oc over 1075 and only when plugged in if i play a game I need to oc.for I just activate my charging profile and plug up and play 1.2 ghz is a good chance of doing serious.damage as these older scorpion processors get very very hot at that clock speed so they lock up to try and protect themselves from heat damage or they shut down the phone 1075 is as high as you should need to go for any games the evo can handle on the subpar gpu
Sent from my Classic-EViLizED-ToMAToFiED-EVo4g-
beaumontcali48 said:
...also tried setcpu and viperMOD I know that's the best way to overclock.
..
Click to expand...
Click to collapse
I'm pretty sure viperMOD is more for undervolting than overclocking, which are not suppose to be combined together. I am running vipermod with max voltages - 50. Other nite was playing snes9x and was getting some lag with a game so I bumped max CPU up to 1.2. Phone went into a bootloop and had to superwipe and reflash everything. Don't know if its b/c vipermod + 1.2 CPU or just bumping up CPU. Didn't try it again.
Support TrevE!!
shift
Get a shift. Mine runs fine at 1.9. But usually run it art 254-1200 on demand.
{ParanoiA} said:
I'm pretty sure viperMOD is more for undervolting than overclocking, which are not suppose to be combined together. I am running vipermod with max voltages - 50. Other nite was playing snes9x and was getting some lag with a game so I bumped max CPU up to 1.2. Phone went into a bootloop and had to superwipe and reflash everything. Don't know if its b/c vipermod + 1.2 CPU or just bumping up CPU. Didn't try it again.
Support TrevE!!
Click to expand...
Click to collapse
You can overclock and undervolt together just fine. You just need to ensure that every frequency has a high enough voltage to run the processor at that step. My Evo is overclocked and undervolted just fine, although IIRC I can only push it up to 1.1 GHz . My tablet is 1ghz to 1.6ghz and is undervolted as well, though.
merge rls 2.0, iron monkey, Droid overclock because of the profiles options. I set up four profiles including one for temp. sometimes i'm underclocking and sometimes overclocking but only up to 1.19 to prevent freeze and boot loops. Only downside is right at open Droid overclock needs su permission but that is my choice since profile changes at open.
Very snappy afterwards.
Sent from my PC36100 using XDA Premium App
When I had the 4G, I was never able to go above 1118, or somewhere around that. It would have freezing issues.
On my evo shift, I was able to do 1.7 gHz (compared to stock 800 mhz) ok. 1.6 pretty reliabily, and I could run 1.5 all day long. Some guys could do 1.9. It just depends on the phone.
Actually overclocking and undervolting is counter-productive. What you should do, is read carhaulers and ropodopes guide over at vaelepak. Its give some good useful info about how to set up a good aosp rom. I'm underclocked, undervolted, and still getting 1400+ benchmarks. Check it out bro. You'll love the results.
Sent from my PC36100 using xda premium
tommy0823 said:
Actually overclocking and undervolting is counter-productive. What you should do, is read carhaulers and ropodopes guide over at vaelepak. Its give some good useful info about how to set up a good aosp rom. I'm underclocked, undervolted, and still getting 1400+ benchmarks. Check it out bro. You'll love the results.
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
Shoot the brutha a link
TrevE Supporter!
tommy0823 said:
Actually overclocking and undervolting is counter-productive. What you should do, is read carhaulers and ropodopes guide over at vaelepak. Its give some good useful info about how to set up a good aosp rom. I'm underclocked, undervolted, and still getting 1400+ benchmarks. Check it out bro. You'll love the results.
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
What? Overclocking and undervolting are two completely different things, and they aren't mutually exclusive. Unless you can provide a good reason as to why it's counter productive to do both, I don't buy that at all. Just checked my phone, my overclock requires an extra 25 mV for all three steps I've overclocked. 25mV isnt much, and it certainly isn't going to kill my battery that much faster.
Besides, the only time the CPU is going to be entering these high power modes is when it needs to do work, and it's better to do work as fast as possible to go back to sleep. Would you rather wake up, do a mundane task for 5 minutes, then go back to sleep or wake up, do a task at 2x the speed while only consuming 30-50% more energy, then going back to sleep after only 2.5 minutes?
HUGI is real.
Sent from my Transformer TF101
Yea shot me the link too bro.
Sent from my PC36100 using xda premium
First let me say I don't use viper mod or any voltage controlling mod.
On sense 3.0 roms such as mikg I over clock to 1152 and set the minimum to 384 and its smooth as butter. No problem and battery lasts all day.
On aosp however such as decks (I'm on it now) I underclock to 499 and leave the min at 254. Smooth as always and battery lasts forever.
Anything past 1152 is going to cause problems (at least in my experience) also the rom/kernel can effect how much you can overclock.
Sent from my PC36100 using xda premium
Gary13579 said:
What? Overclocking and undervolting are two completely different things, and they aren't mutually exclusive. Unless you can provide a good reason as to why it's counter productive to do both, I don't buy that at all. Just checked my phone, my overclock requires an extra 25 mV for all three steps I've overclocked. 25mV isnt much, and it certainly isn't going to kill my battery that much faster.
Besides, the only time the CPU is going to be entering these high power modes is when it needs to do work, and it's better to do work as fast as possible to go back to sleep. Would you rather wake up, do a mundane task for 5 minutes, then go back to sleep or wake up, do a task at 2x the speed while only consuming 30-50% more energy, then going back to sleep after only 2.5 minutes?
HUGI is real.
Sent from my Transformer TF101
Click to expand...
Click to collapse
Its counter productive because it is giving less to something that needs more. (Don't take this post as me trying to be a ****. Just voicing how someone explained it to me a while ago)
Think of this as cars.
Lets say you have a nice fancy v8 mustang. Stock, everything is well, balanced.
If you start adding parts and get it pushing out 1000 horsepower (overclock) your most likely gonna need more feul (voltage) or at least stock amount flowing into the engine just to keep it running.
Now lets say you got that same 1000 horsepower gas destroying mustang and you start to lower the amount of gas flowing into the engine (undervolt (done in vipermod)) cylinders (CPU) wont get enough gas, it wont work, and your stuck going no where.
So if that made sense (did to me) then you can see why they are counter productive. Unless your using vipermod to overvolt (which idk if you can since I don't use it) then you can disregard this whole post
Sent from my PC36100 using xda premium
Your car analogy is completely irrelevant. You can look up the exact voltages that the CPU runs on at every frequency, *even when overclocking*. Overclocking an Evo 1ghz to 1.2ghz takes maybe a 5% bump in voltage, and that 5% extra power is only going to be used *when the CPU is running at max speed* (which is only when there is a lot of work to do), and even then, it's *still better to let the CPU run at max speed with a tiny bit more power consumption than to cap the CPU at a slower speed and make it work for even longer*. Intel calls it HUGI, Hurry Up and Get Idle.
I know what I'm talking about, and I wish people would stop trying to argue with me based off of second hand speculation. I do this for a living, after all. There is absolutely nothing wrong with overclocking and undervolting, and it's the best way to get the most battery life *and* performance out of your phone, period.
Sent from my Transformer TF101
Gary13579 said:
Your car analogy is completely irrelevant. You can look up the exact voltages that the CPU runs on at every frequency, *even when overclocking*. Overclocking an Evo 1ghz to 1.2ghz takes maybe a 5% bump in voltage, and that 5% extra power is only going to be used *when the CPU is running at max speed* (which is only when there is a lot of work to do), and even then, it's *still better to let the CPU run at max speed with a tiny bit more power consumption than to cap the CPU at a slower speed and make it work for even longer*. Intel calls it HUGI, Hurry Up and Get Idle.
I know what I'm talking about, and I wish people would stop trying to argue with me based off of second hand speculation. I do this for a living, after all. There is absolutely nothing wrong with overclocking and undervolting, and it's the best way to get the most battery life *and* performance out of your phone, period.
Sent from my Transformer TF101
Click to expand...
Click to collapse
Hmm, *interesting*. I believe the best answer to the OP was covered rather well earlier. It's all about your rom/kernel/hardware combination. With all the variables to consider as relevant, your best bet is to experiment and find what works for your device. Don't check set on boot untill you are confident the set-up is stable. Higher is not always better with overclocking. My device runs blazingly well underclocked @768max. Gets insanely great battery @499max. However my quadrants are better @ 1036 than at 1190.
Great thing about android is you can experiment and learn through trial and error.
Sent from my PC36100 using xda premium
Hello everyone,
I am using many different roms since i have my desire z rooted.
The only problem is:
i can overclock to about 1 ghz... everything above it results in a freeze were my screen stays awaken.
Does anybody know what i'm doing wrong?
You can try different governors, and others may have some other tips. But its also possible that 1 GHz is all your CPU can handle. Not all CPUs are created equal. Far from it, in fact. There is a reason why CPUs are rated for a certain clock speed, in our case 800 MHz. That's the speed that the manufacturer can basically guarantee stable performance. Anything higher than that, and all bets are off. The manufacturing process has a huge amount of variability to it. So to see some people getting stable performance at 1.5 GHz, while you might not get over 1 GHz with the same series of chip, is not a big shock to me.
What roms are you using?
Sent from my SGH-T989 using xda premium
I have heArd that CPUs of the same phone can perform different. Mine will run all day at 1.8ghz while others get reboots and freezing when they go over 1-1.2 GHz. It really don't make sense to me but I guess it happens. Just glad mine will take whatever the kernel frequency sets allow lol.
Sent from my HTC Vision using XDA App
selfinflicted1 said:
I have heArd that CPUs of the same phone can perform different. Mine will run all day at 1.8ghz while others get reboots and freezing when they go over 1-1.2 GHz. It really don't make sense to me but I guess it happens. Just glad mine will take whatever the kernel frequency sets allow lol.
Click to expand...
Click to collapse
The manufacturing process for any type of CPU is quite variable. They can target a range of clock speeds, but can't efficiently manufacture all the chips at the same exact performance. CPUs actually get testing after manufacturing to determine the clock speed, and are "binned" into various categories based on how they tested. If a CPU doesn't meet the test specs for a certain clock speed category, it will be dropped to the next one down. Its also based on market demand. It completely possible a high performing chip gets labelled and sold as a lower performing one, simply to meet demand.
using the andramadus rom i can get well over 1.5ghz completely stable. you should try that