Hi there, after releasing 118 update for Z1, Z1 users of Vodafone in Germany and Spain could get it, and a German member uploaded his Rom here. So I downloaded it and then made a deodex patch for that. You can download both Rom and patch.
And rooting method is exactly like 108 FW. Recovery also works and its installation way is like his old FW.
Thanks @Henry2o1o for uploading his Rom. And note that as I know, that's just for C6903, and I'm not sure about working it on C6902 or other models.
Rom links:
C6903 14.4.A.0.118 Vodafone DE 1276-7275_R8C (Drive)
C6903 14.4.A.0.118 Vodafone DE 1276-7275_R8C (Direct Drive)
C6903 14.4.A.0.118 Vodafone DE 1276-7275_R8C (Mega)
Size: 1GB
And here is the deodex patch links:
1) I made it, C6903_14.4.A.0.118_deodex (Direct Drive)
2) C6903_14.4.A.0.118_deodex (Mega)
Size: 446.1 MB
Please note that the deodex patches are for a different firmware than the FTF provided. There is a very real chance of bootloops if anyone flashes them on the provided FTF.
Also, the deodex patches for .118 firmwares do result in a bootloop, the deodex tool needs updateing in order to be able to make a deodex patch for .118 FTF that will boot up
Just a warning for users so they know the risks.
gregbradley said:
Please note that the deodex patches are for a different firmware than the FTF provided. There is a very real chance of bootloops if anyone flashes them on the provided FTF.
Also, the deodex patches for .118 firmwares do result in a bootloop, the deodex tool needs updateing in order to be able to make a deodex patch for .118 FTF that will boot up
Just a warning for users so they know the risks.
Click to expand...
Click to collapse
I got a bit what you mean, but I don't know what should I tell others.
I just warn users that They would do it by own responsibilities and I would not accept any risks, right?
If no, so please write it down here and I copy that in the first post
Well, there is a couple of issue.
Firstly, FTF's are not development as they are completely stock files. They should be shared in the FTF mega collection thread in the general section.
Secondly, these FTF's have already been shared in that thread, so this is just a duplicate thread that the mods don't allow.
Thirdly, you should be willing to test these things first before sharing. If you had you would have realised that a .108 deodex patch on a .118 FW will result in a bootloop.
I am sure the mods will sort this out soon enough.
gregbradley said:
Well, there is a couple of issue.
Firstly, FTF's are not development as they are completely stock files. They should be shared in the FTF mega collection thread in the general section.
Secondly, these FTF's have already been shared in that thread, so this is just a duplicate thread that the mods don't allow.
Thirdly, you should be willing to test these things first before sharing. If you had you would have realised that a .108 deodex patch on a .118 FW will result in a bootloop.
I am sure the mods will sort this out soon enough.
Click to expand...
Click to collapse
Now I got exactly what you said
I myself have C6903, and tested both FTF file and deodex patch on my phone
Both worked with no problem, and also now I'm running on 118 FW with deodex patch 118 FW, recovery menu and rooted phone
My patch and his patch are for 118, not 108
So, if mods will have issue with this thread, I would copy whole to that FTF thread
Thanks
OK, your deodex patch say 108 not 118
http://prntscr.com/45xs9q
Also, what has probably happened if you flash that 108 patch onto a 118 FW it will replace your system apps with ones from 108, so basically you are downgrading back to 108 so it will boot.
If the patches are made from a 118 system partition please can you let me know which tool you used.
gregbradley said:
OK, your deodex patch say 108 not 118
http://prntscr.com/45xs9q
Also, what has probably happened if you flash that 108 patch onto a 118 FW it will replace your system apps with ones from 108, so basically you are downgrading back to 108 so it will boot.
If the patches are made from a 118 system partition please can you let me know which tool you used.
Click to expand...
Click to collapse
First sorry, because I miswrite 108 instead of 118. And if you go to all links, all are 118. Just I had wrong in typing
Second, I used this link http://forum.xda-developers.com/showthread.php?p=51811914
Third, the link you want me to see, is banned in my ISP and I can't got there
Please attach it here
That tool does not work on 118 FW. I have tested it myself and had it confirmed by a user in this thread
http://forum.xda-developers.com/xperia-z1/help/root-vodafone-rom-t2826546
Now time to stop spamming the dev forum. the mods will look into it soon enough.
Greg
gregbradley said:
Please note that the deodex patches are for a different firmware than the FTF provided. There is a very real chance of bootloops if anyone flashes them on the provided FTF.
Also, the deodex patches for .118 firmwares do result in a bootloop, the deodex tool needs updateing in order to be able to make a deodex patch for .118 FTF that will boot up
Just a warning for users so they know the risks.
Click to expand...
Click to collapse
gregbradley said:
Well, there is a couple of issue.
Firstly, FTF's are not development as they are completely stock files. They should be shared in the FTF mega collection thread in the general section.
Secondly, these FTF's have already been shared in that thread, so this is just a duplicate thread that the mods don't allow.
Thirdly, you should be willing to test these things first before sharing. If you had you would have realised that a .108 deodex patch on a .118 FW will result in a bootloop.
I am sure the mods will sort this out soon enough.
Click to expand...
Click to collapse
gregbradley said:
OK, your deodex patch say 108 not 118
http://prntscr.com/45xs9q
Also, what has probably happened if you flash that 108 patch onto a 118 FW it will replace your system apps with ones from 108, so basically you are downgrading back to 108 so it will boot.
If the patches are made from a 118 system partition please can you let me know which tool you used.
Click to expand...
Click to collapse
Thread Closed for all these reasons above
Related
November, 29 2011
Honeycomb-Beta-v3.5 for P1000L/N
Download
Instructions (use P1000LVJJM9 Froyo downgrade)
You can download JM9 ROM here .
__________________________________________
November, 03 2011
New kernel for stock Gingerbread.
Really, It is my first stable release.
Odin/Heimdall or CwM Recovery -> HumberOS
Sources at http://code.google.com/u/humberos/
__________________________________________
August, 21 2011
New ROM version HumberOS-v2.1
Based: JP2 - P1000L
Features
APK e Framework Fully Deodexed e Zipaligned
Root e Busybox
Reboot/Recovery/Download [options on power button]
New battery icons
New Pop-ups
New bootanimation (thanks to Alberto Maciel)
New wallpaper
New kernel version 20111027
Download Here
__________________________________________
August, 21 2011
New ROM version HumberOS-v2.0
Based: JP2 - P1000L
Features
Download Here
__________________________________________
August, 21 2011
I created a place for discussion about P1000L/N in Portuguese language.
[Construí um espaço para discussão sobre os modelos P1000L/N em português]
http://www.humberos.com.br
Kernel Changelog
KERNEL - ChangelogCM7 P1000N KernelJune, 21 2011
CM7 Beta with P1000N gingerbread stock kernel.
Stock P1000N KernelJune, 14 2011
Added CF-Root by binary procedure.
June, 24 2011
Added Ext4 support.
June, 27 2011
New version with Voodoo Lagfix
July, 18 2011
New version with Overcome CwM Recovery v4.1.0.9 + Voodoo Lagfix
Overcome CwM Recovery Updated to v4.1.0.9 (Based off ClockworkMod Recovery v4.0.0.9)
Option under Tweaks to enable/disable shortened backlight fix
Nandroid restore no longer borks the kernel
No more annoying "back button disabled" (Hooray!)
Shortened Yes/No confirmation menus
Make /dbdata wipe when executing "factory reset/data wipe"
Make /emmc/.android_secure wipe when executing "factory reset/data wipe"
Complete restructuring of menus
Streamlining of commands and elimination of some never used features that were cluttering the interface
August, 21 2011
New version with Overcome CwM Recovery v4.1.1.4 + Voodoo Lagfix
Overcome CwM Recovery Updated to v4.1.1.4 (Based off ClockworkMod Recovery v4.0.0.9)
more space
Reserved!
For Changelogs...
....
Instructions and References
CM7 - Cyanogenmod 7
Official Thread
Author: @Technomancer
Reference: Cyanogenmod WebsiteCF-Root
Official Thread
Author: @ChainfireHeimdall - Open-Source Cross-Platform Flashing Suite
Official Thread
Author: Benjamin DobellOVERCOME
Official Thread
Author: @alterbridge86Install/Recovery MethodsTroubleshootingIf you have a Froyo stock ROM then you should check if your bootloader is signed/secured.
JM9 P1000L version have a protected bootloader.
You can download app and get more informations about bootloaders here.
Some ROMs dont have a dbdata.rfs file.
dbdata.rfs is necessary for flash NEW roms.
dbdata.rfs link for Gingerbread
Before flash, open .tar file (rom) and drag dbdata.rfs into package.
After flash if your 3G dont work, you should install modem of the previous rom.
You can do this replacing modem.bin (JM9) file into .tar package before flash.Recovery - Black ScreenMany P1000L/N users are trying to install the new android version (Gingerbread).
If your device shows a black screen you will need press on power button some time for power off it.
Now, for download mode you will press this buttons: Home + (Vol -) + Power
You can test download mode with Odin. When it shows COM Port (yellow) enabled.
You need learn about Heimdall.
What is Heimdall?
Heimdall is a cross-platform open-source tool suite used to flash firmware (aka ROMs) onto Samsung Galaxy S devices. More information.
Now, you should download P1000L stock ROM (Password is "samfirmware.com"):
P1000L
Uncompress .rar
Uncompress .tar
You will see:
boot.bin
cache.rfs
factoryfs.rfs
gt-p1000_mr.pit
hidden.rfs
modem.bin
param.lfs
Sbl.bin
zImage
Now, using Heimdall command line, you will flash boot files.
Be careful!
Its very IMPORTANT...
Its works ONLY on P1000N or P1000L devices.
Command for recover:
Code:
heimdall flash --primary-boot boot.bin --secondary-boot Sbl.bin
REMEMBER - The boot files is signed.
Read this topic for solve this.
Voce é o caraaaa!!
Can i use this with...?
overcome 2.0.x will work with this kernel?
and the bootloader?
Wait, this is the official binary kernel + cf-root?
Can I install this with BJP3?
No CwM yet, right?
THANKS!
rslee said:
Wait, this is the official binary kernel + cf-root?
Can I install this with BJP3?
No CwM yet, right?
THANKS!
Click to expand...
Click to collapse
AFAIK, CF-root does have CwM inside already.
This should be ok to use with Overcome too, since Overcome only asks for a GB kernel.
Thanks you very much Humberto, spared me of the work of understanding kernels
Greetings Santroph.
humberos said:
June, 14 2011
I've just ported CF-Root to new Gingerbread Kernel.
Thread about CF-Root
Kernel Download
Flashed by Heimdall 1.0.2b
Uncompress file and write follow command:
Code:
heimdall flash --kernel zImage
Click to expand...
Click to collapse
Humberto, coule you please make a tar/odin version of the kernel? For some reason my heimdall don't connect to my device, no matter what I do.
I can only get a -12 error (cannot connect)
I have installed the drivers and everything else.
Greetings, Santroph.
santroph said:
Humberto, coule you please make a tar/odin version of the kernel? For some reason my heimdall don't connect to my device, no matter what I do.
I can only get a -12 error (cannot connect)
I have installed the drivers and everything else.
Greetings, Santroph.
Click to expand...
Click to collapse
The kernel is a .tar file.
Regards,
Humberto
Sent from my GT-P1000N using XDA Premium App
Hi Humberto,
I'm planning to flash Gingerbread using Heimdall.
I have three questions:
1º) I'll decompress the ROM file and substitute dbdata.rfs and modem.bin with the files you said in the other thread and flash everything with Heimdall (repartition enabled). Is it right?
2º) The bootloaders at the Gingerbread P1000N ROM is fully compatible with P1000L device right?
3º) Is it possible to post here the md5sum of each file that I will need to flash using heimdall? I'll be much more calm if I can compare the md5sum of the files you have flashed and we know that work with the ones I'm suppose to flash.
Thanks,
Ronan
humberos said:
The kernel is a .tar file.
Regards,
Humberto
Sent from my GT-P1000N using XDA Premium App
Click to expand...
Click to collapse
I'm sorry, the old kernel tar files I had had a lot os scripts inside too, so I thought this one wouldn't be accepted by Odin, it worked fine and now I have root
Thank you very much.
Our bootloaders are signed and apparently locked with this rom, do you think it is safe to use the apk to unlock them and than use Overcome?
Greetings, Santroph.
Hello HumberOS
Hi Humberos, I have a galaxy P1000N tab to which you installed your rom and I am as P1000L, then install the Kernel ltn_20110612.tar all very well without complaints with the bootloader unlocked with root enabled ..!
My question is: If I install this new kernel ltn_cfroot_r1 Gingerbread can install without problems ..?
Could you tell me the procedure I followed and the files I need to get this q Gingerbread once flashed with your new kernel ..?
As I said originally my Tab is a P1000N your Rom and you have used Odin 20110612 kernel 1.7 for all procedures
Sorry for the length of my questions but understand I need to do to not ruin my tab and I am very new to this and I would greatly appreciate a clear and comprehensive response to achieve what I ask you as well as a detailed been generous with other users ..
Thank you very much Greetings from Ecuador
scalamusical said:
Hi Humberos, I have a galaxy P1000N tab to which you installed your rom and I am as P1000L, then install the Kernel ltn_20110612.tar all very well without complaints with the bootloader unlocked with root enabled ..!
My question is: If I install this new kernel ltn_cfroot_r1 Gingerbread can install without problems ..?
Could you tell me the procedure I followed and the files I need to get this q Gingerbread once flashed with your new kernel ..?
As I said originally my Tab is a P1000N your Rom and you have used Odin 20110612 kernel 1.7 for all procedures
Sorry for the length of my questions but understand I need to do to not ruin my tab and I am very new to this and I would greatly appreciate a clear and comprehensive response to achieve what I ask you as well as a detailed been generous with other users ..
Thank you very much Greetings from Ecuador
Click to expand...
Click to collapse
I don't think you can flash a Gingerbread kernel on a Froyo ROM, can you?
Hello alroger
So I must first pass a Gingerbread Froyo ...?
I can do it directly from the ROM HumberOs or need to return to the Rom of bone stock original Samsung firmware ...?
Thank you very much for your time and help
Greetings from Ecuador
Ronis_BR said:
1º) I'll decompress the ROM file and substitute dbdata.rfs and modem.bin with the files you said in the other thread and flash everything with Heimdall (repartition enabled). Is it right?
Click to expand...
Click to collapse
You will uncompress .tar and PASTE dbdata.rfs, because this rom dont have it.
Ronis_BR said:
2º) The bootloaders at the Gingerbread P1000N ROM is fully compatible with P1000L device right?
Click to expand...
Click to collapse
Yes, I am using them.
Ronis_BR said:
3º) Is it possible to post here the md5sum of each file that I will need to flash using heimdall? I'll be much more calm if I can compare the md5sum of the files you have flashed and we know that work with the ones I'm suppose to flash.
Click to expand...
Click to collapse
SHA1SUM
Code:
34f374d5be752ebfba3d3846a66727429b63c948 boot.bin
3e6a3d1e6ce91189de1a5776fd91e5a267ee0543 cache.rfs
4c836791da2af319a82d85e8d7af4dce36f60e7c factoryfs.rfs
88497436de86d8b29eccbe7bb34a1422d23867b6 gt-p1000_mr.pit
a20ac1413882718f2c607e7f775dd74920d4a66d hidden.rfs
d7ede0664ff1ba6cdd0f7e9e80e1eba478c63521 modem.bin
cc8888883068c827347f769a9ce395b3290bc3aa param.lfs
45f9cd331a07cb6e6b4468267421c874ef76ddf0 Sbl.bin
7ab6bbf12e5d362c121a09dc500d15b886214838 zImage
Regards,
Humberto.
Maikeu Locatelli said:
Can i use this with...?
Click to expand...
Click to collapse
P1000N or P1000L (without Tv tuner)
Maikeu Locatelli said:
overcome 2.0.x will work with this kernel?
Click to expand...
Click to collapse
I think yes, but I dont tested yet.
Maikeu Locatelli said:
and the bootloader?
Click to expand...
Click to collapse
The bootloaders ARE signed, but NOT secured.
I think that custom kernels and firmwares will can still be flashed.
Regards,
Humberto.
rslee said:
Wait, this is the official binary kernel + cf-root?
Click to expand...
Click to collapse
Yes! Official "binary" P1000N kernel with CF-Root.
rslee said:
Can I install this with BJP3?
Click to expand...
Click to collapse
I advise you flash it with Heimdall.
rslee said:
No CwM yet, right?
Click to expand...
Click to collapse
We have CwM 3.0.0.5 !
Regards,
Humberto.
Hello
HumberOs
Friend looks Gingerbread need to install on my Tab P1000N
I have installed your rom and your zImage_ltn_20110612 Kernel Could you please help me
I need to return to stock Froyo to install Gigerbread ...?
My Tools Froyo stock return are: dbdata.rfs, P1000NUBJM2_P1000NUBJM2_P1000NUUBJM2_HOME.tar, and Odin P1_add_hidden.pit 1.7.
Gingerbread and ascend to the tools and files are the same except that the rom is the P1000NUBJP7_P1000NUBJP3_P1000NUUBJP7_HOME.tar and then would use your kernel ltn_cfroot_r1.tar Flashing
Please I need help with this could you tell me if I'm missing something about this or change something in the procedure ..?
HumberOs you do not have much time to explain everything and there are probably many more like me asking you for help but you'd be infinitely grateful if you give me a hand to have gingerbread on my tab
Thank you very much
Greetings from Ecuador
PS: I'm using Google translator for my language is Spanish
santroph said:
Our bootloaders are signed and apparently locked with this rom, do you think it is safe to use the apk to unlock them and than use Overcome?
Click to expand...
Click to collapse
The bootloaders are signed, but not secured.
Custom kernels and firmwares can still be flashed.
Do you flashed a custom Gingerbread kernel? So I think if you replace Overcome kernel...
Regards,
Humberto.
scalamusical said:
Hello alroger
So I must first pass a Gingerbread Froyo ...?
I can do it directly from the ROM HumberOs or need to return to the Rom of bone stock original Samsung firmware ...?
Thank you very much for your time and help
Greetings from Ecuador
Click to expand...
Click to collapse
I suggest you read and understand the other thread from HumberOS and follow post 314 with Humberto's little procedure for flashing Gingerbread and a few tips on postes following that one.
That means, return to stock Froyo ROM (2.2), wiping everything, before flashing stock Gingerbread ROM (2.3).
1)ROOT-
NO root for 4.3 directly for locked bootloaders
For unlocked here you go http://forum.xda-developers.com/showthread.php?t=2583805
Downgrade to 4.2 to get root
http://forum.xda-developers.com/showthread.php?t=2494134 for 6503
http://forum.xda-developers.com/showthread.php?t=2335306 for 6502
Flashtool
latest flashtool download
http://www.flashtool.net/download.php
Flash .ftf using flashtool
http://forum.xda-developers.com/showthread.php?t=2054486
root 4.2.2:
doomlords rooting toolkit
http://forum.xda-developers.com/showthread.php?t=2327472
install cwm
http://forum.xda-developers.com/showthread.php?t=2251093
to get root for 4.3 and dual recovery for 4.3 upgrade by nuts method
http://forum.xda-developers.com/showthread.php?t=2567266
2) Bootloader-
Backup ta partition so that you dont loose bravia engine
http://forum.xda-developers.com/showthread.php?p=41763438
Unlock bootloader
-get your code from here
http://unlockbootloader.sonymobile.com/
Unlock bootloader using flashtool
http://forum.xda-developers.com/showthread.php?t=2447319
3)Rom index:
Stock:
-4.2 stock link given above
-4.3 stock
http://forum.xda-developers.com/showthread.php?t=2640151 for 6503
-4.3 stock
http://forum.xda-developers.com/showthread.php?t=2655100 for 6502
Stock based
Existenz rom(4.3)-
http://forum.xda-developers.com/showthread.php?t=2352237
sky dragon rom (4.2)-
http://forum.xda-developers.com/showthread.php?t=2407411
Lg g2 rom(4.2)
http://forum.xda-developers.com/showthread.php?t=2550147
Custom roms-
Kitkat:
Cm11-
http://forum.xda-developers.com/showthread.php?t=2540671
Codename lungo-
http://forum.xda-developers.com/showthread.php?t=2650316
Omni rom-
http://omni.cmxlog.com/4.4/odin/
Avatar rom-
http://forum.xda-developers.com/showthread.php?t=2243238
Liquidsmooth rom-
http://forum.xda-developers.com/showthread.php?t=2656019
Jellybean:
Illusion rom-
http://forum.xda-developers.com/showthread.php?t=2381901
Cm10.x
http://forum.xda-developers.com/showthread.php?t=2436626
4)Kernels:
stock kernel based for 4.3 .569
http://forum.xda-developers.com/showthread.php?t=2599619
doom kernel stock based 4.3
http://forum.xda-developers.com/showthread.php?t=2594479
advanced stock kernel 4.4 .101:
http://forum.xda-developers.com/showthread.php?t=2641695
78 kernel-
http://forum.xda-developers.com/showthread.php?t=2624339
All spark kernel-
http://forum.xda-developers.com/showthread.php?t=2596496
5)Scripts
Pure performances x for any rom (actually any device)
http://forum.xda-developers.com/showthread.php?t=2630170
6)Gapps:
paranoid 0 day gapps art compatible
http://forum.xda-developers.com/showthread.php?t=2397942
Note:
all instructions are provided in repective links
installing a rom of different region wont make much difference
i m not responsible for any damage to your devices i m just sharing the links
Credits:
to all the ops in the respective thread
1. Good job
2. Deserves to be sticky in general
3. Unlocked bootloader with 4.3 can be rooted (downgrading is pain in arse)
4. We know that 6502/3 stock/rom works on each other still it is not advisable to do
For example consider me (globaly recognized noob) flashed it wrongly i know its ally mistake but they will blame you cause you advised them
5. We have one thread like this so ask mods to merge that and this thread to avoid confusion
6. You missed all spark's AOSP kernel, 78kernel.
7. You missed hell lot of things
8. Nuts recovery is good one
9. The cwm you linked is for unlockedbootoader only
10. There are two cm from fxp and cm both have same source but different release pattern so provide link to threads
11. Add work in progress in title so you can sort everything out
No offense just helping you to sort things out if you need my help throw me a PM.
Add a faq section below my post or you can use my post so everything is in line.
You tried to do something helpful so kudos
Always there to help
Globally recognized N00B
thread updated
Needs layout.
DoubleYouPee said:
Needs layout.
Click to expand...
Click to collapse
what sort of layout ?
bhavstech said:
what sort of layout ?
Click to expand...
Click to collapse
Paragraphs..punctuation..etc..?
This thread is work in progress so friends please dont post till it is complete
Regards
Globally recognized N00B
alkesh95 said:
This thread is work in progress so friends please dont post till it is complete
Regards
Globally recognized N00B
Click to expand...
Click to collapse
+1
it would be a good help if people would provide more material to add instead of complaing :fingers-crossed
ask the mods to make it a sticky thread
Advanced stock kernel 4.3 FW .101
http://forum.xda-developers.com/showthread.php?t=2641695
Read the full topic before doing anything, I am not responsible for any problem that this may cause to your device!
Information
This will deodex 14.4.A.0.157 firmware for Xperia Z1.
This will work on C6943.
Requirements
Xperia Z1 with 14.4.A.0.157 stock KitKat.
Working recovery (Don't have recovery? Try XZDualRecovery by @[NUT])
Instructions
Flash the zip on recovery.
Clear dalvik-cache.
Reboot to system.
Additional info
Before you flash, create a backup on your recovery (in case anything goes wrong).
This won't root your device!
Base files
C6943_14.4.A.0.157_Customized_BR_1276-7099_R5C.ftf
Downloads
For C6943:
File: C6943_14.4.A.0.157_deodex.zip
Size: 470.6 MB
MD5: E13ADF50BA6669CFF0A0A246BFC6D5E0
Enjoy your deodexed KitKat ROM! And please hit "Thanks" if you liked it.
RHBH said:
Read the full topic before doing anything, I am not responsible for any problem that this may cause to your device!
Click to expand...
Click to collapse
Thanks @RHBH
Installing let's see if the 157 ROM is any better, although it is only two updates from the original 108, and only a few MB of difference, I'm hopping for a better battery life. BTW I got .157 OTA this week and didn't lose root and, xposed is working as it should.
Greetings guys!
This is another firmware for Xperia Z1 (C6903), and so far is been released in just few countries. I make it pre rooted as by my side once you have a pre rooted firmware you can be able to manage and delete apps what you don`t need to free space in your mobile.
P.S. So far i see same threads but for Z1 Compact and Z Ultra. (if mods believe is not good this thread to exist i don`t mind if it will be deleted)
What do you need:
- Flashable zip
- Mobile phone Xperia Z1 (C6903) - with CWM/TWRP to can flash the zip
- USB Cable (make sure your battery is over 75%)
- Attention and patience
The procedure to flash the zip is the same like in other threads (copy the zip to your external SD Card and from there reboot your phone to CWM/TWRP and select - install zip)
The content of zip is
- firmware C6903_14.5.A.0.238_Greece-Cosmote.ftf (i found with XperiFirm on thread wrote by @IaguCool so of course credits go to him)
- UPDATE-SuperSU-v2.46 credits go to @Chainfire
- Z1-lockeddualrecovery2.8.21-RELEASE.flashable credits to @[NUT]
I used PRF Creator to make this zip flashable, credits go to @zxz0O0
The steps i follow to reach a Lollipop 5.0.2 Pre Rooted firmware i found them here http://techbeasts.com/2015/04/14/root-xperia-z1-c6902c6903-14-5-a-0-242-5-0-2-lollipop-with-dual-recovery/
If you have done before flash with dual recovery you may skip the last link, but if it is your first time when you try to do this i highly recommend you to read before each thread including the one on last link.
Disclaimer
- i am not responsible if you run into a bootloop or you damage your mobile. Do it if you know what you do, if not just give up!
Download file
https://mega.nz/#!KY5ilDrY!F_GyaK2tWmZ8GXKRT_ChRvakkT22kCWhGGDc-ZOOpic
lastest release is 14.6.A.0.368, android 5.1.1. Did you choose wrong firmware to creat or wrong tittle of this thread?
hxq88 said:
lastest release is 14.6.A.0.368, android 5.1.1. Did you choose wrong firmware to creat or wrong tittle of this thread?
Click to expand...
Click to collapse
you have right, i check it now and is there also for few countries, i will download it and i will try to make pre rootabe, if i succeed i will upload here, but for now i want to upload as well 238 as i don`t see a thread about it, and so far i was happy with it! Thanks for let me know is out new firmware!
I'm using .270 now. Should I install this(14.5.A.0.283 ) first before I install 14.6.A.0.368 ?
ferbuffer said:
I'm using .270 now. Should I install this(14.5.A.0.283 ) first before I install 14.6.A.0.368 ?
Click to expand...
Click to collapse
No need, you could flash right away 368, just make sure you backup your actual ROM and update your dualrecovery
Sent from my C6903 using XDA Free mobile app
I will be posting my kernel builds here for convenience.
Pre-requisite
Unlocked bootloader with TWRP Recovery installed.
DRM fix must be in place before rebooting to avoid a soft brick.
This DRM patch which was available in sToRm//'s free Xperifix version still works
Features
- Stock based kernel with DT2W enabled.
- Forced encryption disabled.
- Passes Safetynet out of the box.
- Fully working camera (Pie kernel-no DRM fix needed for camera).
- Flashable zip with no need to extract boot.img
- Compatible with any version of Magisk.
Installation
Flash drmpatch.zip then kernel.zip.
You can then flash Magisk if you require it.
Camera doesn't depend on it though.
Flash zip in recovery (don't just extract boot.img as zip has system files to enable DT2W)
Kernel Sources
https://developer.sony.com/develop/open-devices/downloads/open-source-archives
Note. Kernel is compiled as per stock. DT2W is enabled in the DTB, the same parameters as used by the Loire platform.
Downloads
G8141_DT2W-41-kernel.zip
G8142_DT2W-41-kernel.zip
Kernel Requests.
Post the kernel.sin and I will patch it and add it to the OP.
Kernel Requests: View attachment kernel-G8142-205.zip thx !
oneheart said:
Kernel Requests: View attachment 4522264 thx !
Click to expand...
Click to collapse
Added, thanks. Please test and report back (I only own G8141).
shoey63 said:
Added, thanks. Please test and report back (I only own G8141).
Click to expand...
Click to collapse
if i need flash the drmpatch.zip ？
oneheart said:
if i need flash the drmpatch.zip ？
Click to expand...
Click to collapse
Yes, it's required.
it work on G8412 ， thx ！
How can I update to 205 without losing my data?
SilverGamer_YT said:
How can I update to 205 without losing my data?
Click to expand...
Click to collapse
Flash only system.sin - nothing else. Then boot to recovery and flash drmpatch.zip, kernel.zip and then Magisk if you need it.
Reboot and you are done.
@shoey63
dual sim kernel have a problem with wifi.
wifi is off didn't turn on
karrouma said:
@shoey63
dual sim kernel have a problem with wifi.
wifi is off didn't turn on
Click to expand...
Click to collapse
Kernel itself is unmodified, and ramdisk changes don't touch wifi settings at all. Seems to be a hardware or software problem with Sony sd835 as per various complaints here https://talk.sonymobile.com/t5/Xperia-XZ1-Compact/Wifi-connection-problem/td-p/1315030
Adding to the confusion is that the issue is sporadic, intermittent and apparently device specific. Some users suffer badly, whereas others have no problems.
At any rate, there is nothing I can do about it.
shoey63 said:
Kernel itself is unmodified, and ramdisk changes don't touch wifi settings at all. Seems to be a hardware or software problem with Sony sd835 as per various complaints here https://talk.sonymobile.com/t5/Xperia-XZ1-Compact/Wifi-connection-problem/td-p/1315030
Adding to the confusion is that the issue is sporadic, intermittent and apparently device specific. Some users suffer badly, whereas others have no problems.
At any rate, there is nothing I can do about it.
Click to expand...
Click to collapse
Thank you for you work.
One guy tell me to flash CE1 firmware
I will trt
Hi, thank you for time to do this kernel @shoey63 nice work
Just a little beginner's question ... what is the best kernel for my rom stock (yours ot androplus kernel),
from what I read your kernel is not changed at all ?
Castiglionais said:
Hi, thank you for time to do this kernel @shoey63 nice work
Just a little beginner's question ... what is the best kernel for my rom stock (yours ot androplus kernel),
from what I read your kernel is not changed at all ?
Click to expand...
Click to collapse
For tweaking and double tap to wake - Androplus. For the stability of stock - mine.
shoey63 said:
I will be posting my kernel repacks here for convenience.
Pre-requisite
DRM fix must be in place before rebooting to avoid a soft brick.
This DRM patch which was available in sToRm//'s free Xperifix version still works.
Features
- Pure stock kernel with only ramdisk changes to enable DRM fix plus solve SafetNet and Magisk issues.
- Passes Safetynet out of the box.
- Fully working camera (No green Pic's).
- Flashable zip with no need to extract boot.img
- Compatible with any version of Magisk.
Installation
Flash drmpatch.zip then kernel.zip.
You can then flash Magisk if you require it.
Camera doesn't depend on it though.
Downloads
drmpatch.zip
G8141-205
G8142-205dual
Click to expand...
Click to collapse
sir what extra this forbidden xperifix does?
i mean if i have maple kernel and those 3 files from system.sin, and using @serajr 's modified script of TOBIAS , I create one boot.img file and flash it and flash the drmpatch.zip (given) here by you via twrp...
WILL it work?
i don't have xzp
if okay, plz reply
YasuHamed said:
sir what extra this forbidden xperifix does?
i mean if i have maple kernel and those 3 files from system.sin, and using @serajr 's modified script of TOBIAS , I create one boot.img file and flash it and flash the drmpatch.zip (given) here by you via twrp...
WILL it work?
i don't have xzp
if okay, plz reply
Click to expand...
Click to collapse
Not quite OK. You also need to patch init.environ.rc as per this post https://forum.xda-developers.com/showpost.php?p=74310718&postcount=43
I tried flashing SuperSU 2.79 and 2.82 onto my G8142 which runs oreo but it always results in the phone getting stuck at the Sony logo right after the bootloader unlock warning.
Does the kernel not need to be patched for SU to work?
jianlin3062 said:
I tried flashing SuperSU 2.79 and 2.82 onto my G8142 which runs oreo but it always results in the phone getting stuck at the Sony logo right after the bootloader unlock warning.
Does the kernel not need to be patched for SU to work?
Click to expand...
Click to collapse
You could try this one. It is from M-ROM v1.5, a Chinese rom.
I would flash the kernel.zip again, then the SuperSU.zip then the drmpatch.zip and wipe cache and dalvik and see how you go.
jianlin3062 said:
I tried flashing SuperSU 2.79 and 2.82 onto my G8142 which runs oreo but it always results in the phone getting stuck at the Sony logo right after the bootloader unlock warning.
Does the kernel not need to be patched for SU to work?
Click to expand...
Click to collapse
You must try this version this is created for xperia phones:https://forum.xda-developers.com/attachment.php?attachmentid=4164510&d=1496008012
help
I can not understand the order in which I have to do things
Should I unlock the bootloader and then?
I must install the recovery by adb or first the kernel
I come from samsung and the difficulty here is greater and there is much less information, if someone could help me I would appreciate it. I have the latest version of oreo the .205