Hallo together,
I cant install PA.
I always get stick at the moving circles. What do I do wrong?
I have a Moto G (screenshots).
I tried several times with these:
pa_falcon-4.4-RC1-20140610
pa_gapps-modular-mini-4.4.3-20140608-signed
I do it like this with philz_touch_6.26.6-falcon-Recovery:
Wipe System, Data, Cache, and Dalvik Cache -> Flash ROM -> Flash GAPPS
What do i do wrong?
Greetz
You should ask in your device forum because it could be a problem with the specific build for your device. We don't officially support anything that isn't a Nexus so you are running a legacy build.
#stayparanoid
Try cleaning the cache and dalvik after installing each zip. This usually works on my friends phones when they get stuck on the boot screen when flashing a new ROM.
Hope this helps
Related
Hi I've tried to change my Build. I'm currently using Android Revolution HD. I've got the kernel the program came with - android-build. I have tried changing it over to a whole of builds. AOKP, Gummy
It never successfully launches any of them.
Every time I wipe data, cache and I wipe Dalvik too.
I don't know what to do...
Is there any one who is on Rogers that can do this?
Thanks guys
Biomera said:
Hi I've tried to change my Build. I'm currently using Android Revolution HD. I've got the kernel the program came with - android-build. I have tried changing it over to a whole of builds. AOKP, Gummy
It never successfully launches any of them.
Every time I wipe data, cache and I wipe Dalvik too.
I don't know what to do...
Is there any one who is on Rogers that can do this?
Thanks guys
Click to expand...
Click to collapse
Don't really make sense??? Try to also format system in recovery ( it won't touch ur personal stuff ) then do all the other wipes then try flash another Rom if that don't work I.got nothing, if u can't figure out there's always fastboot stock Google .img
Can you provide a step-by-step instruction on how you tried to update your Galaxy Nexus ? I'm not on Rogers (I'm on TELUS), but still, maybe we can help you and see if you are following the right path !
You're not doing something right if you can't get another ROM installed.
Do this.
Make sure ROM and Gapps package for that ROM is on your SD card
Reboot into recovery
Wipe data
Wipe cache
Go to Advanced, Wipe dalvik
Go to Mounts and Storage, format system, and cache
INSTALL ROM based on 4.03
Install Gapps
Reboot and Enjoy
Samsuck said:
You're not doing something right if you can't get another ROM installed.
Do this.
Make sure ROM and Gapps package for that ROM is on your SD card
Reboot into recovery
Wipe data
Wipe cache
Go to Advanced, Wipe dalvik
Go to Mounts and Storage, format system, and cache
INSTALL ROM based on 4.03
Install Gapps
Reboot and Enjoy
Click to expand...
Click to collapse
I would back your phone up before doing this. Formatting your system deletes the operating system.
theherodrownd said:
I would back your phone up before doing this. Formatting your system deletes the operating system.
Click to expand...
Click to collapse
Correct. Listen to him and PLEASE make a back-up. I forgot to mention that.
I want to update my Unofficial CM10 +3.x Kernel to the latest update from Hashcode.
UNOFFICIAL CM10 + 3.x Kernel for Kindle Fire [09/16 CHARGING+]
When you do an update like this, do you wipe everything like I did when I first flashed the ROM? I mean, when I installed, I wiped system, factory reset, cache and dalvik cache. Then I flashed the ROM and then I flashed gapps.
So now I just want to update the OS, what do I need to wipe? And will I need to flash gapps again?
CAn't ask this in the development thread 'cause my n00b hat it still too shiney.
Thanks!
A question like this doesn't belong in the development thread because it isn't development related.
If you're going from one ROM to a different one, you need to wipe System and Factory Reset (data and cache).
If the ROM is simply an update of an existing ROM, generally all you need to wipe is data and cache. There are always exceptions to this so it's always a good idea to make a backup in case things turn sour.
After installation of the ROM you have the option to wipe cache and dalvik. It isn't required but not wiping them has been known to cause some bugginess.
soupmagnet said:
A question like this doesn't belong in the development thread because it isn't development related.
If you're going from one ROM to a different one, you need to wipe System and Factory Reset (data and cache).
If the ROM is simply an update of an existing ROM, generally all you need to wipe is data and cache. There are always exceptions to this so it's always a good idea to make a backup in case things turn sour.
After installation of the ROM you have the option to wipe cache and dalvik. It isn't required but not wiping them has been known to cause some bugginess.
Click to expand...
Click to collapse
Thank you once again, soupmagnet. Yeah this is just an update to my current ROM. So .... I won't need to flash gapps again?
I'm slowly figuring this stuff out. hehehe... When I was 30 I picked this stuff up quick. Turning 60 on Thursday and stuff tends to need a little more pondering lately. hahaha
Anywho.... thanks
Oh, yeah. You need to flash Gapps if you wipe system.
soupmagnet said:
Oh, yeah. You need to flash Gapps if you wipe system.
Click to expand...
Click to collapse
OK, see, now you're messin' with the old man here... hehehe
On one hand I'm hearing if I am only updating my current ROM, I just wipe data and cache.
Then you tell me I have to flash gapps if I wipe System.
But prior you said I only need to wipe system if I'm going from one ROM to a different ROM.
So.... I'm just updating my current ROM. I wipe data and cache, flash the updated ROM, wipe dalvik.... done...
no flash gapps, right?
I need to look at TWRP again to see exactly how it presents the choices. Don't be hatin' on the old guy for bein' dumb now.
OK, booted to TWRP. When I select Wipe my choices are : Cache, Dalvik Cache, Factory Reset, System and then External Storage. So... in your first answer to me when you said to go to a different ROM I should wipe "System and Factory Reset (data and cache)" it appears you are telling me that "System and Factory Reset" is another way of referring to "data and cache". Is that correct?
Gapps go in the /system/app folder so if you wipe the system partition, Gapps will go along with it.
soupmagnet said:
Gapps go in the /system/app folder so if you wipe the system partition, Gapps will go along with it.
Click to expand...
Click to collapse
GAaaahhh..... I just wiped System and watched as it processed /system
and then I wiped Factory Reset and watched as it processed /data and /cache
So I guess that answers my confusion.
Hey guys,
I always have to pull my battery out multiple times on reboots, or after flashing a rom.
When I change roms, I do a fact. reset and wipe cache/dalvik, on updates of same rom I only do a wipe of cache/dalvik. I tried fixing permissions.
How is this caused ? It eventually boot up every time, just very annoying.
Does wiping system help ? I've read that most rom dev's include it anyway in flashing rom.
Phone: Samsung Galaxy Nexus
Rom: AOSP Paranoid Android 2.99 beta 5
Recovery: TWRP 2.3.2.1
Thnx for your help!
Firewalker1980 said:
Hey guys,
I always have to pull my battery out multiple times on reboots, or after flashing a rom.
When I change roms, I do a fact. reset and wipe cache/dalvik, on updates of same rom I only do a wipe of cache/dalvik. I tried fixing permissions.
How is this caused ? It eventually boot up every time, just very annoying.
Does wiping system help ? I've read that most rom dev's include it anyway in flashing rom.
Phone: Samsung Galaxy Nexus
Rom: AOSP Paranoid Android 2.99 beta 5
Recovery: TWRP 2.3.2.1
Thnx for your help!
Click to expand...
Click to collapse
I haven't encountered this but I sometimes get bootloop when I flash Gapps without wiping cache and dalvik. Whenever I flash a new ROM, I do factory reset, wipe system, cache, and dalvik. So you may try wiping all of them and make a fresh install of the ROM then see if this problem keeps affecting you. Just make a nandroid backup in case this does not help so you restore your whole data easily
ahmadallica said:
I haven't encountered this but I sometimes get bootloop when I flash Gapps without wiping cache and dalvik. Whenever I flash a new ROM, I do factory reset, wipe system, cache, and dalvik. So you may try wiping all of them and make a fresh install of the ROM then see if this problem keeps affecting you. Just make a nandroid backup in case this does not help so you restore your whole data easily
Click to expand...
Click to collapse
Hey thx for your suggestions!
I always flash a "new" rom that way though. But an update of the same rom, I "dirty" flash, which should be fine according to everyone.
No matter what Rom/Kernel I use, I still frequently have to pull the battery out.
It's never from locking up within Android. It just freezes/loops on the Google bootlogo.
I once wiped everything, even the storage space, and it helped for a little while, but did not make it go away for good.
Could it be related to certain apps ? Maybe PGM or Seeder or smth ?
All input welcome
---------------------------------------------------------------
Phone: Samsung Galaxy Nexus Maguro
Rom: AOSPA 2.99 latest
Kernel: AK Purity v20
Recovery: TWRP 2.3.3.0
Ok experts.
First of all, thank you for reading this post. This shows me you read the subject line and in your heart, you are willing to help others ( in this case, me ). And for that i thank you.
So...i have flashed roms before on samsung and htc devices. Why is it so hard on LG?
I downloaded a rom and gapps, opened twrp and did wipe cache, dalvik cache, system but not the data because if i do i loose everything including the rom and gapps i downloaded. Then i fashed rom wiped cache and dalvik cach, flashed gapps wipe cache and dalvik cache then fix permission then reboot and it stays stuck on bootloading screen.
Please point out to me what im doing wrong or what am i missing. I have tried flashing this rom 10 times.
Again thanks.
Sent from my Sprint LGOG
miguelberrios said:
Ok experts.
First of all, thank you for reading this post. This shows me you read the subject line and in your heart, you are willing to help others ( in this case, me ). And for that i thank you.
So...i have flashed roms before on samsung and htc devices. Why is it so hard on LG?
I downloaded a rom and gapps, opened twrp and did wipe cache, dalvik cache, system but not the data because if i do i loose everything including the rom and gapps i downloaded. Then i fashed rom wiped cache and dalvik cach, flashed gapps wipe cache and dalvik cache then fix permission then reboot and it stays stuck on bootloading screen.
Please point out to me what im doing wrong or what am i missing. I have tried flashing this rom 10 times.
Again thanks.
Sent from my Sprint LGOG
Click to expand...
Click to collapse
It looks like you're doing it right, but there's a couple things that might be missing.
You should be wiping data also. So in TWRP 2.5.0.0, select the Wipe tab, Factory Reset, then Advanced tab, and select all 4. /system, /data, /cache, /dalvik. This way you have a clean slate. DO NOT HIT THE FORMAT DATA!!! It erases /data/media.
If you're flashing CM for the first time, you need to either use teeny bins, or (I think this still works) flash the CM 10.1 ROM by Shelnutt2. This updates your partitions needed to run CM based ROM's.
Wow. It worked. I failed to notice that reseting the phone was not formating the data...so it worked.
Big thank you.
Issue solved.
Sent from my Sprint LGOG
Hi guys, don't know if this is going on the right forum or whatever but I have a problem!
So last week I rooted and flashed my phone to 4.4.2 Google Play Edition (I'm a noob to all of this) may I add that I have a GT-i9505 model with an unlocked bootloader etc (as I have an international s4)
Phone was working fine except for a few bugs such as camera application would stop working.
So I decided to have to have a look around at another ROM to change and flash it and I found the 4.4.2 Liquidsmooth ROM (which looks pretty good and seems to be everything I need) so I started to reflash it all again (as I did before) however I have 35% battery and my flash failed with the error
'file_getprop: failed to stat "/system/build.pro" error executing updater binary in zip.
So what is it I'm doing wrong? Is it coz I'm flashing on top of another ROM? I have no idea, can someone point me in the right direction? I'm not using an ext SD card for this either!
If you can a noob version would be awesome! Thank you so much for reading this!
BilalMH said:
Hi guys, don't know if this is going on the right forum or whatever but I have a problem!
So last week I rooted and flashed my phone to 4.4.2 Google Play Edition (I'm a noob to all of this) may I add that I have a GT-i9505 model with an unlocked bootloader etc (as I have an international s4)
Phone was working fine except for a few bugs such as camera application would stop working.
So I decided to have to have a look around at another ROM to change and flash it and I found the 4.4.2 Liquidsmooth ROM (which looks pretty good and seems to be everything I need) so I started to reflash it all again (as I did before) however I have 35% battery and my flash failed with the error
'file_getprop: failed to stat "/system/build.pro" error executing updater binary in zip.
So what is it I'm doing wrong? Is it coz I'm flashing on top of another ROM? I have no idea, can someone point me in the right direction? I'm not using an ext SD card for this either!
If you can a noob version would be awesome! Thank you so much for reading this!
Click to expand...
Click to collapse
Ok you must wipe your old rom first but MAKE A BACK UP, firstly go into recovery (cwm or twrp) and go to "back up" and make a back up. second go to wipe and wipe cache then wipe dalvic cache (if your using cmw you will have to go to advanced on the home screen to wipe dalvic cache)
third go back to wipe and wipe system, after that wipe the cache and dalvic cache just like before
And for the final stage go to install, find the rom you want (will be a zip file) and then flash it, when done wipe cache and dalvic cache one more time then reboot
And bam you should have you new custom rom (you dont have to keep wiping the cache and dalvic cache but its recomended)
bobs158 said:
Ok you must wipe your old rom first but MAKE A BACK UP, firstly go into recovery (cwm or twrp) and go to "back up" and make a back up. second go to wipe and wipe cache then wipe dalvic cache (if your using cmw you will have to go to advanced on the home screen to wipe dalvic cache)
third go back to wipe and wipe system, after that wipe the cache and dalvic cache just like before
And for the final stage go to install, find the rom you want (will be a zip file) and then flash it, when done wipe cache and dalvic cache one more time then reboot
And bam you should have you new custom rom (you dont have to keep wiping the cache and dalvic cache but its recomended)
Click to expand...
Click to collapse
Thank you, this did the trick!
BilalMH said:
Thank you, this did the trick!
Click to expand...
Click to collapse
Glad i could help :laugh:
the most important thing is read, read and read the instruction before applying any flash.
I always do that and never fail