Related
after used "Vogue_unlocker_MFG_2.31",i can't open my phone now
i take the spl-2.31 ,and t changed the RUU_signed.nbh to VOGUIMG.nbh ,copy it to my TF ,
but after several second ,my 6900 can't open and i also can't load bootlooder mode
\
who can help me ?
yyqk2007321 said:
after used "Vogue_unlocker_MFG_2.31",i can't open my phone now
i take the spl-2.31 ,and t changed the RUU_signed.nbh to VOGUIMG.nbh ,copy it to my TF ,
but after several second ,my 6900 can't open and i also can't load bootlooder mode
\
who can help me ?
Click to expand...
Click to collapse
i take it you followed this tutorial to the letter and posted at ppcgeeks for help?
http://forum.ppcgeeks.com/showthread.php?t=24979
and give us some details!
mines bricked too but i followed the instructions on this site now i'm bricked ,man i wish i would had that link earlier.
bigpearl said:
mines bricked too but i followed the instructions on this site now i'm bricked ,man i wish i would had that link earlier.
Click to expand...
Click to collapse
what exactly do you mean bricked? details
can you still enter the bootloader? and if so, what are the numbers shown there?
it wont even boot ,but when you plug in usb it has a red light where the speaker is
bigpearl said:
it wont even boot ,but when you plug in usb it has a red light where the speaker is
Click to expand...
Click to collapse
Check this post on the PPCGeeks Forum. You will need your original 512 SD card that came with the phone and a card reader for your computer. I bricked my phone trying to upgrade the 3.xxx ROMs and that post fixed everything.
my phone wont boot at all.
bigpearl said:
my phone wont boot at all.
Click to expand...
Click to collapse
So you ARE saying you can't even enter bootloader mode?
POWER+CAMERA+SOFT RESET
bigpearl said:
my phone wont boot at all.
Click to expand...
Click to collapse
ya like champ said, we really just need to know if you can enter the bootloader right now. if you dont understand what we mean, let us know. we need more details.
jim256 said:
ya like champ said, we really just need to know if you can enter the bootloader right now. if you dont understand what we mean, let us know. we need more details.
Click to expand...
Click to collapse
LOL! I guess we'll never know, he hasn't responded, already been two days! I can't go more than a few hours without my Touch fully up and running !
TheChampJT said:
LOL! I guess we'll never know, he hasn't responded, already been two days! I can't go more than a few hours without my Touch fully up and running !
Click to expand...
Click to collapse
lol ya, know where you're coming from there!
nope no boot at all,only signs of life i get i when i put the usb charger in and a red light comes on in the speaker,sorry for the delay.
bigpearl said:
nope no boot at all,only signs of life i get i when i put the usb charger in and a red light comes on in the speaker,sorry for the delay.
Click to expand...
Click to collapse
I bricked my phone when upgrading the to the new radio and I COULD NOT boot. The link I posted showed how to boot directly into the Bootloader with a SD card formatted to Fat32, so that I could then re-run the Coke's SPL.
Again I couldn't boot. I didn't get anything on the screen, only the LED stuck on RED.
Yeah, I had that too. Fortunately, I had a warranty and was able to get a free replacement, but it was very annoying
bigpearl said:
nope no boot at all,only signs of life i get i when i put the usb charger in and a red light comes on in the speaker,sorry for the delay.
Click to expand...
Click to collapse
have you tried giving jack's tip a shot? i have heard of/seen that work for a lot of ppl. im not sure if it requires the original 512mb card, but i suppose it couldnt hurt. just ensure its formatted fat32!
let us know what happens.
im about to try it jack ,wish me luck
i tried it still cant get the phone to do anything,
bigpearl said:
i tried it still cant get the phone to do anything,
Click to expand...
Click to collapse
try asking imcokeman.
so when the phone is just sitting there, and you poke the reset hole, what happens?
also, what happens when you try the power camera reset? when you HOLD the power button, the camera button, then poke the reset hole and you dont let go till something comes up??
yyqk2007321 said:
i take the spl-2.31 ,and t changed the RUU_signed.nbh to VOGUIMG.nbh ,copy it to my TF
Click to expand...
Click to collapse
Uhhhh.....I just read over the first post to remember the situation, and found this bit in your orignal post, correct me if I'm wrong, I hope you know jim, but I don't think you were supposed to change the .nbh file at all.
this picture is how my phone looks ,this is all it that it does.
Hej,
Hopefully you all are fine and good in health...............
Now come to the point actually i had problem with my HTC Desie that was stuck up with its initial screen i mean when i turn on my phone it shows the htc logo then stuck up. Then i tried many times to hard reset but it could not work either, after that i download ROM "RUU_Bravo_Froyo_HTC_WWE_2.29.405.2_Radio_32.49.00 .32U_5.11.05.27_release_151783_signed.exe" and run from my pc (running windows 7) but after 65 % i got error during updating process and the utility shows how to recover it then according to the instructoins what i did is
1. Unplug my phone (dissconnect from pc)
2. Remove battery for 3 sec and plug it again.
3. Turn on the phone
4. Plug the USB (connect phone again)
but on the 3rd step when i plugged the battery it won't turn on neither charge or in short totally dead nothing happened to it .
I am requesting to all of you please please please suggest me what to do now, how can it work, how to turn it on again ............ is it bricked ??? if bricked then how to solve this problem ????.
Waiting for your responses......
Thanks in advance.
Be more specific.
- Can you still acces your recovery?
- If not, do you have a carrier specific rom? If so, download that rom, go into the bootloader, choose fastboot and run the rom. You can try this method also if you don't have a carrier specific rom.
Look here for a rom.
http://www.shipped-roms.com/index.php?category=android&model=Bravo
Lennyz1988 said:
Be more specific.
- Can you still acces your recovery?
- If not, do you have a carrier specific rom? If so, download that rom, go into the bootloader, choose fastboot and run the rom. You can try this method also if you don't have a carrier specific rom.
Look here for a rom.
http://www.shipped-roms.com/index.php?category=android&model=Bravo
Click to expand...
Click to collapse
no i don't have any access to recovery, because phone is not turn on how can i run this rom when phone is not connected or not power on........
by the way thanks for your suggestion.....
Hej,
After long discussion with HTC customer service and trying to convince them that the phone is not in water or in any wet place but they said that they found my phone or take my phone as liquid damage so my phone is out of warranty .
As they said that it has symptoms of liquid damage which turn white color of sticker into red/pink color. I even don't no how come but any how leave this.
Come to point, what can i do now my phone won't start i opened it disassemble then assemble everything but it won't power on even not charge ............
i am still stuck up with it even no idea what to do more
Need some suggestions can i order its flex cable or board or other stuff or what to do ??? how to power it on ???
Waiting for your response.
Thanks in advance.
arif01 said:
As they said that it has symptoms of liquid damage which turn white color of sticker into red/pink color. I even don't no how come but any how leave this.
Click to expand...
Click to collapse
Sorry, no idea for your original problem, but some small explanation where your so called water damage may come from. A friend of mine once had the same problem with a camera. The stickers can change color because of air-moisture. Especially if you carry the phone in your pocket and it is hot, your sweat leads to damp air in you pocket and affects those stickers.
I would try to argue with the htc support that it is not ok that keeping your cell phone in your pocket leads to a water damage. Perhaps they give in.
I wish you good luck with your phone.
mblaster
€: Here some link to back up my argumentation: http://www.wisegeek.com/what-is-a-water-damage-sticker.htm
You could try this...
arif01 said:
no i don't have any access to recovery, because phone is not turn on how can i run this rom when phone is not connected or not power on........
by the way thanks for your suggestion.....
Click to expand...
Click to collapse
You're problem sounds pretty similar to mine that I managed to solve. See my thread... http://forum.xda-developers.com/showthread.php?t=927702 (post #5).
Hope this helps.
Rich
babblerx said:
You're problem sounds pretty similar to mine that I managed to solve. See my thread... http://forum.xda-developers.com/showthread.php?t=927702 (post #5).
Hope this helps.
Rich
Click to expand...
Click to collapse
Thanks bro but the problem is my phone is not turn on , no power , no usb detection. Today i installed skd and used adb shell command but it says device not found what can i do more i dont understand
Please suggest me my friends.
Thanks in advance.
Hey Geeks,
I need some help and I bet that you could help me!
I ve used the search engine to not post anything someone did before. But there was nothing that could help me.
First I ll describe you what I ve done to brick my Desire HD:
My phone is rooted, S-OFF, ENG S-OFF with CM 7. After installing the new ROM I wasn`t able to install anything from the amrket. So I ve looked up for the reason and tried different things to sovle it. I ve read somewhere that it could help to add a partition to my SD-card. So I ve used the ROM Manager to format my sd card and create a partition.
ROM Manager asked me if I am sure bla bla... you know what I mean. After giving ROM Manager su-permission my phone shuts down. From there on nothing happened. (and still no patition on my sd card).
It`s not reacting to the power button, to the volume-down + power button nor is blinking my LED when I connect it to the USB-Port. Seems like it`s out of energy (but my akku was charged before I ve stzarted with the partition of my sd card).
I ve tried to put out the akku for several minutes. No reaction.
Removing SD-Card before pushing the power button: No reaction
Plug in to charge battery without hitting any button... some hours later: still no reaction
Formating SD-Card: No reaction
Then I ve tried to install the RUU 1.32., saved it on my sd-card, plugged phone in to start... my pc is not detecting my phone.
And now I am helpless
So it doesn't boot at all? Because if it doesn't, you are pretty much screwed...no boot -> no access -> no fix, but I don't believe that you can screw your phone up that badly by partitioning your sd-card.
Unless someone has a fix for this (and the problem doesn't solve itself somehow), your best bet is to send your phone to HTC for a repair, they probably won't charge you anything if it is still covered under warranty, since they can't really check for any modifications if it doesn't boot. It is probably a hardware problem any way.
frosty_ice said:
So it doesn't boot at all?
Click to expand...
Click to collapse
Nope, nothing happened.
frosty_ice said:
it is still covered under warranty, since they can't really check for any modifications if it doesn't boot. It is probably a hardware problem any way.
Click to expand...
Click to collapse
THIS makes me happy, but I would prefer any other solution.
Sleipnir1985 said:
Nope, nothing happened.
THIS makes me happy, but I would prefer any other solution.
Click to expand...
Click to collapse
The fact that it doesn't boot at all is a good thing for send it back for warranty purpose. But if you formated your sd-card, you lost root anyway. You have to make a backup of your SD-Card before you format/partition it, and then copy everything back.
And your initial issue was maybe due to an outdated version of Gapps...
why should he loose root if he formats his sd-card? you have root even without an sd-card.
if nothing helps to get your DHD back to life, you probably have to send it to HTC. but I think it's covered by warranty since it's (probably) a hardware fault.
btw, i think i've seen a thread like this somewhere here yesterday... i'll have a look and post a link if i find something
Edit: found it! http://forum.xda-developers.com/showthread.php?t=1013582&page=2
look at page 2. there are some people with the same problem, but there is no solution yet.
But you do have CWM-Recovery on it don't you?
And if, can you get into Recovery?
Had similar Problems, once...
But my phone only showed the white HTC Logo and that was it....
What i did was the following... flashed Revory via Fasbootload from Computer...
Next, i formatted my sd card via computer and copied a new Rom.zip onto it.
In my Case, leedroid.
Next, i just flashed it and it happened to work again, luckily.
he can't even boot into the bootloader.
Flussen said:
why should he loose root if he formats his sd-card? you have root even without an sd-card.
if nothing helps to get your DHD back to life, you probably have to send it to HTC. but I think it's covered by warranty since it's (probably) a hardware fault.
btw, i think i've seen a thread like this somewhere here yesterday... i'll have a look and post a link if i find something
Edit: found it! http://forum.xda-developers.com/showthread.php?t=1013582&page=2
look at page 2. there are some people with the same problem, but there is no solution yet.
Click to expand...
Click to collapse
Hardware fault or not, rooting voids warranty. Let's hope that they can't inspect the internal memory.
Anyway, is the phone reacting to connecting to a proper charger (try to leave it plugged in for a couple of hours even if the LED doesn't light up)? The other thing you could try is to find a friend with a DHD and swap the batteries just to try if somehow you managed to kill your battery.
hi Sleipnir1985,
go back to your shop,
when did you buy it? they must take it for service, or they give you new one.
it is only best solution in this case
if you take battery out for 5! min, then plug it in and hold volume down then push power button - nothing happened, this is it, the end...
cheers/
tkolev said:
Hardware fault or not, rooting voids warranty. Let's hope that they can't inspect the internal memory.
Click to expand...
Click to collapse
yes, but HTC replaces your phone if it's a hardware and not a software fault. a friend of mine got his DHD replaced with eng hboot, radio S-OFF, custom rom and so on. and lots of people here on XDA also.
Here`s another mate with the same problem.
I am going to give my HTC to the shop this evening. Push your thumbs that I ll get a new one
here is an other brick htc hd g10
cause by rom mananger.
hzjinjie said:
cause by rom mananger.
Click to expand...
Click to collapse
That was a bug with an older version of ClockWorkMod Recovery - http://forum.xda-developers.com/showthread.php?t=1043160 and has now been fixed.
Hi all,
My DHD is bricked (I think).
When I try to access to the recovery the phone vibrate 3 times and nothing on the screen
When I send : "adb devices" it replies HT0xxxxxxxxxxx recovery.
The HBOOT driver is installed and in the peripheral manager my DHD appears : android USB devices
What can I do ??
Help me please and sorry for my bad English !!
Welcome to XDA.
Please start a new thread on this issue.
this Problem same my DHD i'dont know my DHD die or not .
If You repair your DHD ok pls share with me.
I'm live in Viet nam.
Thanks.
datcvn said:
this Problem same my DHD i'dont know my DHD die or not .
If You repair your DHD ok pls share with me.
I'm live in Viet nam.
Thanks.
Click to expand...
Click to collapse
Same problem here. It is out of warranty date.
I am a Vietnamese too.
Help meee. Htc desire hd ace
my phone is brickeo anyone know what I can do? No power or bootloader or CWM.
I was root, but returned to its factory version of AT & T gingerbread rom. I did not like and wanted to go back to being root but not knowing how I Birck the cell. I need a solution please
germancalvobolivar said:
my phone is brickeo anyone know what I can do? No power or bootloader or CWM.
I was root, but returned to its factory version of AT & T gingerbread rom. I did not like and wanted to go back to being root but not knowing how I Birck the cell. I need a solution please
Click to expand...
Click to collapse
Please tell me that you did not factory reset via bootloader
Sent from my ATRIX HD using Tapatalk
Help meee. Htc desire hd ace, htc inspire 4g at&t
marknoll said:
Please tell me that you did not factory reset via bootloader
Sent from my ATRIX HD using Tapatalk
Click to expand...
Click to collapse
Thank you. I did as he told me the official website of HTC, step by step. When I finished the phone worked well, but then I got bored of gingerbread quiser again become root, and that's when my phone brick. Now not light, it does not go bootloader fastboot, CWM, nothing. Only if I turn volume + volume - and power, virbra 7 times and LED lights green battery and nothing more. It does nothing, it is a brick
htc. com/ us/ support/ htc-inspire-4g -att/ news/
RUU_Ace_Sense30_S_Cingular_US_3.20.502.63_Radio_ 12.69c.60.29U_26.09.13.17_M_release_ 335423_ signed.exe
Ok guys, I definitively need your help now.
This morning I woke up, i toke my phone (already on) and I saw that keyboard didn't work anymore, so I rebooted it and appeared the white screen with HTC LOGO, then three or four vibrations and BUM... FREEZED.
The phone is rooted, with custom rom. S-OFF.
The problem is that i can't enter into RECOVERY of the phone anymore, but I can still enter into BOOTLOADER. I tried to do a FACTORY RESET, but doesn't work (the display show again the htc logo with some vibrations before the freeze).
There is some way to format/repair with the help of PC ? Like when i changed my RADIO some weeks ago... or.. I don't know.
Thanks.
DjMatrix619 said:
Ok guys, I definitively need your help now.
This morning I woke up, i toke my phone (already on) and I saw that keyboard didn't work anymore, so I rebooted it and appeared the white screen with HTC LOGO, then three or four vibrations and BUM... FREEZED.
The phone is rooted, with custom rom. S-OFF.
The problem is that i can't enter into RECOVERY of the phone anymore, but I can still enter into BOOTLOADER. I tried to do a FACTORY RESET, but doesn't work (the display show again the htc logo with some vibrations before the freeze).
There is some way to format/repair with the help of PC ? Like when i changed my RADIO some weeks ago... or.. I don't know.
Thanks.
Click to expand...
Click to collapse
That sounds like a fried motherboard. Try flashing a RUU from fastboot usb. If after the flashing the phone keeps not booting, then your motherboard needs to be replaced.
If you need help with the flashing read the guide in my signature to find out how to perform that stuff. :victory:
glevitan said:
That sounds like a fried motherboard. Try flashing a RUU from fastboot usb. If after the flashing the phone keeps not booting, then your motherboard needs to be replaced.
If you need help with the flashing read the guide in my signature to find out how to perform that stuff. :victory:
Click to expand...
Click to collapse
Sorry what guide i need to follow, and where I can find this "RUU" for my phone? Thanks ^^
DjMatrix619 said:
Sorry what guide i need to follow, and where I can find this "RUU" for my phone? Thanks ^^
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=30020025&postcount=7
glevitan said:
http://forum.xda-developers.com/showpost.php?p=30020025&postcount=7
Click to expand...
Click to collapse
Ok, installed RUU in my phone, but it's still vibrating 7 times. No other chances I suppose... right?
DjMatrix619 said:
Ok, installed RUU in my phone, but it's still vibrating 7 times. No other chances I suppose... right?
Click to expand...
Click to collapse
Check or volume rocker/keys. On the mytouch 4g, when u press volume up and power key while phone is off, it vibrates and the notification light blinks red. So maybe or volume up key is stuck.
Sent from my Desire HD using xda app-developers app
Hi all , I've bricked this device about a month ago , I've been searching for unbrick method , I can say i searched the entire internet i was unnable to find any unbrick methods , nor new mainboard , I even conntacted huawei in the us , and they told me to buy new motherboard in alibaba.com there's no motherboard there to , I was supprised they to have no mainboards nor support for unbricking the device ,
so my question , Does anywan know how to do it, or where can i pursache a new motherboard.
You kind of need to explain the symptoms before the doctor can do anything, same thing applies here.
Explain what is happening on your device, No response / stuck on boot animation, will it go to Recovery etc.
Also what have you tried to unbrick. Give us some info otherwise we can't help.
I haven't seen any P6 Mobos for sale on Ebay and such, I wouldn't know about that.
Explain here... You'll get your phone unbricked. Never say die
Sent from my P6-U00 using XDA Premium HD app
PulseDroid said:
You kind of need to explain the symptoms before the doctor can do anything, same thing applies here.
Explain what is happening on your device, No response / stuck on boot animation, will it go to Recovery etc.
Also what have you tried to unbrick. Give us some info otherwise we can't help.
I haven't seen any P6 Mobos for sale on Ebay and such, I wouldn't know about that.
Click to expand...
Click to collapse
Well , I was trying to flash the CleanRom project , I'have made a post about that to ,
The Instructions were wery clear to me i followed them exactly how it was writen in tutorial.
I have an international verzion of P6 and according to that turorial , ( http://forum.xda-developers.com/showthread.php?t=2625680 )
in order to flash that room i moust firstly flash an Chineze verzion which comes with unlocked bootloader , then i did that
I downloaded the rom put it on phone flashed via setteings update software , then everything went fine the process it seelf showd me
completed 100% and in the end sayd OK , then my phone turned off, and it's never been on eversince :A
As of now the phone is totally dead black screen , I've tryed everything it doesent go in any mode
When i plug in the power cord it only shows a red light indicator.
I belive this is a Hard Brick , not soft brick .
Warranty? Did the same to mine got I repared for free...
jagwar1 said:
Warranty? Did the same to mine got I repared for free...
Click to expand...
Click to collapse
nope , no warranty
Nexhmedin said:
nope , no warranty
Click to expand...
Click to collapse
Did you tell them that you have bricked your P6? Just tell them you haven't done anything and you're a total noob.
rupro327 said:
Did you tell them that you have bricked your P6? Just tell them you haven't done anything and you're a total noob.
Click to expand...
Click to collapse
Yes i did brick my P6 and nope I aint gona tell them Im a noob :A
The thing here is to get help in here is not about send it back to china so if you have any other idea , your welcome to share.
I have no warranty , even if it had this phone is buyed in china , and traveled to the otherside of the world :it would cost as mouch as the phone itseelf to send it back to service.
Try flashing the latest TWRP, it has off mode charging. Can you put your phone in fastboot mode via adb ?
Not Hard Brick!
Happened to me before and guess what? Tried very simple thing - and it worked.
Take your sdCard out of the phone.
Replace the dload folder with the extraction from either the B111 from the Huawei site or the B125 from here on xda
Reinsert card and press all buttons down till phone goes into internal recovery.
Your main problem will be having enough battery to get you twenty minutes.
If your red light is functioning, you probably haven't blown your motherboard.
Sent from my LG-D802 using XDA Premium HD app
Nexhmedin said:
Hi all , I've bricked this device about a month ago , I've been searching for unbrick method , I can say i searched the entire internet i was unnable to find any unbrick methods , nor new mainboard , I even conntacted huawei in the us , and they told me to buy new motherboard in alibaba.com there's no motherboard there to , I was supprised they to have no mainboards nor support for unbricking the device ,
so my question , Does anywan know how to do it, or where can i pursache a new motherboard.
Click to expand...
Click to collapse
you device boot an loop in huawei screen.
samuelbryan said:
you device boot an loop in huawei screen.
Click to expand...
Click to collapse
Nope my device is completly frozzen no sign of life dead screen , when I connect to pc nothing show's up I've tryed installing drivers and everything else with no success same thing nothing happen's.
Nexhmedin said:
Nope my device is completly frozzen no sign of life dead screen , when I connect to pc nothing show's up I've tryed installing drivers and everything else with no success same thing nothing happen's.
Click to expand...
Click to collapse
Only solution for that is to take your phone to local service. I am talking from experience.
Sent from my ME371MG using xda app-developers app
Can you check if you plug it into you computer that your computer connects to it or makes a sound? That can probably prove that the motherboard is fine and maybe your LCD is broken or has loose connection.
Happened to me before. Black screen, only red led, nothing else working. It happened that I got scammed by a seller.
What I ended up doing was taking apart the phone and I found that the LCD connection was loose. Fixed that, then I saw that the phone wouldn't boot. Loaded B111, B118, nothing worked. I then got B125, and it miraculously worked.
You could try what I did, but it is quite risky and I was very lucky.
I have to agree with goce. Unless you are experienced and willing to mess around with things, you should go find local service.
samuelbryan said:
you device boot an loop in huawei screen.
Click to expand...
Click to collapse
What can I do on my phone just flashes the red light and include only the logo of huawei.
My P6 is stuck on splash screen. I rooted the handset and tried to install TWRP via flashify, it installed but after reboot its just stuck on splash screen. I cannot go into recovery as well now.
gurvinder76 said:
My P6 is stuck on splash screen. I rooted the handset and tried to install TWRP via flashify, it installed but after reboot its just stuck on splash screen. I cannot go into recovery as well now.
Click to expand...
Click to collapse
I think you should download the TWRP recovery for jelly bean from surdu and flash it from bootloader. If you are on the international this is the method for unlocking bootloader:
http://forum.xda-developers.com/showthread.php?t=2666116
Flash a custom rom next
Sent from my P6-U06 using XDA Premium 4 mobile app