I was trying to change the partions on my phone and it must have been wrong because it will not turn on at all it wont do anything and my pc identifies it as some wierd name. Please Help!:crying:
I'm sorry, but a very bad idea....unless you're a very experienced programmer. Chances are it is bricked, but can you add some detail?
What does widows show it as, exactly.
And if you hold the power button and volume up and down all at the same time, does anything happen??
Does the phone do anything at all?
And exactly what did you try to do?
Good luck! ?
kj2112 said:
I'm sorry, but a very bad idea....unless you're a very experienced programmer. Chances are it is bricked, but can you add some detail?
What does widows show it as, exactly.
And if you hold the power button and volume up and down all at the same time, does anything happen??
Does the phone do anything at all?
And exactly what did you try to do?
Good luck! ?
Click to expand...
Click to collapse
can you look at my thread and maybe help me!?
Related
hi
i have imate jamin after i finis making a hard spl for it a soft reset done after it the screen flashed and the device off and now i cant restart it what i can do to fix it
plese i nedd help asap
hossamha said:
hi
i have imate jamin after i finis making a hard spl for it a soft reset done after it the screen flashed and the device off and now i cant restart it what i can do to fix it
plese i nedd help asap
Click to expand...
Click to collapse
try holding the camera button, the power button, and poking the reset hole? if this does anything...thats good. from there hopefully you can reflash the hard spl.
i've tried this but there is no response from my device i cant find any way to make my computer find it
i know that you mean the boot loader but my device seems like there is no power on it at all
only if i remove the battery the screen flashed and then nothing
i'm trying to find a way to fix this problem on many sites but i find nothing
so what??????????????????????????????????????
hossamha said:
i've tried this but there is no response from my device i cant find any way to make my computer find it
i know that you mean the boot loader but my device seems like there is no power on it at all
only if i remove the battery the screen flashed and then nothing
i'm trying to find a way to fix this problem on many sites but i find nothing
so what??????????????????????????????????????
Click to expand...
Click to collapse
well, im sorry to say that i do not know near enough about this kind of thing to help you out here - im mostly a beginner myself.
CAN ANYONE ELSE HELP HERE?
so quick question, you are aware that while in the bootloader, the pc does not have to really..RECOGNIZE it...right? as in...active sync will not know its there, and its not going to show up in my computer? but the RUU should recognize it. have you just...tried it?
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
something? PLEASE!
You mention you can not get into boot loader by pressing
Vol_- + reset.
Click to expand...
Click to collapse
On the Diamond you can access bootloader by jsut reseting and holding down the "Vol Down" Key only...
Try this and report back.
Where is this error 260 indicated ? If the ROM starts up and shows some error, the bootloader will work for sure.
Cya,
Viper BJK
try to make an hard reset by press vol down + central button + reset.
maybe you have to use mtty but I can't help you cause I never use it...
R3PUBL1K said:
You mention you can not get into boot loader by pressing
On the Diamond you can access bootloader by jsut reseting and holding down the "Vol Down" Key only...
Try this and report back.
Click to expand...
Click to collapse
That what I told volume down + reset not working with this phone. It is in another one which I have here.
The phone doesn't show any signs of life, I think I need test point or maybe JTAG way to repair it......
Any suggestions?
viperbjk said:
Where is this error 260 indicated ? If the ROM starts up and shows some error, the bootloader will work for sure.
Cya,
Viper BJK
Click to expand...
Click to collapse
I don't know I got this phone it this condition with a story about this error.
I don't actually know what happened, but I believe that this phone bricked down in the middle of unlocking process.
Zoosman said:
The phone doesn't show any signs of life, I think I need test point or maybe JTAG way to repair it......
Any suggestions?
Click to expand...
Click to collapse
If there is no life in the phone then there is not much we offer/say to help.
Have you tried another battery?
omar 1958 said:
...
2. with a fully charged battery, reset your device (hard reset) press Volume down + centre round button + soft reset(behind battery cover) all at the same time, release soft reset but keep holding volume down + centre button. You should now have a white screen advising you what to do to complete the hard reset.
Click to expand...
Click to collapse
Only to make a bit easy this step cause in this way one would be an octopus , soft reset your device with stylus and then, within 3 seconds, hold Vol down + centre round button until you see the tricolour screen. Release the buttons and follow the instructions (Press Vol Up to restore to manufactured settings).
This is the typical case when someone didnt do his homework. Im sure you didnt read the stickies. Poeple be warned, flashing your device can kill it if you dont have a clue on what you are doing. Ive seen a bunch of n00bs bricking their devices just because the didnt read the forum. This question has been ansewred a lot.
Zoosman said:
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
Click to expand...
Click to collapse
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
sorry friend to hear but i have one solution may be it can work u just flash hard spl v 1.93 olinex from here:http://ficca.bounceme.net/download/HARDSpl_Diamond_OliNex_1.93_Unsigned.zip just flash this hspl and after flashing this u can flash any rom but now u just flash this hspl if u got 100% then ur prob is solve so pls tell me what happen after that hope every thing will be alright good luck
Error 260 is a USB communication error. Did this happen during sim unlock or during hardspl install because the thread title says one thing and your post says another.
Zoosman said:
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
Click to expand...
Click to collapse
R3PUBL1K said:
If there is no life in the phone then there is not much we offer/say to help.
Have you tried another battery?
Click to expand...
Click to collapse
I have the same problem.. i tried a flash and then it wont turn on.. not even hard reset not even soft reset.. it wont even charge or indicate charging.
charly_mx said:
This is the typical case when someone didnt do his homework. Im sure you didnt read the stickies. Poeple be warned, flashing your device can kill it if you dont have a clue on what you are doing. Ive seen a bunch of n00bs bricking their devices just because the didnt read the forum. This question has been ansewred a lot.
Click to expand...
Click to collapse
Hey charly, i flashed my phones many times, i've bricked it , got stuck on the tricolour screen.... but this time it's different... the phone it's completely dead... no light .. not charging no tricolour .. nothing:S
try this method for ur diamond
first remove ur battery form ur device and press the power button for 20 seconds . so it will discharge the power from ur device. after that put ur battery and press volume - and power on button to enter boot loader ... dont press reset button to enter bootloader ok !! hope this works for u , best of luck.
noluck
rahmaneee said:
first remove ur battery form ur device and press the power button for 20 seconds . so it will discharge the power from ur device. after that put ur battery and press volume - and power on button to enter boot loader ... dont press reset button to enter bootloader ok !! hope this works for u , best of luck.
Click to expand...
Click to collapse
no luck.... i did the battery on the fridge processs.. no luck with that either... now i'm gonna check the battery with somekind of instrument and after that i'm gonna open my diamond to little pieces and put it back together... in quest for a fix
constantine_mk said:
no luck.... i did the battery on the fridge processs.. no luck with that either... now i'm gonna check the battery with somekind of instrument and after that i'm gonna open my diamond to little pieces and put it back together... in quest for a fix
Click to expand...
Click to collapse
... Because THAT will fix it
hahahha, no no no... the PDA fary will..
dieselboy said:
... Because THAT will fix it
Click to expand...
Click to collapse
hahahha, no no no... the PDA fary will..
a did some measurements, the battery was 2.8V, i put it on the phone, put the phone in ccharger, and it did charge the batery to 3.7V(even the baterry led is not working).. i measured the phone also it gives 4.15V to the battery... i dont know is he charging correctly.. but it's charging the battery for sure.. ..... any clues ppl?
right now my dash, when powered on, will just display a white screen.. when doing a hard-reset...nothing happens, when trying to do to the bootloader thing,the tri-color thing doesnt show but the computer does detect the dash...so i tried an update to stock...and it said that instalation was successful,alltho it was not
IceNova said:
right now my dash, when powered on, will just display a white screen.. when doing a hard-reset...nothing happens, when trying to do to the bootloader thing,the tri-color thing doesnt show but the computer does detect the dash...so i tried an update to stock...and it said that instalation was successful,alltho it was not
Click to expand...
Click to collapse
Welcome to the forum
Have a read here:
http://forum.xda-developers.com/showthread.php?t=397583
And:
http://forum.xda-developers.com/showthread.php?t=415225
Good luck,
i thank you for the swift response,but im sorry to say that those two posts dont help me in the least bit...i fully understand the upgrade process, im just having some technical difficulties that i cant figure out, but please if there is anymore information that i can offer,feel free to ask... im kinda phone-less until i can solve this problem
how about these essages
you tried plugging it into the computer while holding the camera key? also how about the normal press two home keys and cycle the power button? If these dont work PM me and I will help you out. When you use the bootloader make sure that you are flashing back to a tmboile rom
Help please,I put a general password when not using phone to lock..and than my phone felt on the ground and battery separate from phone..When I put the battery back and turned on phone it wont accept my password with message that pass is wrong.
Please help I dont know what to do..and sorry for my bad english.
Thanks
kymcosuper9s said:
Help please,I put a general password when not using phone to lock..and than my phone felt on the ground and battery separate from phone..When I put the battery back and turned on phone it wont accept my password with message that pass is wrong.
Please help I dont know what to do..and sorry for my bad english.
Thanks
Click to expand...
Click to collapse
hard reset your device by Hold down the Power button (Top Right corner) and at the same time press the Stylus tip into the hole where it says “Reset” (Lower Left corner)
Nothing happened after hard reset..Please help,is there any universal password,because I think the phone restart pass
Anybody???
if so, you better reflash ROM....
Can you give me link to tutorial for that action please..thanks man
kymcosuper9s said:
Can you give me link to tutorial for that action please..thanks man
Click to expand...
Click to collapse
I think, you can find it at WIKI ~ http://forum.xda-developers.com/wiki/HTC_BlueAngel
I tried everything but it wont let me to flash rom.It always tell me that my phone is locked.....please help please guys
kymcosuper9s said:
I tried everything but it wont let me to flash rom.It always tell me that my phone is locked.....please help please guys
Click to expand...
Click to collapse
You can Restore the Registry and hope it works else make HardReset!!!
Who think he/she can help me?
I was trying to completely clean my DHD for my girlfriend. So I wiped is all off via all the information on this forum.
Tried to flash ROM, RUU, Bootloader and Kernel. (after some advices)
Now I have a big problem I think....
I cannot get into my bootloader anymore, my DHD is starting with HTC logo and then continues with Android startup and keep hanging in there.
Vol. down + Power is not getting me into bootloader.
Flashing from CMD does not seem to work either because I cannot get the DHD to connect via USB. (cable is connected to DHD and laptop)
If you can help me.... my girlfriend and I would be much gratefull.
Greetings,
Remco
Have you tried pulling the battery for a minute and the doing the volume down + pwr?
droid_ilari said:
Have you tried pulling the battery for a minute and the doing the volume down + pwr?
Click to expand...
Click to collapse
Tried it but that did not help.
Thanks for the reply. Keep helping please.
MightMouse said:
Tried it but that did not help.
Thanks for the reply. Keep helping please.
Click to expand...
Click to collapse
just tried pull out the battery for long priod..maybe a hours.. then try it again to turn on the phone with pressing n hold volume down+power..
JJeamy said:
just tried pull out the battery for long priod..maybe a hours.. then try it again to turn on the phone with pressing n hold volume down+power..
Click to expand...
Click to collapse
I pulled my battery for about 8 hours, so the length of pulling does not seem to be issue.
But again thanks for helping to find a solution.
MightMouse said:
I pulled my battery for about 8 hours, so the length of pulling does not seem to be issue.
But again thanks for helping to find a solution.
Click to expand...
Click to collapse
what i know is accessed to the phone bootloader it just have two optional way..
first...with pressing and hole volume down+power
second..with adb command while the phone is already booting inside the rom..and off course with already enabling USB debugging too in system settings..
if both way doesn't work to access your bootloader...i think the last change is you must flashing it again the from beginning with RIFF BOX hardware and JTAG software if you have it..or take the phone to services center of HTC..
sorry...can't help more than this..
MightMouse said:
Who think he/she can help me?
I was trying to completely clean my DHD for my girlfriend. So I wiped is all off via all the information on this forum.
Tried to flash ROM, RUU, Bootloader and Kernel. (after some advices)
Now I have a big problem I think....
I cannot get into my bootloader anymore, my DHD is starting with HTC logo and then continues with Android startup and keep hanging in there.
Vol. down + Power is not getting me into bootloader.
Flashing from CMD does not seem to work either because I cannot get the DHD to connect via USB. (cable is connected to DHD and laptop)
If you can help me.... my girlfriend and I would be much gratefull.
Greetings,
Remco
Click to expand...
Click to collapse
Take the battery out ... put it back in ...close the battery flap .....hold down vol button for 3 seconds ....then click on the power button while still pressing volume down [Maybe your volume down button is broken....i dont think that its dead]...let me know of your progress
Orion174 said:
Take the battery out ... put it back in ...close the battery flap .....hold down vol button for 3 seconds ....then click on the power button while still pressing volume down [Maybe your volume down button is broken....i dont think that its dead]...let me know of your progress
Click to expand...
Click to collapse
I did that.
It did not work.
MightMouse said:
I did that.
It did not work.
Click to expand...
Click to collapse
Does your phone vibrate (4x or 7x) when you turn it on?
It vibrates ones when showing the HTC startup logo.
I am gonna try
what i know is accessed to the phone bootloader it just have two optional way..
first...with pressing and hole volume down+power
second..with adb command while the phone is already booting inside the rom..and off course with already enabling USB debugging too in system settings..
if both way doesn't work to access your bootloader...i think the last change is you must flashing it again the from beginning with RIFF BOX hardware and JTAG software if you have it..or take the phone to services center of HTC..
sorry...can't help more than this..
Click to expand...
Click to collapse
I am gonna look where to get this software.
Going to a HTC service centrer wont help I think..... Isnt it like "changing the software yourself will exclude HTC help"??
MightMouse said:
It vibrates ones when showing the HTC startup logo.
I am gonna try
I am gonna look where to get this software.
Going to a HTC service centrer wont help I think..... Isnt it like "changing the software yourself will exclude HTC help"??
Click to expand...
Click to collapse
the problem is you must find a 3rd party phone services placed on your country that are already have a riffbox or jtag hardware to flashing your phone from the beginning..
MightMouse said:
It vibrates ones when showing the HTC startup logo.
I am gonna try
I am gonna look where to get this software.
Going to a HTC service centrer wont help I think..... Isnt it like "changing the software yourself will exclude HTC help"??
Click to expand...
Click to collapse
I cannot try this, because I dont have a RIFF box. This is hardware.
MightMouse said:
I cannot try this, because I dont have a RIFF box. This is hardware.
Click to expand...
Click to collapse
yap..RIFFBOX is a flashing hardware..
yes i know..if you already broken your phone cause of changing software by your self..htc will not recover your phone under they warranty
you already had loosing your phone warranty.. but i think that's not mean they can't help and fix your phone..off course without warranty (if they already know or detected that you already fault your warranty) then they will charge you with some of cost..
if so..with the hope of luck..then you can try brought your phone to the htc service center..then let they're analyst your phone and make decision about your valid warranty..who knows you already lucky then they don't know what are you already do it previously to that phone..
note : this all mean that's if your DHD is still recover under warranty by time..right..
hopefully your DHD will fixed soon..and good luck..