Related
Recently successfully replaced the LCD screen on my Acer A100. Device worked fine for some time after that repair. Wanting to get a secondary charger for use at work I went to radio shack. Sales "tech" tried several different adapters, found one that fit inside he port, but wiggled. She plugged it in but device wasn't showing a charge. Decided to order one from online. At home the device still would not charge with its own charger. Thought maybe the charger was faulty. Ordered two more. Still the A100 turned off when charger plugged in. Figured tech had burned out the a/c port. Ordered and installed a new one. Still A100 turns off immediately when charger is plugged in. I have 3 chargers now - same results with all 3. Have now ordered a docking station to utilize (hopefully) charging ability through 40 pin connector.
If this connection creates same shut down am I looking at a battery replacement? AM sitting at 33% battery level now, device shut down completely.
Acer wants 199.00 prepaid to submit to them for repair - this is more than I paid for the device! Not really an expense I am willing to pay if all it needs is a battery. There is no erratic behavior , just immediate shutdown as soon as a charger is connected. Any ideas?
PocketFuzz said:
Recently successfully replaced the LCD screen on my Acer A100. Device worked fine for some time after that repair. Wanting to get a secondary charger for use at work I went to radio shack. Sales "tech" tried several different adapters, found one that fit inside he port, but wiggled. She plugged it in but device wasn't showing a charge. Decided to order one from online. At home the device still would not charge with its own charger. Thought maybe the charger was faulty. Ordered two more. Still the A100 turned off when charger plugged in. Figured tech had burned out the a/c port. Ordered and installed a new one. Still A100 turns off immediately when charger is plugged in. I have 3 chargers now - same results with all 3. Have now ordered a docking station to utilize (hopefully) charging ability through 40 pin connector.
If this connection creates same shut down am I looking at a battery replacement? AM sitting at 33% battery level now, device shut down completely.
Acer wants 199.00 prepaid to submit to them for repair - this is more than I paid for the device! Not really an expense I am willing to pay if all it needs is a battery. There is no erratic behavior , just immediate shutdown as soon as a charger is connected. Any ideas?
Click to expand...
Click to collapse
If its doing it on 3 chargers its sounding more like a board charging circuit issue. You could remove the battery and then see if it behaves normally, that'll be battery or board right there. Or if you have a multi meter test output at the battery connector.
Tapatalked from my HTC DNA - ReVolt
Tried connection without battery
pio_masaki said:
If its doing it on 3 chargers its sounding more like a board charging circuit issue. You could remove the battery and then see if it behaves normally, that'll be battery or board right there. Or if you have a multi meter test output at the battery connector.
Tapatalked from my HTC DNA - ReVolt
Click to expand...
Click to collapse
Don't have a multi meter. Tried connection via new docking station, got same response: device immediately shut off. Tried your suggestion, disconnected battery connected to docking station, got immediate shut off. Same with charger via a/c port. :crying: Mainboard is out? But Device responds and acts normal when in battery mode - or is this isolated to the charging circuit part of the main board?
Thanks for the suggestion!
PocketFuzz said:
Don't have a multi meter. Tried connection via new docking station, got same response: device immediately shut off. Tried your suggestion, disconnected battery connected to docking station, got immediate shut off. Same with charger via a/c port. :crying: Mainboard is out? But Device responds and acts normal when in battery mode - or is this isolated to the charging circuit part of the main board?
Thanks for the suggestion!
Click to expand...
Click to collapse
Sounds like its tripping on the charger circuit and cutting out, like a breaker tripping. IMO look carefully for any shorts on the boards, even something stupid like dog hair can cause strange things to happen. A good blasting with air wouldn't hurt either. It could even be the dock port as it does charge from there and is subject to debris also.
Tapatalked from my HTC DNA - ReVolt
one more try
pio_masaki said:
Sounds like its tripping on the charger circuit and cutting out, like a breaker tripping. IMO look carefully for any shorts on the boards, even something stupid like dog hair can cause strange things to happen. A good blasting with air wouldn't hurt either. It could even be the dock port as it does charge from there and is subject to debris also.
Tapatalked from my HTC DNA - ReVolt
Click to expand...
Click to collapse
Thanks again for more suggestions. Yup I have been over the board and all connections with a looking glass. Changed out the A/C dock port. My suspicion is that when the Radio Shack tech powered up the "Almost fits" adapter it blew whatever breaker the board has.
When I had it connected to the docking station with the battery disconnected, it powered on, then immediately shut off. So this definitely sounds like a "blown fuse". I completely disassembled and reassembled it again (except for the LCD screen) and checked all connections and plugs. Nothing visible to indicate a burnout or cross connection.
No odd smells either. Probably some teensy weensy transistor or resistor or something. I am not an electrician - just good at R & R.
Another visit to ebay and I am parting with 50 bucks for a "factory refurbished" motherboard. In the mean time, my beloved tablet will await further surgery. Will keep you posted. Board should be here by Saturday. I hope so - battery is down to 27%. Thanks again for weighing in!
PocketFuzz said:
Thanks again for more suggestions. Yup I have been over the board and all connections with a looking glass. Changed out the A/C dock port. My suspicion is that when the Radio Shack tech powered up the "Almost fits" adapter it blew whatever breaker the board has.
When I had it connected to the docking station with the battery disconnected, it powered on, then immediately shut off. So this definitely sounds like a "blown fuse". I completely disassembled and reassembled it again (except for the LCD screen) and checked all connections and plugs. Nothing visible to indicate a burnout or cross connection.
No odd smells either. Probably some teensy weensy transistor or resistor or something. I am not an electrician - just good at R & R.
Another visit to ebay and I am parting with 50 bucks for a "factory refurbished" motherboard. In the mean time, my beloved tablet will await further surgery. Will keep you posted. Board should be here by Saturday. I hope so - battery is down to 27%. Thanks again for weighing in!
Click to expand...
Click to collapse
To bad considering the crappy battery life so its not like you can charge some other way and swap the battery around.
Example, I have a bricked unit that charges but doesn't otherwise work, so I mean using my bricked board to charge it and the non charge board for use. The a100 isn't really a good setup for swapping around lol. I may actually be interested in that board now that I think about it...
Tapatalked from my HTC DNA - ReVolt
hmmm an idea for the brave
pio_masaki said:
To bad considering the crappy battery life so its not like you can charge some other way and swap the battery around.
Example, I have a bricked unit that charges but doesn't otherwise work, so I mean using my bricked board to charge it and the non charge board for use. The a100 isn't really a good setup for swapping around lol. I may actually be interested in that board now that I think about it...
Tapatalked from my HTC DNA - ReVolt
Click to expand...
Click to collapse
If I could figure out a way to charge the battery OTHER than through the board - I would! Which got me to thinking. One COULD get a second rear panel, cut a door in it, install teensy weensy hinges or create a hinge with cloth tape. then make some sort of extension cord for the battery charging cord, plug it in to the "external" charging board and refill the battery that way.
With a working board and the right know how, one could just extract the board, put it in a box and make a charger out of it too.
But that is just my brain rattling around ideas. :silly: Hopefully this new "refurbished" mother board will do the trick and I will learn my lesson and NEVER let a sales "tech" attempt trial adapters! at 10 minutes to 9pm tonight it was in Texas....
Until I CANNOT use it, I didn't realize how MUCH I used this little tablet!
now it blinks orange?
Oh fer cryin out loud! The motherboard has arrived, I have installed it. Can plug n the charger and drop it onto the docking station and now I get the same response for both charging options: Charge LED lights up orange solid for just about 60 seconds, then begins blinking. Device doesn't respond when power button is pushed UNLESS it is plugged in, and then it just sits at the "ACER" screen.led changes to blue.
OK, wait a minute, this is the third time I have turned it on while plugged in. Acer screen has moved to Android, Device has started. Battery icon showing a question mark. 23%
Turned off, turned back on, now battery shows only 3%????
Think I saw something on the forums about that. will go on a quest.
Finally charging again!
Shhh, don't want to disturb my device....
Found folks on other forums with similar issues of the Acer A100 tablet showing only 3% charge. I removed and inserted the charging pin several times, the device would show solid orange led for about one minute then start blinking. Turned the device on when charger plugged in, unlocked the screen, then with device still plugged in I shut it down completely. Removed charger. Plugged it back in and so far the led is staying at solid orange.
Please keep your fingers crossed for me! This has been quite the roller coaster ride of discovery. Will leave it be for overnight (what is left of the overnight). Then peek at it in the morning. With any luck at all it will have accepted a full charge and I will be greeted with a functioning device! I almost want to learn a new trade..
well now that is weird, got up this morning to a nice blue charge indicator. Yay! Unplugged charger, press on button, hold, hold, hold, hold, hold and device does not start up. Dang it! Plugged it back in, led went solid orange, then started blinking again! Pressed and held on button. Device came on. battery meter shows 3% and a question mark! HUH?
have device plugged in, settings of course show android version 3.2.1 for this motherboard. Guess I need to upgrade it to ICS maybe that will resolve this weird battery issue? Hope soemone here has ideas, feels like I am soooo close to resolving this.
I read the upper posts.
Now I want to share my experience regarding battery load sharing:
I have allso problems to charge the battery.
I have on my tab, for example, 40% of battery power.
I turn my tab off.
When i plugged the charging cable in it shows me the orange led for load.
After two hours or more i turned the tab on.
It shows me not more than 40% but only 37% or so.
So not loaded. This was a bad sign....
I dont no was happend.
I get a little bit nervous but when the tab not get power it doesnt work....
After two/three hours the battery was empty.
Now i can only start my tab while plugged the charging cabel in because the battery will not load.
I have tried several options to find a solution (disconnect the battery, install a new battery, etc. ....).
My solution was fairly straightforward:
I open the tab. Look where the power comes in.
Of the charging socket go four (two red and two black) cable to the motherboard and from the motherboard it goes seven (two red, two black and for me not so important three other coloured cabels) to the battery.
I organized four thin wire and soldered it from the charging socket directly to the battery (of course red to red black to black ).
The result:
When i plugged the charging cabel in while android is running i get no information to load and it shows me not to.
But when i turned the tab off and on again it shows me that it has the battery charged :fingers-crossed: .
After on night while the charger plugged in the battery is fully loaded!!
And of course i get the information in android the discharging of the battery but this is an normaly thing!
So, the problem to load the battery for me is solved .
I hope it helps a little bit for everyone!
frischeis said:
I read the upper posts.
Now I want to share my experience regarding battery load sharing:
I have allso problems to charge the battery.
I have on my tab, for example, 40% of battery power.
I turn my tab off.
When i plugged the charging cable in it shows me the orange led for load.
After two hours or more i turned the tab on.
It shows me not more than 40% but only 37% or so.
So not loaded. This was a bad sign....
I dont no was happend.
I get a little bit nervous but when the tab not get power it doesnt work....
After two/three hours the battery was empty.
Now i can only start my tab while plugged the charging cabel in because the battery will not load.
I have tried several options to find a solution (disconnect the battery, install a new battery, etc. ....).
My solution was fairly straightforward:
I open the tab. Look where the power comes in.
Of the charging socket go four (two red and two black) cable to the motherboard and from the motherboard it goes seven (two red, two black and for me not so important three other coloured cabels) to the battery.
I organized four thin wire and soldered it from the charging socket directly to the battery (of course red to red black to black ).
The result:
When i plugged the charging cabel in while android is running i get no information to load and it shows me not to.
But when i turned the tab off and on again it shows me that it has the battery charged :fingers-crossed: .
After on night while the charger plugged in the battery is fully loaded!!
And of course i get the information in android the discharging of the battery but this is an normaly thing!
So, the problem to load the battery for me is solved .
I hope it helps a little bit for everyone!
Click to expand...
Click to collapse
I really hope other isn't any voltage or amperage changes needed of that can blow that battery up real quick, plus it can't stop charging, you'll need to monitor that yourself.
Thanks for the info though, it does appear to be yet another somewhat common bug these have that can be addressed by a user if they feel the need to.
Tapatalked from my HTC DNA - ReVolt
Not switch the charger off when the battery is full?
I think the charger there is a shutdown would otherwise overload the battery, right?
Or do this the motherboard?
Anyway, for me the tab is fully working now and if the battery is broken, it is not a big expense to replace them .
frischeis said:
Not switch the charger off when the battery is full?
I think the charger there is a shutdown would otherwise overload the battery, right?
Or do this the motherboard?
Anyway, for me the tab is fully working now and if the battery is broken, it is not a big expense to replace them .
Click to expand...
Click to collapse
I was saying the board is in charge of cutting the battery charge off, not the charger itself so maybe keep an eye on it, its a good way for an explosion or fire.
Tapatalked from my HTC DNA - ReVolt
A100 tablet not charging still
Frischies is much braver than I am.
Wiring the battery direct to the charging port- I would definitely worry about burning up the battery or causing a fire - especially while charging when I sleep. I have had more than my fair share of run ins with fire.
The Motherboard I ordered arrived and I installed it. It was listed as "factory refurbished", but unfortunately will not accept a charge. I thought it had charged overnight at one point, but all it does is blink orange and the battery reads 3% or 0%. Turning the device off when plugged in and doing a reset has not helped. The vendor has been gracious to do a replacement, so I will follow that route until I get a working motherboard.
I have discovered that the docking station will be a welcome addition to my Acer tablet paraphernalia! Although this model docking station isn't the one that allows HDMI throughput, it still will be nice for music, and other media. A Bluetooth keyboard and the tablet will offer yet another computer tool!
First things first though, get the tablet to accept a charge - until then it is a really wide flat paper weight! I am getting VERY adept at opening the tablet and removing the internals!
It is working again! The motherboard sent was defective but vendor issued an RMA. Received the replacement yesterday, installed it last night. Charged over night and fully functional this morning! Ahhh it feels good to have my little buddy back again. Didn't realize how much I used it, until I couldn't use it! Thanks to all for the help.
Sent from my A100 using xda app-developers app
I replaced the battery on my 2014 but now I'm getting a red x when I plug it into the supplied Samsung charger. It is getting a charge but I would say it's a trickle. I had it plugged in overnight and it went from 50% to 90% in 7 hours.
Thinking it's the replacement battery I put in the original one but have the same results.
Any ideas if something might have been damaged during the replacement?
No matter what I do I cannot get my tablet to do more than a trickle charge. I've replaced the charging port flex cable and that doesn't change having the red x in the battery icon and taking forever to charge.
NO EXPERT here when it comes to this. I just replaced mine.. got it off Ebay cheap.. so thought I would stick it in. Works great.
If it was ME.. I would go back and unplug and replug it back in..
Yeah I unplugged it, put the original battery in, replaced the cable. I'm thinking something must have gotten damaged on the main board. It works but takes forever to charge and I can't connect to my computer so it could be worse.
Hi, I'm wondering if anyone with experience repairing a Nexus 7 2013 could help with my issue. The charging port had loosened to the point of being useless, so I bought a replacement board (straight from Asus). I replaced the board, turned it on and it worked 100%. I left it charging, and a few hours later turned it back on, and now the touchscreen wasn't working. I believe that one of the flex cables which plug into this board connects the touchscreen, so in theory I could get that working. But when I went to tackle it a few days later, the tablet won't turn on. It appears to he completely dead - there's no response from my laptop when I try to connect it via USB (ie no device is detected). I haven't touched anything beyond the bottom board (although I did reseat the display cable at one point thinking it could be a display issue). I have tried bending the charging port back into shape on the original board and using that - no change to my issue. I am at a loss, and I don't want to disassemble the rest of the tablet for no reason - any ideas?
yosifcuervo said:
Hi, I'm wondering if anyone with experience repairing a Nexus 7 2013 could help with my issue. The charging port had loosened to the point of being useless, so I bought a replacement board (straight from Asus). I replaced the board, turned it on and it worked 100%. I left it charging, and a few hours later turned it back on, and now the touchscreen wasn't working. I believe that one of the flex cables which plug into this board connects the touchscreen, so in theory I could get that working. But when I went to tackle it a few days later, the tablet won't turn on. It appears to he completely dead - there's no response from my laptop when I try to connect it via USB (ie no device is detected). I haven't touched anything beyond the bottom board (although I did reseat the display cable at one point thinking it could be a display issue). I have tried bending the charging port back into shape on the original board and using that - no change to my issue. I am at a loss, and I don't want to disassemble the rest of the tablet for no reason - any ideas?
Click to expand...
Click to collapse
It could be something as simple as a discharged battery. Let's take one step at a time. When you use the Qi to charge it, does anything show on the screen? Some people have reported the tab to be stuck at the Google logo after letting it discharge completely. Being totally dead is different. The tab uses current from the battery only, so if it's at 0%, you might need to wait for 1/2 hour or so before you can boot it up.
So I woke up this morning to find my Tab drained. I plugged it in for half an hour, then when I picked it up I noticed there was no charging indicator (the green liquid battery thing). So I thought maybe I didn't plug it in right. I reattached everything, tested the charger on another device, then plugged it back into the tab for about 2 hours...still no juice. I tried powering on and doing the reset thing. still nothing. I brought it to a Samsung service center and they said I have a faulty motherboard. Now I'm wondering how the hell that happened when I've been using this device for about 6 months (only 6 months) without any issues, no overheating or strange reboots or anything, and now just like that I have a motherboard issue? The kicker here is that they're charging 75% of the tablet price to fix it! What gives?! I purchased it from a non-samsung mall store so they said I can't claim warranty. I popped the back off and did the battery pull thing and tried to charge - still nothing. Did I buy a device that decided it was a lemon after 6 months light-moderate use?
Anyone else have this happen? It's never been dropped or anything and I was on stock firmware with nothing but root.
In the UK, If your tablet goes faulty in 12months your guarantee is with the place you bought it from, not Samsung.
John.
It's ALIVE! I thought I'd get a 2nd opinion on my Tab since the guys at the Samsung service center popped it open anyway. Went to a generic phone repair store, all they did was hook it up to this box thing, and it came back to life! The guy said something got corrupted and just re flashed everything to stock rooted. He charged me less than $20 and I have a working Tab again. Obviously the very first thing I did with my resurrected device was to call Samsung's hotline and report how this one service center was trying to scam me into buying a motherboard that cost nearly as much as what I paid for the thing brand new.
Some li-poly battery have an protection circuit built in, if the voltage falls below a certain level say 2.5volts per cell, it disables the battery, if you connect an meter to the battery you will get 0volts , you need an li-ion charger that passes an higher voltage that resets the battery and allows it to work again, I wonder if this is what happened.
http://batteryuniversity.com/learn/article/low_voltage_cut_off
John.
Did they connect via USB or to the motherboard?
@tinderbox could be...must have over-drained itself for some reason.
@ashyx I couldn't really see what he was doing since his work table was obstructed by a bunch of stuff and he had his back towards me, I just saw him grab this small black box, then minutes later he showed me that the tab was already powering on though couldn't get past samsung logo, then he went ahead and flashed to stock.
Reason I ask is I wonder if he used a jtag box to ressurect it by reflashing the bootloader.
If he did there must be jtag points on the board as it can't usually be done via USB.
Pity you didn't ask what he actually did as I'm intrigued now.
Did the box look like this: riff box
ashyx said:
Reason I ask is I wonder if he used a jtag box to ressurect it by reflashing the bootloader.
If he did there must be jtag points on the board as it can't usually be done via USB.
Pity you didn't ask what he actually did as I'm intrigued now.
Did the box look like this: riff box
Click to expand...
Click to collapse
Yes! but without the markings.:good:
pawces said:
Yes! but without the markings.:good:
Click to expand...
Click to collapse
Exactly the same or just similar?
yeah i think so... it had similar ports, though not sure about the outer shell of it... i think it was smooth all around with no ridges or anything, just a little black rectangular box.
Sorry to revive an old topic, but i thought i'd do an update instead of start a new one. Tab S died again and I'm now convinced it's over-discharge, as I left it at about 20% and forgot to plug it in before going to bed. Woke up with the tab drained, not responding to any button combinations, not charging with any of my chargers that tested ok with other devices.
Instead of bringing it back to the technician, I thought I'd try mcguyvering the damn thing. I opened up the back, pried the battery terminals up off the board, lifted the battery out, and with a spliced USB cord hooked up to a powerbank, I gave the battery terminals a direct zap, inserting the exposed USB wires into the battery terminals. This took some trial and error as, I didn't know which wire was supposed to go where, but finally I saw the powerbank leds blink, indicating it was discharging into something. I held the wires in place for about 5-10 minutes, noticing some heat on the battery by then. I reinstalled the battery back into the tablet, closed everything up and tried charging again and...hey presto! the tab started charging. :victory: Let it charge for 2 hours and powered on like nothing happened.
disclaimer:
I don't recommend you defibrillate your device's battery unless you know exactly what you're doing and are fully aware of the risks. (I didn't know what I was doing at the time but I was so frustrated at that point I didn't mind if the battery blew up in my face.)
Mine just dead last night while CHARGING (turned off at 13%).....
And refused to turn on till now (still charging and both warm (charger + tab)...
I even plugged an ampere meter to really know if its drawing any or not (it is, at 5.2V 1.7A for 15mins)...
And still no luck
Samsung's device become more ****ty each generations..... Esp the battery...
This one is the replacement batt they gave me after 2mos of usage for infamous Tab S battery issue...
I saw a video on youtube, a guy had a dead 10.5" T1 he took the back off and connected an 1amp microusb charger pcb to connections directly to the battery under a piece a tape, I bought a couple of the microusb charger pcb`s from ebay for 0.42p each in case mine goes dead.
EDIT: I found the video.
https://www.youtube.com/watch?v=BRTgLGrzNz0
John.
pawces said:
Sorry to revive an old topic, but i thought i'd do an update instead of start a new one. Tab S died again and I'm now convinced it's over-discharge, as I left it at about 20% and forgot to plug it in before going to bed. Woke up with the tab drained, not responding to any button combinations, not charging with any of my chargers that tested ok with other devices.
Instead of bringing it back to the technician, I thought I'd try mcguyvering the damn thing. I opened up the back, pried the battery terminals up off the board, lifted the battery out, and with a spliced USB cord hooked up to a powerbank, I gave the battery terminals a direct zap, inserting the exposed USB wires into the battery terminals. This took some trial and error as, I didn't know which wire was supposed to go where, but finally I saw the powerbank leds blink, indicating it was discharging into something. I held the wires in place for about 5-10 minutes, noticing some heat on the battery by then. I reinstalled the battery back into the tablet, closed everything up and tried charging again and...hey presto! the tab started charging. :victory: Let it charge for 2 hours and powered on like nothing happened.
disclaimer:
I don't recommend you defibrillate your device's battery unless you know exactly what you're doing and are fully aware of the risks. (I didn't know what I was doing at the time but I was so frustrated at that point I didn't mind if the battery blew up in my face.)
Click to expand...
Click to collapse
Crescendo Xenomorph said:
And still no luck
Samsung's device become more ****ty each generations..... Esp the battery...
This one is the replacement batt they gave me after 2mos of usage for infamous Tab S battery issue...
Click to expand...
Click to collapse
Samsung tablets only have issue with battery connectors. The white connector with 6 wires has loose connection, the black connector soldered to mainboard has cracked solder joints. New battery won't solve problem if you don't fix these two flaws. Resolder the battery connector will fix most of problems: not charging, reboot, flickering, auto shutdown.
I posted more details in the threat: flickering screen.
so the problem is Samdung's QC....
anyway no more somedung, I switched to Xiaomi Mi Mix, still preordering from China.....
You have to watch these chinies owened tablet and phone manufactues, they have been found to come with built in spyware, sending copys of all your texts ect back to china, it`s been in the news that last few day`s
Lenovo notebooks had a spyware app and Lenovo had to issue insturctions on hot to remove it once it was found.
John.
Crescendo Xenomorph said:
so the problem is Samdung's QC....
anyway no more somedung, I switched to Xiaomi Mi Mix, still preordering from China.....
Click to expand...
Click to collapse
That's OK, I can scan and remove all those spyware.
Still its better to have it properly supported with actual updates (older phone still got all UI + android update, hello MIUI 8).
Rather than using phone without proper software support....
Tab S - buggy and prolly the last MM update
Note 3 - useless LL update, very unstable, consider alpha
Note 8.0 - buggy last KK update, switched to CM13 and happy with it
My Tab S 10.5 is all of a sudden not charging. I have it set to make a sound when plugged in and every ten seconds or so it makes the sound and the charge indicator goes on and off. I'm not touching it at all. It's like it is constantly connecting and disconnecting by itself.
I turn it off and try to charge it when off. Every few seconds the screen turns on with the battery charge picture. It's using more power doing that than it is getting from the charge. I finally have to unplug it to save what battery i have left.
I'm using the Samsung usb cable and charger but I've tried different cable and charger with same result. Do I have a bad usb port? It seems so. I have to wiggle the plug a little at times make charge indicator comes on. But as I said, it's going on and off without me touching it.
It's the weekend so I can't call Samsung. I hope it's covered by warranty.
I have never heard of an S1 owner with an bad microusb port (you could be the first) though i would blame the battery first until proven wrong as it`s way more common, just wait till Monday and get it repaired or replaced.
John.
Oh shoot I just checked my receipt. Bought 11/30/14. Any one has experience with Samsung on product just out of warranty?
It depends on the country you bought it in, also how you bought it, credit cards often get you a second year of protection.
In Europe you can have a 2 year warranty, in the uk you can claim for up to 6 years supposedly.
If it`s the battery you can buy them on ebay for £10 and youtube has a guide on replacing them, I am not cetrain of the microusb ports is a separate module or if you need to replace the motherboard.
EDIT: it looks like the microusb is removable see 2m20s on the video below.
https://www.replacebase.co.uk/samsu...nt-micro-usb-charging-port-and-micro-sd-card/
John.
https://www.youtube.com/watch?v=hm2_AUS_ZpM
Thank you very much. I'll buy the part and maybe I can get a local shop to replace it for me. I'm disabled so I'm hopeless with this kind of repair.