help as i am a noob i am in need of a guide on how to put a custom rom on my mobile can any body tell me were i should p.s please dont just say google it
Dude is your WFS rooted???
If yes then go to recovery
1) clear data
2)clear cache partition
3)go to advanced and clear dalvik cache
4)go back install zip from sd card
6)choose zip from sd card and find the zip file you want to install and install it .
Sent from my Wildfire S A510e using xda premium
What he said
Sent from my HTC Wildfire S using xda app-developers app
bason2000 said:
help as i am a noob i am in need of a guide on how to put a custom rom on my mobile can any body tell me were i should p.s please dont just say google it
Click to expand...
Click to collapse
ok firstly follow this guide to unlock your bootloader.
then install this recovery here by downloading the updated version. placing it onto the "root" of your sdcard. ( that is to not put it in any folder of any kind on the sdcard) and boot into the bootloader by using volume down + power after pulling the battery out.
if this fails you will have to fastboot flash the img, but more on that if you need to
once you have installed the recovery take out the sdcard and boot back into your bootloader (vol- + power) and then scroll down to recovery with the volume buttons and the push power. reinsert your sdcard.
scroll down to back up and make a back up of your phone!!! this is vital, as should you muck up you can simply go back to this
then select your rom of choice and place it on the root of your sdcard. while your accessing your sdcard delete the PG76img.zip unmount your sdcard and continue.
in recovery scroll down to wipe/format. wipe everything aside from your sdcard. then install your rom, and Gapps if it is an aosp type rom.
reboot the device and wait.
if it doesnt boot up in ten minutes reboot to your bootloader and enter recovery. restore your backup and then come back here for help with a list of everything youve done
job done
Tired of searching for a complete Guide to Flash JellyBlastv3 on your GT-S5360?
Well, I have something for you::::
Read On....
Warning: The Below Steps are only for Samsung Galaxy Y, GT-S5360
Performing any of the steps shall Void the Warranty of Your Device.
I am not responsible for any damage you cause to your Device or emotional loss or anything.
You are solely responsible for you actions.
The Following procedure has been tested by me and it is working correctly.
Warnings and Important Tips:
1. The process may and will erase all your data present on the device. Better backup your contacts, Messages, Calendar entries, Notes Etc. You may use Super Backup, Go Backup or SMS Backup & Restore. There are several other apps in the Market. I would recommend to backup using multiple apps.
2. A Computer should be within reach with internet. Also have a USB Cable. Wi-Fi is recommended.
3. Make sure the system is running Stock ROM and Stock Kernel.
4. Also make sure you are running latest version of android available. On Galaxy Y, it is 2.3.6
5. If not, you can update, by going into settings>about phone>software update. Sign in with Samsung Account. 6. Before proceeding further, make sure that the phone is fully charged (Recommended 70% at least). High Chances of damage are there if the device runs out of juice during flashing.
7. Proceed with caution. Avoid confusion. Follow the steps! Never Jump to next step before completing first!
8. Within Procedures if you think the battery is not enough (>70%), you can charge it before proceeding to next procedure. The Phone can’t be charged within an ongoing procedure.
9. Enable the USB Debugging option. Go to Settings>Development>USB Debugging. Check it every time.
10. It took me considerable time to type the detailed steps to make it easy for even a beginner. Be Generous.
DO NOT FORGET TO PRESS THE THANKS BUTTON! :laugh:
I. Root
Rooting is a process by which you can get root access or administrator privileges to your Android phone and can flash tweaks, custom ROMs, custom kernels, install additional applications which requires root, use firewall etc.
Root will void your phone’s warranty but it doesn’t matter you can get it back! (Google unroot)
1. Download the the update.zip file to your SD Card (not in any folder). I have attached it with the post.
2. Switch off your phone & boot into recovery mode.
3. Press Vol Up + Power Key + Home button together at the same time to boot in recovery mode.
4. Touch screen is disabled here.
5. Use volume keys for scrolling & home button for selection.
6. Select Apply update from SD card.
7. Select update.zip (which you have downloaded).
8. When it shows Installed from SD Card complete written.
9. Select reboot system now.
10. Your phone will restart & first boot may take 5 minutes. (Mine took a few seconds!)
11. Check for an application Superuser and open it.
12. Go to Menu > Preferences > SU Binaries> Update binaries.
13. SU Binaries will update. (You need active data connection or Wi-Fi)
14. When it get updated, restart your phone.
You’re done! Your phone is now rooted.
Warning: Do not delete Superuser or you will lose your root!
II. Flash ClockWorkMod
ClockWorkMod is a Custom Recovery which lets you Flash Custom ROM, Kernels etc.
Note: This is temporary. Every time you need CWM, you have to flash it again. (For your convinience, keep it in the SD)
Instructions:
1. Enable USB Debugging by going to Menu -> Settings -> Applications -> Development - Enable USB Debugging.
2. Download the CWM Recovery.zip file and Place that file on the root directory of your SD card. (Attached)
3. Switch off your phone .Then boot into recovery mode, (hold Volume up button + Home button + Power button).
6. Select "apply update from SD card ", find the zip file you copied to your SD card earlier.
Once done, it will give you the option to reboot your phone, reboot and you're done!
You got CWM installed, you can now flash custom ROMs.
III. Backup Stock ROM
In case, if anything happens to your device while flashing Custom ROM, backup of Stock ROM serves as a contingency plan. The Backup can be used to recover damaged device via Odin. (Now don’t ask me what’s Odin)
It can also be used to return to the Original State if ever you wish to revert back.
1. Boot into CWM by Flashing CWM again.
2. Go to Backup/Restore
3. Select Backup Current ROM. It will take a while and then it’s Done! The size of the Backup File depends upon the no. of apps installed. Generally should be around 200-400 MB.
IV. Flash Custom ROM (JellyBlastv3 by Avijit Ghosh)
DOWNLOADS: http://forum.xda-developers.com/showthread.php?t=1679563
INSTALLATION GUIDE:
1. Make sure that you're on Stock kernel. Stock = Factory version.
2. Remove a2sd or data2sd and format your 2nd partition if you have it.
3. Place the above file to your SD Card (NOT IN ANY FOLDER!!!)
4. Switch off your phone.
5. Flash Clockwork mode.
6. Wipe data/factory reset.
7. Wipe cache partition.
8. Go to Advanced options and Wipe Dalvik cache.
9. Go to mounts and storage->select mount/system and mount/data.
10.Now choose: Install zip from sd card.
11. Choose JELLYBLAST V3.signed.zip and choose yes.
12. Keep your fingers crossed and pray.
It will be installed. Now reboot your phone. First boot will take time. Be patient.
V. Install OTA
Over The Air Updates are the updates that are released after the ROM to fix bugs and problems or to make minor changes.
Important: Apply the OTA Updates in serial-wise manner to avoid bricking.
1. Download OTA 1, OTA 2, OTA 3, OTA 4.1 and OTA 5 and place them in your SD Card.
2. Boot into CWM, Select “Install .zip from SD ” and select OTA 1. After Completion, Device will Reboot.
3. Repeat Similar Steps OTA 2, 3,4, and 5.
4. You are Done! Now you are Running the latest version of the Custom ROM available.
5. You can check for updates in OTA updater.
VI. Partitioning SD Card
On SGY GT-S5360, the Internal Memory is too low (190 MB). Every time you try to update the apps or try to Install new apps, you get the annoying message saying “ Internal Memory Full, delete some apps”. This is where Link2sd comes to the rescue!
There are also Similar apps available on the Market, but here we will be using Link2SD.
There are several ways to partition SD card, but here we will be using CWM.
Note: You need a rooted device, well doesn’t matter we have already rooted.
Note: This method will erase all your data on SD, so better backup it
1. Boot into CWM recovery.
2. Select Advanced options.
3. Select Partition SD Card.
4. Choose the partition size. (1024 recommended)
5. Choose the Swap size. (0 M)
6. Select “Yes”. It will take a while and then you are done! Reboot your phone.
7. Open Link2SD (or Download it from the Market). A pop-up will appear, choose ext3 (ext4 is fastest but ext3 is most compatible). Then Reboot.
8. Open Link2SD, Go to settings , then tick Auto Link.
9. Below in Auto Link settings click on all the three- Link App file, Link Dalvik Cache, Link library files.
10. Also set the Default location to external.
11. You are done. You can also link some of the existing user apps to the partition.
Now all your user applications will be linked to the SD Card, saving your precious internal memory space
Also Don’t forget to Grant Link2SD superuser permissions.
YOU ARE DONE! RESTORE YOUR BACKUP & ENJOY!!
NOW DON’T BE SELFISH! PRESS THE THANKS BUTTON!!!
The ROM has been made available by Dev Avijit Ghosh. Do not forget to thank the developer for his effort.
For Screenshots and Downloads Visit :
http://forum.xda-developers.com/showthread.php?t=1679563
U posted in the wrong section only questions go in q and a also there are many other guides for this I'll report for it to be moved
Phone Slow? go ------>HERE<------
_____________________________________
"All my life I had one dream to achieve many many goals"
Here I have attached the files for Rooting (update_root.zip) and Clockworkmod recovery. Download them from here. :good:
zaeemsheikh said:
It has been already moved.
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Smh was that addressed to me? If so would it have been crazy to assume it moved after I reported it and me and the OP weren't crazy because as u see he thanked me
Phone Slow? go ------>HERE<------
_____________________________________
"Google took 4 years to reach android 4.0.4 and apple to reach android 1.6"
You have forgotten the most important step in flashing any zip file in cwm
Go into mounts and storage and mount system and data before you choose a zip from sd card
Also the links to jb v3 have been removed due to rule brakes - I suggest you base your guide on another rom
marcussmith2626 said:
You have forgotten the most important step in flashing any zip file in cwm
Go into mounts and storage and mount system and data before you choose a zip from sd card
Also the links to jb v3 have been removed due to rule brakes - I suggest you base your guide on another rom
Click to expand...
Click to collapse
Well, I myself flashed the zip without mounting system and data. Would you please care to tell what does this mount system and data do? Anyways thanks, I will edit my post.
Also why have the links been removed?
TingTingin said:
U posted in the wrong section only questions go in q and a also there are many other guides for this I'll report for it to be moved
Phone Slow? go ------>HERE<------
_____________________________________
"All my life I had one dream to achieve many many goals"
Click to expand...
Click to collapse
Alright.
zaeemsheikh said:
Well, I myself flashed the zip without mounting system and data. Would you please care to tell what does this mount system and data do? Anyways thanks, I will edit my post.
Also why have the links been removed?
Click to expand...
Click to collapse
Mount system allows cwm to write to the system folder of your phone
Some versions of cwm when cwm is flashed have system already mounted which is probably why you got away with it
If system is not mounted the zip will still appear to of flashed but nothing will of changed
zaeemsheikh said:
Well, I myself flashed the zip without mounting system and data. Would you please care to tell what does this mount system and data do? Anyways thanks, I will edit my post.
Also why have the links been removed?
Click to expand...
Click to collapse
the thing is in 'permanent' cwm kernels(like savie) /system won't be auto mounted therefore you'll have to mount it manually for successfull flash as cwm can't write onto an un mounted partition . The problem doesn't seem to exist with temporary cwms.
CWM Rom Manager
Hey I would just like to know! I used this then after some reading I would like to install the rom manager from Play Store. I tried it but it seems that my Galaxy Y is not supported then it asked me if I already installed one. Is it ok to also use rom manager with this method?
I already change my ROM feom stocm to cm7, then i decide to partition my memory
But sadly after i did the partition steps you provided here, i lost 2gb from my sd and i check the link2SD storage info and found 2nd partition not mount. I click cleanup 2nd partirion too but i receive error message /data/sdext2 mount not found. I tried to mount it in CWM but nothing happens, what should i do? My internal is already full now
..
:laugh:Very good post.
Is this guide tested and works?
Nice
Thanksss for sharingg
But my eset find virus in jelly blast v3 ROM
But I like this ROM battery performance is awesome...
Sent from my P2 using XDA Premium 4 mobile app
Excellent Guide
Hey,
Thank you very much for providing such a nice guide. I did it and now all I have is a new custom ROM and its supported features. Also thank you to those who make all stuffs necessary for installing new custom ROM. I am really happy to use my new custom ROM.
:good:
same question
reezer16 said:
Hey I would just like to know! I used this then after some reading I would like to install the rom manager from Play Store. I tried it but it seems that my Galaxy Y is not supported then it asked me if I already installed one. Is it ok to also use rom manager with this method?
Click to expand...
Click to collapse
:cyclops: i wanna ask the same question ..
---------- Post added at 12:24 PM ---------- Previous post was at 12:09 PM ----------
Where to download the jellyblast v3.zip
Link on the page is not working...
M a beginner
Sent from my Galaxy Nexus
Unable to update OTA update on my galaxy y..
Can anybody plz tell me from where to download the manual updates like ota 1,2,3,4,5,
Sent from my Galaxy Nexus
zaeemsheikh said:
Tired of searching for a complete Guide to Flash JellyBlastv3 on your GT-S5360?
Well, I have something for you::::
Read On....
Warning: The Below Steps are only for Samsung Galaxy Y, GT-S5360
Performing any of the steps shall Void the Warranty of Your Device.
I am not responsible for any damage you cause to your Device or emotional loss or anything.
You are solely responsible for you actions.
The Following procedure has been tested by me and it is working correctly.
Warnings and Important Tips:
1. The process may and will erase all your data present on the device. Better backup your contacts, Messages, Calendar entries, Notes Etc. You may use Super Backup, Go Backup or SMS Backup & Restore. There are several other apps in the Market. I would recommend to backup using multiple apps.
2. A Computer should be within reach with internet. Also have a USB Cable. Wi-Fi is recommended.
3. Make sure the system is running Stock ROM and Stock Kernel.
4. Also make sure you are running latest version of android available. On Galaxy Y, it is 2.3.6
5. If not, you can update, by going into settings>about phone>software update. Sign in with Samsung Account. 6. Before proceeding further, make sure that the phone is fully charged (Recommended 70% at least). High Chances of damage are there if the device runs out of juice during flashing.
7. Proceed with caution. Avoid confusion. Follow the steps! Never Jump to next step before completing first!
8. Within Procedures if you think the battery is not enough (>70%), you can charge it before proceeding to next procedure. The Phone can’t be charged within an ongoing procedure.
9. Enable the USB Debugging option. Go to Settings>Development>USB Debugging. Check it every time.
10. It took me considerable time to type the detailed steps to make it easy for even a beginner. Be Generous.
DO NOT FORGET TO PRESS THE THANKS BUTTON! :laugh:
I. Root
Rooting is a process by which you can get root access or administrator privileges to your Android phone and can flash tweaks, custom ROMs, custom kernels, install additional applications which requires root, use firewall etc.
Root will void your phone’s warranty but it doesn’t matter you can get it back! (Google unroot)
1. Download the the update.zip file to your SD Card (not in any folder). I have attached it with the post.
2. Switch off your phone & boot into recovery mode.
3. Press Vol Up + Power Key + Home button together at the same time to boot in recovery mode.
4. Touch screen is disabled here.
5. Use volume keys for scrolling & home button for selection.
6. Select Apply update from SD card.
7. Select update.zip (which you have downloaded).
8. When it shows Installed from SD Card complete written.
9. Select reboot system now.
10. Your phone will restart & first boot may take 5 minutes. (Mine took a few seconds!)
11. Check for an application Superuser and open it.
12. Go to Menu > Preferences > SU Binaries> Update binaries.
13. SU Binaries will update. (You need active data connection or Wi-Fi)
14. When it get updated, restart your phone.
You’re done! Your phone is now rooted.
Warning: Do not delete Superuser or you will lose your root!
II. Flash ClockWorkMod
ClockWorkMod is a Custom Recovery which lets you Flash Custom ROM, Kernels etc.
Note: This is temporary. Every time you need CWM, you have to flash it again. (For your convinience, keep it in the SD)
Instructions:
1. Enable USB Debugging by going to Menu -> Settings -> Applications -> Development - Enable USB Debugging.
2. Download the CWM Recovery.zip file and Place that file on the root directory of your SD card. (Attached)
3. Switch off your phone .Then boot into recovery mode, (hold Volume up button + Home button + Power button).
6. Select "apply update from SD card ", find the zip file you copied to your SD card earlier.
Once done, it will give you the option to reboot your phone, reboot and you're done!
You got CWM installed, you can now flash custom ROMs.
III. Backup Stock ROM
In case, if anything happens to your device while flashing Custom ROM, backup of Stock ROM serves as a contingency plan. The Backup can be used to recover damaged device via Odin. (Now don’t ask me what’s Odin)
It can also be used to return to the Original State if ever you wish to revert back.
1. Boot into CWM by Flashing CWM again.
2. Go to Backup/Restore
3. Select Backup Current ROM. It will take a while and then it’s Done! The size of the Backup File depends upon the no. of apps installed. Generally should be around 200-400 MB.
IV. Flash Custom ROM (JellyBlastv3 by Avijit Ghosh)
DOWNLOADS: http://forum.xda-developers.com/showthread.php?t=1679563
INSTALLATION GUIDE:
1. Make sure that you're on Stock kernel. Stock = Factory version.
2. Remove a2sd or data2sd and format your 2nd partition if you have it.
3. Place the above file to your SD Card (NOT IN ANY FOLDER!!!)
4. Switch off your phone.
5. Flash Clockwork mode.
6. Wipe data/factory reset.
7. Wipe cache partition.
8. Go to Advanced options and Wipe Dalvik cache.
9. Go to mounts and storage->select mount/system and mount/data.
10.Now choose: Install zip from sd card.
11. Choose JELLYBLAST V3.signed.zip and choose yes.
12. Keep your fingers crossed and pray.
It will be installed. Now reboot your phone. First boot will take time. Be patient.
V. Install OTA
Over The Air Updates are the updates that are released after the ROM to fix bugs and problems or to make minor changes.
Important: Apply the OTA Updates in serial-wise manner to avoid bricking.
1. Download OTA 1, OTA 2, OTA 3, OTA 4.1 and OTA 5 and place them in your SD Card.
2. Boot into CWM, Select “Install .zip from SD ” and select OTA 1. After Completion, Device will Reboot.
3. Repeat Similar Steps OTA 2, 3,4, and 5.
4. You are Done! Now you are Running the latest version of the Custom ROM available.
5. You can check for updates in OTA updater.
VI. Partitioning SD Card
On SGY GT-S5360, the Internal Memory is too low (190 MB). Every time you try to update the apps or try to Install new apps, you get the annoying message saying “ Internal Memory Full, delete some apps”. This is where Link2sd comes to the rescue!
There are also Similar apps available on the Market, but here we will be using Link2SD.
There are several ways to partition SD card, but here we will be using CWM.
Note: You need a rooted device, well doesn’t matter we have already rooted.
Note: This method will erase all your data on SD, so better backup it
1. Boot into CWM recovery.
2. Select Advanced options.
3. Select Partition SD Card.
4. Choose the partition size. (1024 recommended)
5. Choose the Swap size. (0 M)
6. Select “Yes”. It will take a while and then you are done! Reboot your phone.
7. Open Link2SD (or Download it from the Market). A pop-up will appear, choose ext3 (ext4 is fastest but ext3 is most compatible). Then Reboot.
8. Open Link2SD, Go to settings , then tick Auto Link.
9. Below in Auto Link settings click on all the three- Link App file, Link Dalvik Cache, Link library files.
10. Also set the Default location to external.
11. You are done. You can also link some of the existing user apps to the partition.
Now all your user applications will be linked to the SD Card, saving your precious internal memory space
Also Don’t forget to Grant Link2SD superuser permissions.
YOU ARE DONE! RESTORE YOUR BACKUP & ENJOY!!
NOW DON’T BE SELFISH! PRESS THE THANKS BUTTON!!!
The ROM has been made available by Dev Avijit Ghosh. Do not forget to thank the developer for his effort.
For Screenshots and Downloads Visit :
http://forum.xda-developers.com/showthread.php?t=1679563
Zaeem Sheikh
FOLLOW the steps correctly and you won’t need me!
Click to expand...
Click to collapse
Hi,
i am new to this. Tried flashing a custom rom but after rebooting my phone, i am still running on my old rom. What should i do now?
Please help me.
:crying:
Happy28288 said:
Hi,
i am new to this. Tried flashing a custom rom but after rebooting my phone, i am still running on my old rom. What should i do now?
Please help me.
:crying:
Click to expand...
Click to collapse
Somebody didn't mount system before flashing a zip in cwm did they
Failing to mount system = nothing will change
Guide & Mod:Telcast G18 mini 3G tablet [CWM Recovery][Stock Firmware][Partition Data]
Guide & Mod : Telcast G18 mini 3G tablet [CWM Recovery][Stock Firmware][Partition Data]
Hello,
I got myself a nice 7.9 inch Android 4.2.2 Tablet [16Gb].
This is a new tablet so no rom/mod information about it so I decided to put few things together.
I messed up my Modem/Radio trying to make CMW mod recovery but got lucky and found a Chinese forum with a stock rom.
That gave me confidence to mod like hell till I got myself a working CWM Recovery
Youtube Video of tablet
http://www.youtube.com/watch?v=Ybz6yymWM7I&feature=c4-overview&list=UUUAnm9j-J2x3_nDDDxO2nlQ
Warning! use this guide at your own risk.
Root Guide:
Just download Framaroot apk and run it! It will ask you to reboot and that’s it...You are Rooted!.
CWM Mod Recovery Guide:
Download the G18mini Recovery and flash with MobileUncle.apk
Place the .img in the root of SD then launch the app and click update recovery. Tablet will then reboot into CWM . Do a full nandroid back up!! You will need it in the future or if you want to partition.
Or Flash with SP Flash tool (can find easily on XDA and included in full firmware DL)
Partition /data for more storage Guide:
This tablet only has 1GB for apps which is lame!
Make sure you have Nandroid Backup before doing this and copy the backup to external SD (required)!!! or use Rom manager to backup to external SD!
Install meteos-mtk6589-rom-edit-8gb-16gb-en APK
Run it and click the 4GB and follow the instructions and reboot into recovery.
Wipe/reset then do an Nandroid restore from external SD
It will show failed to restore SDCARD but don’t worry, boot into the tablet and format/erase internal (Flash storage)
Turn off the tablet then hold volume up and power to boot recovery. Do a full nandroid restore again from external SD…DONE!
You will now have 3.9GB for apps and 9.7GB internal storage!
Restore to Factory:
Stock Firmware DL has a PDF in chinese but screenshots should be enough to restore the tablet top factory stock (it uses SP Flash)
Files:
Framaroot
Direct DL http://d-h.st/tKB
http://forum.xda-developers.com/showthread.php?t=2130276
Thanks Alephzain
-------------------
G18 Mini CWM Recovery
http://d-h.st/Lhm
--------------------
Mobileuncle Apk
Playstore https://play.google.com/store/apps/details?id=com.mobileuncle.toolbox&hl=en_GB
Direct DL http://d-h.st/xGU
----------------
MTkDroidTools_v252d supports G18mini
http://d-h.st/AoH
-------------------
Original Firmware
Direct DL http://d-h.st/eQC
(removed Chinese characters)
Thanks zolhaohao90 and ivandy (http://padbbs.zol.com.cn/)
Original DL http://dl.vmall.com/c09bop8j5b
--------------------
meteos-mtk6589-rom-edit-8gb-16gb-en
Direct DL http://d-h.st/IyT
Thanks Meteos (movilesdualsim.com)
-------------------
Other threads which will help you!
How to backup your tablet
http://forum.xda-developers.com/showthread.php?t=2160490
What is CWM
http://forum.xda-developers.com/showthread.php?t=1587607
Hit thanks if it has helped! also Thanks to everyone who has helped me. :laugh:
大神，我的机型和你一样
但是，要命的是我想找中文的原装rom包找不到啊~
links are dead
Hey
Can enyone make new links becouse this one are dead for example :
G18 Mini CWM Recovery
thx a lot
namissan said:
Hey
Can enyone make new links becouse this one are dead for example :
G18 Mini CWM Recovery
thx a lot
Click to expand...
Click to collapse
http://d-h.st/GA8 here you go
can not found SDcard or external card and can not loading said:
to backup to external SD!
Install meteos-mtk6589-rom-edit-8gb-16gb-en APK
Run it and click the 4GB and follow the instructions and reboot into recovery.
Wipe/reset then do an Nandroid restore from external SD
It will show failed to restore SDCARD but don’t worry, boot into the tablet and format/erase internal (Flash storage)
Turn off the tablet then hold volume up and power to boot recovery. Do a full nandroid restore again from external SD…DONE!
You will now have 3.9GB for apps and 9.7GB internal storage!
Click to expand...
Click to collapse
after I followed this step, i cannot enter the os. only can enter the recovery.
but i can not restore from sdcard, external card.
it said that it can not found sdcard nor external card...
can you help me??
thank you
firmware
hi...need firmware for G18 mini (C5B9) to reflash rom...anyone have link to it...link above is broken...
thank
dl the original from teclast keep popping 'incorrect scatter file format'...any solution...
thank
messed up but found the original firmware
Hello guys, I'm new at breaking into Android devices, and it seems I messed up when trying to follow this Guide and Mod.
Somehow I didn't do this step:
-----------
CWM Mod Recovery Guide:
Download the G18mini Recovery and flash with MobileUncle.apk
Place the .img in the root of SD then launch the app and click update recovery. Tablet will then reboot into CWM . Do a full nandroid back up!! You will need it in the future or if you want to partition.
Or Flash with SP Flash tool (can find easily on XDA and included in full firmware DL)
-------------
After root i performed the partition. And whiped data. So it seems that all data is erased, I manage to come to the recovery menu. When i afterwards manually copied the G18mini Recovery.img file to the root of my sd-card, and tried to boot find the update, it says no SD card can be found...
one option it gave was to adb sideload data into the tablet. Tried that, but did not know what data i should sideload into it. It seems it need a file.zip.
Somebody asked for the firmware, i found the original firmware from modecom dot eu -> support -> download -> tablets
I tried also to istall that, but did not succeed. It seems the drivers won't load into my windows 8.1 computer.
Any suggestion how to proceed? Can i get the original firmware installed by using Android SDK Manager? I hope I'll be able to save the tablet...
Did you solve it?
s2mishappy said:
after I followed this step, i cannot enter the os. only can enter the recovery.
but i can not restore from sdcard, external card.
it said that it can not found sdcard nor external card...
can you help me??
thank you
Click to expand...
Click to collapse
Me cannot restore from sdcard either. Does it mean that one should erase sdcard while in recovery mode? I did that, but the externat sd card won't still work.
simme_ said:
Me cannot restore from sdcard either. Does it mean that one should erase sdcard while in recovery mode? I did that, but the externat sd card won't still work.
Click to expand...
Click to collapse
no solution. hope someone can post solution for this. thank you
Still no working link for the g18 min recovery. Could you please update it again?
thank you very much
HTC EVO 4g Sprint cant figure out how to get it back. please help will pay. dont even care about the money just need it fixed asap. thanks
What did you do? Can you still boot to recovery? If yes you can flash a rom.
Sent from my SPH-L900 using XDA Free mobile app
Help
jpisini said:
What did you do? Can you still boot to recovery? If yes you can flash a rom.
Sent from my SPH-L900 using XDA Free mobile app
Click to expand...
Click to collapse
I unlocked bootloader with windroid tool. Then I flashes twrp. Then this being my first time messing with an android in years I went and just grabbed the first rom I thought I could use, do to the fact that I had done no backup no nandroid anything so I flashed a rom and after it did it every time I tries to flash different rom because it said the rom I did first failed. So everytime I tries to do anything else with windroid it says there is a log file in the logs folder. Send this to windycity's forum so it can be tAken care of. But I couldn't find this file or where to submit the file so I thought if I just reset the phone back to factory I could restart. And after resetting it multiple times it still said, there is a log file in the logs folder send this to Windy City. So since I do still have the twrp tool that I can use I went in there and found that it has to rm -f delete everything Linux code so I did that. And since I've done that all I can do is get to bootloader and twrp. But the so is deleted. So basically nothing works. I can't figure out how to get the sd to mount or it won't mount for whAtever reason. And since the phone is wiped it won't enable USB debugging to connect to computer. I can get it to start to enable and connect for a second but not long enough for it to do anything. And I believe it's a htc evo 4g sprint. So that's the situation. The next thing I was gunn try was to go buy a mini sd card reader so I can mount it to computer and then put the rom in there. This **** is so confusing and ridiculous. I mean I can jailbreak an apple device no problem. But holy mother of God androids are the most insanely retarded phones to root. Drivers, adb, sdk...... Anyways if u can help let me know because there's a million roms and kernels out there and I don't know what build to use and how to set it up and the whole kernel process sounds confusing.
Do this. Go to the link below. Look at the second post. Go to the "Current Release" section and download either the stock rooted odex or deodex ROM, doesn't matter. Put the ROM zip on your external SD card. You can do this with the mount option in TWRP (select the mount option then select your external SD card from the menu. You should then be able to transfer the ROM zip from your computer directly to your phone), or just use a card reader to transfer the file from your computer to your SD card, then put the card back into your phone. Boot into TWRP and go to the wipe menu. Do a wipe of system, data, Dalvik & cache. Once you've done this, go to the install option, then locate the ROM zip you placed on your SD card. Flash the ROM. Once the install completes, reboot the phone. The first boot will take a few minutes so be patient. Afterwards the phone should boot to the OS.
http://forum.xda-developers.com/showthread.php?t=1671395
Also, USB debugging is only useful when the phone is actually booted to the OS. It doesn't matter that it isn't enabled for your particular dilemma. If all else fails, shoot me a PM and I may have something else that can get you up and running.
Magnum_Enforcer said:
Do this. Go to the link below. Look at the second post. Go to the "Current Release" section and download either the stock rooted odex or deodex ROM, doesn't matter. Put the ROM zip on your external SD card. You can do this with the mount option in TWRP (select the mount option then select your external SD card from the menu. You should then be able to transfer the ROM zip from your computer directly to your phone), or just use a card reader to transfer the file from your computer to your SD card, then put the card back into your phone. Boot into TWRP and go to the wipe menu. Do a wipe of system, data, Dalvik & cache. Once you've done this, go to the install option, then locate the ROM zip you placed on your SD card. Flash the ROM. Once the install completes, reboot the phone. The first boot will take a few minutes so be patient. Afterwards the phone should boot to the OS.
http://forum.xda-developers.com/showthread.php?t=1671395
Also, USB debugging is only useful when the phone is actually booted to the OS. It doesn't matter that it isn't enabled for your particular dilemma. If all else fails, shoot me a PM and I may have something else that can get you up and running.
Click to expand...
Click to collapse
Can you still boot into recovery