Develop Bugs

[Q] please help needed ASAP htc one x in bootloop

hi there!
my phone is not rooted. i tried to upgrade firmware OTA. and its on bootloop.
here is the detail below
Hboot 1.33
radio 2.1204.135.20
version 3.14.0.0
cid: htc__023
which bootimage i need to flash or which RUU i need to flash to bring phone back to life. thank you in advance

If it is not booting at all you could try to run a RUU. Run this command:
fastboot getvar version-main
Post the output here. You need the correct version or it will fail.
Sent from my HTC One X using xda app-developers app

The ver is 3.14.0.0
And also pls check my phone dtails. In my question above.
Thank you

Upgrade your firmware to 3.17 Hboot 1.39 and then download a nandroid backup of HTC__023... and restore it...
I don't think RUU is available for you. I have the same CID HTC__023 and nand backup is of main-version 3.17
Firmware with Hboot 1.39: http://www.androidrevolution.nl/downloader/download.php?file=3.17.728.1.zip
nandroid backup : http://d-h.st/7oA

Thank you. Ill try this and reply you back.
Sent from my HTC One X+ using xda app-developers app

vin4yak said:
Upgrade your firmware to 3.17 Hboot 1.39 and then download a nandroid backup of HTC__023... and restore it...
I don't think RUU is available for you. I have the same CID HTC__023 and nand backup is of main-version 3.17
Firmware with Hboot 1.39: http://www.androidrevolution.nl/downloader/download.php?file=3.17.728.1.zip
nandroid backup : http://d-h.st/7oA
Click to expand...
Click to collapse
My hboot is 1.33 and also i dont want to unlock bootloader. and i dont want to root my phone either. i just want my phone back to life. thank you

Trying to put stock rom on HOX

Hey guys
I have a HOX with the following :
CID : HTC_032
ROM VER 3.20.401.3
1.39.0000
Running now latest Venom.
I would like to put stock rom on it ! Can you suggest the proper RUU because i can't find anywere the corect one with my specifications.
Is is possible to install a 3.20.401.1 on 3.20.401.3 ?
Many thanks

Minasmorgul said:
Hey guys
I have a HOX with the following :
CID : HTC_032
ROM VER 3.20.401.3
1.39.0000
Running now latest Venom.
I would like to put stock rom on it ! Can you suggest the proper RUU because i can't find anywere the corect one with my specifications.
Is is possible to install a 3.20.401.1 on 3.20.401.3 ?
Many thanks
Click to expand...
Click to collapse
There is no JB 3.20.x.x RUU for now, only some of 3.14.x.x JB but because of S-ON you can not flash lower that phone have, (and i assume that you did not make your own backup before flashing custom rom because if you did you only need to make restore from custom recovery and flash corresponding boot.img from backup) so your only solution is to use nandroid backup for your CID pick nandroid 3.20.401.3 but if there is no matching try nearest lower number!
Pay attention to use nandroid backup for CWM or TWRP - i do not know which custom recovery you have, and how to use nandroid backup - look at mine signature link
Some nandroid backup collections:
1. http://forum.xda-developers.com/showthread.php?t=2189048
2. http://forum.xda-developers.com/showthread.php?t=1975140

I've managed to download a NAND but i get a error at resotring /system ? what should I do ?
I've also installed CMW , first i had TWRP !

Minasmorgul said:
I've managed to download a NAND but i get a error at resotring /system ? what should I do ?
I've also installed CMW , first i had TWRP !
Click to expand...
Click to collapse
Post results of this comand:
fastboot getvar version-main

hpnxfox said:
Post results of this comand:
fastboot getvar version-main
Click to expand...
Click to collapse
3.14.401.31

Minasmorgul said:
3.14.401.31
Click to expand...
Click to collapse
Ah you are lucky then, 3.14.401.31 is your main version, not 3.20.401.X and you can revert to stock with RUU or nandroid.
1. RUU http://bugsylawson.com/files/file/1...-r-radio-5120416229-release-302015-signedexe/
2. And for nandroid backup same that i told you before just download 3.14.401.31 versions not 3.20.401.X
For RUU - you need to relock bootloader before executing from windows, and this will also delete custom recovery!

I have same problem.. more or less.. but my versio-main is 3.14.401.600 ... can I put 3.14.401.31 ???

valinuxx said:
I have same problem.. more or less.. but my versio-main is 3.14.401.600 ... can I put 3.14.401.31 ???
Click to expand...
Click to collapse
No, you can't use this RUU, and unfortunately i did not find compatible RUU or nandroid backup for your phone, what is your CID?

hpnxfox said:
No, you can't use this RUU, and unfortunately i did not find compatible RUU or nandroid backup for your phone, what is your CID?
Click to expand...
Click to collapse
HTC_304 ... So I can't go back to stock ??
Can I install stock ROM from recovery ?? Which one ?? Without changing the bootloader of course (1.28) ??

valinuxx said:
HTC_304 ... So I can't go back to stock ??
Can I install stock ROM from recovery ?? Which one ?? Without changing the bootloader of course (1.28) ??
Click to expand...
Click to collapse
As far as i know at this moment you can not reverse to stock..no RUU or nandroid for this cid or main-version.. Only solution for you is that somebody with same Cid and main version rom gives you nandroid backup that is made with custom recovery.. I do not get it, why people dont make backups -this is main thing in all how to root, use custom roms or flash guides! Sorry and good luck!

second hand phone.. with already unlocked bootloader(1.28) and custom ROM (arhd 12.0) on it.... I always do a Nandroid Back up of my phones....

[Q] Phone hangs after a few seconds

Hi, (Sorry for my English)
I installed Rom, but after a few seconds the device stuck!
If it is plugged (Electricity or PC) is working fine.
I did a restore from: ( CWM Nandroid Backup / CID HTC__405 / 3.20.401.3)
http://forum.xda-developers.com/showthread.php?p=41743027
My system is HTC ONE X (HTC_001)
About:
Android version: 4.1.1.
HTC Sense Version: 4+
software namber: 3.20.401.3
HTC SDK: 4.63
But in me to command: fastboot getvar version-main
3.18.401.1
Please Help
I really panic
Does anyone have an idea?

in fastboot it shows the real base number because that is the one from the official ota from htc the other software number is just from flashed rom......you should always restore backup for your cid not another...that could be one problem...

Thanks
Where there HTC_001 3.18.401.1 nandroid backup?
Or something for my phone?

oredos said:
Thanks
Where there HTC_001 3.18.401.1 nandroid backup?
Or something for my phone?
Click to expand...
Click to collapse
in OP of this here: http://forum.xda-developers.com/showthread.php?t=1975140 just scroll down until you find the HTC_001 CID ...but why do you flash nandroid backup and not custom rom?

Because "custom rom" I have the same problem....

oredos said:
Because "custom rom" I have the same problem....
Click to expand...
Click to collapse
which hboot version do you have? it is in bootloader screen

Thanks for the help
HBOOT 1.39
There is a newer version?

oredos said:
Thanks for the help
HBOOT 1.39
There is a newer version?
Click to expand...
Click to collapse
nope but all should work fine...try a custom rom again with custom kernel ...normally all should fine...if not try to ask HTC or so

first do full wipe including delvik cache and system
install a custom rom(sense rom)
flash boot.img
and reboot
rom name is android revolution hd 22.0
here is the link
http://forum.xda-developers.com/showthread.php?t=1562603

oh man you should let him choose a custom rom not only provide ARHD....

apology
One-X-master said:
oh man you should let him choose a custom rom not only provide ARHD....
Click to expand...
Click to collapse
i am sorry man...i didnt know...

Firmware upgrade problem

Okay my original Cid is H3G__106 and I'm super Cid now, I downloaded htc 001 nandroid backup and changed my Cid to htc 001, as well looked for updates but the update fails in philz.
I need the newer firmware for the new viper rom. (4.4.3 base).
How can I get it?

Shebee said:
Okay my original Cid is H3G__106 and I'm super Cid now, I downloaded htc 001 nandroid backup and changed my Cid to htc 001, as well looked for updates but the update fails in philz.
I need the newer firmware for the new viper rom. (4.4.3 base).
How can I get it?
Click to expand...
Click to collapse
OTA ZIP COLLECTION

BerndM14 said:
OTA ZIP COLLECTION
Click to expand...
Click to collapse
I assume I then need to use the h3g 106 one since the htc001 didn't work. Problem is I have 401.5 and there is no update for that.

Shebee said:
I assume I then need to use the h3g 106 one since the htc001 didn't work. Problem is I have 401.5 and there is no update for that.
Click to expand...
Click to collapse
Did you try to convert your device to international? MID and everything changed to International version? I'm not sure what the MID is for your device but if it's different than 0P6B10000 (International WWE) then it had to have been changed as well before you can convert to WWE version.
401.5 ? For what, 1.54.401.5 ... 2.22.401.5 ?
If you don't want to convert to International, rather go back download your backup from the collection thread and update your device to newest firmware from there.

BerndM14 said:
Did you try to convert your device to international? MID and everything changed to International version? I'm not sure what the MID is for your device but if it's different than 0P6B10000 (International WWE) then it had to have been changed as well before you can convert to WWE version.
401.5 ? For what, 1.54.401.5 ... 2.22.401.5 ?
If you don't want to convert to International, rather go back download your backup from the collection thread and update your device to newest firmware from there.
Click to expand...
Click to collapse
I only changed Cid nothing else. Is there a guide on how to fully convert to international edition?
Atm I'm 1.54.401.5
Problem is the stock thread doesn't have philz recovery backup for h3g 106 1.54.401.5

Shebee said:
I only changed Cid nothing else. Is there a guide on how to fully convert to international edition?
Atm I'm 1.54.401.5
Problem is the stock thread doesn't have philz recovery backup for h3g 106 1.54.401.5
Click to expand...
Click to collapse
The guides that I saw are for changing AT&T into Developer Edition or [GUIDE] S-OFF REQUIRED!! full conversion of GSM m8s to dev edition
Even though it's converting to a developer edition the philosophy behind it is the same when you change to WWE International version. Just use the correct backups, firmwares, MID and CID.
In step 1 you'll follow the thread and use the code for the HTC_Europe MID (0P6B10000).
For step 2 you'll just use HTC__001 as as the CID
Step 3 you'll grab the nandroid backup + stock recovery for the WWE International version (x.xx.401.x ) Rather use an older version like 1.54.401.5/10 and do updates from there, it'll be easier if you don't want to manually flash firmware and OTA's.
If you continue the way he has it in his guide then you'll get the firmware from the OTA collection thread(Just extract it from OTA.zip) or you can get firmware for device from mike1986's Androidrevolution.org
It's for a different device but the idea is the exact same.

BerndM14 said:
The guides that I saw are for changing AT&T into Developer Edition or [GUIDE] S-OFF REQUIRED!! full conversion of GSM m8s to dev edition
Even though it's converting to a developer edition the philosophy behind it is the same when you change to WWE International version. Just use the correct backups, firmwares, MID and CID.
In step 1 you'll follow the thread and use the code for the HTC_Europe MID (0P6B10000).
For step 2 you'll just use HTC__001 as as the CID
Step 3 you'll grab the nandroid backup + stock recovery for the WWE International version (x.xx.401.x ) Rather use an older version like 1.54.401.5/10 and do updates from there, it'll be easier if you don't want to manually flash firmware and OTA's.
If you continue the way he has it in his guide then you'll get the firmware from the OTA collection thread(Just extract it from OTA.zip) or you can get firmware for device from mike1986's Androidrevolution.org
It's for a different device but the idea is the exact same.
Click to expand...
Click to collapse
Basically I just change Cid and mid, then I'm basically converted?

Shebee said:
Problem is the stock thread doesn't have philz recovery backup for h3g 106 1.54.401.5
Click to expand...
Click to collapse
The BIGGEST problem is no such thing as h3g 106 1.54.401.5 in this world

ckpv5 said:
The BIGGEST problem is no such thing as h3g 106 1.54.401.5 in this world
Click to expand...
Click to collapse
Umm I got H3G__106 CID and 1.54.401.5 (through venom) soo. What should I do...

Shebee said:
Umm I got H3G__106 CID and 1.54.401.5 (through venom) soo. What should I do...
Click to expand...
Click to collapse
1.54.401.5 is old Venom ROM version no.
H3G__106 firmware is : 1.54.771.9 (for 4.2.2) and you need the updated firmware 2.22.771.5 to run Venom 4.4.3
So download the OTA 1.54.771.9 -> 2.22.771.5 thanks @houstie, open it with 7-zip, extract out the firmware.zip and flash that in RUU mode.
Then reflash Philz recovery and install latest Venom ROM ...done

Shebee said:
Basically I just change Cid and mid, then I'm basically converted?
Click to expand...
Click to collapse
And placing the correct firmware/rom on it. You are S-OFF though, right? I didn't see you mention it so I'm just basically running on an assumption here?

ckpv5 said:
1.54.401.5 is old Venom ROM version no.
H3G__106 firmware is : 1.54.771.9 (for 4.2.2) and you need the updated firmware 2.22.771.5 to run Venom 4.4.3
So download the OTA 1.54.771.9 -> 2.22.771.5 thanks @houstie, open it with 7-zip, extract out the firmware.zip and flash that in RUU mode.
Then reflash Philz recovery and install latest Venom ROM ...done
Click to expand...
Click to collapse
Thanks I'll try that today.

BerndM14 said:
And placing the correct firmware/rom on it. You are S-OFF though, right? I didn't see you mention it so I'm just basically running on an assumption here?
Click to expand...
Click to collapse
Ye I'm soff rooted unlocked bootloader etc.

Kind of wondering why your using philz instead of TWRP

jake.99x3 said:
Kind of wondering why your using philz instead of TWRP
Click to expand...
Click to collapse
Why not. Twrp is not "better" than philz and vice versa.....

If you want ViperOne, you'll want to switch to TWRP. It's on the OP on their thread.
Also, the super id I use is 11111111. Try that and see if it works.
Sorry I didn't quote you Mr Hofs, but I'm not sure how to yet on tapatalk.
EDIT just figured it out. Next time

Flashing WWE RUU on T-Mob101?

Hi Guys,
im on ViperRom 2.5 and want to install LeeDroid Lollipop Rom and for that i need to update to latest HTC WWE 4.16.401.10 firmware.
Can i just flash the Ruu or do i have to change my CID?
I can't read out my main-version, cause of a TWRP bug, i think?
Can anyone tell me what i should do? Thanks!

You need s-off and the correct cid (and mid) then you can flash a wwe ruu.
Or bring the phone back to stock and do the ota to lollipop if it's out/when it gets out and then install the custom rom

Mr Hofs said:
You need s-off and the correct cid (and mid) then you can flash a wwe ruu.
Or bring the phone back to stock and do the ota to lollipop if it's out/when it gets out and then install the custom rom
Click to expand...
Click to collapse
And how can i get back to stock? I don't know my main-version... i only know, that i have T-Mob101 CID but i don't know how to get back to stock
I just went to Software information and i have Version 2.22.401.5 Does that mean im on WWE already? Or is it just the base of the Viperonem8-rom?
I really don't know how to get back to stock i want to go back to stock and get my phone S-off.... Can i just flash one of this nandroid backups from the RUUs, OTAs, Stock TWRP Backups Thread?
CID T-MOB101
3.32.111.3 - TWRP Thanks to Anakha56
4.19.111.2 - TWRP Thanks to DeepBlue23
Click to expand...
Click to collapse

Mikey94 said:
And how can i get back to stock? I don't know my main-version... i only know, that i have T-Mob101 CID but i don't know how to get back to stock
I just went to Software information and i have Version 2.22.401.5 Does that mean im on WWE already? Or is it just the base of the Viperonem8-rom?
I really don't know how to get back to stock i want to go back to stock and get my phone S-off.... Can i just flash one of this nandroid backups from the RUUs, OTAs, Stock TWRP Backups Thread?
Click to expand...
Click to collapse
yes the 2.22.401 is the build of the viper rom. Check the general section, there is a great thread stickied by @exocetdj they are hosting many nandroid backups and a tutorial on how to get back to stock

I know this thread, but how do i know which nandroid backup i need? i can't read my main-version so i don't know which backup i need

Mikey94 said:
I know this thread, but how do i know which nandroid backup i need? i can't read my main-version so i don't know which backup i need
Click to expand...
Click to collapse
You check the list with backups and check the cids. When the cid matches yours you have your main version. Then check your hboot number. The lower the hboot number the lower the main version is.
Example
3.16 = 1.12 and 1.54
3.18 = 2.22 and higher
3.19 = 3.xx and higher