SKernelSuper Fast - Super Smooth - Super Stable - Super Reliable
- Super COOL -
Thanks to Darmer Aldevaran for the new logo!
For new releases, please go here - SKernel Pwoli Edition
Code:
#include <disclaimer.h>
/*
* Your warranty is now void. *
* This kernel is 100% guaranteed won't eat your pet cat *
* No guaranteed this'll explode your device, be careful, follow the instructions ! *
* DON'T point at me if your alarm dies after flashing this kernel ! *
*/
Features
- Based on Linux 3.4.11 Source
- zRAM
- zCache
- zSmalloc
- KSM
- Overclock - to 1200MHz
- Underclock - to 61 Mhz
- 800MHz Undervolt
- 402 MB RAM (408MB on 0.1.4)
- Frandom - Entropy Generator
- Some ARM v7 optimizations
- Performance enhancements
- Audio enhancements
- And much more!
Coming soon
- Jelly Bean 4.1.2 Support
- Stock ROM support
Governors
- smartassv2
- interactive
- conservative
- ondemand
- smartassH3
- performance
- intelliactive
- smartmax
- wheatley
- dancedance
- interactiveX
- lagfree
Coming Soon
- intelliactive
- smartmax
- wheatley
- interactiveX
- dancedance
- lagfree
Upcoming Governors and I/O schedulers are courtesy of F4uzan, he made them error free and stable for msm7x27
I/O Schedulers
- noop
- deadline
- cfq
- bfq
- sio
- fiops
- sioplus
- zen
- vr
Coming soon
- sioplus
- vr
- zen
Bugs
- Overclock on both Beta and Stable Release gives reboot on CM11 Beta 9.3 (and other ROMs based on it)
- WiFi doesnt work on some ROMs
- You tell me
Installation
Reboot to recovery
Flash the zip
Reboot
Enjoy SKernel!
Latest version is always here - Mediafire
Note : Select the correct version, if your phone is E612 select E612, else, NO Deep Sleep!
Also, read Post #2 before installing the kernel!
Thanks to:
- TeamHackLG : For sources (I used as base!)
- F4uzan - For all his help (that's a lot!), and most importantly for inspiring me to build a kernel from source!
- Darmer Aldevaran : For the beautiful logo of this project!
Source Code for SKernel L5
Source Code for SKernel L7
XDA:DevDB Information
SKernel, Kernel for the LG Optimus L5
Contributors
skyinfo, F4uzan
Source Code: https://github.com/shskyinfo/SKernel
Kernel Special Features: CPU - Overclock, Underclock and UnderVolt. Entropy - Frandom. Governors - 12. I/O - 9. And much more!
Version Information
Status: Stable
Current Stable Version: FINAL
Stable Release Date: 2014-12-17
Current Beta Version: Release Candidate 4
Beta Release Date: 2014-11-28
Created 2014-08-25
Last Updated 2015-01-11
#Reserve 2: Information and Banners
Q: Which version should I install?
A: If you're on CM11 Beta 9.2+ or a ROM based on its sources, then use latest beta release!
Else, use Beta 0.1.4
However, Beta 0.1.4 does not have latest features of SKernel.
Beta 0.1.4 has only over clock, under clock and undervolt (on 800MHz)
Use only if your current ROM isn't CM11 Beta 9.2+ based!
Q: Why am I getting flickers?
A: You're on a wrong version of kernel, ie, kernel is slightly incompatible, try switching between Beta 0.1.4 and latest release!
Q: Where can I find Beta 0.1.4
A: It can be found in older releases on mediafire
Q: Which version should I flash
A: Flash kernel to respective model number (E610/E612)
Q: Which frequency is the safest
A: The default frequency, 800MHz, is the safest!
But, there's no harm in overclocking upto 1100MHz.
You MAY face some issues on 1100MHz, but 1050MHz is stable as 'rock'!
Q: WiFi doesnt work for me
A: Use the kernel I made for CyanHacker ROM (available on the thread)
Q: Why am I not feeling 'smooth' on latest CM11?
A: Use this kernel for CM11 Beta 10 (PecanCM) and v5.0 (Plamb1r)
All Banners by @Darmer Aldevaran
Feel free to use and dont forget to thank him!
Reserve #3 - Changelogs
Changelogs:
FINAL Edition - 17/12/14
Removed 1100+MHz frequencies - too unstable
Added Voltage Control
Fix battery drain
Optimized ARM algorithms
Increased MDP size for smoother wake up
Optimized schedulers
Added Sound control : WCD9320 with GPL
Visit GitHub
Release Candidate 4 - 28/11/14
Completed Governors list - added lagfree and interactiveX
Completed I/O list - added vr
Re-enabled sio
Deafult governor is now sioplus
Reduced default min frequency to 61MHz
Better CPU scaling
Fixed lags on 1100+MHz
Optimized source code
Better battery
Release Candidate 3 - 26/10/14
Updated to stable Linux 3.4.11
Using updated drivers
More RAM - Increased to 402MB
Some 'Under the hood' changes
Release Candidate 2 - 11/10/14
Lots of CPU tweaks
Performance tweaks
Low memory tweaks
Lots of 'Under the hood' changes
Release Candidate 1.1 - 10/10/14
Updated to latest TeamHackLG sources
Wake up tweaks
Battery tweaks
'Under the hood changes' - Visit GitHub
Release Candidate 1 - 25/09/14
Updated to Linux 3.4.4
Using updated drivers
New patches (From Linux 3.4.4)
Added new I/O Scheduler - zen
GPU Enhancements
Added 2 new CPU frequencies - 1150MHz and 1200MHz (no reboots)
ARM v7 optimization
Beta 0.6.1 - 17/09/14
Updated to Linux 3.4.2 sources
Using new and enhanced drivers
Memory fixes
Lots of patches (from Linux 3.4.2)
Added new governor - dancedance
Reinforced Frandom
Beta 0.5.1 - 15/09/14
Added UKSM
Dyanamic File Sync
Better UI response
Performance Tweaks
Optimized Memory Allocator
Optimized Entropy
Added new I/O - SIOplus
I/O optimization
And much more - visit Github
Beta 0.4.2 - 13/09/14
Added 2 new governors - SmartMAX and Wheatley
Updated to latest TeamHackLG sources - fully compatible with CM11 Beta 9.4
Beta 0.4.1 - 04/09/14
Increased user available RAM - to 402MB
Added new governor - Intelliactive
Added Frandom - Entropy Generator
'Under the hood' changes - Visit GitHub
Beta 0.3.1 - 03/09/14
Fully fixed Overclock, no more reboots
Reduced default Min Frequency to 122MHz
Audio fixes
Updated to latest TeamHackLG Sources
And much more - visit GitHub!
Beta 0.2.4 - 01/09/14
Fixed Kernel Panic on Overclock, thanks @PecanCM
Beta 0.2.3 - 26/08/14
Fixed WiFi - works perfectly now
Only major changes shall be listed here.
For In depth changes, please visit GitHub!
Reviews on SKernel
droidxx9 said:
I tested beta 0.2.3
No issues, its good, and dunno about under clock battery life, I just installed it, will say more on this later as I use.
Bug as said in op is that oc causes kpanic in cm11 b9.3
Hope u fix that.
First time seeing a kernel with clock speed as low as 61MHz.
Its good for CPU at idle state.
Great job
Sent from my IdeaTab A2107A-F using xda app-developers app
Click to expand...
Click to collapse
NeverDeadTR said:
Good work!. We'll wait for new updates.
Click to expand...
Click to collapse
-CALIBAN666- said:
Hell,this kernel is cool,very fast in any way,no nothing issue and all freq works like a charme,keep it up.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GREETZ FROM TEAM-OPTIMA!!!
Click to expand...
Click to collapse
Abhijeetsinghvsf said:
@skyinfo
This kernel on CM11 gives best performance ever.
Thank you so much!!!!
Sent from my LG-E610 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
juanche007 said:
+1
Hello this kernel with CM 11 beta 9.3 is very good, no more kernel panic and reboot
Using Intelliactive governor, frequency 61 MHz to 1.100.Mhz
Thanks for your work.
Click to expand...
Click to collapse
juanche007 said:
if skernel is fantastic with CM11 beta 9.3
Click to expand...
Click to collapse
Ysfemrhn said:
I just flashed this kernel and all I only can say is this is awesome!
Click to expand...
Click to collapse
NextgenBold said:
This kernel is good, no reboots while turning on wifi. Keep up the work (O_
Darmer Aldevaran said:
Awesome. My phone is very smooth and very fast, music sounds great, battery drain is lower. Certainly the best kernel
Click to expand...
Click to collapse
junephel said:
Just awesome. you're awe inspiring man!
Thank you so much for your dedication and hardwork sky.you deserve to be praised...definitely be waiting for the reopening...
goodluck in everything you do!
Sent from my LG-E610 using XDA Free mobile app
Click to expand...
Click to collapse
droidxx9 said:
Its been sometime since I've been here.. Happy to see the success of this kernel. Its smooth, fast and powerful.. Great job dude.. I just wanted to say a thank you for your work.. You are really dedicated .. I can see that, and you care and respond to user queries/sugessions (which some devs ignore) ...
Really keep up the good work!!
All the best for your exams! Come out with flying colors
Sent from my IdeaTab A2107A-F using XDA Free mobile app
Click to expand...
Click to collapse
Plamb1r said:
Oh...during the night 0% 0.0
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Finally you've done it!!
Congratulations bro!! Nice to see this here.
A suggestion, skykernel would sound better
Sent from my LG-E610 using XDA Premium 4 mobile app
WiFi!!
Got WiFi working!!
CM11 latest Beta 9.3!!
Update from mediafire!!!
I tested beta 0.2.3
No issues, its good, and dunno about under clock battery life, I just installed it, will say more on this later as I use.
Bug as said in op is that oc causes kpanic in cm11 b9.3
Hope u fix that.
First time seeing a kernel with clock speed as low as 61MHz.
Its good for CPU at idle state.
Great job
Sent from my IdeaTab A2107A-F using xda app-developers app
Awesome work,thats very,very,very cool,respect for the work.
a request from me for a feature,is it possible to become dualboot?
-CALIBAN666- said:
a request from me for a feature,is it possible to become dualboot?
Click to expand...
Click to collapse
I'm not sure if its possible and I don't have much idea, I'll Google and let you know.. 2 weeks (I have exams now) and if its possible, then I'll try adding
Sent from my Moto G XT1033 using Tapatalk
dont stress you brother,i wish much luck for your exams,i hope you make it!!!!!!
-CALIBAN666- said:
dont stress you brother,i wish much luck for your exams,i hope you make it!!!!!!
Click to expand...
Click to collapse
a year ago in 4pda Chacha_Ivanov make a kernel to do a dualboot whit stok 4.0.4 and cm10
http://4pda.ru/forum/index.php?act=...opics=353120&source=pst&sort=rel&result=posts
i know,but i think its awesome to have it on kitkat roms because cm10 is not so cool(my opinion).
-CALIBAN666- said:
i know,but i think its awesome to have it on kitkat roms because cm10 is not so cool(my opinion).
Click to expand...
Click to collapse
i think too, is for skyinfo to understand how he can do.
OT. which rom would you like whit kitkat?
Yes mann!!!Finally!!!!+1
Congrats!!!
Sent from my LG-E400 using XDA Free mobile app
Dario9781 said:
a year ago in 4pda Chacha_Ivanov make a kernel to do a dualboot whit stok 4.0.4 and cm10
http://4pda.ru/forum/index.php?act=...opics=353120&source=pst&sort=rel&result=posts
Click to expand...
Click to collapse
Hey,
Could you provide a link to his github if possible?
For now, next what I'm trying to add is Frandom (Entropy) and a couple of governors
Sent from my Moto G XT1033 using Tapatalk
For dual boot I suggest to look at Motorola defy p.ex. I remember you could do it with as many roms as you like from external sd for o2x it was done by an app that made you switch between two roms. This should be possible for every device running Android as long as it's possible to change the partition size and code a split system, one for one rom and one for another. I'm not capable, but please take a look, at least in dev section at o2x. Look in the stickies for @spyrosk aio tread
Good work!. We'll wait for new updates.
SuperSkill said:
For dual boot I suggest to look at Motorola defy p.ex. I remember you could do it with as many roms as you like from external sd for o2x it was done by an app that made you switch between two roms. This should be possible for every device running Android as long as it's possible to change the partition size and code a split system, one for one rom and one for another. I'm not capable, but please take a look, at least in dev section at o2x. Look in the stickies for @spyrosk aio tread
Click to expand...
Click to collapse
Hi,
Thanks!
I just went through his thread for P990 dual boot.. Seems he has done something with the boot loader to achieve it.. Actually, my friend told embedding dual boot in kernel is easy, but he hasn't figured out how to do in L7 or L5.
I'll definitely look into that later. For now, Frandom .. I've got the required files now.. Now for the build..!!
Sent from my Moto G XT1033 using Tapatalk
Youre great,many thanx bro.
GREETZ FROM TEAM-OPTIMA!!!
Related
Hi
I started a new kernel "project"
Compared to Titanium-KISS this will include also experimental features
and will likely "move away" from HTC kernel sources in the future.
So this kernel is my "playground" but I try to keep it usable
and working all the time but you can expect that some things will
be broken from time to time
The first version is based on latest KISS kernel
So it includes all "well-known" features available there
I am not responsible for anything bad happens to your device
when using this kernel
github:
https://github.com/maxwen/primou-kernel-HELLBOY
Download:
http://www.mediafire.com/?lo2ctaplonbdh
201305202359
Changelog:
-reverted to BFQ v5.1 - v6 causes problems
-smartmax update
201305140232
Changelog:
-upgrade to BFQ v6
-added smartmax CPU governor
201305062257
Changelog:
-S2W fixes
-enabled fauxsound support
201305060119
Changelog:
-added double tap to wake
allows waking up the device by double tapping on the lower part of the screen - disabled by default
sysfs interface:
Code:
/sys/android_touch/s2w_allow_double_tap
1 -enable 0 - disable
Code:
/sys/android_touch/s2w_double_tap_barrier_y
default 1300 - y-barrier below that taps will be recognized
Code:
/sys/android_touch/s2w_double_tap_duration
default 150 - time in ms for minimal duration between the two taps
Code:
/sys/android_touch/s2w_double_tap_threshold
default 150 - threshold how much longer the duration can be then duration
20130411
4.2 version with fixed accelerometer - thanks to 1ceb0x
http://www.mediafire.com/?y04jyyu2wk2fig3
201302142348
Changelog:
-added fast charge
to enable run
Code:
echo 1 > /sys/class/power_supply/battery/fast_charge
-from now one you will also find the 4.2 in the same download location
it may have a different build data - Just look at the tag 42 in the file name
There is only one small source change required to work on 4.2 roms.
201212251747
Changelog:
-multi touch fix - thanks to d-panja3 for pointing me at this
201212152218
ChangeLog:
-completely new S2W based on the work of nik3r and myself for the HOX+
201212151740
Changelog:
-enable support for KSM http://en.wikipedia.org/wiki/Kernel_SamePage_Merging_(KSM)
to enable go to performance settings -> memory management -> Kernel samepage merging
201212011716
Changelog:
-switched to linaro 4.7 toolchain
-overhaul of compile flags
-improved lowmemorykiller
-added some arm specific fixes and enhancements
-reduced default vibrator strength
201211242348
This is for CM10 only!
Changelog:
-ramdisk change required for - http://review.cyanogenmod.org/#/c/19249/
201211231230
Changelog:
-updated interactive govener
-cleanup ramdisk
-readd fix for screen flickering in CM10
201211212238
Changelog:
-added interactive govener
-cleanup logging
-switched to SLOB memory allocator (needs testing if it will be an imrprovement)
201211160001
Changelog:
-included zram support http://en.wikipedia.org/wiki/ZRam
using CM10>=2011115 this works out of the box
using CM9 you need to flash this in recovery http://goo.im/devs/maxwen/CM10-primou/zram-script.zip
201211062321
HELLBOY kernels will from now on only for CM ROMS
Sense users use KISS kernel http://forum.xda-developers.com/showthread.php?t=1765687
Changelog:
-fix for screen flickering in CM10
201211052318
Changelog:
-this is only for CM10 now - others will follow after I have time to test
-updated to latest msm adreno kernel drivers
201210251305
Changelog:
-added BFQ scheduler
-debloated HTC stuff
-enabled OC up to 2.0GHz
Have fun
Max
awesome~try this one~THX
Max is this compatible with my CM10 rom's? as the PA\AOKP gsm differ ram disk wise from mine. if not it's fine, just put up a warning please
Hi
Oops - wait a little bit
Need to reupload
max
EDIT: new upload done
Lloir said:
Max is this compatible with my CM10 rom's?
Click to expand...
Click to collapse
It is build on latest CM10 ramdisk from "yesterday"
so the warning should go to all who are NOT using your CM10
I will not maintain different JB ramdisk so all users of
JB "based" ROMs like PA and AOKP be aware of this. You can try but I
will not guarantee that it works
maxwen said:
It is build on latest CM10 ramdisk from "yesterday"
so the warning should go to all who are NOT using your CM10
I will not maintain different JB ramdisk so all users of
JB "based" ROMs like PA and AOKP be aware of this. You can try but I
will not guarantee that it works
Click to expand...
Click to collapse
will check it on PA GSM. actually, the PA rom should not have a different ramdisk than cm so it should work.
I'll test on AOKP and let u know in a few hours.....keep it up
Sent from my One V using xda app-developers app
Confirm as working on latest PA 2.50 from GSM side.
No FC's, no errors..
It needs some improvements here and there but I know this is the first release so I will be gentle .
Congratulations Max and keep this work up. I might have found the right kernel for me.
work's like Sex on CM10 and UJ dude no issues at all, no slow downs nothing
Works perfect with with amazing sense v 0.2 up to 1.7ghz
Sent from my HTC Desire S using xda premium
Pre-oc and uv sense kernel
Build for Sense with pre-oc and uv
CHANGELOG:
Minimum freqency is 368mhz at boot
Max freqency is 1.7ghz at boot
UV for higher oc values is -25
-All thanks to maxwen
Download: http://shubham.viperbravo.info/boot-HELLBOY-sc-OC-VDD.img
i got the cm9 and cm10 versions from the name
can u plz tell me whats "boot-HELLBOY-201210251305.img"
abhikm001 said:
i got the cm9 and cm10 versions from the name
can u plz tell me whats "boot-HELLBOY-201210251305.img"
Click to expand...
Click to collapse
Sense Version.
kool
hey the ROM works like a CHARM on my AOKP 4.1.2 [bulid 24th oct] maintainded my rukin
keep up the good WORK
Hi
Just some more information about this kernel.
There are 2 motivations for me for this
1) Adi_Pat has unfortunately stopped his kernel dev for the moment
so I would like to continue his great work by integrating some of his
changes and improvements
2) moving towards a mainstream CAF kernel
To support simonsimons34 project to provide me a test platform
where I can easily test and try CAF components before.
max
1ceb0x said:
It needs some improvements here and there but I know this is the first release so I will be gentle .
Click to expand...
Click to collapse
Just tell me what you have in your mind
and I will see if I can do it
maxwen said:
Just tell me what you have in your mind
and I will see if I can do it
Click to expand...
Click to collapse
some improvements in internal task killer would be great to revamp a little the amount of ram free... right now the free ram is less with 10-15 mb than kiss kernel.
Van u add more governor's and schedulers? And one more req...voodoo sound please
Sent from my One V using xda app-developers app
@shubham can you build a sense version without uv as my phone does not boot an undervolted kernel. Please.
NOTE - This is only for the Stock Based 4.2.1 rom Kernel, or a ROM that is based on stock, such as GRIMLOCK, ENERGY or CROMI. If you are looking for a CyanogenMod based kernel, then please GO HERE
Looks like nobody is doing kernels for our TF300T anymore so I figured I would give it a try. Please let me know what you think
FEATURES
-Based off of the newest Kernel source from Asus (10.6.1.27.5)
-Dynamic Fsync control [V0.6]
-Modified Ramdisk for insecure kernel and init.d support [V0.1]
-added in smartassV2 governor - more to come [V0.2]
-Overclocking to 1.7GHZ [V0.2]
-Added CIFS support (needs testing) [V0.3.1]
-Added support for requested USB network card (DUB-E100 revision C) [V0.3.1]
-Added SIO, Deadline, and VR scheduler [V0.4]
-Voltage control - [V0.5]
-Hope to have fixed the temp "bootloop" issue [V0.6]
-kexec hardboot to enable data2sd support
-GPU OC control
LINK - GRIMLOCK_KERNEL_V0.8
Version 0.7 now has support for data2sd. If you would like data2sd you will need to flash this patch in recovery: Courtesy of _that
I'm very new to the kernel compiling game so there might be some issues, although I have not run into any. It has been tested on the GRIMLOCK rom stock rooted rom, and should also work on CROMI without issue.
I'd like to thank the following:
_that
sbdags
Hundsbuah
Surdu_Petru
Faux123
untermensch
Without help and contributions from these 6 (as well as others) this would not be possible.
Kernel Source is here
Old versions of Kernel:
GRIMLOCK_KERNEL_V0.7
GRIMLOCK_KERNEL_V0.6
GRIMLOCK_KERNEL_V0.1
GRIMLOCK_KERNEL_V0.2
GRIMLOCK_KERNEL_V0.3.1
GRIMLOCK_KERNEL_V0.4
GRIMLOCK_KERNEL_V0.5
thanks for your work *thumbs up*
i hope this will be a great think in the future
Awesome! Finally a new kernel... Hope you'll add cpu / gpu OC as hunds... :good::good::good:
So to confirm, no TF300TG support in here, right, just TF300T?
Not yet. I'm waiting for asus to drop source for 10.6.2.10
Sent from my HTC One using xda app-developers app
I tested on TF300T stock rom ....very good for this moment
Send to Asus TF300T Stock and S4 mtk6589 rooted
Still in the testing phase but thanks to the source code that @untermensch release for our device it looks like a lot of the changes that he made for 4.1 work on the 4.2 kernel as well.
@hardslog
compiling sources comer error
arch/arm/mach-tegra/pm.c:1087:19: error: inlining failed in call to always_inline ‘read_pmc_wake_status’: function body not available
patch :
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -1084,7 +1084,7 @@ static int tegra_pm_enter_suspend(void)
return 0;
}
-extern inline u64 read_pmc_wake_status(void);
+extern u64 read_pmc_wake_status(void);
static void tegra_pm_enter_resume(void)
{
if (current_suspend_mode == TEGRA_SUSPEND_LP0)
Keshukas said:
@hardslog
compiling sources comer error
arch/arm/mach-tegra/pm.c:1087:19: error: inlining failed in call to always_inline ‘read_pmc_wake_status’: function body not available
patch :
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -1084,7 +1084,7 @@ static int tegra_pm_enter_suspend(void)
return 0;
}
-extern inline u64 read_pmc_wake_status(void);
+extern u64 read_pmc_wake_status(void);
static void tegra_pm_enter_resume(void)
{
if (current_suspend_mode == TEGRA_SUSPEND_LP0)
Click to expand...
Click to collapse
What are your sources and toolchains? I did not run into such a problem.
Did what you were doing work after applying the patch?
Update - OC up to 1.7GHZ
Please see OP for download link for V0.2
Also added in smartassv2 governor.
Basically how this kernel works now is as follows:
Powersave: 1GHZ
Balanced mode: 1.3GHZ
Performance mode: 1.7GHZ
Please let me know how it works for you. It seems stable for me.
I tested Antutu benchmark post result.... on performance mode
Send to Asus TF300T stock foto oc 1,7 GHz and Galati S4 Mtk6589
hardslog said:
Please see OP for download link for V0.2
Click to expand...
Click to collapse
Thank you for your work. Could you make to your kernel support for USB network card (DUB-E100 revision C dev id), as did untermensch after this message with reference to the driver.
lessio.a1 said:
I tested Antutu benchmark post result.... on performance mode
Send to Asus TF300T stock foto oc 1,7 GHz and Galati S4 Mtk6589
Click to expand...
Click to collapse
Is that a good score? I don't use Antutu lol.
BrateloSlava said:
Thank you for your work. Could you make to your kernel support for USB network card (DUB-E100 revision C dev id), as did untermensch after this message with reference to the driver.
Click to expand...
Click to collapse
Please see the OP. I have rebuilt the kernel with the commits that Untermensch made for compatibility for your network card. I hope it works. Please test and provide feedback (Version to get is 0.3.1)
Yes normaly is 13300 now 17340
Send to Asus TF300T stock foto oc 1,7 GHz and Galati S4 Mtk6589
Are you running any rom or stock?
Stock rom
Inviato dal mio GT-I9500 usando Tapatalk 4
hardslog said:
-Added support for requested USB network card (DUB-E100 revision C) - Also needs testing [V0.3.1]
Click to expand...
Click to collapse
Works fine. Thank you.
hardslog said:
-added in smartassV2 governor - more to come [V0.2]
Click to expand...
Click to collapse
I have not noticed positive aspects of its use. The frequency of a one core of processor has been continuously at the maximum and not decrease.
The minimum frequency when I use any governor not be lower 204, though I installed it in 51.
IMHO, you should pay attention to the new version of ondemand and intellidemand that is optimized for use on 4 cores.
hardslog said:
-added in smartassV2 governor - more to come [V0.2]
Click to expand...
Click to collapse
If you are not hard - add in new version of your kernel FIOPS, ROW and SIO from here
If you are going to produce a stable working kernel with overclocking the processor - should think about the temperature control. IMHO, of course. For example, Intelli_termal from Faux123.
BrateloSlava said:
If you are not hard - add in new version of your kernel FIOPS, ROW and SIO from here
Click to expand...
Click to collapse
I have already added VR, SIO and DEADLINE schedulers. They will be in the next release.
BrateloSlava said:
If you are going to produce a stable working kernel with overclocking the processor - should think about the temperature control. IMHO, of course. For example, Intelli_termal from Faux123.
Click to expand...
Click to collapse
Pretty sure Intelli_thermal from Faux123 will only work on Qualcomm based chipsets.
The smartassV2 governor I added in isn't too stable, so I'm thinking that I might remove it.
edit: BTW, Version 0.4 is up. Please see OP
SKernel
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Super Fast - Super Smooth - Super Stable - Super Reliable
- Super COOL -
SKernel was created for giving the users of "underprivileged" devices a memorable experience.
It ensures that everything is perfect from kernel side.
SKernel was created in mind, keeping these things - Speed, Performance and Stability.
None had an upper hand over the other, all were given equal importance.
After all the bits were in their right places, SKernel was born.
Initially built for the LG Optimus L5, SKernel now supports all the variants of LG Optimus L5, L7 and L3 II.
Code:
#include <disclaimer.h>
/*
* Your warranty is now void. *
* This kernel is 100% guaranteed won't eat your pet cat *
* No guaranteed this'll explode your device, be careful, follow the instructions ! *
* DON'T point at me if your alarm dies after flashing this kernel ! *
*/
Features
- Based on Linux 3.4.11 Source
- Best Compatibility with KitKat and Lollipop
- zRAM
- zCache
- zSmalloc
- KSM
- GCC Linaro 4.9.3 (2015.03) compiled
- Full Linaro Optimizations ON
- Optimized Parameters from L Speed
- USB OTG Support (You will need some thing like this)
- Overclock - to 1100/1300MHz (stable)
- Underclock - to 61 Mhz
- 800MHz Undervolt
- 402/404 MB RAM (408MB on 0.1.4)
- Google Snappy Algorithm
- ARM RWSEM Algorithm
- Dynamic File Sync
- Enhanced SELinux
- Frandom - Entropy Generator
- Some ARM v7 optimizations
- Performance enhancements
- Audio enhancements
- And much more!
Governors
- smartassv2
- interactive
- conservative
- ondemand
- smartassH3
- performance
- intelliactive
- smartmax
- wheatley
- dancedance
- interactiveX
- lagfree
-intellidemand2
Coming Soon
- brazilianwax
- savagedzen
- intelliactive
-intellidemand2
- smartmax
- wheatley
- interactiveX
- dancedance
- lagfree
I/O Schedulers
- noop
- deadline
- cfq
- bfq
- sio
- fiops
- sioplus
- zen
- vr
Coming soon
- sioplus
- vr
- zen
Bugs
- Tiny issues on L7 (WiFi issues and lags on P700 variant with some ROMs)
- You tell me
Installation
Reboot to recovery
Flash the zip
wipe cache and dalvik (optional, but recommended)
Reboot
Enjoy SKernel!
It is suggested to read my reserved post's or at least the FAQ so that you don't run into trouble!
Downloads:
Main Download: Mediafire
Mirror: AndroidFileHost
Thanks to:
#TeamHackLG - For their base CM11 kernel source!
@F4uzan - For all his help (that's a lot!), and most importantly for inspiring me to build a kernel from source!
@Paget96 - For L Speed Parameters!
@Caio99BR - My new friend and for his help!
For Devs/Source
Source Code for SKernel
You are free to use my kernel in your ROMs, as long as you give proper credits!
The Kernel Source is covered under GPL v2
Donations
I have given a large chunk of my time and bandwidth behind this kernel. If you like my work and would like to help me pay my internet bills, then please consider donating. If you want to donate to me, just send me a PM! Every penny counts!
Thank you!
XDA:DevDB Information
SKernel Pwoli Edition, Kernel for the LG Optimus L5
Contributors
skyinfo, Caio99BR
Source Code: https://github.com/shskyinfo/SKernel
Kernel Special Features: CPU - Overclock, Underclock and UnderVolt. Entropy - Frandom. Governors - 10+. I/O - 9. Includes optimized Algorithms. USB OTG. And much more!
Version Information
Status: Stable
Current Stable Version: Milestone 6
Stable Release Date: 2015-05-08
Current Beta Version: Milestone 8
Beta Release Date: 2015-08-23
Created 2015-03-19
Last Updated 2015-08-23
Place Holder #2: Information on Builds/Releases
Current Status of Builds
Paused, busy with life
Uploaded Milestone 8 for all variants!
Whats new in next release
I'm out of ideas, suggestions welcome!
Next Release
Milestone 9 - ?/09/15
Testers - A Big Thanks!
@Leon FH - L7 P705
@Paget96 - L7 P705
@WinterR - L7 P700
@RolanDroid - L5 E610
jetei (4pda) - L5 E610
Place Holder #3: Changelogs
Milestone 8 - 23/08/15
5000+ commits, so impossible for changelog
Milestone 7-T - 15/07/15
Mostly a test version (hence the T)
Find changes on github
Milestone 6 - 08/06/15
Added BLN (creds: @aidasaidas75) you need BLN supported ROM
USB Force Fast Charge added
I/O Boost v2 added
Huge ext4 fixes
Using LZ4 Compressor (creds: @Caio99BR)
Using -Ofast Optimizations
MDP and ADSP updated for L7
No more black screen/lock screen lag on L7
Overclock fixed for L7 (creds: @Caio99BR)
Added Kernel Mode Neon
using msm_ion instead of ion
add NEON accelerated XOR implementation
adaptive vfs cache pressure
updated intelliactive governor
And more, visit GitHub
PREFINAL - 04/05/15
Updated BFQ to version7-revision7 (v7r7)
Using latest Linaro 4.9.3 (2015.03) compiler
Using new modules
Full Linaro optimizations ON
Optimized build flags
Milestone 4 - 26/04/15
Fixed WiFi for P700 variant without sacrificing NFC, thanks @Caio99BR
New modules for P700 variant
Mod version disabled for P700
Added intellidemand2 governor
Some SELinux improvements
Change flash type for L7, now same as L5
Milestone 3 - 06/04/15
Using Google's GCC 4.8 compiler now
Fully fixed and added Dynamic File Sync, thanks @Caio99BR
Using new modules generated from new compiler
Added compiler optimization flags
Fixes for msm_fb
Using new wlan.ko for L7 from Ron G
Using seperate boot.img for both variants of L7
Milestone 2 - 23/03/15
Updated cputime.h - for adding incompatible governors
Speed up ext4
SELinux updates
Revert ADSP to old size for L7
Using latest wlan.ko from THLG for L7
Updated freezer.c to not freeze tasks killed by OOM killer
mm.h updated from Torvalds
Remove duplication of jobs
Updated int_sqrt()
Some logical fixes in files
Using latest generated scsi and libra modules
Visit GitHub for more!
Milestone 1.1 - 20/03/15
Update is only for L7 [P700/P705]
Added Frandom Entropy
Updated ADSP and MDP sizes
More RAM available now
Added new frequencies
Overclock to 1300MHz, Underclock to 61MHz
Using new and optimized ARM RWSEM Algorithm
Milestone 1 - 19/03/15
Full Compatibility with Lollipop 5.0.x
Added Google Snappy
Added USB OTG
Initial Support for L7 [P700/P705]
Optimized some parameters, taken from L Speed
Only major changes shall be listed here in a user understandable way.
For in depth changes, visit my GitHub!
Changelogs to previous versions can be found here - SKernel Original Changelogs
Place Holder #4: FAQ
Q: Will this conflict with any mod I'm using?
A: As long as it doesn't have any entropy related stuff, its okay. Since the kernel already comes with an inbuilt entropy generator, it will conflict with the ones from mod, causing a poor, stuttered performance!
Q: Deep Sleep isnt working for me, Google Services causing wake-locks, what to do?
A: Go to settings, Privacy, Privacy Guard, All apps, long press Google Services, and deny/disable wake-locks! (Thanks to @Paget96 for the solution)
Q: Which version should I install?
A: (For L5)If you're on CM11 Beta 9.2+ or a ROM based on its sources, then use latest beta release!
Else, use Beta 0.1.4
However, Beta 0.1.4 does not have latest features of SKernel.
Beta 0.1.4 has only over clock, under clock and undervolt (on 800MHz)
Use only if your current ROM isn't CM11 Beta 9.2+ based!
(For L7) Use the latest ROM available, or you can test on other ROMs but you may face some issues. There is absolutely no harm in testing tho!
Q: Why am I getting flickers?
A: You're on a wrong version of kernel, ie, kernel is slightly incompatible (due to new KK ion), try switching between Beta 0.1.4 and latest release!
Q: Where can I find Beta 0.1.4
A: Go to Original SKernel Thread. It can be found in older releases on mediafire
Q: Which version should I flash
A: Flash kernel to respective model number (E610/E612)
Q: Which frequency is the safest
A: The default frequency, 800MHz, is the safest!
But, there's no harm in overclocking upto 1100MHz.
You MAY face some issues on 1100MHz, but 1050MHz is stable as 'rock'!
Q: WiFi doesnt work for me
A: Use the kernel I made for CyanHacker ROM (available on the thread)
Reserved
Last one!
Hohoo, nice dude
I like that new features.
Keep working
Regards
Paget96
How about Skernel for stok rom
Woahhhhhh awesome. Already can feel the smoothness.
I can also see 2 test builds for L7 and E610 builds too!!
Great work!!
Sent from my IdeaTab A2107A-F using XDA Free mobile app
droidxx9 said:
Woahhhhhh awesome. Already can feel the smoothness.
I can also see 2 test builds for L7 and E610 builds too!!
Great work!!
Sent from my IdeaTab A2107A-F using XDA Free mobile app
Click to expand...
Click to collapse
I meged same stuff(even more) to mine kernel no one felt difference.........Plus i cant see any audio related commits..
Will test 4.1 p705 work on p700?
RaMiz13 said:
Will test 4.1 p705 work on p700?
Click to expand...
Click to collapse
Yes
But kernel for P705 doesnt have nfc that is only difference
But I think that you don't use it
Regards
Paget96
Paget96 said:
Yes
But kernel for P705 doesnt have nfc that is only difference
But I think that you don't use it
Regards
Paget96
Click to expand...
Click to collapse
I already flashed it and yes I do not use NFC. ?
SMILEVN said:
How about Skernel for stok rom
Click to expand...
Click to collapse
not anytime soon...
maybe after 3-4 months only
droidxx9 said:
Woahhhhhh awesome. Already can feel the smoothness.
I can also see 2 test builds for L7 and E610 builds too!!
Great work!!
Sent from my IdeaTab A2107A-F using XDA Free mobile app
Click to expand...
Click to collapse
thanks!
aidasaidas75 said:
I meged same stuff(even more) to mine kernel no one felt difference.........Plus i cant see any audio related commits..
Click to expand...
Click to collapse
already sent you link
RaMiz13 said:
I already flashed it and yes I do not use NFC.
Click to expand...
Click to collapse
thanks for testing, hows it?
do you get any issues on ril?
Deepsleep?
Kernel is good but its not smooth as I hoped it will be. Maybe that's just the p705 version on p700 not working well. And how do I chech if there is deepsleep or not?
Edit: BTW I am on last Imers CM11 3152015
Ok my friend @skyinfo
Kernel is good, I like it, here is full review.
I saw that there is 400.01mb of ram instead of 402.98mb (i think)
There is no deep-sleep
Freqs going to 1008mHz there is no oc, also I don't see 96mhz freq which is mentioned in first post.
I like that kernel have frandom entropy, much faster I check entropy levels with my L Speed mod, and goin much faster
Also, device have lags more than with default cm11 kernel
Wifi work fine
RIL is there, work good, both 2g and 3g working, bluetooth working, everything is working
I know that this is little things, also I know that you will fix it today
And I know what are you trying to say that THLG update L5 more than L7
Waiting for the next release
This zip in attachment is for p705 users which use the latest CM11 by imer, this is default kernel
Thanks sky again for your awesome work
I know that you will fix all today
Regards
Paget96
new version out for L7, hopefuly better!
Milestone 1.1 - 20/03/15
Update is only for L7 [P700/P705]
Added Frandom Entropy
Updated ADSP and MDP sizes
More RAM available now
Added new frequencies
Overclock to 1300MHz, Underclock to 61MHz
Using new and optimized ARM RWSEM Algorithm
Download from mediafore!! P700 also added!
Sorry L5 guys, no update for us, we are lareday enjoying the kernel at 99% of its potential, now let me bring L7 to speeeeeeeeeeed!
is this working on imer cm11 ???
aidasaidas75 said:
I meged same stuff(even more) to mine kernel no one felt difference.........Plus i cant see any audio related commits..
Click to expand...
Click to collapse
I did say yiur kernel was good!!
Jobloxx said:
is this working on imer cm11 ???
Click to expand...
Click to collapse
Yes!
Sent from my IdeaTab A2107A-F using XDA Free mobile app
Everything is good, i feel my phone smoother little
But i got screen freezed in cm11 v6 by Plamb1r
Very lagy on my p700 and wifi not working
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
God's Kernel-True God Of Kernels
ABOUT God's Kernel:
AudioGod said:
God's Kernel is a open source kernel designed to unleash the power of Redmi 1S. The Aim of This project is to give a most stable ,power-full,ultra-fast kernel with Max Battery Life which is required for every Redmi 1S user.
Click to expand...
Click to collapse
DISCLAIMER:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Kernel currently supports
all KK LP MM CM AOSP and MIUI based roms
CHANGELOGS
DOWNLOAD LINKS:
GK_ARMANI_13052016_2047.zip - 6.67 MB
GK_ARMANI_MIUI_13052016_2102.zip - 7.38 MB
Older builds
INSTALLATION STEPS:
Minimum Requirements To Install God's Kernel:
Recommended Custom Recovery TWRP and a Rooted Device
Installation Procedure:
Boot Into Recovery Mode
Dirty flash the rom you are using (if needed gapps too)
Flash provide Kernel Zip
Flash UKM zip http://forum.xda-developers.com/redmi-1s/development/zip-synapse-universal-kernel-manager-r1-t3282133
Wipe Cache and Dalvik
Reboot To System
Follow Us on :
Google+
https://plus.google.com/communities/105868185017241678214
Huge Thanx to my tester :
@doylefermi
@vjraj (i still hate you for the R3 leak)
@deadpool01
@Megamite
@vedantkamlaskar
@TheStrix
n last but not the least @@Biplov Biswas
XDA:DevDB Information
[KERNEL][MM/LP/KK/MIUI][CM/AOSP][13-05-2016] God's Kernel R9, Kernel for the Xiaomi Redmi 1S
Contributors
Tarun93, fefifofum,rebelos,luffy.d, onano,Kra1o5 and all the other co devs
Source Code: https://github.com/tarunkapadia93/gk_armani/
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R9
Stable Release Date: 2016-05-13
Created 2015-10-03
Last Updated 2016-05-13
Change log:
God's Kernel-R1
Built with UBERTC 6.0 and other tweaks.
Alucard Hotplug
USB Fast Charging
Franco's Custom thermal
Faux Sound
KCAL with the latest update
Fsync Disable
DT2W
Kexec[Multi Rom Support] latest update
CPU OC to 1.7Ghz
Selinux Permanently Permissive
General Optimization & Tweaks
God's Kernel-R2
rebased on LNX.LA.3.5.2.2.2-00510-8x26.0 (Xiaomi's Official Kikat kernel)
alucard updated
powersuspend hooks fixed
added sio i/o
add intellidemand intellimm intelliactive
USB force fast charge limit raised from 1000 mA to 1500 mA
NEON optimized kernel
exFAT support
LP and KK WiFi prima drivers updated to LA.BF.1.1.1_rb1.26 from prima: update to LA.BF.1.1.1_rb21
added MIUI support
DT2W and S2W+S2S removed for this release
God's Kernel-R3
huge cleanup n patching
zzmove smartmax elementalx yankactive alucard impulse
MM compatible
interactive governor updated
i/o scheds tuned
switched from alucard to bricked hotplug
replaced franco's thermal solution to simple thermals by sultanxda
selinux will be permissive on boot but can we changed
KSM added back
removed the **** old mulitcore powersavings which never worked right xD
God's Kernel-R4
Based on the latest msm8226 Caf tags thanx to @fefifoum
added a few governors (nightmare, darkness)
added new I/O scheds (FIFO SIOPLUS TRIPDROID)
tuned all the governors n i/o for better performance n smoothness
alucard_hotplug added back and removed bricked
LMK tune up
VFS tune up
allow userspace config of simple_ondemand
Native D2W
Adreno idler
KCAL updates
freezer patches
bam_dmux patches
seccomp patches
sched patches
God's Kernel-R5
Kexec removed (its not working ATM for any armani kernel)
Thermals tuned
Flicker fix
Splash add
Unbalanced IRQ on boot fixed
Zram updates
Governors tuned
GK logo added thanx to @ramashish Mishra for providing me with the logo and the banner
God's Kernel-R6
using the latest caf tags LA.BF.1.1.3-00910-8x26.0
synced with armani-dev's latest changes
Backport Adaptive LMK from Linux 3.10
Kexec added back
features exposed to user
-gentle fair sleepers
-arch power
-fsync
-software crc
removed MC powersaver again(i never really liked it xD)
Power efficient work-queues added back
added few more wakelock fixes
a few governors added xD
added a bricked msm_hotplug intelli plug
alucard synced and merged with the last sources from alucard24
Random32 updates
Zram updates
Powersuspend removed updated to State Notifier
DT2W removed for this release
VM reclaim
High performance sound
KSM
adreno idler disabled by default (enable if you wanna save some battery)
-Ofast graphite -ffast-math and karit optimization
lots of more stuff
God's Kernel-R7
-used the latest caf tag LA.BF.1.1.3-01010-8x26.0
-GPU OC fixed
-Simple Algo for nsn_aderno_tz (disable idler if you wanna enable this)
-switched back kk touch drivers
-MIUI hardware key fixes
-Hotplug
-alucard hotplug
-msm_hotplug (enabled by default)
-Governors
-alucard
-darkness
-elementalX
-HYPER
-impulse
-nightmare
-smartmax
-yankactive
-zzmoove
-new thermal solution
-XZ compression
-huge interactive updates to match up with the latest codes
-ondemand clean up
-F2FS updated from mainline Linux 4.4
DT2W added back
fast charge clean up n simpler implementation
fixed charging issues from faced in R6
major clean ups in kernel :victory:
God's Kernel-R8
- merged the latest LA.BF.1.1.3-01210-8x26.0 caf tag
- clean up n added builtin synapse and UKM access (no more flashing UKM )
- removed interactive updates for now
- updated the governors
-thermals retuned
- lots of minor tweaks and tune ups
- f2fs fix ups
God-R9
-merged the latest LA.BF.1.1.3-01510-8x26.0 caf tag
-retuned thermals and LMK
-interactive patches updated
GET LOGS IF YOU WANNA COMPLAIN ABOUT SOMETHING OR ELSE I AINT LISTENING TO ANY THING YOU SAY
here is a thread to understand how to get them
http://forum.xda-developers.com/showthread.php?t=2185929
Another kernel :laugh: awesome!
Waiting for download links gonna try it.
Thanks man..waiting for the link to test
i am really waiting for the kernel which will unleash the power of redmi 1s like 1.8ghz oc+650mhz gpu.
thanks for your hard work. thanks for you appreciation.
really looking forward for the kernel.......... thanks alot @Tarun93 your works have been tremendous......
Small query will it be compatible with miui 7???.
slst said:
really looking forward for the kernel.......... thanks alot @Tarun93 your works have been tremendous......
Small query will it be compatible with miui 7???.
Click to expand...
Click to collapse
working on that part mate
Tarun93 said:
working on that part mate
Click to expand...
Click to collapse
one request tarun pls dont limit the charging current.its very annoying to wait for 3hrs+ to charge mobile full.if you can increase then go for it higher than 1amp
Does it support f2fs, or i have to re-format data?
Tapatalk-kal küldve az én HM 1SW-el
*brings out the grapite sheets* we need to cnc a cool case
pls use latest optimization to give more ram and less ram usage to be used by system..
another custom kernel for our little beast.
does it compatible with miui?
or only cynogen based only.
thanks
delang said:
another custom kernel for our little beast.
does it compatible with miui?
or only cynogen based only.
thanks
Click to expand...
Click to collapse
build2 will be miui supported
Great work pal. Can't wait for links to be up.
Sent from my HM 1SW using Tapatalk
@Tarun93 what app u recomend to control this kernel?
A small review about the kernel..
The kernel is performing very good considering the initial release.
Using this kernel with latest temasek ROM.
Performance is good and no lags for normal use.
Multitasking performance is also good with few hiccups here and there.
Gaming performance is good.Able to play asphalt 8 at high settings with minor or no lags at stock clock speeds.
Battery performance ..... Yet to check...will update after 2-3 cycles
The only problem is that I'm unable to set max frequency to 1689 MHz through kernel auditor app.
It is stuck at 1401 MHz.
I request @Tarun93 to look into the issue.
Keep up the gud work!!
Oops double post
UltimateBlade said:
@Tarun93 what app u recomend to control this kernel?
A small review about the kernel..
The kernel is performing very good considering the initial release.
Using this kernel with latest temasek ROM.
Performance is good and no lags for normal use.
Multitasking performance is also good with few hiccups here and there.
Gaming performance is good.Able to play asphalt 8 at high settings with minor or no lags at stock clock speeds.
Battery performance ..... Yet to check...will update after 2-3 cycles
The only problem is that I'm unable to set max frequency to 1689 MHz through kernel auditor app.
It is stuck at 1401 MHz.
I request @Tarun93 to look into the issue.
Keep up the gud work!!
Click to expand...
Click to collapse
Firstly thnx for the stats n review
For multitasking I will recommend u tune the low memory killer to aggressive or very aggressive
Use kernel auditor for all the tweaking and for people who like to tweak a step further I recommend aero kernel control but u have to add the things manually by adding the sysfs path in the misc tab
As for the freq that's a know bug in kernel auditor that sometime there is a freq glitch and if u mean it was showing the 1689 step n u set it yet it was going back to 1401 the. Pls just calm it's normal as the thermal solution is doing it's work
*EDIT*
a request to.all the users pls do not set DT2W On boot via any app it will give u a non responsive screen on boot up I will fix it in the second build with the addition. To the miui support :thumbup:
Sent from my HM 1SW using XDA mobile app
Tarun93 said:
Firstly thnx for the stats n review
For multitasking I will recommend u tune the low memory killer to aggressive or very aggressive
Use kernel auditor for all the tweaking and for people who like to tweak a step further I recommend aero kernel control but u have to add the things manually by adding the sysfs path in the misc tab
As for the freq that's a know bug in kernel auditor that sometime there is a freq glitch and if u mean it was showing the 1689 step n u set it yet it was going back to 1401 the. Pls just calm it's normal as the thermal solution is doing it's work
*EDIT*
a request to.all the users pls do not set DT2W On boot via any app it will give u a non responsive screen on boot up I will fix it in the second build with the addition. To the miui support :thumbup:
Sent from my HM 1SW using XDA mobile app
Click to expand...
Click to collapse
Thanks dude!!! I was about to report the d2w bug.And one more thing ,the phone is getting very hot while charging in switch off mode.And can u please suggest screen color cal values for more amoled like color production.
UltimateBlade said:
Thanks dude!!! I was about to report the d2w bug.And one more thing ,the phone is getting very hot while charging in switch off mode.And can u please suggest screen color cal values for more amoled like color production.
Click to expand...
Click to collapse
Which rom ???
and for me 240 245 255 works decent brightness n contrast at 130
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a port of Optimus Kernel by Flashhhh for Titan
Make sure to thank him - Here
I present to you my own kernel which has been built with many optimizations and tweaks. This kernel will work ONLY on Marshmallow roms(Not for stock roms) only.The main aim is to provide a stable kernel with optimizations.
I hope you all will like it
Custom Kernel Features:
- Updated to latest cm-13.0 Sources
- Compiled With Custom UBER 5.2.1 Toolchain
- Compiled With -O3 & Graphite Flags
- Additional many optimization flags
- Compiled With Cortex A7 Tweaks
- ARM v7 Optimizations
- Intelliplug
- Mpdecision hotplug driver(Using custom powerhal by CM)
- GPU underclock/overclock(Min:100 MHz & Max:533 MHz)
- Add dev/frandom
- Added Support for Kernel Neon Mode
- Enabled Pipe Flag
- Adreno Idler Algorithm
- PowerSuspend Driver v1.5
- Add BioShock/DanceDance Govs
- Added SmartMax/LionHeart Govs
- LCD Kcal Control by Savoca
- Faux's Sound Control
- Optimized ARM RWSEM Algorithm
- Optimized Square Root Algorithm
- LMK tweaks
- block: disable add_random
- Enable unaligned capability for ARM
- CpuFreq and CpuBoost Optimizations
- Disabled Gentle Fair Sleepers
- Enabled Many TCP Congestions
- Added SIO,VR & ZEN IO Scheduler
- Sched & Mutex Tweaks
- Pushed Read Ahead value to 512
- Use your android device as USB Keyboard/Mouse
- Enabled FSync by default
- Optimized Slub
- VFP HardFloat
- Power Efficient WorkQueues
- Reclaimed RAM from loggers
- Power Efficient WorkQueues
- Kexec patched
- Many more things (Check Github)
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Pls Read This before flashing:
You need ROM's default kernel before flashing this, as this kernel makes use of AnyKernel 2 by @osm0sis. Make sure you have it otherwise clean flash the kernel with the rom to avoid any issues.(At least dirty flash rom+kernel) Credits to @attack11 for some part of install script.Read FAQ's and changelogs in 2nd post. THIS KERNEL COMES FINE TUNED OUT OF THE BOX. Some useful battery saving tipshttp://forum.xda-developers.com/showpost.php?p=64850959&postcount=198
DOWNLOADS:
Grab it here
#ROM infos on the 4th post, be sure to check it
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. (optional) Wipe Dalvik Cache and Cache partitions
5. Reboot and enjoy!
PLS DON'T MIRROR THE LINKS
Recommended app:
Synapse or Kernel Adiutor
Flash UKM.zip from the below link: (credits to @apb_axel)
http://forum.xda-developers.com/android/software/zip-synapse-script-universal-kernel-t2736986
And then install synapse from play store.
I would like to say thanks to @flashhhh for allowing me to port the kernel. Also a big thanks to @faux123 @YoshiShaPow @fermasia @Alberto97 @TeamMex @Quasar @Mazda @FabioSan @Blechdose @neobuddy89 @RenderBroken @savoca @deadman96385 @pinkflozd @alin.p @Cl3Kener @Shivam Kuchhal @cust0mworx for the awesome graphics and CYANOGENMOD TEAM
and MANY MORE...
XDA:DevDB Information
Optimised CM and Viper Kernel for Titan, Kernel for the Moto G 2014
Contributors
Vatsal
Source Code: https://github.com/koradiavatsal/Viper-kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v6
Stable Release Date: 2016-01-15
Created 2015-12-02
Last Updated 2016-01-17
FAQ
F.A.Q. - Read this before complaining!
1. My phone exploded, HELP!
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Paste it on hastebin.com and link it on your post. Logcats are useless for Kernel purposes, don't bother posting them.
2. This kernel works on Y or X rom?
A: Works on all CM13 based roms. Not for stock roms!!
3. OMG BATTERY SUCKZ, ITZ DEAD IN 45 MINUTES, HELP!
A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
4. How do I flash this?
A: Read the OP, theres a reason why I added instructions on it.
5. What is a data loss? Did I just had one?
A: Data loss is simply having the connection cut for X periods of time, usually few seconds. Grey bars means the device is not connected to Google services for some weird reason, but you'll still have internet connection.
6. OP is arrogant, I'm gonna call the Internet Police?
A: Deal with it.[/QUOTE]
Info
Many thanks to showp1984 for this info
What is msm_mpdecision?
100% kernel based multi core decision! (should cpu1/2/3 be online or not?)
This is a special version modded by neobuddy Plus the idle frequency and some load thresholds have been adjusted by me.
Some Configuration:
startdelay = time until mpdecision starts doing it's magic (20000)
delay = time between checks (130)
pause = if something else plugs in the cpu, fall asleep for 10000ms (10 secs)
scroff_single_core = if the screen is off, don't plug in cpu1/2/3. Additionally: Unplug all cpus except cpu0 when screen is turned off (1)
enabled = enable(1) or disable(0) mpdecision. This does not affect scroff_single_core!
min_cpus = min cpus to be online, cannot be < 1. Default: 1
max_cpus = max cpus to be online, cannot be > 4. (if you set it to 2 and min_cpus to 1 you will basically have a dualcore) Default: 4
idle_freq = a value against that will be checked if a core +/- is requested. (600 MHz)
mpdecision's input event boost, aka project butter
This will boost your min cpu speed if you touch the screen or press a button and gives you full control.
In those events the min cpu freq will be risen to a predefined value on every online cpu. This boosts overall reaction times and smoothness a lot. (works similar to the qcom mpdecision binary)
So here's the surprise
Hello folks,
I am using my own optimised builds since initial phase of CM13. Rom and kernel are both build with Uber 5.2.1 and few more optimisations on the kernel (It's same like in the first post). The Uber Toolchain developer said due to new neon optimisations in Uber toolchains, the battery life has increased by 25%. Well using since a long time, I almost get 6hrs+ SOT(Ofcourse will vary with you) and a mindblowing performance. So I am going to provide weekly Uber CM13 builds with optimisations(It is somewhat close to pf-cm by Diamond Bond). The people interested, could use it , It will stay really close to CM and few picks here and there. I would really appreciate feedbacks I am using the build posted and it's really rock stable.
Download :-
All optimised buildshttps://www.androidfilehost.com/?w=files&flid=44644
Installation :-
A clean wipe is mandatory.
Wipe cache,dalvik cache, system, data
Flash the zip
Flash gapps ( I use slim zero gapps)
Reboot, Enjoy!
FAQ:-
Differences between UBERTC and other Toolchains
Changelog for the 1st December Toolchain updates
Regards
Awesome work brother
Vat Bro
This is cool.
Good going
Keep it UP
Check #4th post for the Optimised cm13 builds, Really didn't feel like making a new thread..
Is it fully functional, Like Working mobile data , camera Themes Etc... Is there any way you can provide delta updates to ur rom instead of downloading the whole file.. I'm currently using cm 13 which has no Major issues as of now , so is this rom(dec 2 build) Recommend or should I wait for future builds ?
Thanks IA ��
james11705 said:
Is it fully functional, Like Working mobile data , camera Themes Etc... Is there any way you can provide delta updates to ur rom instead of downloading the whole file.. I'm currently using cm 13 which has no Major issues as of now , so is this rom(dec 2 build) Recommend or should I wait for future builds ?
Thanks IA ��
Click to expand...
Click to collapse
Everything working same as CM, No OTA/delta updates sorry..
Vatsal said:
Everything working same as CM, No OTA/delta updates sorry..
Click to expand...
Click to collapse
Thanks for the quick response , I'll try it out and let you know .., . And thanks for the rom ��
I can't install your kernel over CM's stock kernel. there's an error with the updater-script. I am using the 02/12 CM13 build, how can I help?
(zip placed on the root of internal storage)
Vatsal said:
Everything working same as CM, No OTA/delta updates sorry..
Click to expand...
Click to collapse
Does that mean XT1068 users with one sim cannot use this?
Sent from my Moto G 2014 using Tapatalk
Vidhanth said:
Does that mean XT1068 users with one sim cannot use this?
Sent from my Moto G 2014 using Tapatalk
Click to expand...
Click to collapse
I guess thats fixed in cm as well
Vatsal said:
I guess thats fixed in cm as well
Click to expand...
Click to collapse
Sweet. Have you tried it though? Cuz I can't risk 310 MB lol
Sent from my Moto G 2014 using Tapatalk
Vidhanth said:
Sweet. Have you tried it though? Cuz I can't risk 310 MB lol
Sent from my Moto G 2014 using Tapatalk
Click to expand...
Click to collapse
I have msim
mpeL said:
I can't install your kernel over CM's stock kernel. there's an error with the updater-script. I am using the 02/12 CM13 build, how can I help?
(zip placed on the root of internal storage)
Click to expand...
Click to collapse
Installs really fine here, can someone else confirm the issue?
Vatsal said:
I have msim
Click to expand...
Click to collapse
Thanks man. I'll try it asap. I always wanted to be on 6.0 but the battery life held me back. But now that u have said its increased by 25%, I'll have to try it
Sent from my Moto G 2014 using Tapatalk
Vatsal said:
Installs really fine here, can someone else confirm the issue?
Click to expand...
Click to collapse
Same here , I tried flashing this Kernel over ur rom(didnt know it already had this kernel) , I tried mounting n unmounting system, still got error updating binary...
james11705 said:
Same here , I tried flashing this Kernel over ur rom(didnt know it already had this kernel) , I tried mounting n unmounting system, still got error updating binary...
Click to expand...
Click to collapse
Yes rom has the same kernel inbuilt. I'll reupload kernel.
EDIT : Uploaded Download
Please test this and tell me
Vatsal said:
Yes rom has the same kernel inbuilt. I'll reupload kernel.
EDIT : Uploaded Download
Please test this and tell me
Click to expand...
Click to collapse
Still the same error, tried it on crdroid 6.0 also .. Other than the kernel, the rom is awesome, better than cm 13 official in performance n also is bAttery Friendly ?
Some amazing stats with quiet heavy use
Sent from my Moto G 2014 using Tapatalk