Ever since upgrading my firmware to AT&T's latest my wifi won't autoconnect to saved networks. I have to go into settings and connect manually. Has anyone else run into this? Any ideas on how to fix it?
I'm running Viper 2.3 (it also happened on 2.1), if that matters.
How did you update the firmware exactly, latest (2.23) OTA?
Did it work before flashing Viper?
Related
Hello guys,
I have a very weird problem with my Desire ... I've updated it using the official Gingerbread RUU and now it won't connect to any APN.
The APN settings are correct(triple checked, they work on other phones), the mobile network is working (tried other phones/sims)...but not on my desire - it just says the it could connect because the APN settings are wrong .
Tried to use a older RUU to downgrade but it won't work it just spits out a random error every time - low battery, can't connect to phone, etc.
Everything else runs as it should - only the mobile network doesn't. I've installed all APN management apps out there ... toggled it on and off, added different APNs ... and no success.
Can you point in the right direction ? If there is one.
I would like to keep the 2.3.3 if possible ... if not ... what's the best method of downgrading ?
I have backup files made with ROM manager before upgrading ....can I flash those somehow without root ?
Thanks.
re
same problem. i can connect only to 2g network no 3g. and only after i updated the official ruu. you have to wait for root and downgrade method to be found and then u can flash custom rom.
How did they test this RUU ? It took them, HTC, half a year to release it and now it renders your phone useless. Hope someone finds a root method soon .
I have been searching around for answers to my question for a few hours and have come up with nothing.
I originally flashed an older rom onto my phone in order to unlock it, then it did the OTA update to 4.3, following which I used CF auto root to successfully root it. Now this is what I have:
AT&T Galaxy S3
Android version 4.3
Baseband version I747UCUEMJB
Build Number JSS15J.I747UCUEMJB
SE Android Status Enforcing SEPF_SMSUNG-SGH-I747_4.3_0024
When I try to enable wifi tethering, either natively or through Portable Wifi Hotspot or other apps then I get the message that "Mobile data is not available or invalid SIM", neither of which is true. I have been able to get FoxFi/PDANet to work for bluetooth tethering, but not WiFi which I need for some of the devices I have with me.
I have seen that perhaps there are some modem/bootloader files that can be flashed over, but those seem to be specific to the leaked version of 4.3 , and I dont know if they would work for the UCUEMJB.
Is there any way I can do a simple mod to enable the wifi teathering? Would prefer to avoid flashing another rom bc Im traveling through Latin America and access to decent internet is a big issue (hence the need to tether).
Thanks!
I update my htc one m8 to Android 5.1 by flash a stock non-rooted img downloaded from
Graffixnyc(.com)
My phone is s-off.
I used to have Android 5.0 on my m8, also flashed img from the same website. Everything was good on 5.0. But after the update or the flash, my Bluetooth unable to pair with any device anymore. Specifically, it could "pair" with other devices, but right after the pair finished, the connection is lost. So far other functions are fine except Bluetooth.
I tried to flash the firmware 5.1 from the same website but it doesn't help.
Does anyone have the same issue here? Or do you have any idea?
Some people have reported issues with BT 5.1 firmwares, but I flashed 4.4.4 dev edition firmware,and I have yet to have a BT problem. I'm currently on BlissPop's latest official release.
jxcorex28 said:
Some people have reported issues with BT 5.1 firmwares, but I flashed 4.4.4 dev edition firmware,and I have yet to have a BT problem. I'm currently on BlissPop's latest official release.
Click to expand...
Click to collapse
Many thanks for your reply.:good: I will try to flash firmware 4.4.4.
I think it's not necessary to update bootloader for running bluetooth correctly, am I right?
Shenjianhong said:
Many thanks for your reply.:good: I will try to flash firmware 4.4.4.
I think it's not necessary to update bootloader for running bluetooth correctly, am I right?
Click to expand...
Click to collapse
Actually, flashing sense firmware 4.16.709.9 into gpe android 5.1 is not a good idea. It made my phone bricked.
flashing gpe firmware 5.0 in gpe andriod 5.1 gets the same result.
I really dont know the solution.
Hello,
I followed this guide to restore my sprint LG G2 to stock Kitkat 4.4.2. Everything went fine, the phone is working, the only problem I have is that I can't connect to any network. The phone is not recognizing any of the local network providers. I bought this phone on ebay and it came with a custom rooted rom installed on it, so I decided to "clean up the mess" and restored stock kitkat. As I mentioned before everything went fine, but the network is not working (it was working with the android version before i restored stock 4.4.2). Maybe its because I'm not living in the USA (I'm from Bosnia/Europe). Should I flash a different radio on it? The phone is updating atm with OTA and I'm pretty sure that the updates wont help. Did anyone else had these issues? Any help would be highly appreciated.
Update: My phone just got upgraded to Lollipop, but the network issue is still present
Update 2: I just reinstalled "cm-12.1-20151031-NIGHTLY-ls980" Lollipop 5.1.1. and it had no problems to find all the networks in my area, so this clearly has to do with stock LG android 4.4.2.
When you say you can't connect to network, are you referring to your mobile carrier network, or like WiFi?
If it's your mobile carrier that you can't connect to, you might need to switch your radio. Take a look at this guide and the section about using radio switcher: http://forum.xda-developers.com/sprint-g2/help/how-sprint-lg-g2-ls980-to-t-mobile-t3230685
Fuzz1303 said:
When you say you can't connect to network, are you referring to your mobile carrier network, or like WiFi?
If it's your mobile carrier that you can't connect to, you might need to switch your radio. Take a look at this guide and the section about using radio switcher: http://forum.xda-developers.com/sprint-g2/help/how-sprint-lg-g2-ls980-to-t-mobile-t3230685
Click to expand...
Click to collapse
Hey there. Sorry for the late response. I kinda gave up on making the stock LG ROM work, which is why I kept on using CM12.1 . What I was referring to was my mobile carrier. The phone has no problems connecting to any WiFi signal.
I didn't try to flash any radios at all after restoring the LG G2 stock ROM. Maybe I should have tried one of the radios from this CM12.1 for LG G2 tutorial. Here is a direct LINK to the full list of LG G2 radios, where I downloaded the radio for my phone. I'm not sure if the other LS980 Radios would work on my device. There are 4 different radios available for the LG G2 LS980.
Do you think flashing one of these radios would help solving this problem after restoring the LG stock ROM?
Hello,
I was impatient and I used a VPN to download the latest update through OTA. However, now no Sims are detected. Anyone got the same issue?
I'm unrooted on stock roms only. Otherwise is there an easy way to go back to the previous version?
Thanks a lot!