Since we don't have rw access to /system is it possible to make an update.zip that would simply run a script that is on the sdcard?
Ie giving us write access without a PC.
If not. Could it be possible to add this function to a custom recovery?
Ie. a new menu. Run custom script.
Dear all,
I have problem to manipulate and access to internal storage of my Desire (/system/app and /system/lib/). Even though Root Explorer/ Estrong Explorer/AndExplorer can see the system file but I cannot move/edit/copy/paste files to those above mentioned folders. And the Droid explorer on my PC can also see all files on Desire but not make me copy files into system folder. I'm using root Desire phone with the LeeDroid 1.3a ROM. Newest super permission users 2.2 is also included in this room and the Read/Write permissions have been set for any explorer. Is there any way for me to make PC recognize internal storage as drive (like external SD card) or is there any solution to copy files into system folder on internal storage successfully? Because I would like to install Java for my Desire but ADB and some method require to copy file into internal storage. Pls advise me about installing Java to run MIDlet Java Games and show the way to show the problem of internal storage recognition and root permission. Thanks for all. Hope to hear good news from all of you !!!
You cannot access write in /system whilst the phone is booted. You can only do this via ADB when in recovery.
Regards,
Dave
Well i take it you are trying while the android system is booted.
That won't work, as the phone has nand protection. Instead you should boot into a custom recovery and use "adb push" commands to copy files over.
Hope you can figure it out otherwise ask
edit: too late
mortenmhp said:
Well i take it you are trying while the android system is booted.
That won't work, as the phone has nand protection. Instead you should boot into a custom recovery and use "adb push" commands to copy files over.
Hope you can figure it out otherwise ask
edit: too late
Click to expand...
Click to collapse
Fristly, thanks for all of your advice. But in the recovery mode, PC does not recognize USB toogle connection. So how to activate the ADB sell to make the command input? Pls advise me for more detail.
In fact to me, ADB can recognize my HTC desire in window XP but when my Desire has already booted into main screen. When in recovery mode, ADB cannot detect my HTC desire (adb devices). Pls tell me install ADB driver so that ADB in winXP can detect my Desire even in recovery mode. Thanks.
hi im using LeeDrOiD_V2.1a_A2SD , is there any way to force apps to be run from the system memory instead of the sdcard, as far as i can tell it automatically goes to the sdcard?
would prefer to use the system memory for security software such as wavesecure?
thanks
John
Yes to run it from the system partition so it can not be removed the regular way, you just have to move the apk file from /sd-ext/app/ to /system/app/
This can be done using adb commands when in recovery or by applying the s-off hack and use an app like root explorer.
thanks
the apk file was in the folder /system/sd/app
and root explorer let me enable r/w access in it, without enabling s-off
i'm hoping i did it right
:-0
thanks again
John
Well you might be able to do it this way without s-off but it is not actually on the system partition. It depends on what Rom you are using.
But are you able to uninstall it using the settings menu?
it still gives me the option to uninstall yes, but at this point i just wanted to get it running off the phones memory, rather than off the sd card
thanks
John
ok it turns out root explorer didn't copy them over, so i copied them over with adb commands , and wavesecure doesn't show up as uninstallable
ta
John
jcat00uk said:
ok it turns out root explorer didn't copy them over, so i copied them over with adb commands , and wavesecure doesn't show up as uninstallable
ta
John
Click to expand...
Click to collapse
yeah, most of the programs out there (like root explorer) won't throw out an error if they can'y mount it as R/W... because HTC was clever enough to hide that it can't be mounted RW without S-off
Most ROMs bar CM have aps2sd enabled automatically. I seem to be having trouble with this as Titanium Backup is crashing while installing to sd, but not to the internal memory.
Is it possible to disable aps2sd until after booting and installing the essential apps from TB?
So there isn't anything I can flash to disable and then reflash to enable?
Or a folder to delete?
Or script to edit?
Probably it is a script in:
/system/etc/init.d/
Can't tell which one exactly, as it differs per ROM (they all have their own implementation).
Maybe you can state which ROM you are using?
To temperory disable it, is by removing it in the ROM.zip I guess and then resign it by tools found here on xda (androsign). Then you can adb push it in later if wanted.
eh, how bout removing ur sdcard and only insert it only after booting?
edit: ah i read wrongly
Could be something aye. init is only executed @ boot I think.
Of course, remove the sd card ... always the simple answer that gets ignored :-D
It is a script in /system/etc/init.d/10apps2sd or 4apps2sd or something how ends with apps2sd in the file name,remove it with adb and push it back when you want to use it again.
Since it is governed by a text string in init.rc in the kernel also but you need not worry if you move away the script file in /system/etc/init.d
No joy on this, I remove the 10apps2sd script and it crashes the system when installing anything :-(
maybe there is a way to unpartition the sdcard?
I tried every way, but I can not use the swap partition on my WFS.
I installed the latest version of the ROM and the Kernel, but I can't make it work.
Does anyone know what should I do to run the "Swap Partition" on my phone?
Go through this.
http://wiki.cyanogenmod.com/wiki/Swap_and_Compcache
The cyanogenmod team feels that swap doesn't serve it's purpose on an Android device. To quote them
"This question is hotly debated, but you almost definitely do not need swap or compcache. The only exception to this may be if the device is a first generation device (i.e. HTC Dream or HTC Magic). If you think swap or compcache may make the device faster, feel free to follow the directions below."
Click to expand...
Click to collapse
And the WFS is not a first generation device
If you still want to go ahead with it, that link provides a how-to.
But the problem is that with this ROM my phone does not recognize the swap partition. I would like to post on its own thread, but I can not because I am a new user.
DanHidalgo said:
I tried every way, but I can not use the swap partition on my WFS.
I installed the latest version of the ROM and the Kernel, but I can't make it work.
Does anyone know what should I do to run the "Swap Partition" on my phone?
Click to expand...
Click to collapse
You have to create a mount script and copy it to /system/etc/init.d and give it the same permissions all the other files in init.d
Attached is the code to use if you have swap as the third partition on your SD card. Remove the .txt extension and place it in /system/etc/init.d and give it the appropriate permissions then reboot
Use the command "free" in a terminal session to verify swap is active and working.
It should be pretty straightforward to modify it to be the second if you aren't using an SD Ext partition for programs.
The code is:
Code:
#!/system/bin/sh
#Checks for a swap partition on mount 3 of the SD card and use it for swap partition.
if [ -b /dev/block/mmcblk0p3 ];
then
#Uncomment the line below to adjust swappiness. Default is 60 I believe
# echo 20 > /proc/sys/vm/swappiness;
swapon /dev/block/mmcblk0p3;
fi;
Change the line:
if [ -b /dev/block/mmcblk0p3 ];
to
if [ -b /dev/block/mmcblk0p2 ];
If you only have your FAT32 Primary and your Swap partition and no SDExt
I will try it this evening. Some people told me that oboe is that I created the Swap Partition with the recovery and I have to create it with the PC.
If I get it working I'll post my results. If not you will see me here again.
Enviado desde mi HTC Wildfire S usando Tapatalk
d33ps1x said:
You have to create a mount script and copy it to /system/etc/init.d and give it the same permissions all the other files in init.d
Attached is the code to use if you have swap as the third partition on your SD card. Remove the .txt extension and place it in /system/etc/init.d and give it the appropriate permissions then reboot
Use the command "free" in a terminal session to verify swap is active and working.
It should be pretty straightforward to modify it to be the second if you aren't using an SD Ext partition for programs.
The code is:
Code:
#!/system/bin/sh
#Checks for a swap partition on mount 3 of the SD card and use it for swap partition.
if [ -b /dev/block/mmcblk0p3 ];
then
#Uncomment the line below to adjust swappiness. Default is 60 I believe
# echo 20 > /proc/sys/vm/swappiness;
swapon /dev/block/mmcblk0p3;
fi;
Change the line:
if [ -b /dev/block/mmcblk0p3 ];
to
if [ -b /dev/block/mmcblk0p2 ];
If you only have your FAT32 Primary and your Swap partition and no SDExt
Click to expand...
Click to collapse
When I try to move the script to the specific file I get: failed to copy, or failed to move. How could I copy or move the script in /system/etc/init.d and give all permissions? I am using ES File Explorer and ASTRO. Should I move the zipped file or only the script? I couldn't move none of them
Portugah said:
When I try to move the script to the specific file I get: failed to copy, or failed to move. How could I copy or move the script in /system/etc/init.d and give all permissions? I am using ES File Explorer and ASTRO. Should I move the zipped file or only the script? I couldn't move none of them
Click to expand...
Click to collapse
You have to mount system partition as RW to be able to manipulate with files there, big white button "Mounr R/W" in the upper part of the Root explorer app while you are in /system/etc/init.d folder. Then you put there swap.txt file that d33ps1x provided up in the post, rename it just to swap and reboot phone.
I did that with almost every version of cm7 from the begining (in which kernel allowed that) and every time it worked, tnx to d33ps1x
kobredabre said:
You have to mount system partition as RW to be able to manipulate with files there, big white button "Mounr R/W" in the upper part of the Root explorer app while you are in /system/etc/init.d folder. Then you put there swap.txt file that d33ps1x provided up in the post, rename it just to swap and reboot phone.
I did that with almost every version of cm7 from the begining (in which kernel allowed that) and every time it worked, tnx to d33ps1x
Click to expand...
Click to collapse
Root explorer is a paid app. Is there any other app I could do that?
Portugah said:
Root explorer is a paid app. Is there any other app I could do that?
Click to expand...
Click to collapse
Total commander for android can do same:
http://forum.xda-developers.com/showthread.php?t=1619734
and it's free
kobredabre said:
Total commander for android can do same:
http://forum.xda-developers.com/showthread.php?t=1619734
and it's free
Click to expand...
Click to collapse
Once installed the app, how do I grant permissions to the file? the link shows images from the older version.
Portugah said:
Once installed the app, how do I grant permissions to the file? the link shows images from the older version.
Click to expand...
Click to collapse
Push and hold the file, choose properties and then hit first button right from the file name and current permissions to expand the menu
kobredabre said:
Push and hold the file, choose properties and then hit first button right from the file name and current permissions to expand the menu
Click to expand...
Click to collapse
I moved the file to the specific folder and I restarted my phone. Opening a2sd the swap button was turned off. I opened the terminal and I typed free, the results are 0-0-0. I didn't work.
Portugah said:
Once installed the app, how do I grant permissions to the file? the link shows images from the older version.
Click to expand...
Click to collapse
I granted permissions to the file using Total Commander app. Thank you. But it looks like it is not working yet.
Portugah said:
I granted permissions to the file using Total Commander app. Thank you. But it looks like it is not working yet.
Click to expand...
Click to collapse
Then the problem can be with kernel on ROM you are using, basic thing is that kernel needs to be abble to support swap for swap to even work... Can't help you much there since you are probably on marvelc version according to you'r country flag, i'm on diferent version. Some1 with same model as yours could help you tough
Is there any way to install another ROM that support swap? which ROM should I use? is there any tutorial?
Portugah said:
Is there any way to install another ROM that support swap? which ROM should I use? is there any tutorial?
Click to expand...
Click to collapse
The [2nd] above post is correct. Swap support is enabled in some custom kernels. If you're looking for another ROM, you're going to primarily ask about the kernel included with that ROM. Stock kernels do NOT support swap. You can enable swap [if you have a supporting kernel] via A2SDGUI or terminal... read up and familiarize yourself with linux swap.. since Android is a branch of Linux; same principles apply
Rob
Sent from my HTC_A510c using Tapatalk 2
This says it's possible to enable swap and compcache on CM7.2, but the howto wiki link is dead
To answer you question directly, by default the swap and Compcache schemes are disabled, but if you still feel the need to use them, above link provides you with a how-to.
So, yes, the CyanogenMod 7.2 supports swap and its usage needs to be activated.
Click to expand...
Click to collapse
Any idea how to do this?
For me the same question. I'm investigating since 1 week, tried scripts etc. no chance
Nexus One,
4EXT recovery (needed for correct sd-ext formatting)
CM 7.2
swap partition is there but not used.
What could i do to enable the swap partition?
Regards,
Marc
Hello,
I have the stable release cyanogenmod 7.2.0.
Swap is not working and gives following message:
swapon: /dev/block/mmcblk0p3: Function not implement
I found some notes saying that the problem is the kernel not supporting
swap. Which kernel can I use with cyanogenmod 7.2.0 with swap support?.
Thanks for your help.