Related
ok so i downloaded the nightly aokp rom and it will prompt you to accept or decline bug reports at first so i guess i just enabled but after that i cant seem to find where to disable them this is pretty annoying having it go off at times mistaking it for a text or something so any help would be appreciated thanks!
I'm trying to install Hyperdrive RLS10. The flash instructions say to install an AT&T build prop and I've also seen users mention that you will need to fix the google client database for the rom to function properly on AT&T. I can not locate any AT&T build prop to flash and do not know how to fix the google client database. Would anyone be able to help me so that I can get this rom working properly?
mrpoe222 said:
I'm trying to install Hyperdrive RLS10. The flash instructions say to install an AT&T build prop and I've also seen users mention that you will need to fix the google client database for the rom to function properly on AT&T. I can not locate any AT&T build prop to flash and do not know how to fix the google client database. Would anyone be able to help me so that I can get this rom working properly?
Click to expand...
Click to collapse
If you don't know how to do those, you might wanna look into flashing a AT&T ROM first and learn more about what you're attempting to do. (Google is a good friend)
P.S.: Please, don't double post.
BWolf56 said:
If you don't know how to do those, you might wanna look into flashing a AT&T ROM first and learn more about what you're attempting to do. (Google is a good friend)
P.S.: Please, don't double post.
Click to expand...
Click to collapse
I'm aware of what I'm attempting to do. The build prop on this rom needs to be edited or replaced or reflect AT&T since the rom base is Verizon. I'm not new to flashing roms; I've just never had to edit/replace a build.prop for a rom port from another carrier. I've searched google and the rom thread before posting this question. I'm just trying to see if anyone else from the community would be able to advise me what edits I would need to make to the build.prop or if they could help point me in the right direction for a build.prop zip that I could flash through TWRP. I expected the typical "why don't you just google it" response, but was hoping that someone would be helpful enough to actually assist me.
P.S.: I only started this thread after I realized my original post was in a thread with little to no activity.
mrpoe222 said:
I'm aware of what I'm attempting to do. The build prop on this rom needs to be edited or replaced or reflect AT&T since the rom base is Verizon. I'm not new to flashing roms; I've just never had to edit/replace a build.prop for a rom port from another carrier. I've searched google and the rom thread before posting this question. I'm just trying to see if anyone else from the community would be able to advise me what edits I would need to make to the build.prop or if they could help point me in the right direction for a build.prop zip that I could flash through TWRP. I expected the typical "why don't you just google it" response, but was hoping that someone would be helpful enough to actually assist me.
P.S.: I only started this thread after I realized my original post was in a thread with little to no activity.
Click to expand...
Click to collapse
I didn't mean to sound like ''Why don't you just google it''. You gave really low information on your experience and such, therefor, I made a safe suggestion.
Basically, you have to change the phone model to SGH-I747 in the build.prop file with something like notepad.
As for the other part, I have no idea, and this time, google will actually be helpful as I'm sure people attempted this before.
BWolf56 said:
I didn't mean to sound like ''Why don't you just google it''. You gave really low information on your experience and such, therefor, I made a safe suggestion.
Basically, you have to change the phone model to SGH-I747 in the build.prop file with something like notepad.
As for the other part, I have no idea, and this time, google will actually be helpful as I'm sure people attempted this before.
Click to expand...
Click to collapse
I was able to locate the build.prop edits buried in a thread about google wallet. I'm still not sure about the other part, but I have the rom up and running on at&t LTE with no issues. I appreciate your patience. I try to search as thoroughly as I can, unfortunately, work often gets in the way.
mrpoe222 said:
I was able to locate the build.prop edits buried in a thread about google wallet. I'm still not sure about the other part, but I have the rom up and running on at&t LTE with no issues. I appreciate your patience. I try to search as thoroughly as I can, unfortunately, work often gets in the way.
Click to expand...
Click to collapse
Clearing client database means clearing data and cache in the play store app. That's what worked for me on with that issue...or loading another Google account then deleting it then adding your main one.
Verizon Galaxy S3 running RLS10 - call echo issue
Hey, first of all I wanted to say to the developers of the Hyperdrive RLS ROM, this has become one of my preferred ROMS - great stability, battery life, etc. I just upgraded from RLS9 to RLS10. FYI, I always wipe everything prior to installing a ROM. Anyway, installation went off without a hitch and the ROM runs great, but since I upgraded to this ROM, I am getting an echo with every single call even with bluetooth. Not sure if anyone else is having this issue, and if there's a fix for it? Would appreciate any feedback! Thanks, and thank you to the developers for all the work you do.
jpc477 said:
Hey, first of all I wanted to say to the developers of the Hyperdrive RLS ROM, this has become one of my preferred ROMS - great stability, battery life, etc. I just upgraded from RLS9 to RLS10. FYI, I always wipe everything prior to installing a ROM. Anyway, installation went off without a hitch and the ROM runs great, but since I upgraded to this ROM, I am getting an echo with every single call even with bluetooth. Not sure if anyone else is having this issue, and if there's a fix for it? Would appreciate any feedback! Thanks, and thank you to the developers for all the work you do.
Click to expand...
Click to collapse
the echo is just on your end, correct?
go to settings >accessibility and make sure turn off all sounds is not checked to begin with. now go to settings > sound and make sure your volume levels are correct and sound is turned on.
also, phone > menu > Call settings > additional settings and then uncheck noise reduction. some people have reported less echo and clearer calls with this turned off.
jpc477 said:
Hey, first of all I wanted to say to the developers of the Hyperdrive RLS ROM, this has become one of my preferred ROMS - great stability, battery life, etc. I just upgraded from RLS9 to RLS10. FYI, I always wipe everything prior to installing a ROM. Anyway, installation went off without a hitch and the ROM runs great, but since I upgraded to this ROM, I am getting an echo with every single call even with bluetooth. Not sure if anyone else is having this issue, and if there's a fix for it? Would appreciate any feedback! Thanks, and thank you to the developers for all the work you do.
Click to expand...
Click to collapse
A few have reported the same issue on the thread but no real solution beyond hit speaker on then off and it goes away. Reason that works ? I have no clue.
Hey guys
I hope someone has some info on my issues, its kind of driving me nuts hahaha
The settings for toolbars and pie customization does not appear anywhere on the phone, before and after the latest paranoid 4.2beta5 update.
I also flashed the kernel and am using the franco latest release, still the same.
Oh and also the peek notification is activated and nothing appears at all.
Ive done the following clean install of updated ROM and kernel, cleared the dalvik cache a few times
If anyone has any idea whats going on some help would be highly appreciated
Thanks guys
Please read the change log thread. Not all previous features from PA3+ exists in PA4+
The change log lists ALL currently available features
I am having issues with 4g and 3g switching on the device. Some times there will be no signal at all. 80% of the time doing an Airplane mode cycle will fix it. however this is dozens of times a day. This has been an issue since the M8 release. Can anyone send clear directions to a fix please.
System:
LS970
Cm version 11-20140916-SNAPSHOT-M10-ls970
Kernal 3.4.0-CM+
Maybe this post will help. I believe it's in the forum of the ROM you are using. In the future, try reading here for issues.
http://forum.xda-developers.com/showthread.php?t=
HdMsTrTeCh said:
Maybe this post will help. I believe it's in the forum of the ROM you are using. In the future, try reading here for issues.
http://forum.xda-developers.com/showthread.php?t=
Click to expand...
Click to collapse
Not sure if you are being intentionally funny or not, but that link does not go to any thread....
If it was an accident, I think this would be the correct one, right?
http://forum.xda-developers.com/showthread.php?t=2562988
I am not sure what post you were directing that at though.
EDIT: see below for intended post.
Sorry my paste didn't work as expected. here it is....
http://forum.xda-developers.com/showthread.php?p=55462340
Tried that
i couldnt get the APN settings to open up. Through the shortcut maker or terminal. I tried this before posting a new thread. i would have responded to the ongoing thread but XDA rules wont let me post to that one. Had to post here.
domcarreno said:
i couldnt get the APN settings to open up. Through the shortcut maker or terminal. I tried this before posting a new thread. i would have responded to the ongoing thread but XDA rules wont let me post to that one. Had to post here.
Click to expand...
Click to collapse
No problem, everyone starts somewhere.
Try the app "APN Change" from the play store.
better but . . .
So I tried the recommended settings change. Used the Change APN app. LTE is more reliable however when it switches from lte to 3g it will hang for some time or have no connection at all until i cycle airplane mode.
domcarreno said:
I am having issues with 4g and 3g switching on the device. Some times there will be no signal at all. 80% of the time doing an Airplane mode cycle will fix it. however this is dozens of times a day. This has been an issue since the M8 release. Can anyone send clear directions to a fix please.
System:
LS970
Cm version 11-20140916-SNAPSHOT-M10-ls970
Kernal 3.4.0-CM+
Click to expand...
Click to collapse
What radio do you have? (What was the last version of stock you were on?)
Can you get a logcat and radio logcat (logcat -b radio) of the issue happening?
I am using ZVC. The last stock rom i was on was Stocktimus CE 1.5
I dont know how to pull a logcat. Although i have quite a bit of experience flashing and recovering a device from soft brick, I am not much help with troubleshooting. I know just enough to be dangerous.
Hi it was my post that was linked to about adding APNs. I have found that after I flashed stock rooted zvc, updated prl and profile, and restored my CM11 backup, data works fine without requiring a manual APN edit.
However, currently I am running the unofficial GEE-based CM build. I had problems with NFC and battery life last time I tried the official builds (late September), and I do not know the cause or status of those issues. Maybe Shelnutt can weigh in
dwielunski said:
Hi it was my post that was linked to about adding APNs. I have found that after I flashed stock rooted zvc, updated prl and profile, and restored my CM11 backup, data works fine without requiring a manual APN edit.
However, currently I am running the unofficial GEE-based CM build. I had problems with NFC and battery life last time I tried the official builds (late September), and I do not know the cause or status of those issues. Maybe Shelnutt can weigh in
Click to expand...
Click to collapse
i just came from using stocktimus again because i tired of the radio nfc and battery issues as well. dwielunski, what stock rom do you use?
In CM and some others, if you go to settings>mobile networks, there is a built-in shortcut to the APN settings
But honestly, this issue is the most frustrating thing among the AOSP roms, at least for me. It's the one thing that makes me keep flashing back to stock-based ROM's every time I try CM or PA or anything. Why isn't there a clear-cut solution to this when it's such a common problem and we've known about it for so long?
domcarreno said:
i just came from using stocktimus again because i tired of the radio nfc and battery issues as well. dwielunski, what stock rom do you use?
Click to expand...
Click to collapse
Stock rooted zvc as I said. At one point I was using that with a bunch of xposed mods but pretty happy with cm these days. Probably will stay on this until L drops and we get a port. I haven't had any data issues but not sure about NFC
Q&A for [ROM][OFFICIAL] CyanogenMod Nightly Builds for d2lte
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
I'm having the same problem as dewey1973 (http://forum.xda-developers.com/showthread.php?p=55932521#post55932521 - I don't have enough posts on my account to post there.), no LTE on M11. Except it's on RingPlus instead of Ting. I've tried flashing different apns-conf.xml files but they're no longer working in M11 while they were in M9 and M10.
Robotic Earthling said:
I'm having the same problem as dewey1973 (http://forum.xda-developers.com/showthread.php?p=55932521#post55932521 - I don't have enough posts on my account to post there.), no LTE on M11. Except it's on RingPlus instead of Ting. I've tried flashing different apns-conf.xml files but they're no longer working in M11 while they were in M9 and M10.
Click to expand...
Click to collapse
Have any of you tried taking the APN fix for boost mobile and just changing the APNs to what you need and flashing that?
If you're talking about this (can't post regular links yet, sorry)
Code:
androidforums.
com/boost-mobile-galaxy-s3-all-things-root/840501-mod-universal-boost-apn-fix-d2lte-builds-mod.html
then it looks like that worked! Thanks! I had tried a few other APN fixes that didn't work so I had been looking for another way. I'll send a PM to dewey1973 so he can post it in the main thread.
EDIT: It was working for a while but then stopped working. I'll test it more and update when I get a chance.
Well can anyone help me figure out how to fix the aspect ratio with the front facing camera in the latest few snapshots?? The default camera front facing is fine, but third party apps like snapchat distort.. For example, a perfect circle (a coin) will turn into an oval shape up and down. It's driving me crazy
Play Store has wrong carrier
I am running CM11 M12 and when I head to the play store it says that I am on Verizon instead of Sprint. Everything else works amazing except this. I can provide any information that is required. Thanks
knightsyde said:
I am running CM11 M12 and when I head to the play store it says that I am on Verizon instead of Sprint. Everything else works amazing except this. I can provide any information that is required. Thanks
Click to expand...
Click to collapse
This is a known issue. Shouldn't affect anything or prevent you from installing apps though.
It does interfere a little with setting up google voice, but can be handled by manually editing voicemail options
Battery Life M12
I just flashed to stock to get the modem update, then did a clean install of M12 + gapps + Ting APN's, and my battery life is just tanked. I have the phone plugged into USB currently, with Wifi on, bluetooth off, gps off, and I can't even break even on the charge; I'm at 11% and falling fast. I was on M9 (or M8? I can't remember) before this, and didn't have a problem like this. Is there any known issue with battery life in M12?
ADB Debug
I'm on the latest nightly, can everyone else enable ADB? I enable it and within the second it crashes. The catlog says:
Code:
got -1 reading
Communications error
Java.io.IOException: No such file or directory
Is this just me or a Nightly thing?
---------- Post added at 11:59 PM ---------- Previous post was at 11:15 PM ----------
bussemac said:
I just flashed to stock to get the modem update, then did a clean install of M12 + gapps + Ting APN's, and my battery life is just tanked. I have the phone plugged into USB currently, with Wifi on, bluetooth off, gps off, and I can't even break even on the charge; I'm at 11% and falling fast. I was on M9 (or M8? I can't remember) before this, and didn't have a problem like this. Is there any known issue with battery life in M12?
Click to expand...
Click to collapse
I had M12 for a while, I didn't have too much of a battery life problem, you can add the Performance Profile Tile to the Quick Settings Panel and change it from balanced to power save. I always recommend getting better battery stats, created by XDA Developer chamonix, it's not free but its excellent to see exactly what is draining your battery. Kernel Wakelock, Application Wakelock, or an Alarm or something. As always keep radios, modems and such upgraded.
No MMS or data when flashing the VMU APN fix on CM12.1
I flashed the APN fix and I don't have any data or MMS on CM12.1. Can anyone help me or post an APN fix I can use that will solve this problem for me?
Is anybody using this 12.1 ROM? Feedback? I am using the aicp ROM and it is awesome
Check out the Official 12.1 Builds for D2Spr!!
https://download.cyanogenmod.org/?device=d2spr
This is awesome!
So, I'm assuming flashing the CM12.1 would need to be a clean flash after a full wipe if coming from CM11, correct?
Sent from my CM12 ? HTC Desire 816 on Virgin Mobile USA
Videos
look at videos for recovery, root, and other things. They will explain every question you may possibly have.
Sprint S3 CM 12.1 nightly boot loop
I did a fresh install of cm-12.1-20150514-NIGHTLY-d2spr and Im stuck in boot loop. Tried older versions too and I get the same result. Can anyone help me, I'm running CWM 6.0.4.5
Please Help!!!
I have been searching the forums & Google for the past 2 days trying to find an answer to my question: Does the *stock* cm12.1 kernel (official nightlies) come with an alternative to MP-decision (hotplug) & thermald?! I'm desperate to know!! I've installed kernel adiutor and noticed a message stating that if my kernel has an alternative, to disable the option in the app... So I'm confused & haven't been able to find any info at all on the stock cm12.1 kernel, or what features it has, which would be very helpful & nice to know! Thanks in advance to anyone willing to help me out! Any info at all would be highly appreciated!!
Just incase it matters I'm using the d2spr official CM12.1 Nightlies, & I'm on the 5/24 build. Thanks!!!
Messaging force close
Hey I'm running cm 12.1-20151025 and I tried clean installing the snapshot and the 20151205 nightly and messaging would force close continuously. I tried Google messenger same problem. Does anyone have any ideas ?
Theblaide said:
Hey I'm running cm 12.1-20151025 and I tried clean installing the snapshot and the 20151205 nightly and messaging would force close continuously. I tried Google messenger same problem. Does anyone have any ideas ?
Click to expand...
Click to collapse
Did you wipe /system also? I skipped this and it wouldn't boot on the 12/05 build.
I'm also getting a no sim card notification, and not able to add APN's.
I need help ..Rom cm13 does not function on my phone I compound cm12.1 modem system ND8 what reason