Related
I've been posting here and there around here lately but thought I'd get a cleaner, more focused thread going for those of us who used HTC's unlock tool and want root.
I managed to get the bootloader unlocked with HTC's tool and installed SU and clockwork onto my Inc2 but I think I'm having problems because I'm still S-On instead of S-Off.
So, what do we do next after unlocking the bootloader? I'm under the impression that because I'm S-On still, I can flash a custom ROM, but not only the ones with the stock kernel intact. This would be why Sabotage was able to install, but Mik wouldn't. Still only a theory, though.
ANY HELP PLEASE!!!
Kayak83 said:
I've been posting here and there around here lately but thought I'd get a cleaner, more focused thread going for those of us who used HTC's unlock tool and want root.
I managed to get the bootloader unlocked with HTC's tool and installed SU and clockwork onto my Inc2 but I think I'm having problems because I'm still S-On instead of S-Off.
So, what do we do next after unlocking the bootloader? I'm under the impression that because I'm S-On still, I can flash a custom ROM, but not only the ones with the stock kernel intact. This would be why Sabotage was able to install, but Mik wouldn't. Still only a theory, though.
ANY HELP PLEASE!!!
Click to expand...
Click to collapse
There are 2 options to flash a custom ROM that has a custom kernel on an unlocked bootloader.
1. Instead of booting to recovery mode directly, you need to boot in Fastboot mode and issue the command:
Fastboot boot [path to custom recovery.img]
This will boot you into recovery mode using the custom recovery image. Then you can flash a custom ROM with a custom kernel correctly.
2. Extract the boot.img from the custom ROM zip file and copy it to your SDK tool directory.
Then boot into recovery mode and flash the custom ROM. Next you must reboot into bootloader mode and enter Fastboot mode. Enter the following command:
Fastboot flash boot [path to the boot.img file].
Try either option 1 or option 2. You do not need to do both.
Hope this helps.
tpbklake said:
There are 2 options to flash a custom ROM that has a custom kernel on an unlocked bootloader.
1. Instead of booting to recovery mode directly, you need to boot in Fastboot mode and issue the command:
Fastboot boot [path to custom recovery.img]
This will boot you into recovery mode using the custom recovery image. Then you can flash a custom ROM with a custom kernel correctly.
2. Extract the boot.img from the custom ROM zip file and copy it to your SDK tool directory.
Then boot into recovery mode and flash the custom ROM. Next you must reboot into bootloader mode and enter Fastboot mode. Enter the following command:
Fastboot flash boot [path to the boot.img file].
Try either option 1 or option 2. You do not need to do both.
Hope this helps.
Click to expand...
Click to collapse
Tried option 1 and when I go to select install zip from sd card after booting to cwm the phone restarts. Trying option 2 now...
Option #2 won't work since I get stuck at the HTC screen when trying to load a custom ROM.
Kayak83 said:
Option #2 won't work since I get stuck at the HTC screen when trying to load a custom ROM.
Click to expand...
Click to collapse
How did you try to reboot into bootloader from recovery once the ROM was flashed. Once I get into recovery I connect the phone with a USB cable and then type
Adb reboot bootloader
This will boot you into HBOOT straight from recovery and should prevent the hang at the HTC.
Ok. Let's start fresh and complete:
1- Plug phone into computer.
2- select HTC sync on phone
3- open cmd and get to sdk
4- type "adb reboot bootloader"
5- phone should reboot to HTC's recovery thing
now what?
I have cwm installed already.
Kayak83 said:
Ok. Let's start fresh and complete:
1- Plug phone into computer.
2- select HTC sync on phone
3- open cmd and get to sdk
4- type "adb reboot bootloader"
5- phone should reboot to HTC's recovery thing
now what?
I have cwm installed already.
Click to expand...
Click to collapse
Just select Charge Only, not HTC Sync.
Once you type adb reboot bootloader you should get the HBOOT screen and it should show FASTBOOT USB.
At this point you should enter Fastboot commands from you PC command prompt.
So you said you tried fastboot boot [path to recovery.img file] and it did boot you into recovery, right? Then you should be able to flash the custom ROM and reboot normally when the install is complete.
For option 2 once you are in recovery mode flash the custom ROM and then when it is finished connect the phone with the USB cable and at the command prompt you should be able to type adb devices and it will respond with your device id.
If it does, then type adb reboot bootloader and it will take you back to the HBOOT screen. From there you would then enter the following Fastboot command:
Fastboot flash boot [path to boot.img file]
Then Fastboot reboot
tpbklake said:
Just select Charge Only, not HTC Sync.
Once you type adb reboot bootloader you should get the HBOOT screen and it should show FASTBOOT USB.
At this point you should enter Fastboot commands from you PC command prompt.
So you said you tried fastboot boot [path to recovery.img file] and it did boot you into recovery, right? Then you should be able to flash the custom ROM and reboot normally when the install is complete.
For option 2 once you are in recovery mode flash the custom ROM and then when it is finished connect the phone with the USB cable and at the command prompt you should be able to type adb devices and it will respond with your device id.
If it does, then type adb reboot bootloader and it will take you back to the HBOOT screen. From there you would then enter the following Fastboot command:
Fastboot flash boot [path to boot.img file]
The Fastboot reboot
Click to expand...
Click to collapse
I'm able to fastboot into cwm. But when I go to select install zip from sd card via the phone controls (volume up/down/power), the phone reboots.
Kayak83 said:
I'm able to fastboot into cwm. But when I go to select install zip from sd card via the phone controls (volume up/down/power), the phone reboots.
Click to expand...
Click to collapse
Which version of CWM are ou using. I use CWM 5.0.2 and it works fine.
SUCCESS. Thanks for your help!
Glad you got it goin!
Sent from my ADR6350 using xda premium
Kayak83 said:
SUCCESS. Thanks for your help!
Click to expand...
Click to collapse
Which option did you have success with?
dumb question but...
how do you find the path to your custom recovery?
mza929 said:
dumb question but...
how do you find the path to your custom recovery?
Click to expand...
Click to collapse
You determine what the path is when you download the recovery image to your PC. The best place to download or copy it to is the same folder you run adb.exe and fastboot.exe from.
tpbklake said:
You determine what the path is when you download the recovery image to your PC. The best place to download or copy it to is the same folder you run adb.exe and fastboot.exe from.
Click to expand...
Click to collapse
great thank you... i was thinking i had to use a path to the recovery on my phone's storage not my PC's...
Can someone link me to a cwm recovery that works. I'm having the reboot issue after selecting choose file from SD card.
Sent from my dinc2 using XDA App
mza929 said:
Can someone link me to a cwm recovery that works. I'm having the reboot issue after selecting choose file from SD card.
Sent from my dinc2 using XDA App
Click to expand...
Click to collapse
You should look for and use CWM 5.0.2
Kayak83 said:
I've been posting here and there around here lately but thought I'd get a cleaner, more focused thread going for those of us who used HTC's unlock tool and want root.
I managed to get the bootloader unlocked with HTC's tool and installed SU and clockwork onto my Inc2 but I think I'm having problems because I'm still S-On instead of S-Off.
So, what do we do next after unlocking the bootloader? I'm under the impression that because I'm S-On still, I can flash a custom ROM, but not only the ones with the stock kernel intact. This would be why Sabotage was able to install, but Mik wouldn't. Still only a theory, though.
ANY HELP PLEASE!!!
Click to expand...
Click to collapse
OK maybe I am missing something here. Do you actually have full root? If you do, how did you get it? I don't know how to get the su binary and busybox installed. I have unlocked my bootloader using the htc supertool and I don't have root, which is keeping me from installing CWM or anything root related for that matter. I have not seen any instructions on how to root this thing since the unlock tool became compatible 3 days ago. But maybe I have missed something.
Thanks for any help.
Still cant get rom to boot... however, i have been able to fastboot into custom recovery and complete the flashing process...
Now i am just stuck at the HTC screen after reboot.
Any suggestions?
Thank you all so far. You have been most helpful.
***** update ***** I finally got it after fast booting into recovery, flashing rom, and then extracting boot.img from that rom and flashing it via fastboot.
mza929 said:
Still cant get rom to boot... however, i have been able to fastboot into custom recovery and complete the flashing process...
Now i am just stuck at the HTC screen after reboot.
Any suggestions?
Thank you all so far. You have been most helpful.
***** update ***** I finally got it after fast booting into recovery, flashing rom, and then extracting boot.img from that rom and flashing it via fastboot.
Click to expand...
Click to collapse
Yes good job. The last part is the key to getting a custom ROM installed. Glad it worked for you.
---------- Post added at 09:13 AM ---------- Previous post was at 09:09 AM ----------
hackweed said:
OK maybe I am missing something here. Do you actually have full root? If you do, how did you get it? I don't know how to get the su binary and busybox installed. I have unlocked my bootloader using the htc supertool and I don't have root, which is keeping me from installing CWM or anything root related for that matter. I have not seen any instructions on how to root this thing since the unlock tool became compatible 3 days ago. But maybe I have missed something.
Thanks for any help.
Click to expand...
Click to collapse
After you have an unlocked HBOOT, you need to flash CWM recovery image in FASTBOOT mode. Once you have CWM installed, you can install the latest SU-3.0.xx.zip to root your current ROM and then you can installl and use root programs like ROM Manager, Busybox, Titianium Backup, etc. or you can install a rooted custom ROM.
hello android geniuses first of sorry about this once my phone is working again i will not mess with it anymore
okay so i was feeling cool and rooted my htc one m7 from verizon then i turned s-off and unlocked bootloader
then i flashed a custom rom it was paranoid android everything worked except i wasnt getting any service on the phone so i was told to flash a verizon htc one rom so i went and flashed viper 6.2 but the phone got stuck in a bootloop so for some reason i thought that doing a factory reset/wipe from the recovery would fix it....it didnt and now i cant reflash the rom either....i tried to sideload but adb wont recognize my device while fastboot recognizes the phone adb wont
what am i to do?
Well im not sure of any other methods to try but i had loads of problems myself pushing files to the SDcard threw twrp and cwm recoveries, so the way I went about it was doing a decrypted RUU to return the phone to stock then once it loaded up in Android I pushed the Rom to the SDcard card then rebooted and started over.
Goto this thread http://forum.xda-developers.com/showpost.php?p=46506621&postcount=2
All the way at the bottom you should see some links for RUU's, I used the one labeled "1.10.605.15 Decrypted RUU" You will flash this the same way as you would a firmware update, if you dont know how thats done that post will explain it all. After you flash the RUU reboot and it should be back to the day you got it, but you will still be s-off, at that point just put a custom recovery back on and flash away, however that RUU will downgrade your firmware so you might wanna update your firmware after you get the phone booted up and your rom placed back on the sdcard
fLaWx said:
Well im not sure of any other methods to try but i had loads of problems myself pushing files to the SDcard threw twrp and cwm recoveries, so the way I went about it was doing a decrypted RUU to return the phone to stock then once it loaded up in Android I pushed the Rom to the SDcard card then rebooted and started over.
Goto this thread http://forum.xda-developers.com/showpost.php?p=46506621&postcount=2
All the way at the bottom you should see some links for RUU's, I used the one labeled "1.10.605.15 Decrypted RUU" You will flash this the same way as you would a firmware update, if you dont know how thats done that post will explain it all. After you flash the RUU reboot and it should be back to the day you got it, but you will still be s-off, at that point just put a custom recovery back on and flash away, however that RUU will downgrade your firmware so you might wanna update your firmware after you get the phone booted up and your rom placed back on the sdcard
Click to expand...
Click to collapse
What he said. Good post dude.
When you enabled adb sideload, what command did you use? Because you don't push files that way. You type "adb sideload Rom.zip", then it will send the file and after it sends immediately start the install. So you will need to wipe in recovery first to make sure it's clean.
Sent from my Lunar Ecliptic One.
i followed your steps i got to the part where fastboot asks to flush the zip again i typed "fastboot flash zip firmware.zip" and it said waiting for device and that never went away so i rebooted into bootloader and now fastboot wont recognize the device however if i go to device manager it says my htc is plugged but has a little yellow icon...the drivers are up to date this is driving me nuts i just want my phone to work
Ruu
sound like you may need to ruu back to total stock there are instruction on doing it here and I do not want to give you the wrong steps. found this but make sure you have the decrypted ruu
1. Download VZW RUU.zip from the following thread 1. Download VZW RUU.zip from the following thread (http://forum.xda-developers.com/show....php?t=2428276)
2. Rename to "ruu.zip"
3. Enter fastboot mode
4. enter "fastboot oem rebootRUU" - You should not see a silver HTC logo on your device.
5. enter "fastboot flash zip ruu.zip" - The first time you execute this command, it only prepares the flash
6. As soon as the flash is done preparing, enter the same exact command again "fastboot flash zip ruu.zip"
7. Now you'll see a little green progress bar on your phone. This does not need to reach 100%. As soon as your command window is finished, you can just "fastboot reboot".
8. You should be set back to fully stock HTC One.
http://www.htc1guru.com/dld/ruu-zip-m7_wl_jb_50_vzw_1-10-605-10_decrypted-zip/
I also use cut and paste when doing this as it stops my crappy spelling from getting in the way
The problem now is that fastboot wont recognize the device, when i type "fastboot devices" its blank
i think i screwed up the firmware becouse in fastboot it says in red os-3.11.605.1 (1.10.605.15) in red
before i remember it was green that spot...oh crap i wont be able o buy a new phone in a long time this is terrible....i still have teamwin recovery can i do anything through that?
quadracorn said:
The problem now is that fastboot wont recognize the device, when i type "fastboot devices" its blank
i think i screwed up the firmware becouse in fastboot it says in red os-3.11.605.1 (1.10.605.15) in red
before i remember it was green that spot...oh crap i wont be able o buy a new phone in a long time this is terrible....i still have teamwin recovery can i do anything through that?
Click to expand...
Click to collapse
You could always use a USB-OTG, place a rom on a flash drive and try to install that way. There may be a simpler way, but that's all i can think of for now.
i guess i have to order an otg cable....oh well...ill have to live without a phone a bit longer until cable shows up haha XD w
quadracorn said:
The problem now is that fastboot wont recognize the device, when i type "fastboot devices" its blank
i think i screwed up the firmware becouse in fastboot it says in red os-3.11.605.1 (1.10.605.15) in red
before i remember it was green that spot...oh crap i wont be able o buy a new phone in a long time this is terrible....i still have teamwin recovery can i do anything through that?
Click to expand...
Click to collapse
Does pc see device in computer?if so down load room onto pc place Rom on root of ad card or in download and reboot phone into recovery ahs flash zip..I also had problem where adb would not see devices cause I had miniadb and the full version of adb and it was a conflict,just my two cents
I don't know if this will help, but I had an issue of my devices not being found so I followed this guy's guide: http://zacktutorials.blogspot.com/2013/04/adb-is-not-recognized-as-internal-or.html
and was able to get my device recognized. Also which recovery are you using? I don't know if it's still an issue but when I was on viper I got stuck in a bootloop with TWRP so I switched to Philz.
If you're able to get into fastboot, follow post #4 http://forum.xda-developers.com/showthread.php?t=2677015 and basically start from the beginning.
Make sure you have the latest recovery, the latest firmware (radios and such), and the correct ROM..
good luck
bregga said:
sound like you may need to ruu back to total stock there are instruction on doing it here and I do not want to give you the wrong steps. found this but make sure you have the decrypted ruu
1. Download VZW RUU.zip from the following thread 1. Download VZW RUU.zip from the following thread (http://forum.xda-developers.com/show....php?t=2428276)
2. Rename to "ruu.zip"
3. Enter fastboot mode
4. enter "fastboot oem rebootRUU" - You should not see a silver HTC logo on your device.
5. enter "fastboot flash zip ruu.zip" - The first time you execute this command, it only prepares the flash
6. As soon as the flash is done preparing, enter the same exact command again "fastboot flash zip ruu.zip"
7. Now you'll see a little green progress bar on your phone. This does not need to reach 100%. As soon as your command window is finished, you can just "fastboot reboot".
8. You should be set back to fully stock HTC One.
http://www.htc1guru.com/dld/ruu-zip-m7_wl_jb_50_vzw_1-10-605-10_decrypted-zip/
I also use cut and paste when doing this as it stops my crappy spelling from getting in the way
Click to expand...
Click to collapse
Hi All,
Do you know is RUU 4.4 has surfaced? please help
Hey there
I want to start off by saying I have very little experience with rooting, but am very familiar with jailbreaking apple devices so I figured i could manage.
I have a htc one m8 on rogers network locked. I rooted it and had super user and all that jazz, then flashed AOKP. Then I thought i actually liked the stock HTC sense better, so I tried to "get things back to normal"...lol.
Now im at the point where if i turn my phone on it goes straight to the fastboot screen(?) with all the "fast boot, recovery, factory reset, etc". Since I'm super new to all of this is there anybody that can write some instructions on how to get my phone back to stock? I would really appreciate it after panicking over this for 3 days.
Edit: In the fastboot screen at the top it says ***Tampered*** ***Relocked*** ***security warning**
also when i try to press recovery it shows the htc screen for 1 second then back to the same menu
i found this http://forum.xda-developers.com/showthread.php?t=2710735 but i cannot even get into recovery
haydenrbm said:
Hey there
I want to start off by saying I have very little experience with rooting, but am very familiar with jailbreaking apple devices so I figured i could manage.
I have a htc one m8 on rogers network locked. I rooted it and had super user and all that jazz, then flashed AOKP. Then I thought i actually liked the stock HTC sense better, so I tried to "get things back to normal"...lol.
Now im at the point where if i turn my phone on it goes straight to the fastboot screen(?) with all the "fast boot, recovery, factory reset, etc". Since I'm super new to all of this is there anybody that can write some instructions on how to get my phone back to stock? I would really appreciate it after panicking over this for 3 days.
Click to expand...
Click to collapse
While being an expert with rooting and flashing custom recoveries on Samsung devices, I am also new to the world of HTC. Out of curiosity, what happens when you hit factory reset?
Unlock the boot loader again then install twrp recovery then head over to the stock backup thread and flash one of the nandroids for your cid.
MattMJB0188 said:
While being an expert with rooting and flashing custom recoveries on Samsung devices, I am also new to the world of HTC. Out of curiosity, what happens when you hit factory reset?
Click to expand...
Click to collapse
When i hit factory reset it the screen changes to the HTC in green for 1 second then back to where i started
ashyx said:
Unlock the boot loader again then install twrp recovery then head over to the stock backup thread and flash one of the nandroids for your cid.
Click to expand...
Click to collapse
I would...but when im trying to use ADB devices it isn't found
haydenrbm said:
When i hit factory reset it the screen changes to the HTC in green for 1 second then back to where i started
I would...but when im trying to use ADB devices it isn't found
Click to expand...
Click to collapse
Do fastboot devices ... adb commands itself won't work in bootloader, it has to be fastboot commands.
now you have a locked bootloader which means you cant do anything.. so your first step is to unlock it again then flash a custom recovery (TWRP) after that flash the stock rom+ boot.img ( to be safe) make sure it boots. RELOCK the bootloader then flash your firmware.zip.. hope it helps
mushages said:
now you have a locked bootloader which means you cant do anything.. so your first step is to unlock it again then flash a custom recovery (TWRP) after that flash the stock rom+ boot.img ( to be safe) make sure it boots. RELOCK the bootloader then flash your firmware.zip.. hope it helps
Click to expand...
Click to collapse
How can I unlock the bootloader again without the device showing in adb?
haydenrbm said:
How can I unlock the bootloader again without the device showing in adb?
Click to expand...
Click to collapse
i think you have your unlock token. start from here
http://www.htcdev.com/bootloader/unlock-instructions/page-4/
haydenrbm said:
How can I unlock the bootloader again without the device showing in adb?
Click to expand...
Click to collapse
If it's in bootloader it should show in command prompt when you type fastboot devices after connecting it to PC. If it doesn't then there is a driver problem perhaps. Check to make sure you have HTC drivers installed, or reinstall them. Might as well make sure adb is up to date as well, can do that through the Android SDK Manager. Another possibility might be that the usb cable isn't working correctly, try another cable. Fact of the matter though is, if it's in bootloader and you connect it to the PC adb/fastboot SHOULD pick it up.
So check and fix those things. Also make sure you use the correct commands, in bootloader mode, it'll be fastboot commands, not "adb devices" but "fastboot devices" ... "fastboot reboot" etc etc. Also make sure you're running the commands from within the adb/fastboot folder path(just for in case yeah...)
mushages said:
i think you have your unlock token. start from here
Click to expand...
Click to collapse
Okay it is unlocked, but now it just stays on the AOKP boot screen
Thank you for the help btw, it must be very painful.
haydenrbm said:
Okay it is unlocked, but now it just stays on the AOKP boot screen
Thank you for the help btw, it must be very painful.
Click to expand...
Click to collapse
Press Volume UP + Power button, once the screen goes dead, press Volume DOWN + Power button to get back into bootloader. Then flash a custom recovery (Like TWRP) and start flashing the Stock nandroid backups, can be found from here Collection of Stock backups
BerndM14 said:
Press Volume UP + Power button, once the screen goes dead, press Volume DOWN + Power button to get back into bootloader. Then flash a custom recovery (Like TWRP) and start flashing the Stock nandroid backups, can be found from here Collection of Stock backups
Click to expand...
Click to collapse
Okay i have got into the bootloader now, thanks.
I cannot put the rom into the internal storage because my computer wont detect the phone
haydenrbm said:
Okay i have got into the bootloader now, thanks.
the adb devices will show it if i have it in recovery mode but not bootloader, why is that ?
Click to expand...
Click to collapse
You didn't read any of my posts about that, did you? lol
I already stated adb commands like "adb devices" "adb reboot" etc will NOT work in bootloader, it'll work in the system and yes, it'll work in recovery for sideloading etc, but NOT in bootloader. For bootloader you HAVE to use fastboot commands, "fastboot devices" "fastboot reboot" "fastboot oem lock" "fastboot oem get_identifier_token" "fastboot flash unlocktoken Unlock_code.bin" etc etc
BerndM14 said:
You didn't read any of my posts about that, did you? lol
I already stated adb commands like "adb devices" "adb reboot" etc will NOT work in bootloader, it'll work in the system and yes, it'll work in recovery for sideloading etc, but NOT in bootloader. For bootloader you HAVE to use fastboot commands, "fastboot devices" "fastboot reboot" "fastboot oem lock" "fastboot oem get_identifier_token" "fastboot flash unlocktoken Unlock_code.bin" etc etc
Click to expand...
Click to collapse
Sorry I skipped past your first response, that makes sense now.
So I need to put the rom on my internal storage then go into recovery and install the zip using TWRP..but when I plug my phone into the computer the internal storage wont show up.
I do have sync manager installed also, and it wont show up in that either
haydenrbm said:
Okay i have got into the bootloader now, thanks.
I cannot put the rom into the internal storage because my computer wont detect the phone
Click to expand...
Click to collapse
With that adb devices command again in bootloader? Did you flash TWRP yet? If so, Got to Advanced >>> ADB Sideload >>> Swipe to start sideload.
Place the ROM.zip file in your adb folder then:
Connect phone to PC, while still in recovery mode type adb devices to make sure your device gets picked up, should show you the serial number for device AS WELL as "sideload" next to it, if so then you are hooked up right. Next type adb sideload name_of_zip.zip wait until fully finished.
If sideload fails for one or other reason you can also try to push it. Reboot to recovery again, type adb devices to make sure device gets picked up, type adb push name_of_zip.zip /data/media/0/ or adb push name_of_zip.zip /sdcard/ flash as per usual then.
Yet somehow I don't think you even need to go to these steps
BerndM14 said:
With that adb devices command again in bootloader? Did you flash TWRP yet? If so, Got to Advanced >>> ADB Sideload >>> Swipe to start sideload.
Place the ROM.zip file in your adb folder then:
Connect phone to PC, while still in recovery mode type adb devices to make sure your device gets picked up, should show you the serial number for device AS WELL as "sideload" next to it, if so then you are hooked up right. Next type adb sideload name_of_zip.zip wait until fully finished, once done reboot back into recovery and flash rom.
If sideload fails for one or other reason you can also try to push it. Reboot to recovery again, type adb devices to make sure device gets picked up, type adb push name_of_zip.zip /data/media/0/ or adb push name_of_zip.zip /sdcard/ flash as per usual then.
Yet somehow I don't think you even need to go to these steps
Click to expand...
Click to collapse
haha..thank you for baby steps
The sideload completed and i rebooted then went back into recovery and install but there isn't a zip file anywhere
Edit: wow..some how i reset it and it turned on and got into the phone... and now it connects to the computer so i should be able to follow the other tutorial now...man you are a life saver thank you so much
haydenrbm said:
haha..thank you for baby steps
The sideload completed and i rebooted then went back into recovery and install but there isn't a zip file anywhere
Edit: wow..some how i reset it and it turned on and got into the phone... and now it connects to the computer so i should be able to follow the other tutorial now...man you are a life saver thank you so much
Click to expand...
Click to collapse
I made a small mistake with the sideload though, it actually installs automatically as such you don't have to go back into recovery to flash, as it did it already, sorry. Edited post to fix.
Well as long as you can get into phone now to copy the nandroid backup to the phone all should be in order, can flash back stock from the nandroid then.
Glad it worked out then.:good:
BerndM14 said:
I made a small mistake with the sideload though, it actually installs automatically as such you don't have to go back into recovery to flash, as it did it already, sorry. Edited post to fix.
Well as long as you can get into phone now to copy the nandroid backup to the phone all should be in order, can flash back stock from the nandroid then.
Glad it worked out then.:good:
Click to expand...
Click to collapse
Hello BerndM14, thank you for this baby steps. Mine m8 is a gpe version, it's 4.4.2 google rom, rooted, cwm recovery, s-on. I was trying to flash the full google 4.4.3 zip rom under recovery, however, after that, my m8 automaticlly enter recovery everytime reboot. And I can manually enter the bootloader, my pc can find the m8 both in recovery and bootloader. I searched this post, and do it accordingly, I download the gpe stock backup KOT49H.H16 - 1.16.1700.16 - CWM Philz touch and use adb sideload gpe3.zip to the cell phone sucessfully, then the recovery automaticlly starts installing rom, then, I got below message:
-- Erasing & formatting /system as ext4 (Unmounted system)
system partition formatted!
-- Mounting system partition for writing
Writing rom system to system partition
Rom system written successfully!
@symlinking and permissions
--Creating toolbox symlinks
--creating additional symlinks
Symlinks Set!
--installing busybox
Set_perm: some changes failed
E:Error in /tmp/update.zip
(status 7)
installation aborted.
Install from sideload complete.
then, I reboot it manually. problem still there, still enter the recovery automaticlly.
do you have any comments on this? please.
thanks,
Hello guys,
I decided to install Twrp 2.7.01 in order to flash custom rom. So, i do that :
C:\Fastboot>fastboot flash recovery recovery.img
It work and send me Okay.
But, when i want to go in twrp, it start loading with writting "enterring recovery", and finaly my M8 reboot and restart the phone. So, i can't access to my recovery in order to root it and flash custom.
If someone can help me it's cool.
Erratum : I flash Twrp 7.0.2.0 and it's working
What version of bootloader are you using, e.g. 3.16.0000?
TWRP 2.7; here, first turn your phone on fastboot mode,
in terminal/cmd type in:
fastboot erase cache
then flash this recovery: (GSM ONLY, NOT CDMA)
http://www.mediafire.com/download/6dtgx3w3kpid1ce/openrecovery-twrp-2.8.5.0-m8_3.img
(That's the official TWRP recovery, turns out that TWRPS site is kinda slow...)
let me know how it turns out.
i4GS said:
TWRP 2.7; here, first turn your phone on fastboot mode,
in terminal/cmd type in:
fastboot erase cache
then flash this recovery: (GSM ONLY, NOT CDMA)
http://www.mediafire.com/download/6dtgx3w3kpid1ce/openrecovery-twrp-2.8.5.0-m8_3.img
(That's the official TWRP recovery, turns out that TWRPS site is kinda slow...)
let me know how it turns out.
Click to expand...
Click to collapse
The OP has already flash TWRP using the right commands, but if they're using an old version on a new HBOOT (or new version on old HBOOT) it might not load, hence me asking what bootloader they're using
Hello,
I hope this is the right section for this post.
I've been using a Note 8 Pro with zero issues until one week ago when I accidentally dropped the phone in the water.
After a few seconds submerged the display turned off and I felt an intense heat coming from the zone of the battery.
Having no chance to recover the phone (tried with Isopropyl Alcohol too) I decided to open it and manually dry/clean each component, having seen the situation inside gave me the phone is dead but I still want to recover some pictures/data from it.
Before opening the open Minitool was not detecting any device on my Windows Laptop, after cleaning each component Minitool is instead detecting the phone via USB, but I still can't extract any data because the "Usb debugging" option is not tuned on (and no the device is not rooted).
Is there any option to extract data from the phone? There's a way to turn on USB Debugging via ADB on a non-rooted phone?
Thanks,
Andrea.
how about trying your luck with a service ? most of the time they do have access to special programs, which have a better functionality than adb.
Thanks for the hint, but I am not happy with the idea of someone playing with my data
1. Try reboot phone to recovery
2. Connect it to your computer (download Platform-tools)
3. In the folder with Platform-tools open cmd
4. In cmd - adb shell
5. cd storage/emulated/0
6. ls
7. Now, using the commands, drag files from your phone to your PC
Thanks for your hint.
No luck so far, I think because the phone is not in recovery mode.
I can hear the phone starting up several times (hear the jingle) so I think it's in a reboot loop and I don't know how to boot it into recovery mode wo a working display (tried with power/volume up combination with no luck).
From the windows taskbar I can see that the phone is recognized for a few seconds before it restarts.
EDIT: trying to switch the phone on with the combination "power/volume down" brings to a kind of stable state and I can now see the phone in the windows taskbar recognized as a generic "android device". Still no luck when trying to access the phone as there's no device in windows and no device obtained through "adb devices" command.
EDIT1: I think that the phone is in "FASTBOOT" mode. If I type "fastboot devices" I can see it detected but still can't access it.
Any idea? Should I give up?
If it's popping up and down you need something to keep track.
You can try my UsbLog.exe (in the sig), it just sits there and shows what devices appear (if they have a driver) and disappear.
Try these to see if anything is working:
Code:
C:\>fastboot devices
C:\>fastboot getvar all
C:\>fastboot oem device-info
Yes it's popping up and down when it's booted in recovery mode whilst is stably connected when in fastboot mode but in this case I can't access the internal memory of the device.
I didn't get the purpose of logging the devices connecting to the USB as I can see the device connected for a while and correctly recognized as Redmi Note 8 pro but as it keeps popping out windows have no time to show it's folder.
As for the code you wrote: i will try asap but already tried with "fastboot devices" and I get the phone correctly listed but still can't access its memory as told.
Renate said:
If it's popping up and down you need something to keep track.
You can try my UsbLog.exe (in the sig), it just sits there and shows what devices appear (if they have a driver) and disappear.
Try these to see if anything is working:
Code:
C:\>fastboot devices
C:\>fastboot getvar all
C:\>fastboot oem device-info
Click to expand...
Click to collapse
After rebooting the phone in fastboot mode I can see it recognized as a generic android device from windows (still can't access the storage folder of the device).
fastboot devices----> I get the device listed with a series of numbers/letters
fastboot getvar all---> I get a list of information on token/token version/partition type and size/baseband/bootloader etc.
fastboot oem device-info----> FAILED (remote: unknown command)
So I think it's clear that the device is in Fastboot mode and instead is in a boot loop when started in revocery mode.
Is there a way to extract data from fastboot mode?
Thanks,
Andrea.
If you put a custom recovery on it in the first place you can try reflashing recovery from fastboot.
Fastboot doesn't allow you to read anything.
oem device-info is obviously an oem command that might not be on any device.
You've got a Mediatek processor. That has some low level equivalent to Qualcomm EDL, but I have no experience with that.
If you can get there you can download the user data partition, but it's probably encrypted. Also no experience with that.
The easiest is if you can get the system to mount/decrypt the partition.
You've tried the normal system too?
Is this A/B? Have you tried changing slots?
How much time does it stay up in recovery? Do you have ADB? Maybe try:
Code:
# stop recovery
Does that prevent it from looping?
So I should try to flash a custom recovery like TWRP for example?
What you mean with "normal system too"?
Changing slots you mean changing usb port?
It stays in recovery less than one second so I can't give any command via ADB.
EDIT: cant' flash any custom recovery because the bootloader is locked.
If I Try to unlock the bootloader via MiUnlock I get a warning saying that all data will be erased.
Any idea on how to unlock the bootloader wo wiping all the data?
Sephiroth79 said:
So I should try to flash a custom recovery like TWRP for example?
What you mean with "normal system too"?
Changing slots you mean changing usb port?
It stays in recovery less than one second so I can't give any command via ADB.
EDIT: cant' flash any custom recovery because the bootloader is locked.
If I Try to unlock the bootloader via MiUnlock I get a warning saying that all data will be erased.
Any idea on how to unlock the bootloader wo wiping all the data?
Click to expand...
Click to collapse
There is a mediatek bootloader unlocked you just have to boot in Brom mode and it'll unlock it please follow this
PS: press all buttons
MysticNoOb said:
There is a mediatek bootloader unlocked you just have to boot in Brom mode and it'll unlock it please follow this
PS: press all buttons
Click to expand...
Click to collapse
My bootloader is unlocked!
Thank you very much.
Now I am going to try to flash a custom recovery mode via fastboot in order to access the internal memory of the phone.
EDIT: I've just flashed twrp-3.6.2_9-0-begonia.img but still can't boot into recovery mode.
Any hint on how to extract data from the system now?
You really want to boot the normal system because that's the best way to get decrypted data.
I realized that you don't have ADB enabled there.
You should look at B. Kerler's https://github.com/bkerler/mtkclient/
If you can pull the boot image off your device then I might be able to fix it so that you have ADB.
You'd have to flash it back in fastboot or mtkclient.
You can also pull a copy of userdata off the device with mtkclient.
As far as booting into recovery, there's a way.
Here's how, if you don't have A/B (that is you flashed TWRP into recovery and not recovery_a or recovery_b)
then you can fastboot flash a special file into the misc partition and it wil boot into recovery next reboot.
To return things to normal you have to flash the empty file to the misc partition.
Code:
C:\>fastboot flash misc misc-rec.img
C:\>fastboot reboot
Only do this if you don't have partitions that end in _a or _b
I really don't know if I have partitions A and B as you mentioned and I think there's no way to check actually.
I confirm I don't have "USB Debugging" active on the phone.
So if I understand correctly I should do the following:
- Flash misc-reg.img via Fastboot
- Boot into recovery just rebooting the system after flashing the above file;
- use MTKclient to dump userdata or boot image to enable ADB on (I will need help with mtkclient I suppose).
Is it correct?
EDIT: flashed TWRP first and misc-rec then rebooted via Fastboot/Reboot but nothing happens.
Sephiroth79 said:
My bootloader is unlocked!
Thank you very much.
Now I am going to try to flash a custom recovery mode via fastboot in order to access the internal memory of the phone.
EDIT: I've just flashed twrp-3.6.2_9-0-begonia.img but still can't boot into recovery mode.
Any hint on how to extract data from the system now?
Click to expand...
Click to collapse
TWRP cant boot because you used wrong one. Search again in that unlock bootloader channel and use suitable one.
Kirasu2080 said:
TWRP cant boot because you used wrong one. Search again in that unlock bootloader channel and use suitable one.
Click to expand...
Click to collapse
Hmmm, I am almost sure that the TWRP I've flashed was listed under Redmi Note 8 pro page. Can you please indicate more precisely where should I sera
EDIT: I think I've downloaded and flashed the correct TWRP file.
@Renate can you please detail your method so I can try to extract data from the phone?
Sephiroth79 said:
Hmmm, I am almost sure that the TWRP I've flashed was listed under Redmi Note 8 pro page. Can you please indicate more precisely where should I sera
EDIT: I think I've downloaded and flashed the correct TWRP file.
@Renate can you please detail your method so I can try to extract data from the phone?
Click to expand...
Click to collapse
1/Yeah it's official. You "flashed correct TWRP." Downgrade to Miui Android 9 (_9 in it's name) to boot into that TWRP and lose your data.
2/In unlock bootloader video above, search other video in his channel playlist and find TWRP video suitable for your Miui version.
Kirasu2080 said:
1/Yeah it's official. You "flashed correct TWRP." Downgrade to Miui Android 9 (_9 in it's name) to boot into that TWRP and lose your data.
2/In unlock bootloader video above, search other video in his channel playlist and find TWRP video suitable for your Miui version.
Click to expand...
Click to collapse
Can't find the right video, can you kindly send me a link (I am on the latest Miui version and I am in Europe)?
In all the videos I've seen on his page he is using the device to install TWRP etc.
I think I just need the correct TWRP version for my MIUI release and then I'll flash TWRP and misc-reg.img. Is it right?
Sephiroth79 said:
Can't find the right video, can you kindly send me a link (I am on the latest Miui version and I am in Europe)?
In all the videos I've seen on his page he is using the device to install TWRP etc.
I think I just need the correct TWRP version for my MIUI release and then I'll flash TWRP and misc-reg.img. Is it right?
Click to expand...
Click to collapse
Use brp 3.5.2 v3.1 or V3.6 to decrypt Miui 12.5