Does anyone know how to get into diag mode?????
Dialer codes do not work... (##3282#)
Just tried it and it worked for me on zvc rooted stock
Sent from my LG-LS980 using XDA Premium 4 mobile app
it doesnt.work for me
It asks for an SPC, I'm on ZVC stock
Related
Can it be done?
Sent from my SCH-I110 using xda app-developers app
bthorne79 said:
Can it be done?
Sent from my SCH-I110 using xda app-developers app
Click to expand...
Click to collapse
Not from ODIN but from QPST
UPdownLoAD said:
Not from ODIN but from QPST
Click to expand...
Click to collapse
Qpst won't do a phone with no prl and service radio off can't get radio to turn on just figured maybe someone figured out how
Sent from my SCH-I110 using xda app-developers app
bthorne79 said:
Qpst won't do a phone with no prl and service radio off can't get radio to turn on just figured maybe someone figured out how
Sent from my SCH-I110 using xda app-developers app
Click to expand...
Click to collapse
Option 1: type ##8778# and connect to PC to flash PRL with QPST
Option 2:
WARNING: FOLLOWING THESE INSTRUCTIONS WILL WIPE EVERYTHING FROM YOUR EPIC (but should fix it)
-Pull the phone's battery and put it back in.
-slide out the keyboard and hold 1 while holding the power button
-it should now be in download mode.
Hook it up to ODIN and flash a stock rom/tar. That will have a PRL included in it (not the most current) and will flash it.
Tried that but the phone has no prl and the radio is off and qpst shows no phone on the com port it is a deactivated phone with a bad esn so I was going to get it ready for a cricket flash but the phone has been restored back to stock and wiped clean like never been activated so EVERYTHING is gone except for the min and meid. No prl no, service radio off mobile data disconnected, and the msl has been changed to 000000. I have done Odin to stock fc09 and tried everything but got in touch with sprint. If cricket actives it should it turn on the service radio so I can get a prl back on phone or is the phone screwed.
Sent from my SCH-I110 using xda app-developers app
bthorne79 said:
Tried that but the phone has no prl and the radio is off and qpst shows no phone on the com port it is a deactivated phone with a bad esn so I was going to get it ready for a cricket flash but the phone has been restored back to stock and wiped clean like never been activated so EVERYTHING is gone except for the min and meid. No prl no, service radio off mobile data disconnected, and the msl has been changed to 000000. I have done Odin to stock fc09 and tried everything but got in touch with sprint. If cricket actives it should it turn on the service radio so I can get a prl back on phone or is the phone screwed.
Sent from my SCH-I110 using xda app-developers app
Click to expand...
Click to collapse
Try odin with fc09 again, but this time check efs clear...
I thought the prl was hard written in the phone not in any rom or stock software What does Efs do
Sent from my SCH-I110 using xda app-developers app
flastnoles11 said:
Try odin with fc09 again, but this time check efs clear...
Click to expand...
Click to collapse
Thank you thank you and one more thank you
Sent from my SCH-I110 using xda app-developers app
bthorne79 said:
I thought the prl was hard written in the phone not in any rom or stock software What does Efs do
Sent from my SCH-I110 using xda app-developers app
Click to expand...
Click to collapse
Sorry didn't get back to you... glad it worked out that way, wasn't sure it would, but knew it was worth a shot...
bthorne79 said:
Thank you thank you and one more thank you
Sent from my SCH-I110 using xda app-developers app
Click to expand...
Click to collapse
It wipe everything back to hands free but a prl and service state radio is back now I have a Samsung illusion on Verizon(crap) is there a way I can swap stuff out to use the epic on Verizon like they do for straight talk
Sent from my SCH-I110 using xda app-developers app
I used mobile Odin to go from 4.0.4 to 4.1.2. Now I lost 3g and cannot update profile through dfs. The 16 digit password does not work on 4.1.2. I downgraded back and it still won't accept the default password. Any help? What rom and modem to Odin to?
##Im going to try and Odin to gb (el29) and see if that brings it back.
Sent from my SPH-L710 using xda app-developers app
ronyoung08 said:
I used mobile Odin to go from 4.0.4 to 4.1.2. Now I lost 3g and cannot update profile through dfs. The 16 digit password does not work on 4.1.2. I downgraded back and it still won't accept the default password. Any help? What rom and modem to Odin to?
##Im going to try and Odin to gb (el29) and see if that brings it back.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Are you on a S3 SPH-L710? or on an E4GT SPH-D710?
Most likely you're on an ICS modem and not an JB modem.
Just flash a JB modem in odin and update profile and PRL afterwards. You should be good after that.
I have E4GT that is flashed to vzw prepaid but I'm on my s3. I can't use update profile because it's a sprint phone flashed on Verizon. Which modem would bring my 3g back? A specific one?
Sent from my SPH-L710 using xda app-developers app
ronyoung08 said:
I have E4GT that is flashed to vzw prepaid but I'm on my s3. I can't use update profile because it's a sprint phone flashed on Verizon. Which modem would bring my 3g back? A specific one?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
A JB modem (FK23-GB27) But NOT FL24. But I'm not sure if that will mess with being flashed to Vzw.
If I odin back to gb can I use a gb modem? (el29) also does this version work with dfs to your knowledge
Sent from my SPH-L710 using xda app-developers app
If you one click (pc Odin) it will give you rom, modem and stock recovery.
Any one click; el29 to gb27 is the entire schebang
Sent from my SPH-D710 using xda premium
But will they all connect to dfs?
Sent from my SPH-L710 using xda app-developers app
I need some serious help flashing roms. Right now I'm on a stock rooted with clockwork recovery mod that I got from freegee. I edited the official cyanogenmod by removing the 4 lines but that didn't work. I tried both twrp and cwm when it came to flashing with no luck. I'm unable return to stock because the pc tool won't recognize my phone when it's in software mode. Any help with this issue would be greatly appreciated. Thanks!
Sent from my LG-E980 using xda app-developers app
Make sure you have USB debugging checked in developer option.
Sent from my LG-E980 using XDA Premium 4 mobile app
I believe I accidentally flashed the E988 baseband on my e980 (AT&T) LG Pro....Now I can't get a data or voice signal. I tried flashing the e980 but I'm still unable to get any signal what's so ever. All the return to stock guides seem to not work for me as well... Plz help...
Sent from my LG-E988 using xda app-developers app
Try this!
In cwm "format /firmware" then flash E980 modem. This must fix your problem.
Didn't work.... Thx for the help though
Sent from my LG-E988 using xda app-developers app
Can someone please confirm for me, that is running the ZVC 4.4.2 update, that the ##DIAG# dialer code still works? Just want to make sure that I will be able to access this menu before I upgrade so that I will be able to Flash my phone to a prepaid carrier.
I am stock, unrooted on KitKat ZVC and the diag dialer code does work. Here is a pic below. I have it disabled of course but you'd have to enabled it for the options to show.
Sent from my LG-LS980 using XDA Premium 4 mobile app