TWRP "unable to mount /data" - One (M8) Q&A, Help & Troubleshooting

I was going to flash a new rom, but every time I try to wipe, I get a failed message. I doesn't wipe dalvik cache and also gives me the message above (TWRP "unable to mount /data"). Anybody know how to fix this.

Did you try to factory reset in bootloader (corrupts internal memory on modded phones, so don't do it).
Try connecting to a Window PC, find the device on Device Manager and format the internal memory.

redpoint73 said:
Did you try to factory reset in bootloader (corrupts internal memory on modded phones, so don't do it).
Try connecting to a Window PC, find the device on Device Manager and format the internal memory.
Click to expand...
Click to collapse
No, I didn't try factory reset in bootloader, looks like I'll have to format. Formatting in TWRP is fine right? I don't have to do it on the computer?

09eric09 said:
No, I didn't try factory reset in bootloader, looks like I'll have to format. Formatting in TWRP is fine right? I don't have to do it on the computer?
Click to expand...
Click to collapse
If TWRP can't mount it, I don't think it will be able to format it. I'm not sure formatting by PC will work either, but its worth a try.
A more complicated solution was posted here: http://forum.xda-developers.com/showpost.php?p=54885875&postcount=23
But I can't personally vouch for it, so use your discretion. I've seen this issue crop up a few times now, you would think there was a more uniform solution by now . . .
---------- Post added at 01:36 PM ---------- Previous post was at 01:33 PM ----------
My suggestion to just connect to PC and format via Device Manager worked for this guy: http://forum.xda-developers.com/htc-one-m8/help/im-to-die-fix-t2852003/page2
So hopefully, you will have the same luck.

redpoint73 said:
If TWRP can't mount it, I don't think it will be able to format it. I'm not sure formatting by PC will work either, but its worth a try.
A more complicated solution was posted here: http://forum.xda-developers.com/showpost.php?p=54885875&postcount=23
But I can't personally vouch for it, so use your discretion. I've seen this issue crop up a few times now, you would think there was a more uniform solution by now . . .
---------- Post added at 01:36 PM ---------- Previous post was at 01:33 PM ----------
My suggestion to just connect to PC and format via Device Manager worked for this guy: http://forum.xda-developers.com/htc-one-m8/help/im-to-die-fix-t2852003/page2
So hopefully, you will have the same luck.
Click to expand...
Click to collapse
Weird, I booted into recovery one more time, and the problem is gone. Hopefully I won't have to deal with it again. Thanks for the thread anyway, I'll keep that bookmarked.

Problem esta have someone help my of the solution would be very grateful

fabrizio_botto said:
Problem esta have someone help my of the solution would be very grateful
Click to expand...
Click to collapse
IN TWRP, select Wipe, and pick the option to Format Data. See if that helps.

Install CWM recovery instead. Go to the Mount and Storage page, and choose "format /data and format /data/media" option at the bottom of the list of options. This option doesn't require CWM to try and mount the partition first (which would fail due to encryption), but just does a straight format. After this, you can install TWRP and flash a new ROM again!

redpoint73 said:
Did you try to factory reset in bootloader (corrupts internal memory on modded phones, so don't do it).
Try connecting to a Window PC, find the device on Device Manager and format the internal memory.
Click to expand...
Click to collapse
please, how do i format the internal memory? I have found my device on the device manager.

Denclen said:
please, how do i format the internal memory? I have found my device on the device manager.
Click to expand...
Click to collapse
You haven't stated what your specific issue is, or any details about your phone (CID, Android version, etc.).
If you have TWRP installed (which corresponds to the original topic of this thread), you can format the internal storage by going to the TWRP "Wipe" section and tapping the button "Format data". This fixes many cases of corrupted internal storage. But you haven't stated what your problem is.
If that doesn't work, on your PC, you should be able to format the internal storage like any other drive. At least that worked for the person I quoted over 2 years ago (Post #4 above). Hard to remember such details from so long ago.

i have ****ed up everything on my phone
redpoint73 said:
Did you try to factory reset in bootloader (corrupts internal memory on modded phones, so don't do it).
Try connecting to a Window PC, find the device on Device Manager and format the internal memory.
Click to expand...
Click to collapse
now my issue is i cant install any custom rom or cant wipedalvik or cahe from my twrp plus i have no os installed on my ht one m8 pls help and i think so i have factory reset on my bootloader as well

jeetuda said:
now my issue is i cant install any custom rom or cant wipedalvik or cahe from my twrp plus i have no os installed on my ht one m8 pls help and i think so i have factory reset on my bootloader as well
Click to expand...
Click to collapse
Whoa! Just slow down, take a breathe, spend a few more minutes describing your issue. Otherwise, it makes it difficult (impossible?) to help you. One jumbled run-on sentence isn't going to help matters. It doesn't really take much more energy or time to type proper sentences (get to a real keyboard, if you need to). But the way you've posted, certainly makes it hard to understand what you are trying to tell us. Also need a lot more details:
How exactly did the problem start? Did you just recently install TWRP, or has it been on the device for a while?
What version number TWRP?
What happens when you try to install a ROM, or wipe cache/Dalvik in TWRP (outcomes, specific error messages, etc.).
How exactly did you come to have no OS?
Also, do fastboot getvar all, and post the results (delete IMEI and serial number before posting).

Related

System Restore / Fix booting loop

Sprint Logo repeating and repeating on you? Mine was too, here is a set of instructions that even a n00b like myself can follow to fix that. We'll simply be restoring the system software/ROM on your phone. There are other instructions listed, but don't include step-by-step instructions.
Keep in mind that this requires bubby's recovery, which is the ACS version. You can not mount USB on other recoveries (yet).
Boot into CWM
(Hold down Power and Up arrow until it appears)
Connect your phone to your computer with the data cable
Go to mounts and storage
Then mount sd card
Then do mount usb storage (second to last option)
and download the files linked inside this post:
http://forum.xda-developers.com/showthread.php?t=1272186
unzip it into a folder in the following location on the root of the phone's sd card:
/clockworkmod/backup/(any folder name)
so it would look like clockworkmod/backup/folder/ (files)
This is IMPORTANT, it must be in clockwordmod, then backup, then ANY folder name. If you leave the files in just "backup" it will give an error no files found.
Then do a wipe your data/factory reset
Then do a wipe cache
Then go to the backup and restore menu
and then the restore, will be whatever you named the folder that you unzipped the files to.
Let it finish, choose reboot and you should be good to go!
If you want to avoid losing your data in the future, follow these steps to make a full system backup as often as you'd like:
go back into cwm, goto the backup and restore menu again
then press backup
You can keep multiple backups
Again, I take no credit for this, just passing along the information. Hope this saves someone else's day!
All the credit goes to kse91holydiver, he helped me, now I'm trying to pass along the instructions to others who may be in the same spot.
Double post ? maybe
Also, you have to be on bubby's recovery, which is the ACS version. You can not mount USB on other recoveries yet.
http://forum.xda-developers.com/showthread.php?t=1272186
that link is in OP brochacho. This is just a more noob friendly version of doing everything.
kse91holydiver said:
that link is in OP brochacho. This is just a more noob friendly version of doing everything.
Click to expand...
Click to collapse
You should put "For Noobs", or "Noob Friendly", or "Idiot Proof" in the thread title so people don't think you're double posting.....Bromigo.
12MaNy said:
You should put "For Noobs", or "Noob Friendly", or "Idiot Proof" in the thread title so people don't think you're double posting.....Bromigo.
Click to expand...
Click to collapse
+1.. This is turning into quite the "Bromance" Haha
thanks a lot...this worked perfectly for me!
zayin101 said:
+1.. This is turning into quite the "Bromance" Haha
Click to expand...
Click to collapse
Lol
10char
noob
first of all i am a noob. i followed the steps perfectly but i am not sure how to access the internal memory from my PC although i have CWM in usb mount mode. please help so i can put the file on my phone
I am also having an issue getting my pc to show the phone as a mass storage device so I could put the recovery file on the phone, I have tried both bubbys kernel which does not have clockwork mod and zedomaxV3 and when I mount usb storage though clockwork mod I get nothing on my pc so I am unable to put the recovery file on my phone. please help
---------- Post added at 04:00 PM ---------- Previous post was at 03:30 PM ----------
kansaskid said:
I am also having an issue getting my pc to show the phone as a mass storage device so I could put the recovery file on the phone, I have tried both bubbys kernel which does not have clockwork mod and zedomaxV3 and when I mount usb storage though clockwork mod I get nothing on my pc so I am unable to put the recovery file on my phone. please help
Click to expand...
Click to collapse
Going to repost I resolve my own issue, there are two things I did to finally get my pc to see my phone so I'm not sure which resolved, First which is what I think solved it was be sure you don't have a drive like and dvd-rom drive or flash drive with a assigned letter of E: or F: if you do Google how to change it. And the second thing I did was reflash with zedomaxV3 and let it restart to the boot animation automatically then I unplugged and pulled battery and put battery back in and plugged usb back in and boot to animation again, then restart and mount in clockwork mod.
I hope this helps anyone else.
I made a nandroid backup in cmw v5, installed AE mod rom, didnt like it, booted, and I got cwm v4? ...and my restore/backup file no longer exists.
I cannot unzip the files to the phones folder: /clockworkmod/backup/folder/ (files) because I dont have a folder understand name at all.
This is my first time rooting, Iam still stuck with a looping SPrint loop boot screen.
Any suggestions?
---------- Post added at 03:48 AM ---------- Previous post was at 03:14 AM ----------
Never mind, got it. : )
This saved my phone! I love you all!
OMG! Thank you so much! I had bricked my phone and this worked when other methods did not! It only took me 16 hours to research and try different methods. You are awesome! Back to factory so now I can hopefully find a good root and rom.

[Q] HELP! Internal Storage Write Protected, Unable to modify and change

Hey guys. I'm very familiar with android and it's processes but I have stumbled onto something that I cannot solve... My Internal SD Card has somehow made it self write-protected.... even to my PC! I can't save anything to my internal SD card at all. All camera apps, with the exception of the stock samsung camera set to ext-sd store mode works. If the other camera apps don't have that option, I can't use it. I can't download anything from the web (it will automatically say download unsuccessful and even ODIN can't touch it (I tried to ODIN back to stock NK3... and it partially worked... except that I still have all my downloaded apps installed)
Here's what happened.
The problem started when I was on DomPop v0.1.3 (5.0.2) It started with me not being able to take a screenshot, which I fixed.
Then I flashed PAC-Man RLS 3 (12312014) and that's when I noticed that I can't save any downloads to my internal SD card.
So I recovered to my saved rooted stock NB1... Still no avail and this is where I found out that my 3rd party cameras don't save anymore.
I've done everything from flashng a new ROM, flashing a new recovery, ODINing back to stock... nothing seems to work! And I'm slowly starting to lose space on my ext-sd soo any help would be appreciated by this chic. Thanks in Advance
PS
As of the time I wrote this, I have ODINed 3x now... still, every time I reboot, I still have my downloaded apps... it's as if my /data partition is write protected from ODIN too!
This happened to my SM-N900T when I installed a custom Recovery which contained the wrong '/sepolicy_version' for my device. The Recovery developer fixed the file but I had to format '/data' after installing it to get files with the correct policy.
Frank
---------- Post added at 01:16 PM ---------- Previous post was at 12:59 PM ----------
In your root directory, '/se_policy' should look like this, but notice that this is Android 4.3:
VE=SEPF_SM-N900T_4.3_0002
HS=7708d6f9dfc68813c4dddb915812c67b
HA=7136aebc8fc8205ec9adde19ca84e501
HP=0ef457e4c9cbf00b9100f4872e3f7d50
HF=852e176fdcb7a45fc1617bd4e93c2bf9
HM=7bd39dbe5813e94be374bee74d87bf0c
If it shows the wrong device then you can probably fix it by flashing the correct TWRP. And you will probably have to format '/data'.
Frank
Frank Westlake said:
This happened to my SM-N900T when I installed a custom Recovery which contained the wrong '/sepolicy_version' for my device. The Recovery developer fixed the file but I had to format '/data' after installing it to get files with the correct policy.
Frank
---------- Post added at 01:16 PM ---------- Previous post was at 12:59 PM ----------
In your root directory, '/se_policy' should look like this, but notice that this is Android 4.3:
VE=SEPF_SM-N900T_4.3_0002
HS=7708d6f9dfc68813c4dddb915812c67b
HA=7136aebc8fc8205ec9adde19ca84e501
HP=0ef457e4c9cbf00b9100f4872e3f7d50
HF=852e176fdcb7a45fc1617bd4e93c2bf9
HM=7bd39dbe5813e94be374bee74d87bf0c
If it shows the wrong device then you can probably fix it by flashing the correct TWRP. And you will probably have to format '/data'.
Frank
Click to expand...
Click to collapse
Huh... I now I remember... I was on TWRP when the problems started... I'm on Philz now and I still have it. Would this fix the write protected internal SD card issue too?
Try this ---> http://forum.xda-developers.com/showthread.php?t=2684384
meoshe said:
Try this ---> http://forum.xda-developers.com/showthread.php?t=2684384
Click to expand...
Click to collapse
That looks like the same problem and a much simpler solution, but make sure you have a good policy file first.
Frank
---------- Post added at 01:37 AM ---------- Previous post was at 01:26 AM ----------
Up above I use two filenames, '/sepolicy_version' is the correct name of the file. In my case TWRP had the wrong '/sepolicy_version' until the developer fixed it. I still recommend installing the most recent TWRP to get all the right files -- make sure it's the right version (4.3 or 4.4) -- then run restorecon. Then after the fix, return to Philz if you want.
Frank
Did your phone die @deBricker or did this solve the problem? Other people might be waiting with the same problem.
Frank
No. Had to go in recovery and wipe my internal memory (lost everything since I was stupid enough not to make an updated backup... my last one was a month ago) after that, it's been smooth sailing.
I didn't even see that post until today.

Note 2 Stock: Phone won't boot properly /data issues

Hello,
Happy Christmas Eve all,
I'm having a nightmare of a time with my Note 2. It was installing an app update from the play store earlier and I noticed the phone had powered off (assumed battery had died).
On powering up the phone after the Samsung boot screen I'm presented with the set up screen and continuous pop ups informing me system processes have crashed although phone was fully set up before the issue.
I then tried to enter stock recovery and saw a message regarding error when trying to mount /data.
Rather stupidly I have no backup of the internal data which includes a lot of holiday photos I'd like to save.
My question is are there any means I could use to try and recover the data?
I can enter stock recovery and download mode which I'm hoping will improve my chances.
Also when hooked up to the PC, Kies doesn't recognise the device and tells me to use Smart Switch, also when the PC did eventually reognise the phone it showed internal storage as 107mb with 0 free and shows no folders or files within.
Has anyone come across this before or have any advice on how I can try and recover my data?
Many thanks,
Galaxydude1
Galaxydude1 said:
Hello,
Happy Christmas Eve all,
I'm having a nightmare of a time with my Note 2. It was installing an app update from the play store earlier and I noticed the phone had powered off (assumed battery had died).
On powering up the phone after the Samsung boot screen I'm presented with the set up screen and continuous pop ups informing me system processes have crashed although phone was fully set up before the issue.
I then tried to enter stock recovery and saw a message regarding error when trying to mount /data.
Rather stupidly I have no backup of the internal data which includes a lot of holiday photos I'd like to save.
My question is are there any means I could use to try and recover the data?
I can enter stock recovery and download mode which I'm hoping will improve my chances.
Also when hooked up to the PC, Kies doesn't recognise the device and tells me to use Smart Switch, also when the PC did eventually reognise the phone it showed internal storage as 107mb with 0 free and shows no folders or files within.
Has anyone come across this before or have any advice on how I can try and recover my data?
Many thanks,
Galaxydude1
Click to expand...
Click to collapse
Anyone?
in recovery you can mount internal storage, but I'm affraid, that it's SDS
yaro666 said:
in recovery you can mount internal storage, but I'm affraid, that it's SDS
Click to expand...
Click to collapse
Thanks for the reply yaro,
The phone was completely stock so no custom recovery installed. Do you know if there is anyway for me to recover the photos that were on the /data partition?
I've seen a few posts for other devices mentioning reflashing certain files via Odin to then allow recovery of files in /data but nothing definitive.
Any help would be greatly appreciated.
Thanks,
Galaxydude.
Galaxydude1 said:
Thanks for the reply yaro,
The phone was completely stock so no custom recovery installed. Do you know if there is anyway for me to recover the photos that were on the /data partition?
I've seen a few posts for other devices mentioning reflashing certain files via Odin to then allow recovery of files in /data but nothing definitive.
Any help would be greatly appreciated.
Thanks,
Galaxydude.
Click to expand...
Click to collapse
try flashing twrp via odin and then mount internal storage in recovery or use adb to access files on pc
yaro666 said:
try flashing twrp via odin and then mount internal storage in recovery or use adb to access files on pc
Click to expand...
Click to collapse
Thanks for the reply yaro I'll give that a try,
Cheers,
Galaxydude.

Unending trouble with system partition for hydrogen

hi guys, I am having trouble with my MI Max having 32GB internal memory.
From it's behaviour for last few days I have inferred it's system partition is the culprit.
On stock miui rom, it gives msg that encryption unsuccessful and I need to factory reset it. But even after doing factory reset it shows the same msg.
Its with locked boot loader but referring one thread I could install twrp latest version on it by replacing recovery image in stock rom and flashing with mi flash tool in edl mode.
So with two I tried installing few vision rooms like miui eu ROM, RR and crdroid based on Oreo. All the rooms while flashing fine error E1001, saying system image not updated and flashing failed.
I even tried repairing file system, fixing file system, Channing file system to fat, exfat, ext2, ext3, ext4 and f2fs several times (from advanced wipe menu) but things are not improving. Even tried formatting data partition as it's suggested at few places.
I am out of ideas after spending few days trying to fix it by flashing several times.
So please if some one can assist in resolving the issue, I would really appreciate.
Thank you in advance.
You need to format data not wipe . Go to twrp choose wipe , format data and type yes . Note, by doing this you will lose all of your data if you want to keep it make sure to save it to your PC or USB drive.
Zasnizas said:
You need to format data not wipe . Go to twrp choose wipe , format data and type yes . Note, by doing this you will lose all of your data if you want to keep it make sure to save it to your PC or USB drive.
Click to expand...
Click to collapse
Have already done it several times by now. Didn't make any difference.
harpy.eagle said:
Have already done it several times by now. Didn't make any difference.
Click to expand...
Click to collapse
As discussed yesterday on unofficial LineageOS (nijel8) thread the nand is damaged. You need to delate partition, compact unallocated space & then recreate the exactly the same partition. That way it won't be on the same spot & it will work.
Use a PC with an partition manager.
https://gparted.org/
Zola III said:
As discussed yesterday on unofficial LineageOS (nijel8) thread the nand is damaged. You need to delate partition, compact unallocated space & then recreate the exactly the same partition. That way it won't be on the same spot & it will work.
Use a PC with an partition manager.
https://gparted.org/
Click to expand...
Click to collapse
Tks a lot for the reply. It gave a ray of hope to me. Though I am hearing modifying partition on android device for the first time to fix it. That too for bricked device and to do it on PC. Is there any thread guiding about it? Would read a bit about how to do it in order to not mess things up even more.
harpy.eagle said:
Tks a lot for the reply. It gave a ray of hope to me. Though I am hearing modifying partition on android device for the first time to fix it. That too for bricked device and to do it on PC. Is there any thread guiding about it? Would read a bit about how to do it in order to not mess things up even more.
Click to expand...
Click to collapse
It's still ain't bricked so you can do this relatively easy. When it's bricked EDL programmer for used NAND chip used is needed.
So take a deep breath, see the exact size & type of the partition, delate it, create a new one exactly the same (type, size & name).
https://s10629.pcdn.co/wp-content/pictures/2010/01/captured_Image1.png51.png
https://helpdeskgeek.com/wp-content/pictures/2010/01/captured_Image1.png111.png
The tool I gave you URL is very good documented and with plenty examples & user guides available all which can be found on the site, it uses graphics GUI so it's as easy as it can be. So if you are inexperienced read/watch first how it's done. After you are done flash what you want in TWRP.
Best regards.
What I meant to ask is, how to access partitions of mobile on PC? I have used partitioning app on windows but never for android device. Anyway, as u have clued, I shall try accessing partitions with mobile connected in edl mode.

How to repartition internal storage

Hello.
My internal storage 16gb is separated into two - 4gb for apps/cache and 9gb for files. I need to make this 7gb vs 6gb. Is there a way?
retterlad said:
Hello.
My internal storage 16gb is separated into two - 4gb for apps/cache and 9gb for files. I need to make this 7gb vs 6gb. Is there a way?
Click to expand...
Click to collapse
Is there a reason that speaks against unification of the memory?
For unification of the whole memory i can recommend that: https://forum.xda-developers.com/find-7/how-to-guide-8-1-android-lvm-chinese-t3783168
D0ping said:
Is there a reason that speaks against unification of the memory?
For unification of the whole memory i can recommend that: https://forum.xda-developers.com/find-7/how-to-guide-8-1-android-lvm-chinese-t3783168
Click to expand...
Click to collapse
Hello, D0ping! Thanks for responding.
A few questions before I go ahead with your recommendation:
1. Will there be limitations or problems later like I won't be able to use the storage or something?
2. Custom rom, root, etc will work like normal, right? I'm using Lineage 16.0 (Android 9) on X9006 with TWRP.
3. By "unification of memory", do you mean that the internal storage becomes one whole unit, used for apps, files or both?
4. What exactly are LVM and Chinese Unified Storage Method?
5. This process is to make the two internal storage units become one, and it will not interrupt other areas in the phone, correct?
6. The end result of this process gives me 16gb storage that can be used for files which also stores apps, instead of the old way which keeps the app data in system which cannot be accessed without root?
7. Additionally, in that post by brownboy1289, the screenshot of the software he linked shows some kind of unusual typewriting along with some Chinese at the bottom. I don't know Chinese, so it won't be an issue, right? Regards.
8. Also, I read in Reddit where some people said something like some roms won't be supported ("I don't know if CM12 supports it", "No, CM, doesn't support it."). Will this be an issue for Lineage 16.0?
Hey Dude, a lot of questions.
I give you short answers:
1. No
2. Custom Roms and magisk work fine
3. Yes, internal storage becomes one whole unit.
4. They are different methods. I prefer chinese method. I cant explain the difference.
5. Yes
6. You will get 16gb storage. You can use them for apps, files, pictures or anything else. I don´t know where those apps are located but with root it should be no problem.
7. Sorry link of the screenshot isnt working. If you follow the steps and read the posts of thread you will know everthing.
8. Lineage 16.0 has no problems. I have installed it on my find 7a.
D0ping said:
Hey Dude, a lot of questions.
I give you short answers:
Click to expand...
Click to collapse
@
Thanks for this! I am trying to do it now but I have some issues. There was one point when I tried to go into fastboot by clicking Volume Up without the battery. It worked at first but then I decided to just unplug the phone from my laptop and ended it. I think something happened and it bricked, I tried to do it again but the screen is black for fastboot mode (without battery). When I put the battery in and try to go into fastboot, it works and shows the screen. But without battery, there's black screen. So in the X9007_Android5.0_16G_20150520 program, I took out the battery and tried to proceed using this black screen fastboot mode and for some reason the timer goes until 10 seconds then it freezes. Nothing happens after that. Video: https://streamable.com/jq8cdd
What can be done?
retterlad said:
Hello, D0ping! Thanks for responding.
A few questions before I go ahead with your recommendation:
1. Will there be limitations or problems later like I won't be able to use the storage or something?
2. Custom rom, root, etc will work like normal, right? I'm using Lineage 16.0 (Android 9) on X9006 with TWRP.
3. By "unification of memory", do you mean that the internal storage becomes one whole unit, used for apps, files or both?
4. What exactly are LVM and Chinese Unified Storage Method?
5. This process is to make the two internal storage units become one, and it will not interrupt other areas in the phone, correct?
6. The end result of this process gives me 16gb storage that can be used for files which also stores apps, instead of the old way which keeps the app data in system which cannot be accessed without root?
7. Additionally, in that post by brownboy1289, the screenshot of the software he linked shows some kind of unusual typewriting along with some Chinese at the bottom. I don't know Chinese, so it won't be an issue, right? Regards.
8. Also, I read in Reddit where some people said something like some roms won't be supported ("I don't know if CM12 supports it", "No, CM, doesn't support it."). Will this be an issue for Lineage 16.0?
Click to expand...
Click to collapse
retterlad said:
@
Thanks for this! I am trying to do it now but I have some issues. There was one point when I tried to go into fastboot by clicking Volume Up without the battery. It worked at first but then I decided to just unplug the phone from my laptop and ended it. I think something happened and it bricked, I tried to do it again but the screen is black for fastboot mode (without battery). When I put the battery in and try to go into fastboot, it works and shows the screen. But without battery, there's black screen. So in the X9007_Android5.0_16G_20150520 program, I took out the battery and tried to proceed using this black screen fastboot mode and for some reason the timer goes until 10 seconds then it freezes. Nothing happens after that. Video: https://streamable.com/jq8cdd
What can be done?
Click to expand...
Click to collapse
I don´t know why you have unpluged the cable during work!?
Can you install TWRP via Fastboot? Or is TWRP already installed?
Try this method to unbrick your device: https://forum.xda-developers.com/find-7/how-to-debrick-unbricka-oppo-7-7a-t3717802
D0ping said:
I don´t know why you have unpluged the cable during work!?
Can you install TWRP via Fastboot? Or is TWRP already installed?
Try this method to unbrick your device: https://forum.xda-developers.com/find-7/how-to-debrick-unbricka-oppo-7-7a-t3717802
Click to expand...
Click to collapse
@x
I wanted to try again from the start after seeing how it works so I just unplugged it assuming it wasn't going to cause any issues. From then, the fastboot screen doesn't show at all when I connect the phone without battery to laptop. My phone is not entirely bricked, just the bootloader / fastboot isn't working properly. I still have the phone in its normal state with Lineage 16.0 and all the apps/data, etc (I haven't wiped anything yet). Is there a way to factory reset/repair/reinstall the fastboot thing in my phone?
retterlad said:
@x
I wanted to try again from the start after seeing how it works so I just unplugged it assuming it wasn't going to cause any issues. From then, the fastboot screen doesn't show at all when I connect the phone without battery to laptop. My phone is not entirely bricked, just the bootloader / fastboot isn't working properly. I still have the phone in its normal state with Lineage 16.0 and all the apps/data, etc (I haven't wiped anything yet). Is there a way to factory reset/repair/reinstall the fastboot thing in my phone?
Click to expand...
Click to collapse
Luckily your phone is still working. Maybe a factory reset can resolve your problem but I dont think so. I see no other option than replace linage with the original os. After that you can give your memory unification a next try. Afterwards you can flash TWRP and Lineage (with patch).
Help??
retterlad said:
Hello.
My internal storage 16gb is separated into two - 4gb for apps/cache and 9gb for files. I need to make this 7gb vs 6gb. Is there a way?
Click to expand...
Click to collapse
did anybody know where i can get stock recovery??
NotAProButPrettyGood said:
did anybody know where i can get stock recovery??
Click to expand...
Click to collapse
https://mega.nz/file/lRggFAzD#74n51m_eFx1O66U1KW1qmkjyAXDjLiTPZ1LRu0kqVew
ColorOS_2.1_Stock_Recovery.img
Hi, can anyone provide the package x9007_Android5.0_16G_20150520.rar for download, other than from baidu, I really have trouble getting the files from there
Thank you =)
It's look like I'm posting a late reply but if you still want the file just PM me.. thanks..
Really sad that development for this device seem terminated..:crying:

Categories

Resources