Related
Hello Guys,
I am currently on Shpongle and want to move back to stock. Reason being frequent hanging and sluggishness. I have installed the swap performance updates and greenify, but still at times, the phone gets the better of my patience.
MY Questions:
1. How do I go back to stock? I dont think I have the stock nandroid backup. I have the Unlock_code.bin that was sent by HTC.
2. Is there a lightweight Sense ROM? I like the camera, and looks, but I dont like the friendfeed and stuff.
Thanks.
thetuxracer said:
Hello Guys,
I am currently on Shpongle and want to move back to stock. Reason being frequent hanging and sluggishness. I have installed the swap performance updates and greenify, but still at times, the phone gets the better of my patience.
MY Questions:
1. How do I go back to stock? I dont think I have the stock nandroid backup. I have the Unlock_code.bin that was sent by HTC.
2. Is there a lightweight Sense ROM? I like the camera, and looks, but I dont like the friendfeed and stuff.
Thanks.
Click to expand...
Click to collapse
You can use myONEv RC9.5FX+ or Ignorance X for a lighter Sense ROM. You can remove the bloatware with titanium backup as well.
MameTozhio said:
You can use myONEv RC9.5FX+ or Ignorance X for a lighter Sense ROM. You can remove the bloatware with titanium backup as well.
Click to expand...
Click to collapse
Ignorance X does seem nice. Can I use the stock skin with it?
thetuxracer said:
Ignorance X does seem nice. Can I use the stock skin with it?
Click to expand...
Click to collapse
yes it won't look as nice though, since it has internal theming for Ignorance X skin.
MameTozhio said:
yes it won't look as nice though, since it has internal theming for Ignorance X skin.
Click to expand...
Click to collapse
Thank you. Its about to complete downloading. I will install it soon. Will use Titanium Kernel.
Thanks MameTozhio, you are very helpful!
A few questions about it
Sorry for my mistake, please remove it
Hi people.
My device is curretly like this:
N9005
Knox 0x1
TWRP recovery
Stock Kernel
Stock ROM 4.4.2
I would like to return completly to stock. I know I won't be able to be Knox 0x0 again but I want the stock recovery, kernel and ROM.
My question is: can I simply restore the firmware in Kies to get back to stock (including the recovery)?
Stock Rom: http://www.idroidspace.com/primou-original-stock-rom-for-htc-one-v-android-4-0-3-ics/
Stock Kernel and Recovery: http://forum.xda-developers.com/attachment.php?attachmentid=1221449&d=1343236979
I can't tell you if this stock rom is the original one by htc or with some modifications, I only found it and there are much more ruu uploads out there.
jonas2790 said:
Stock Rom: http://www.idroidspace.com/primou-original-stock-rom-for-htc-one-v-android-4-0-3-ics/
Stock Kernel and Recovery: http://forum.xda-developers.com/attachment.php?attachmentid=1221449&d=1343236979
I can't tell you if this stock rom is the original one by htc or with some modifications, I only found it and there are much more ruu uploads out there.
Click to expand...
Click to collapse
Thanks for the links. I have a problem. I decided I want to go back to comfortable stock ROM. I used a custom ROM, on a rooted HTC One V (GSM - Primo U). I followed the intructions: First I installed stock kernel and stock recovery. After I relocked the bootloader. I downloaded the RUU file according to my region (there are 4 european RUU version???). I connected my phone to computer and run the downloaded setup and followed the steps. Only after I started the update process, the progress bar stopped moving (before entering bootloader - the HTC One V didn't reboot into bootloader) and I got an error (155) message. What may be the problem? I have tried the all RUU files according to my region.
Thanks in advance,
Tejcsi
Tejcsi said:
Thanks for the links. I have a problem. I decided I want to go back to comfortable stock ROM. I used a custom ROM, on a rooted HTC One V (GSM - Primo U). I followed the intructions: First I installed stock kernel and stock recovery. After I relocked the bootloader. I downloaded the RUU file according to my region (there are 4 european RUU version???). I connected my phone to computer and run the downloaded setup and followed the steps. Only after I started the update process, the progress bar stopped moving (before entering bootloader - the HTC One V didn't reboot into bootloader) and I got an error (155) message. What may be the problem? I have tried the all RUU files according to my region.
Thanks in advance,
Tejcsi
Click to expand...
Click to collapse
First, install a custom recovery again. Then do a full wipe and install the rom you downloaded (PrimoU_Europe_2.22.401.1_Stock_Rooted_ODEX_FULL.zip or PrimoU_Europe_2.22.401.1_Stock_Rooted_ODEX_LITE.zip) with the custom recovery like you would install a custom rom. Then reboot to fastboot and flash boot.img (not boot-signed.img because this didn't work for me). Try to reboot and if everything works you may install recovery_signed.img, but this is only useful for ota updates, which obviously the hov doesn't get anymore.
jonas2790 said:
First, install a custom recovery again. Then do a full wipe and install the rom you downloaded (PrimoU_Europe_2.22.401.1_Stock_Rooted_ODEX_FULL.zip or PrimoU_Europe_2.22.401.1_Stock_Rooted_ODEX_LITE.zip) with the custom recovery like you would install a custom rom. Then reboot to fastboot and flash boot.img (not boot-signed.img because this didn't work for me). Try to reboot and if everything works you may install recovery_signed.img, but this is only useful for ota updates, which obviously the hov doesn't get anymore.
Click to expand...
Click to collapse
Thanks. Yesterday I've installed the PrimoU_Europe_2.22.401.1_Stock_Rooted_ODEX_FULL.zip ROM, everything O.K., but there is no WIFI on my phone. So I decided to use the RUU. So I don't use boot_signed.img. Which boot.img can I use. Do you send me one?
Tejcsi said:
Thanks. Yesterday I've installed the PrimoU_Europe_2.22.401.1_Stock_Rooted_ODEX_FULL.zip ROM, everything O.K., but there is no WIFI on my phone. So I decided to use the RUU. So I don't use boot_signed.img. Which boot.img can I use. Do you send me one?
Click to expand...
Click to collapse
the boot.img inside the zip file
jonas2790 said:
the boot.img inside the zip file
Click to expand...
Click to collapse
So if i use the boot.img file inside the primou_europe_2.22.401.1_stock_rooted_odex_full.zip file, the RUU can reboot the ONE V into bootloader?
Tejcsi said:
So if i use the boot.img file inside the primou_europe_2.22.401.1_stock_rooted_odex_full.zip file, the RUU can reboot the ONE V into bootloader?
Click to expand...
Click to collapse
I don't really understand your problem. If you want to reboot into bootloader just use adb reboot bootloader.
This is a guide for the Chinese version of the Zopo zp998 which has model number 9520. It seems the roms for ZP998 and 9520 may be compatible, but the bootloader is NOT compatible.
UPDATE: Roms for ZP998 can also be flashed on the 9520, but make sure you don't flash the bootloader. If you flash the bootloader you will brick your phone!
My current experience is that flashing YunOS as base firmware and flashing a customized android stock rom using CWM recovery is working best for me.
Flashing with SP flash tools (See detailed tutorial here:
1. Install the Mediatek USB vcom drivers, which can be found here:
2. Download the firmware which is normally in an archive (.zip) file, extract the archive.
Inside this archive there should be a scatter file and the system.img, boot.img etc.
3. Download and open the SP Flash tool, which can be found here.
4. Select the scatter file of the extracted archive
5. Click on download
6. Turn off your phone, and connect your phone to the PC with your USB cable (Sometimes you maybe need to hold Volume UP while connecting).
7. Wait for the popup which shows Download OK.
List of firmware I've found that can be flashed using SP Flash tool:
YunOS - 3.2.1 (Official) (Mirror coming soon)
Stock android 4.2.2 (Seems a port of ZP998)
Install CWM recovery (Not tested):
Flash the following archive using SP Flash tool: flash_recovery.zip
Booting into recovery:
1. Turn of your phone
2. Connect your phone to the USB cable of your PC
3. It should show a battery icon that it's charging only
4. Press Volume up + power button at the same time for about 5 - 10 sec. (Note sequence is important )
Rooting with recovery:
1. Download SuperSU.zip and put it on your SD card
2. Boot into recovery
2. Apply zip from SD card, select SuperSU.zip
It's also possible to root by using the SP Flash tool.
I'm using this rom:
Custom Android 4.2.2 with lots of optimizations and Gapps included: http://bbs.ydss.cn/thread-388092-1-1.html
Download link: 9520_4.2.2_optimized.zip
Installation instructions:
1. Flash Yunos 2.3.1 firmware using SP Flash tool
2. Install recovery
3. Place 9520_4.2.2_optimized.zip on your sd card
4. Boot into recovery
5. Apply zip from SD card
A Chinese BBS where new roms are being developed for Zopo 9520: http://bbs.ydss.cn/forum-zopu_xiaohei2-1.html
hello dear freind, may i ask is black screen gestures work with this rom?
Please help me to take decision.
Hello Samos,
My friend is in china [Shanghai], he would be returning to India in 10 days. Shall i buy Zopo 9250 from there and use in India? because there he is unable to find Zopo Zp998 mobile. please help me, what can i do after i bought that.? how to change the setting for India location and to change to Android application.? to Usual Zopo ZP998 settings? after that shall i apply all other future application which release for Zopo ZP998?
Regards,
N.Naffes
samos123 said:
This is a guide for the Chinese version of the Zopo zp998 which has model number 9520. It seems the roms for ZP998 and 9520 may be compatible, but the bootloader is NOT compatible.
UPDATE: Roms for ZP998 can also be flashed on the 9520, but make sure you don't flash the bootloader. If you flash the bootloader you will brick your phone!
My current experience is that flashing YunOS as base firmware and flashing a customized android stock rom using CWM recovery is working best for me.
Flashing with SP flash tools (See detailed tutorial here:
1. Install the Mediatek USB vcom drivers, which can be found here:
2. Download the firmware which is normally in an archive (.zip) file, extract the archive.
Inside this archive there should be a scatter file and the system.img, boot.img etc.
3. Download and open the SP Flash tool, which can be found here.
4. Select the scatter file of the extracted archive
5. Click on download
6. Turn off your phone, and connect your phone to the PC with your USB cable (Sometimes you maybe need to hold Volume UP while connecting).
7. Wait for the popup which shows Download OK.
List of firmware I've found that can be flashed using SP Flash tool:
YunOS - 3.2.1 (Official) (Mirror coming soon)
Stock android 4.2.2 (Seems a port of ZP998)
Install CWM recovery (Not tested):
Flash the following archive using SP Flash tool: flash_recovery.zip
Booting into recovery:
1. Turn of your phone
2. Connect your phone to the USB cable of your PC
3. It should show a battery icon that it's charging only
4. Press Volume up + power button at the same time for about 5 - 10 sec. (Note sequence is important )
Rooting with recovery:
1. Download SuperSU.zip and put it on your SD card
2. Boot into recovery
2. Apply zip from SD card, select SuperSU.zip
It's also possible to root by using the SP Flash tool.
I'm using this rom:
Custom Android 4.2.2 with lots of optimizations and Gapps included: http://bbs.ydss.cn/thread-388092-1-1.html
Download link: 9520_4.2.2_optimized.zip
Installation instructions:
1. Flash Yunos 2.3.1 firmware using SP Flash tool
2. Install recovery
3. Place 9520_4.2.2_optimized.zip on your sd card
4. Boot into recovery
5. Apply zip from SD card
A Chinese BBS where new roms are being developed for Zopo 9520: http://bbs.ydss.cn/forum-zopu_xiaohei2-1.html
Click to expand...
Click to collapse
Do you tried yet YunOS on Zopo 998? using Flashtool and unchecking preloader?
youngchaos said:
Do you tried yet YunOS on Zopo 998? using Flashtool and unchecking preloader?
Click to expand...
Click to collapse
I didn't try as I own a 9520 instead of a 998, but that should work I guess. As people with the 9520 can also install roms of 998.
@Naffeshamed: You can just flash roms of zopo zp 998 so if you can either buy it in China or buy the Zopo Zp998 from aliexpress.com its nearly the same price actually.
samos123 said:
I didn't try as I own a 9520 instead of a 998, but that should work I guess. As people with the 9520 can also install roms of 998.
Click to expand...
Click to collapse
But i always need to uncheck preloader, right? I'm asking around and let you know asap
i saw that your model has more support from chinese devs ! That's why i would like know if i can flash their rom aswell , give you some info asap
If you can mirror the YunOS file would be great , bbs so slow... Mega would be great
hi, someone can tell if blackscreen gesture is ok with 9520?
samos123 said:
..
Click to expand...
Click to collapse
Man i found a Lewa Os5 for 9520 on the chinese forum :
http://bbs.ydss.cn/thread-395426-1-1.html
should works good , but it's not for flashtool is for cwm recovery .. i'm afraid to flash it..
Hi,
Thanks for reply.
I have no experience in smart mobile operating, Today I got my Zopo 9520 mobile from china Yun O.S. But please tell me hw can I change it to Android O.S and other installations. why should I change the rom? What are the installations I have to do? please help me on this mate.
my email id is: [email protected]
naffesahmed said:
Hi,
Thanks for reply.
I have no experience in smart mobile operating, Today I got my Zopo 9520 mobile from china Yun O.S. But please tell me hw can I change it to Android O.S and other installations. why should I change the rom? What are the installations I have to do? please help me on this mate.
my email id is: [email protected]
Click to expand...
Click to collapse
yunos isn't an android os ?
Help me on this please
Hi,
Am really sorry. I have poor knowledge on this.
I bought Zopo 9520 from china in Yun O.S. Please tell me the procedure, how to change it to Android O.S and to update the Zopo ZP998 Rom. I have the mobile with me from past 2 weeks, but nothing is understandable in Chinese apps. please help me on this.
Naffes
You have to flash a rom with flashtool (preloader unselected)
tofclaire said:
yunos isn't an android os ?
Click to expand...
Click to collapse
I don't need Yun O.S in my phone, pls help me on this
I bought Zopo 9520 from china in Yun O.S. Please tell me the procedure, how to change it to Android O.S and to update the Zopo Rom. I have the mobile with me from past 2 weeks, but nothing is understandable in Chinese apps. please help me on this. Am from India, I want to use normal phone like Zopo Zp998 Android phone. let me know the procedure.
I have downloaded the Rom from needrom website and it is for ZP 998, can this I apply on my 9250? the name of the downloaded rom is 'FluffyZopo ZP998 V1.01.zip'
No you must flash a other ROM with flashtool
I would like to restore my stock recovery on 1.56.720.6, im unable to find this one on xda, My other option is to extract it from the OTA but there is no link anywhere to download that, can someone help me with this?
EDITL downloaded from htcdev site its a 100mb file do I flash the whole thing using super tool? if so which option should I pick to flash or goto CWM and flash from zip?
does my bootloader need to be locked before I do this?
anyone?
Is that download actually firmware or the OTA update?... I think it's only source code? Did you download it and check in the .zip file what the actual contents are before you just go and flash random .zip files with your version number on it?
As for stock recovery, correct, I can't find that stock recovery either. Just like with the OTA update most guys that get it don't bother making backup and sharing before doing anything.
BerndM14 said:
Is that download actually firmware or the OTA update?... I think it's only source code? Did you download it and check in the .zip file what the actual contents are before you just go and flash random .zip files with your version number on it?
As for stock recovery, correct, I can't find that stock recovery either. Just like with the OTA update most guys that get it don't bother making backup and sharing before doing anything.
Click to expand...
Click to collapse
They don't specify on the HTC site but when I unzip it there is a .tar file inside it, so I assume its either the ota or kernel source which someone more experienced than me can tell me.
Here's the link its filed as a zip under HTC one m8 devices
http://www.htcdev.com/devcenter/downloads
Heey guys,
I want to re-flash my HTC HTV31 to full stock, update and then flash TWRP to recovery to set back all my data.
I went searching for a stock rom. I found several, but all of the download stock KDDI roms are corrupt.
I really want to keep the japanese rom instead of flashing the Taiwanese version.
I found 2 roms on androidfilehost.com but those were corrupt.
The ones you can find here via the forum are all corrupt.
And I also found 1 on Google Drive which was also corrupt.
I checked the MD5 from one the roms downloaded from android file host, the MD5 was correct, so I assumed the zip file was okay.
But it wasn't, I opened it with winrar and also tried to install it. Both times it said the zip file was corrupt.
I really hope someone can help me get android 6.0.1 kddi JP rom on my device, as OTA just doesn't work.
Thanks
Here I have put JP and TW full stock ROMs. Android 6, Sense 7. I even added only a boot partition for JP one so that "root" experts can use it to restore to stock boot partition
http://forum.xda-developers.com/butterfly-3/help/stock-roms-m60-sense70-asia-jp-rooting-t3498350
So I searched the forum but the guides are confusing. This phone was lying in my house so I thought why not use it. Currently it's on stock modified room but I want stock. How should I do it.
I downloaded ysh 's nokia xl Egypt firmware where files are in . Img . What should i do now? Use Nokia x flasher? Or use nokia care suite? Can i flash it just like that or i have to look at rev it something like that ****?
Thanks in advance.
use nokia flasher, its easy!
YuZaGa said:
So I searched the forum but the guides are confusing. This phone was lying in my house so I thought why not use it. Currently it's on stock modified room but I want stock. How should I do it.
I downloaded ysh 's nokia xl Egypt firmware where files are in . Img . What should i do now? Use Nokia x flasher? Or use nokia care suite? Can i flash it just like that or i have to look at rev it something like that ****?
Thanks in advance.
Click to expand...
Click to collapse
Try find your country's firmware. YSH's is Egypt firmware. I have not used other country's firmware. But I think it will be better to use your own country's firmware. and use Nokia x flasher.
i can help just send me your product code
abhijit1998 said:
Try find your country's firmware. YSH's is Egypt firmware. I have not used other country's firmware. But I think it will be better to use your own country's firmware. and use Nokia x flasher.
Click to expand...
Click to collapse
I am Indian but the phone cane from saudi or that's what I know. I would be flashing ysh's firmware (only boot.img and system.img) and see what happens. My product code is 059V6S5.
The only reason i wanted to go to stock because in custom the battery indicator is stuck at the same percentage unless I reboot it in this b -rom and so sad in pac man rom.
YuZaGa said:
I am Indian but the phone cane from saudi or that's what I know. I would be flashing ysh's firmware (only boot.img and system.img) and see what happens. My product code is 059V6S5.
The only reason i wanted to go to stock because in custom the battery indicator is stuck at the same percentage unless I reboot it in this b -rom and so sad in pac man rom.
Click to expand...
Click to collapse
I use B- ROM. It works fine in my phone...
Try this link to find your device model's ROM. And flash using Nokia X flasher.
go here and download all the file you need
http://cellomania.com/ffu/product_codes/059V6S5.html
Sofiane omega said:
go here and download all the file you need
http://cellomania.com/ffu/product_codes/059V6S5.html
Click to expand...
Click to collapse
I tried flashing system, boot (left recovery ) but it remains stuck at bootlogo and tge size of system shows 0 while data shows 23x mb when I didn't even flash data partition. Should I flash all the partitions?
YuZaGa said:
I tried flashing system, boot (left recovery ) but it remains stuck at bootlogo and tge size of system shows 0 while data shows 23x mb when I didn't even flash data partition. Should I flash all the partitions?
Click to expand...
Click to collapse
try to flash it with nokia care suite install it and put all here
C:\ProgramData\Nokia\Packages\Products
make sure you have download all the file on the link i give you not only the img
and make a folder called rm-1030 inside products