Hello,
I have a bricked SGH-I467 that have the battery low.
I can't reflash it as it always blinking even if I use an USB cable, (no recharge).
I would like to know if somebody have an idea to how to solve this issue....
I think I have to charge the battery from an external source before all but my search about the SAMSUNG SP3770E1H 4600mAh pack was unsucccessfull ...
< www dot ebay dot com / itm / New-Original-Battery-For-N5100-Galaxy-Note-8-0-SP3770E1H- / 350903450418 > only new items, no way to charge them....
Any help will be appreciate...
Thanks,
I had to get my usb connection replaced. Maybe that's what you need to do as well?
Galaxy Note 8.0 Xposed Build N5120XXDNE4 / Baseband N5120XXCMG7 / Kernel SphereKat-Rev4.3 on Telstra LTE
cheryanne said:
I had to get my usb connection replaced. Maybe that's what you need to do as well?
Click to expand...
Click to collapse
Do you think that can be that?
The power loading seems to be controlled by a part of the Boot Loader software without let the power from USB to directly feed the battery ....
If anyone can confirm/infirm that ...
If not, as it's a 3.75v Lithium-Ion technology (17.25WH 4600mAh), if I found a charger, that can help me but I'm not sure for the connectors.
There is 2 dark wires, 2 blue and 2 red, so can I deduce that means 2 units in // ? perhaps ...
Thanks
cheryanne said:
I had to get my usb connection replaced. Maybe that's what you need to do as well?
Galaxy Note 8.0 Xposed Build N5120XXDNE4 / Baseband N5120XXCMG7 / Kernel SphereKat-Rev4.3 on Telstra LTE
Click to expand...
Click to collapse
I need to replace the USB port on a i467. Where did you get the part?
Sent from my SAMSUNG-SGH-I337 using Xparent Cyan Tapatalk 2
DozenMadder said:
I need to replace the USB port on a i467. Where did you get the part?
Sent from my SAMSUNG-SGH-I337 using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
I went to our local phone repair kiosk guy and he did it for me. It wasn't a part specifically for the Note 8.0 of course, but it's been working well for about 6 months now so I'm not complaining.
Galaxy Note 8.0 Xposed Build N5120XXDNE4 / Baseband N5120XXCMG7 / Kernel SphereKat-Rev5.1 on Telstra LTE
Hello DozenMadder,
Perhaps what you are looking for can be purchased here =>
www . aliexpress . com/item/10pcs-lot-good-quality-flex-cable-for-Samsung-Galaxy-Note-8-0-N5100-N5110-USB-battery/1910485899.html[/url]
eclos said:
Hello DozenMadder,
Perhaps what you are looking for can be purchased here =>
www . aliexpress . com/item/10pcs-lot-good-quality-flex-cable-for-Samsung-Galaxy-Note-8-0-N5100-N5110-USB-battery/1910485899.html[/url]
Click to expand...
Click to collapse
I posted a help thread on charging / battery drain, unfortunately the mod did not think it was worth a sticky.
So I will reiterate my feelings again about Samsung and Kindle USB charging cables.
I have gone through 1 Kindle and 2 Samsung OEM cables. One Samsung cable almost caught fire during charging. All because of the weak design of the mini USB head and cables themselves.
The best cables are Sony / Ericson and Blackberry. They are heavier and well made, and also they include a ferrite core at each end for EMI / RFI shielding. They cost about the same as OEM and are a bit longer as well. The only drawback is they are black instead of white.
Related
Hi everyone!I have a Galaxy Note 2 Live Demo Unit and it has Android 4.1.1.I tried to update it to 4.1.2 with Kies but it said that there isn't any software update for my device.I went at a GSM service,and they said that I have to be careful,because The Normal Note 2's software can brick my device and I have to use a Demo Software.Does anyone know a Demo Version of Android 4.1.2 for Note 2?I'm new on XDA so I don't even know a lot of things...
Ucigasul de Plictiseala said:
Hi everyone!I have a Galaxy Note 2 Live Demo Unit and it has Android 4.1.1.I tried to update it to 4.1.2 with Kies but it said that there isn't any software update for my device.I went at a GSM service,and they said that I have to be careful,because The Normal Note 2's software can brick my device and I have to use a Demo Software.Does anyone know a Demo Version of Android 4.1.2 for Note 2?I'm new on XDA so I don't even know a lot of things...
Click to expand...
Click to collapse
I upgrade note2 demo just yesterday using odin and full firmware uprgade without problem. I have no demo sw and ofcourse no gsm signal.
OTG USB host cable problem
I have two question about Note 2 N7100 demo live.
1. OTG USB host adapter cable lost connection on phone. It sees the phone OTG cable but constantly connects and disconnects immediately and so constantly repeated in a circle. This OTG cable I tried on another Note 2 (not demo) and works great.
Does anyone know how to solve this problem with "conecting-reconecting" OTG host cable.
2. If I make a Skype video call, the person on the other end can not hear me. However, I can hear him well. The problem goes away if I plug my headphones in. Strangely no problem during an audio only call. There are similar issues with Google talk video chat. Did you notice this problem on your unit.
This demo note 2 have stock firmware 4.1.2 and all function (except phone calls and sending SMS) work well.If it is important, I have reclaim the memory from 5 to 16GB with the original pit file.
Ucigasul de Plictiseala said:
Hi everyone!I have a Galaxy Note 2 Live Demo Unit and it has Android 4.1.1.I tried to update it to 4.1.2 with Kies but it said that there isn't any software update for my device.I went at a GSM service,and they said that I have to be careful,because The Normal Note 2's software can brick my device and I have to use a Demo Software.Does anyone know a Demo Version of Android 4.1.2 for Note 2?I'm new on XDA so I don't even know a lot of things...
Click to expand...
Click to collapse
if you flash a custom rom for a real note 2 it will work, i did it to my demo unit. does anyone know how to make it into a real phone would i have to write an imei to it, because it doesnt have one. it also says baseband unknown
Hi Guys
I got this SM T210 (wifi only) tab and I'm wondering if this really has a TV-out feature via MHL to HDMI.
It really is not clear for me because some sites says it has but other says it doesn't.
I was wondering if anyone here has the same tab as mine and has gotten this feature working for them.
If it work for you can you please also indicate what model of the cable you are using.
Thanks
The official specs on samsung's site make no mention of HDMI.
Redeemed04231 said:
The official specs on samsung's site make no mention of HDMI.
Click to expand...
Click to collapse
Yep, that is why it is really confusing. If you look here at the MHL to HDMI cable here
http://www.samsung.com/us/mobile/galaxy-tab-accessories/ET-H10FAUWEGUJ-compatible
it clearly says that it is compatible with Galaxy tab 3 7" (Gold brown color w same specs as the white).
and also here on this link
http://www.abt.com/product/71046/Samsung-ETH10FAUWEGUJ.html
if you look at the docs of that cable. it states that this is for all 2013 Galaxy tab 3 devices including the 7" version.
Hopefully somebody has gotten this to work because I really need this feature on my tab.
up
About MHL (TV Out) capabilities:
http://www.samsungmobilepress.com/2013/06/03/Samsung-Introduces-New-GALAXY-Tab-3-Series-1
suggest you buy a MHL to HDMI adapter to test it. If it works, that will be great. if not, you can return the MHL to HDMI to the vendor.
grailwt19i said:
Hi Guys
I got this SM T210 (wifi only) tab and I'm wondering if this really has a TV-out feature via MHL to HDMI.
It really is not clear for me because some sites says it has but other says it doesn't.
I was wondering if anyone here has the same tab as mine and has gotten this feature working for them.
If it work for you can you please also indicate what model of the cable you are using.
Thanks
Click to expand...
Click to collapse
grailwt19i said:
Hi Guys
I got this SM T210 (wifi only) tab and I'm wondering if this really has a TV-out feature via MHL to HDMI.
It really is not clear for me because some sites says it has but other says it doesn't.
I was wondering if anyone here has the same tab as mine and has gotten this feature working for them.
If it work for you can you please also indicate what model of the cable you are using.
Thanks
Click to expand...
Click to collapse
Hi, I am sorry to tell you the bad news. I asked Samsung online service about your question that whether the micro USB port of tab 3 7.0 supports MHL function via live chat of Samsung.com. They told me that only tab 3 8.0 and tab 3 10.1 features a micro USB port with MHL/HDMI functionality like Samsung Galaxy S4，S3 and Note 2.
aaa111sss said:
Hi, I am sorry to tell you the bad news. I asked Samsung online service about your question that whether the micro USB port of tab 3 7.0 supports MHL function via live chat of Samsung.com. They told me that only tab 3 8.0 and tab 3 10.1 features a micro USB port with MHL/HDMI functionality like Samsung Galaxy S4，S3 and Note 2.
Click to expand...
Click to collapse
Aw... Now I don't know what to do with this tab anymore. I really need the MHL tv out capabilities so when I travel I can make this as my Portable TV box.
Anyways. Thanks for all the help. I guess I'll just sell this and buy another tab.
what if you root it or something? would that work?
you can get this to kinda work by putting a kit Kat rom on it. all kit kat roms have miracast. it's not exactly mhl (wireless instead of wired) but it serves the same function
Sent from my SM-T217S using XDA Free mobile app
reinaldistic said:
you can get this to kinda work by putting a kit Kat rom on it. all kit kat roms have miracast. it's not exactly mhl (wireless instead of wired) but it serves the same function
Sent from my SM-T217S using XDA Free mobile app
Click to expand...
Click to collapse
but won't this be updating to kit kat soon anyway? Could we just wait?
I guys, maybe I'll buy LG Optimus G for xmas. The only lack of this phone, imho, is the missing SD card slot. It won't be a lack if this phone supported OTG, but, as lot of us know, microusb on this phone doesn't provide 5V output, so it's impossibile to connect other usb devices to OG.
5V output is not the only requirement to make USB OTG work, but 5V usb power can be easily supplied with a Y cable with one end connected to a power source (computer or phone charger itself or external emergency batteries). OTG needs also compatibile soc (snapdragon s4 pro is compatible for sure), kernel support (it should be enough to connect devices, such as usb gamepads) and software support (for example to read what's on a usb stick). Software support is easier than 5V, lot of free and well know softwares can be found on googleplay. So only kernel support is the last enemy. I'm not able to compile kernels or other stuff like this, but, as I saw for other devices (even mid-range like some samsungs with novathor chipset) or for OG's almost-twin Nexus 4 which has the same situation of OG, kernel support can be easily integrated by people with some skills in android programming.... So, is there anyone who can try to add kernel support?
titomax82 said:
I guys, maybe I'll buy LG Optimus G for xmas. The only lack of this phone, imho, is the missing SD card slot. It won't be a lack if this phone supported OTG, but, as lot of us know, microusb on this phone doesn't provide 5V output, so it's impossibile to connect other usb devices to OG.
5V output is not the only requirement to make USB OTG work, but 5V usb power can be easily supplied with a Y cable with one end connected to a power source (computer or phone charger itself or external emergency batteries). OTG needs also compatibile soc (snapdragon s4 pro is compatible for sure), kernel support (it should be enough to connect devices, such as usb gamepads) and software support (for example to read what's on a usb stick). Software support is easier than 5V, lot of free and well know softwares can be found on googleplay. So only kernel support is the last enemy. I'm not able to compile kernels or other stuff like this, but, as I saw for other devices (even mid-range like some samsungs with novathor chipset) or for OG's almost-twin Nexus 4 which has the same situation of OG, kernel support can be easily integrated by people with some skills in android programming.... So, is there anyone who can try to add kernel support?
Click to expand...
Click to collapse
We have kernel that supports nexus 4 OTG hack... Find it on the other forum for OG... Havent tested it though.. And o u must be on 4.3 to use kernel
Sent from my LG Optimus G using Tapatalk
davevinci said:
We have kernel that supports nexus 4 OTG hack... Find it on the other forum for OG... Havent tested it though.. And o u must be on 4.3 to use kernel
Sent from my LG Optimus G using Tapatalk
Click to expand...
Click to collapse
Thanks... but where precisely?
Did u find that.
titomax82 said:
Thanks... but where precisely?
Click to expand...
Click to collapse
Did u find that kernel that supports nexus 4 OTG hack, will it work if i flash that kernel on my LG optimus G ?
I've a purchased USB Y cable too, just waiting for the kernel....
---------- Post added at 09:03 PM ---------- Previous post was at 09:01 PM ----------
davevinci said:
We have kernel that supports nexus 4 OTG hack... Find it on the other forum for OG... Havent tested it though.. And o u must be on 4.3 to use kernel
Sent from my LG Optimus G using Tapatalk
Click to expand...
Click to collapse
titomax82 said:
Thanks... but where precisely?
Click to expand...
Click to collapse
Did u find that kernel that supports nexus 4 OTG hack, will it work if i flash that kernel on my LG optimus G ?
I've a purchased USB Y cable too, just waiting for the kernel....
Gvirendra201 said:
Did u find that kernel that supports nexus 4 OTG hack, will it work if i flash that kernel on my LG optimus G ?
I've a purchased USB Y cable too, just waiting for the kernel....
---------- Post added at 09:03 PM ---------- Previous post was at 09:01 PM ----------
Did u find that kernel that supports nexus 4 OTG hack, will it work if i flash that kernel on my LG optimus G ?
I've a purchased USB Y cable too, just waiting for the kernel....
Click to expand...
Click to collapse
No, I haven't found it and I have still have no LGOG, maybe for xmas.
Hoping someone else can help
So, still no kernel?
Yaa. I got that...
akahroba said:
So, still no kernel?
Click to expand...
Click to collapse
I got that working 3-4 months ago.
There's a kernel from Houstonn's AOSP 4.4 kiktkat ROM.
Try that, I used OTG for like 1 month And then moved to stock again.
Gvirendra201 said:
I got that working 3-4 months ago.
There's a kernel from Houstonn's AOSP 4.4 kiktkat ROM.
Try that, I used OTG for like 1 month And then moved to stock again.
Click to expand...
Click to collapse
thanks, you mean this one? http://forum.xda-developers.com/showthread.php?t=2522290
Yes
akahroba said:
thanks, you mean this one? http://forum.xda-developers.com/showthread.php?t=2522290
Click to expand...
Click to collapse
Exactly, try that ROM along with faux clock.
Gvirendra201 said:
Exactly, try that ROM along with faux clock.
Click to expand...
Click to collapse
Faux clock? I couldn't find it for E975
akahroba said:
Faux clock? I couldn't find it for E975
Click to expand...
Click to collapse
I know that, It's hard to find. But checkout carefully !! You'll get that.
Is there any possible solution to turn the wifi in tab 3 7.0 to monitor mode? And what is the wifi chipset of tab 3 7.0?
hey
anvil_10 said:
Is there any possible solution to turn the wifi in tab 3 7.0 to monitor mode? And what is the wifi chipset of tab 3 7.0?
Click to expand...
Click to collapse
anvil,
for the sm-t210[r] i don't think so. if i understand it correctly you need a specific dongle with a specific
holy grail kind of chipset, AND you need a device with otg capability. binary-droid thought he had that solved
but as i haven't read anything else about it, i would say the answer is a resounding NO.
m
moonbutt74 said:
anvil,
for the sm-t210[r] i don't think so. if i understand it correctly you need a specific dongle with a specific
holy grail kind of chipset, AND you need a device with otg capability. binary-droid thought he had that solved
but as i haven't read anything else about it, i would say the answer is a resounding NO.
m
Click to expand...
Click to collapse
I think tab 3 7.0 with rom seal v3 BETA ,by bensonshu, the otg capability work,,, for i see in the features of seal v3 beta com.hardware.usb.host is set to true,,, sorry i dont have a screen shot for i currently use seal rom v2.
more on otg
anvil_10 said:
I think tab 3 7.0 with rom seal v3 BETA ,by bensonshu, the otg capability work,,, for i see in the features of seal v3 beta com.hardware.usb.host is set to true,,, sorry i dont have a screen shot for i currently use seal rom v2.
Click to expand...
Click to collapse
anvil,
hey this is what binary-droid had to say on the kernel drivers and the internal hardware, post 2
http://forum.xda-developers.com/showthread.php?t=2784752
which is a neat bit of info, as soon as i can get my tab 7 back from mom, [she likes her puzzle games]
i'm going to look into trying what binary-droid was working on myself.
m
moonbutt74 said:
anvil,
hey this is what binary-droid had to say on the kernel drivers and the internal hardware, post 2
http://forum.xda-developers.com/showthread.php?t=2784752
which is a neat bit of info, as soon as i can get my tab 7 back from mom, [she likes her puzzle games]
i'm going to look into trying what binary-droid was working on myself.
m
Click to expand...
Click to collapse
so does it mean that the problem on bringing otg support in tab 3 lies on the kernel and not on the hardware itself?
I have a Samsung Galaxy Tab 3 that I want to use ethernet, mouse and keyboard with to do remote desktop work. Is there anyway I can do this? I see that there's a Samsung USB LAN hub for the Note Pro/Tab Pro line of tablets but I'm wondering if this will work with the Tab 3.
If not i'm wondering if a hub can be connected to the tablet that would then allow the connecting of the usb mouse, keyboard and a usb ethernet adapter. These are the two products I'm currently looking at but im not sure if they are compatible.
Samsung Original LAN USB HUB Adapter (ET-UP900) for Galaxy Note Pro /Tab Pro
[3 Ports USB 3.0 + 1 Adapter ethernet] Unitek
I can't post links as yet. They can be easily found with a query in Amazon.
joeldean said:
I have a Samsung Galaxy Tab 3 that I want to use ethernet, mouse and keyboard with to do remote desktop work. Is there anyway I can do this? I see that there's a Samsung USB LAN hub for the Note Pro/Tab Pro line of tablets but I'm wondering if this will work with the Tab 3.
If not i'm wondering if a hub can be connected to the tablet that would then allow the connecting of the usb mouse, keyboard and a usb ethernet adapter. These are the two products I'm currently looking at but im not sure if they are compatible.
Samsung Original LAN USB HUB Adapter (ET-UP900) for Galaxy Note Pro /Tab Pro
[3 Ports USB 3.0 + 1 Adapter ethernet] Unitek
I can't post links as yet. They can be easily found with a query in Amazon.
Click to expand...
Click to collapse
Greetings joeldean, but before i can answer your questions, i will have to know which model that you own. We got tab 3 7.0 8.0 10.1 and then we got p5210 p5220 p5200 t2110 t2150 and so on...
Jacker31 said:
Greetings joeldean, but before i can answer your questions, i will have to know which model that you own. We got tab 3 7.0 8.0 10.1 and then we got p5210 p5220 p5200 t2110 t2150 and so on...
Click to expand...
Click to collapse
I have Samsung Galaxy Tab 3 10.1" P5200.
joeldean said:
I have Samsung Galaxy Tab 3 10.1" P5200.
Click to expand...
Click to collapse
I am sure keyboard and mouse will work on otg cable as long as they got enough power (I have tried it) and for WLAN or Ethernet cables you will need to modded kernel to do it.
More info here http://forum.xda-developers.com/showthread.php?t=2705323 (its for p5210 though)
Jacker31 said:
Greetings joeldean, but before i can answer your questions, i will have to know which model that you own. We got tab 3 7.0 8.0 10.1 and then we got p5210 p5220 p5200 t2110 t2150 and so on...
Click to expand...
Click to collapse
Jacker31 said:
I am sure keyboard and mouse will work on otg cable as long as they got enough power (I have tried it) and for WLAN or Ethernet cables you will need to modded kernel to do it.
More info here http://forum.xda-developers.com/showthread.php?t=2705323 (its for p5210 though)
Click to expand...
Click to collapse
thanks Jack. Im using my older account that I just got access to. It allows me to post link so yeah Im the same as joeldean.I havent gotten a response from that person as yet. I was wondering if you know anyone willing to help me modify a Tab 3 kernel to add ASIX drivers. Based on my research the ASIX ethernet based adapters seem to be most compatible. I would even be willing to pay to get this done.
jdean2k6 said:
thanks Jack. Im using my older account that I just got access to. It allows me to post link so yeah Im the same as joeldean.I havent gotten a response from that person as yet. I was wondering if you know anyone willing to help me modify a Tab 3 kernel to add ASIX drivers. Based on my research the ASIX ethernet based adapters seem to be most compatible. I would even be willing to pay to get this done.
Click to expand...
Click to collapse
Well, if you like to join us here http://forum.xda-developers.com/gal.../dis-android-kernel-modding-gt-p52xx-t3052321 we have a group of developers are discussing about roms and kernel development here. I am sure they are willing to help you out there.