Develop Bugs

[ROM] (6/23/12) NANDROID Restore Stock ICS 4.0.4 Galaxy S III T-Mobile T999

NANDROID Restore Stock ICS 4.0.4 Galaxy S III T-Mobile T999​for T-Mobile GS3 T999 only!​
(This Nandroid restore is not rooted and is using the T-Mobile Stock Kernel.)​
Instructions:
1. You must have ROM Manager installed and or ClockworkMod Recovery flashed and an external sdcard installed. Then have the directory and file contents of the "T999-Stock.rar" file parts extracted to your internal SDMemory in the /sdcard/clockworkmod/backup/T999-Stock directory. If the directory does not exist then create it.
There must be a directory called "T999-Stock" in the "/sdcard/clockworkmod/backup" subdirectory and the files must be directly in that directory, not in another nested directory or Nandroid will not find the files. (Note: If you have any spaces in your directory name. You will get a md5 check some error.)
​
2. Run ROM Manager and choose Reboot into Recovery or boot phone into clockworkmod recovery.
3. In recovery go down to backup and restore, choose restore.
4. Select T999-Stock and choose Yes - Restore.
5. When the restore finishes do not reboot yet. Do a "wipe data/factory reset" from the recovery menu (just to be thorough).
6. When it completes choose Reboot.
Click to expand...
Click to collapse
Downloads:
T999-Stock.zip
Enjoy!
Click to expand...
Click to collapse

New to this stuff but is there a .far file for Odin? Always used Odin to get back to stock in the past
Sent from my cm_tenderloin using Tapatalk 2

Glad to see ya here and thx
Sent from my SGH-T999 using Tapatalk 2

avataranjie said:
New to this stuff but is there a .far file for Odin? Always used Odin to get back to stock in the past
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
As far as rar files , well, that's an old school computer thing. As far as what is offered here is a Nandroid restore to get to stock that you restore from ClockworkMod recovery.
1. There is not an oden restore available yet for our phone. And is only needed if you really bone up your phone.
2. Nandroid restore can be done without having to have a PC on hand. You can do it from your phone, anywhere.

Downloading this now then will work with base.

THANK YOU!
This totally saved my behind! I used Titanium Backup to restore too much and it messed up some important system files. Until you posted this, I couldn't send text messages or make calls.
THANK YOU!
-J

http://rootgalaxys3iii.com/root-at-t-galaxy-s3/
Fixboot.tar just in case anything screws up when rooting. Saved some people's lives. Odin if anything happens to phone
Sent from my cm_tenderloin using Tapatalk 2

Could i potentially flash this being on sprint, or does it need to be ported? Thanx...
For international s3?
Edit, says for tmobile only, lmao, i take it thats a no... source code, github? Lol, sorry had a few totties, should start a thread on how many people jack their shniz while intoxicated...
Sent from my SPH-L710 using XDA

It's not ICS 4.4 it's ICS 4.0

Reviewers said:
It's not ICS 4.4 it's ICS 4.0
Click to expand...
Click to collapse
Typo, fixed.
Sent from my Transformer TF101 using XDA Premium HD app

jr71x said:
Could i potentially flash this being on sprint, or does it need to be ported? Thanx...
For international s3?
Edit, says for tmobile only, lmao, i take it thats a no... source code, github? Lol, sorry had a few totties, should start a thread on how many people jack their shniz while intoxicated...
Sent from my SPH-L710 using XDA
Click to expand...
Click to collapse
I don't have a sprint phone, so it's untested. I put tmo only because it came from a tmo phone. I won't support any other.
Sent from my Transformer TF101 using XDA Premium HD app

This is a totally n00b question, sorry.
I put this on an sdmicro card as an insurance policy, under /clockworkmod/backups, stuck it into the back of the S3.
But when i boot into clockwork (from clockworkmod.tar), it doesn't see the sdmicro card at all - it sees the internal 32 GB as '/sdcard' and there doesn't seem to be a way to get CWM to find the one on the actual sdcard (even if I mount sd_external). Is there a way to do that on this thing, or just make sure you copy to internal 'sdcard' over usb? Which I've done now.

it seems that the location of the external is different now so that's probably why you can't see it in recovery
Sent from my SGH-T999 using Tapatalk 2

has anyone "pulled" the stock recovery .img file for the T999 (if it's even possible to grab it somehow?)? It would be great to have a .tar to flash back to that... unless the international stock recovery tar works for it?

afbengochea said:
it seems that the location of the external is different now so that's probably why you can't see it in recovery
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
yep thats the deal, its even odd to use a file explorer to find stuff on sd.

jntdroid said:
has anyone "pulled" the stock recovery .img file for the T999 (if it's even possible to grab it somehow?)? It would be great to have a .tar to flash back to that... unless the international stock recovery tar works for it?
Click to expand...
Click to collapse
Stock recovery.img is the nandroid all you have to is tar it then flash in odin
Sent from my SGH-T999 using Tapatalk 2

will this reset the binary counter to none? because triangle away doesn't work for t999. Is there anyway to reset the counter as of now if this doesn't work?

kodiakice said:
will this reset the binary counter to none? because triangle away doesn't work for t999. Is there anyway to reset the counter as of now if this doesn't work?
Click to expand...
Click to collapse
short answer, no

Can someone post all six files combined? I don't have Winrar..
Powered by the SGSIII

ThC23 said:
Can someone post all six files combined? I don't have Winrar..
Powered by the SGSIII
Click to expand...
Click to collapse
http://www.7-zip.org/ <--free

[Q] LS970 not being recognized by LGNPST

Hello all,
This is my first post here but I will do my best to give as much detail so that you can help me with ease.
Sooo, I have an LS970 and I attempted to flash the ROM and well.... I messed up and (for some dumb reason) didn't make a backup. So I'm stuck at the LG logo. I can't get into recovery mode or anything except Download Mode.
Soooo, I tried using LGNPST as described in the following thread: [REPAIR] TeenyBin for LS970 - Soft Brick Fix. B/L Unlock. RPM/TZ Update {08/21/13}
But the download links for the TeenyBin wouldn't work. So I just downloaded the stock .bin files.
Now, I tried running LGNPST and getting to it recognize my phone and nothing shows up.
I have registered the .dll files, I have installed LGNPST through This thread here
Any suggestions? I really like my LS970 and hate being stuck with a damned iPhone....

Tearraven said:
Hello all,
This is my first post here but I will do my best to give as much detail so that you can help me with ease.
Sooo, I have an LS970 and I attempted to flash the ROM and well.... I messed up and (for some dumb reason) didn't make a backup. So I'm stuck at the LG logo. I can't get into recovery mode or anything except Download Mode.
Soooo, I tried using LGNPST as described in the following thread: [REPAIR] TeenyBin for LS970 - Soft Brick Fix. B/L Unlock. RPM/TZ Update {08/21/13}
But the download links for the TeenyBin wouldn't work. So I just downloaded the stock .bin files.
Now, I tried running LGNPST and getting to it recognize my phone and nothing shows up.
I have registered the .dll files, I have installed LGNPST through This thread here
Any suggestions? I really like my LS970 and hate being stuck with a damned iPhone....
Click to expand...
Click to collapse
Another option is to hope on the irc, there is an autoinstall of LGNPST
You might need to uninstall and reinstall drivers and LGNPST.
Which .bin are you using? Use zvb, or zvc.

engine95 said:
Another option is to hope on the irc, there is an autoinstall of LGNPST
You might need to uninstall and reinstall drivers and LGNPST.
Which .bin are you using? Use zvb, or zvc.
Click to expand...
Click to collapse
I am using the Sprint LS970 ZV9 Stock .bin file provided at pastebin.com/0KK0QynV
I tried using IRC but couldn't get anything rolling.
I guess I don't know as much as I thought. LGNPST was downloaded the link listed above.

Tearraven said:
I am using the Sprint LS970 ZV9 Stock .bin file provided at pastebin.com/0KK0QynV
I tried using IRC but couldn't get anything rolling.
I guess I don't know as much as I thought. LGNPST was downloaded the link listed above.
Click to expand...
Click to collapse
You can find links to the bin files in the root guide, and the irc.
Your problem is probably the radio/modem. ZV9 radio only works on ZV9 Roms. You have JB. If you had recovery you could just flash the radio.
Sent from my LG-LS970 using XDA Premium 4 mobile app

engine95 said:
Another option is to hope on the irc, there is an autoinstall of LGNPST
You might need to uninstall and reinstall drivers and LGNPST.
Which .bin are you using? Use zvb, or zvc.
Click to expand...
Click to collapse
engine95 said:
You can find links to the bin files in the root guide, and the irc.
Your problem is probably the radio/modem. ZV9 radio only works on ZV9 Roms. You have JB. If you had recovery you could just flash the radio.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So what .bin file should I use? and I finally got LGNPST to recognize my phone. So I just want your suggestion on what .bin file to use before I give this thing a whirl.

engine95 said:
Which .bin are you using? Use zvb, or zvc.
Click to expand...
Click to collapse
ZVC is the most current. You can find it in here. http://forum.xda-developers.com/showthread.php?p=35520144
Under bin/tot.
Sent from my LG-LS970 using XDA Premium 4 mobile app

[Q] One click installer help

i been looking around and i'm so lost i got this file I317UCUBMJ4_OneClick_BIN.exe i know this is not the format that odin works with does anyone know how where i can find this "odin one-click "in order to flash this file on my phone

united847 said:
i been looking around and i'm so lost i got this file I317UCUBMJ4_OneClick_BIN.exe i know this is not the format that odin works with does anyone know how where i can find this "odin one-click "in order to flash this file on my phone
Click to expand...
Click to collapse
Go to sky note air rom thread and it has exact install steps for the one click in the op.
Sent from my SAMSUNG-SGH-I317 using Tapatalk

united847 said:
i been looking around and i'm so lost i got this file I317UCUBMJ4_OneClick_BIN.exe i know this is not the format that odin works with does anyone know how where i can find this "odin one-click "in order to flash this file on my phone
Click to expand...
Click to collapse
http://samsung-updates.com/Odin307.zip

Put your phone in download mode and connect to your computer. Then pen the .exe file. It runs a custom version of odin that is baked into the .exe file. It will do the update for you on its own.
CF Auto Root can be used to get root access after you hoar as well.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

[REQUEST] Make a pre-rooted stock odin

I was wondering if someone would be able to help me. I tried making my own pre-rooted stock tar file, but I haven't had any luck.
Would someone smarter than me be able to do this for me?
Here is the stock tar file w/o KNOX that I put together: https://www.box.com/s/absjpo7kwmgjogbg99uz
Thanks in advance for any help.
FWIW, I am using Cygwin on Win 8.1 and can't figure out how to install Ext4_utils on it. I am downloading ubuntu and will try dual booting it but I figured I'd ask in case someone on here does this fairly often/quickly.

showcasemodr said:
I was wondering if someone would be able to help me. I tried making my own pre-rooted stock tar file, but I haven't had any luck.
Would someone smarter than me be able to do this for me?
Here is the stock tar file w/o KNOX that I put together: https://www.box.com/s/absjpo7kwmgjogbg99uz
Thanks in advance for any help.
FWIW, I am using Cygwin on Win 8.1 and can't figure out how to install Ext4_utils on it. I am downloading ubuntu and will try dual booting it but I figured I'd ask in case someone on here does this fairly often/quickly.
Click to expand...
Click to collapse
What build number are you looking for?
Sent from my SPH-L710 using Tapatalk

jdsingle76 said:
What build number are you looking for?
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
Hmm I guess I am not following you. I just need somebody to pre-root that tar file. It's a stock image pulled from kies for an SGS3 that is carried by Nex-tech Wireless.

OTA update bricked my phone. Need advice

Hi all,
mt LG Optimous Pro G E988 has been working fine for 6 months,
But over night there was a OTA update, and now my phone is "stuck"
I say stuck because it will boot with the message
"Secure Booting Error"
"Cause: Device Unlock!! So Boot Sucess!!!"
then it goes into my CWM Recovery....
I had rooted with cwm
Here is where I am having the problem. It never fully installed the OTA update, because I had a boot loader installed.
I had tried to wipe everything and do a factory update, but no use.
I also tried using LG Mobile Support Tool to reflash the factory ROM
as per: http://forum.xda-developers.com/showpost.php?p=45953380&postcount=1
Yesterday when I tried it, the LG f;lash tool said it was not able to connect to the LG Server
But today the program is saying there is not enough power and may cause a problem.
I have just charged the phone for 9 hrs straight. I don't believe that it's undercharged
Is there a way for me to flash the phone with the original ROM without connecting to LG's server (using their Support Tool)?
Please help.
Thanks

Since you already have CWM installed I hope you have a backup which you can restore. Backup your apps and settings using tools like super backup or titanium. Then reload the JB 4.1.2 kdz from pc. You can look for the steps on xda forums. Once that is done successfully you will loose root. Then try official update via OTA. Or you can try to update via pc tool. Someone already shared the kitkat kdz on xda forums. You can try that too. All the best.
Sent from my X9006 using Tapatalk

DroidSK said:
Since you already have CWM installed I hope you have a backup which you can restore. Backup your apps and settings using tools like super backup or titanium. Then reload the JB 4.1.2 kdz from pc. You can look for the steps on xda forums. Once that is done successfully you will loose root. Then try official update via OTA. Or you can try to update via pc tool. Someone already shared the kitkat kdz on xda forums. You can try that too. All the best.
Sent from my X9006 using Tapatalk
Click to expand...
Click to collapse
Thanks
Unfortunately I do not have the backup anymore.
I also tried updating via the LG Mobile Support Tool, which did not work as it gives an error about not being able to connect to the server
I tried the guide from Madmack "[GUIDE] [E980] Fix soft bricks. Flash back to stock using LGFLashTools"
But I have not been able to locate the TOT file for the international E988
I tried to use the one he provided and it did not work (yea I'm desperate to try anything now)
Anyone out there have a TOT file for the international E988?
Or is there a way to crate one from the KDZ files?
please help
thanks

Not sure why you need a tot file. Kdz is fine. Look in xda for guides on loading the kdz file. That is a sure way of unbricking your phone. If it is still bricking after kdz load go jnto stock recovery and clear all caches and reboot. Most guides i have used mention this as an optional step.
Sent from my X9006 using Tapatalk

DroidSK said:
Not sure why you need a tot file. Kdz is fine. Look in xda for guides on loading the kdz file. That is a sure way of unbricking your phone. If it is still bricking after kdz load go jnto stock recovery and clear all caches and reboot. Most guides i have used mention this as an optional step.
Sent from my X9006 using Tapatalk
Click to expand...
Click to collapse
Hi im in the same problem, can any of you post a tut on how to do it

dumbrobot said:
Hi im in the same problem, can any of you post a tut on how to do it
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2438088

Same thing happened to me with the value update. You have no choice but to reflash stock with the lg flash tool. I flashed mine with the telcel flashware but got brave enough before the kitkat update to flash back to att with .tot file .You should be fine once you reflash stock
Sent from my LG-E980 using XDA Free mobile app

Here is the link to the tutorial ... http://www.cellrabta.pk/2013/10/how-to-flash-big-kdz-files-optimus-g-gk-g-pro-g2-and-others/.
Note that it is not my own but a tutorial that I used successfully for my phone multiple times.
And here is the link to the XDA forum discussion that has links for the KDZ downloads ... http://forum.xda-developers.com/showthread.php?t=2438088
Hope this helps.
Sent from my N550JV using Tapatalk