Develop Bugs

Help with CM7 boot looping

H'okay. So. I had Myn's 2.2 and I wanted to try out something different so I decided on CM7 RC2.
I do a nandroid backup (ofcourse) and then proceed to wipe my cache/factory reset. I then flash CM7 and then do a partial restore of my data for my apps/contacts.
I then proceed to the boot screen and it just loops, over and over again. Without loading my data, CM7 boots just fine... so what in my data is preventing me from being able to boot into CM7?
Thanks in advance!

Boot into recovery, wipe dalvik cache, reboot system.

Try not restoring the data part of the applications. I've heard sometimes issues can arise from that.

r916 said:
Boot into recovery, wipe dalvik cache, reboot system.
Click to expand...
Click to collapse
I have tried this.
totalanonymity said:
Try not restoring the data part of the applications. I've heard sometimes issues can arise from that.
Click to expand...
Click to collapse
What am I supposed to restore to get apps/contacts back then? :3

What you should do is backup your apps with titanium, backup your rom, then wipe factory/data, cache, dalvik cache, flash the rom. on the first boot, it may take an extra couple of minutes. After you sign in, blah blah, open titanium backup, then restore apps with data, NOT system settings.

What you have to do is flash Calkulin's Format All zip. This will delete everything except for the SD card. While still in recovery reflash CM7 and then while STILL in recovery flash the proper Gaaps. You follow these tlstwps I guarantee it will work without a problem. FYI, in terms of restoring your apps with data more than likely it wont work. I have always had trouble restoring AP data when going from Sense to AOSP (CM) Hope this helped.

[Q] Problem flashing GingerTiny

Just did a clean install of Anthem v2.1 and everything booted up fine. I went into recovery, wiped data, dalvik, and cache, and installed the latest gingertiny kernel. When I reboot from recovery, I get bootloop. What's wrong?

prinzmetal6 said:
Just did a clean install of Anthem v2.1 and everything booted up fine. I went into recovery, wiped data, dalvik, and cache, and installed the latest gingertiny kernel. When I reboot from recovery, I get bootloop. What's wrong?
Click to expand...
Click to collapse
Thats because you wiped data. You should only wipe dalvik-cache and the cache partition.

cmlusco said:
Thats because you wiped data. You should only wipe dalvik-cache and the cache partition.
Click to expand...
Click to collapse
Thank you!

cmlusco said:
Thats because you wiped data. You should only wipe dalvik-cache and the cache partition.
Click to expand...
Click to collapse
Just to add to this. NEVER wipe data after flashing a Sense 3 or Sense 3.5 ROM. Actually even some Sense 2.1 ROMs that is a bad idea.
This is because the way these ROMS are built as the storage in /system cannot hold the whole ROM so they have to build part of it in /data. So wiping data will clear the ROM components as well as the user data. If you have to wipe data, plan to reflash the ROM again. So I say don't wipe data AFTER flashing the ROM unless you plan on reflashing the ROM. You can and will probably need to wipe data before flashing the ROM though.

Is there a reason why Titanium Backup isn't working? When I try to restore the progress bar just doesn't do anything...I had this problem with my Galaxy Tab and I had to change the app processing mode but is there a different issue?

prinzmetal6 said:
Is there a reason why Titanium Backup isn't working? When I try to restore the progress bar just doesn't do anything...I had this problem with my Galaxy Tab and I had to change the app processing mode but is there a different issue?
Click to expand...
Click to collapse
Make sure USB debuggging is on. If it is, I don't know.

I think the problem is that I ran out of internal memory, I have a huge sd card so I think I can solve this problem. Thank you for replying though. I would've posted something on the actual rom page but I don't have enough thumbs up

Having a huge problem with my phone not wiping.

Okay, I was on AOKP M4 and I wanted to upgrade to M5.
So I backup everything and make a backup of my ROM. I wipe the phone and caches and flash M5 with the GAPPS, with the latest CWM touch recovery. When my phone reboots I notice I have the same wallpaper as before and when I unlock my phone my pin is still requested and all of my apps and settings stayed exactly the same. I was never asked to sign into my Google account and the start up/set up screen never came up. I checked to see if I even updated and yes I was on M5. Now the ROM isn't very fast or smooth and I get a lot of force closes and things not working properly.
I tried the whole process again with the CWM non-touch recovery, and again my phone did not fully wipe and all my apps and setting remained exactly the same.
I tried it again with the TWRP touch recovery, and again my phone did not fully wipe and everything was the same and my phone remains kind of slow and I'm getting a lot of force closes.
Why is my phone not fully wiping? What can I do to fix this?
I would really appreciate some help!

you need to wipe factory / data.
wiping cache and dalvik doesn't wipe "/system/etc etc etc"
1. Wipe Factory
2. Wipe Data
3. Wipe Dalvik
4. Flash ROM
5. Flash Gapps.
6. Flash Kernel
for full wipe.

zephiK said:
you need to wipe factory / data.
wiping cache and dalvik doesn't wipe "/system/etc etc etc"
1. Wipe Factory
2. Wipe Data
3. Wipe Dalvik
4. Flash ROM
5. Flash Gapps.
6. Flash Kernel
for full wipe.
Click to expand...
Click to collapse
Yes, that is what I'm doing. I'm wiping factory/data and I'm still having the same problem

Like with the TWRP recovery, I went to wipe, I hit factory reset, then cache, then dalvik cache and then flashed the ROM and GAPPS and all my apps and settings stayed the same. It was like if I had dirty flashed it. I don't understand what's going on.

zephiK said:
you need to wipe factory / data.
wiping cache and dalvik doesn't wipe "/system/etc etc etc"
1. Wipe Factory
2. Wipe Data
3. Wipe Dalvik
***FORMAT /SYSTEM*** (under mount in CWM I believe)
4. Flash ROM
5. Flash Gapps.
6. Flash Kernel
for full wipe.
Click to expand...
Click to collapse
Try that additional step too. May or may not help
Sent from my Galaxy Nexus using XDA

killyouridols said:
Try that additional step too. May or may not help
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
What does that do exactly? Would I have to worry about my media and sd card being wiped?

SubyWill said:
What does that do exactly? Would I have to worry about my media and sd card being wiped?
Click to expand...
Click to collapse
No, all music, pictures ect will still be in place.
Sent from my Galaxy Nexus using XDA

Okay thank you, I guess this time in TWRP I'll do factory reset, cache, dalvik cache, and system and see if it works out

Okay, so I did factory reset, cache, dalvik cache, and format system.
I flashed M5 and GAPPS, rebooted and everything was still the same. My phone did not fully wipe.
I don't understand what's going. I'm so frustrated right now

SubyWill said:
Okay, so I did factory reset, cache, dalvik cache, and format system.
I flashed M5 and GAPPS, rebooted and everything was still the same. My phone did not fully wipe.
I don't understand what's going. I'm so frustrated right now
Click to expand...
Click to collapse
I would do a factory reset, if that doesn`t help flash a stock rom and root your phone again. BTW don`t you have a nandroid backup to revert to

gee2012 said:
I would do a factory reset, if that doesn`t help flash a stock rom and root your phone again. BTW don`t you have a nandroid backup to revert to
Click to expand...
Click to collapse
I have a nandroid backup, but that doesn't solve the problem of my phone not wiping.
I guess I'll unroot my phone and lock the bootloader and re-do everything to see. I don't understand why my phone isn't wiping correctly.

sometimes cwm just doesnt work with factory wipe. i've used it a few times now and sometimes it works and sometimes it doesnt. i have no idea why. you can try doing a factory wipe from the phone settings>backup and reset. ive only done that twice but it worked both times. if that still doesnt work just go with a fresh flash of google images using fastboot.

SubyWill said:
I have a nandroid backup, but that doesn't solve the problem of my phone not wiping.
I guess I'll unroot my phone and lock the bootloader and re-do everything to see. I don't understand why my phone isn't wiping correctly.
Click to expand...
Click to collapse
Init.d folders can only be wiped with a factory reset afaik, or manualy off course. By locking and unlocking the phone you perform a factory reset anyway, so i would flash a stock rom and start fresh. No chance on left files or scripts. You can do it with GNex Toolkit, option 8. Put the downloaded and not extracted .tgz file here C:\Galaxy Nexus ToolKit\put_google_factory_image_here and flash.

Thanks guys, I'll try that!

[Q] Installing JB help please

Ok so I downloaded a JB rom rebooted in CWM touch I then
wipe data /factory reset
Wipe cache partitions
Wipe dalvik cache
Format system
Format cache
Format data
And flashed the rom
I reboot and it gets stuck sometimes in the Google screen or the X screen
I have left it booting for 1hr and nothing
Due system/cache /data have to be unmounted?

hi there, only thing you must do is to wipe factory, and wipe cache, dont wipe and format other things there.. if you have a back up of your prevoius stock rom, restore it again to restore all you had been formated, to restore your phone to normal, and install again your jelly bean rom but this time just wipe cache and wipe facetory thats all you need to do. sorry for the english

Has pestname
ricoraf said:
hi there, only thing you must do is to wipe factory, and wipe cache, dont wipe and format other things there.. if you have a back up of your prevoius stock rom, restore it again to restore all you had been formated, to restore your phone to normal, and install again your jelly bean rom but this time just wipe cache and wipe facetory thats all you need to do. sorry for the english
Click to expand...
Click to collapse
Alright I'm trying that right now thanks a million

kingviper10 said:
Alright I'm trying that right now thanks a million
Click to expand...
Click to collapse
It's pass the Google screen now in the glowing X screen its been on for like 15 min is that normal?

Its should not take that long after flashing the rom max time it takes is 5 mins for me will be same for all there must be something wrong

CMW Touch usually does not play well with JB.
Try flashing with an older CMW.

Alright thanks for the help restoring back to aopk 40 and going to flash a older cwm then rebooting into cwm wipe factory and cache then JB v3 then rebooting it hope fully it works

Good luck, hope it works out for you.

Messaging and Phone apps keep crashing

Hey all,
I've been searching for a while now and decided I should just post my question finally. I have the Galaxy SIII, rooted, and running CM10 stable. For the last 3 months or so, my SMS app, Messaging, has been randomly force closing and crashing. The only way to fix it is by rebooting the phone. I've tried re-flashing the mod 5 times, and even wiped data and done 2 factory resets. Still no luck.
And more recently my "phone" app has been doing it too. It crashes when I open up the dial pad and drops calls randomly and I have to restart my phone for it to work again.
Both of these will happen randomly. Sometimes I can go 4 hours without having to restart my phone, other times I have to restart my phone every 20 minutes. It's really starting to bug me.
Is there an app that's known to cause these crashes? Or is there a possibility that the mod file is corrupt? Thoughts? Questions? Any help is appreciated!!

When you flashed Cm10, did you come from stock or a custom rom? Did you also format /system?
If you made a nandroid while on stock, I would:
Wipe data, cache, dalvik and restore that. Then (assuming you still have Cm10 and gapps zips on your device) I would wipe data and caches again, format /system and flash rom/gapps. Wipe data/cache and reboot.

xBeerdroiDx said:
When you flashed Cm10, did you come from stock or a custom rom? Did you also format /system?
If you made a nandroid while on stock, I would:
Wipe data, cache, dalvik and restore that. Then (assuming you still have Cm10 and gapps zips on your device) I would wipe data and caches again, format /system and flash rom/gapps. Wipe data/cache and reboot.
Click to expand...
Click to collapse
When I flashed, it was from a previous CM10 ROM that worked fine. I reflashed because one of my apps was getting an "unknown" error, and now this crashing is happening. I don't think I have ever done "format /system". How do I go about that?

tango259 said:
When I flashed, it was from a previous CM10 ROM that worked fine. I reflashed because one of my apps was getting an "unknown" error, and now this crashing is happening. I don't think I have ever done "format /system". How do I go about that?
Click to expand...
Click to collapse
To have a completely clean install, you should always:
Wipe data
Wipe cache
Wipe dalvik (under advanced)
Format /system (under mounts and storage)
Flash rom
Flash gapps
Wipe data
Reboot
Be sure to have whatever you feel important backed up as this will wipe your system. Make a nandroid first if you don't already have one

xBeerdroiDx said:
To have a completely clean install, you should always:
Wipe data
Wipe cache
Wipe dalvik (under advanced)
Format /system (under mounts and storage)
Flash rom
Flash gapps
Wipe data
Reboot
Be sure to have whatever you feel important backed up as this will wipe your system. Make a nandroid first if you don't already have one
Click to expand...
Click to collapse
Thanks!! I'll try it tonight and post with the results tomorrow. Last time I flashed it took 2 days until the problems arose again.

tango259 said:
Thanks!! I'll try it tonight and post with the results tomorrow. Last time I flashed it took 2 days until the problems arose again.
Click to expand...
Click to collapse
There shouldn't be any issues if you have flashed correctly. Many users have also noted that a custom rom performs better when returning to stock and then flashing the new rom via the above procedures. Feel free to pm me your results

What the???
xBeerdroiDx said:
There shouldn't be any issues if you have flashed correctly. Many users have also noted that a custom rom performs better when returning to stock and then flashing the new rom via the above procedures. Feel free to pm me your results
Click to expand...
Click to collapse
To have a completely clean install, you should always:
Wipe data
Wipe cache
Wipe dalvik (under advanced)
Format /system (under mounts and storage)
Flash rom
Flash gapps
Wipe data <------------- ????
Reboot
I can't see this is a good thing, but I'm a noob.
You're saying after installing the new ROM and apps (Flash rom Flash gapps), you then go back into CWM and select 'wipe data/factory reset'??
Again, I'm a noob and maybe I'm reading this wrong!
Doing a wipe again right after installing a new ROM sounds so wrong to me.
What would that do?

RoidRulez said:
Wipe data <------------- ????
Click to expand...
Click to collapse
This step (step 7 in your list) isn't necessary.
When in doubt, follow the directions in the OP of the rom you are trying to flash, usually can't go wrong.