Related
Hi everyone!
Just wanted to ask if anyone could upload their tun.ko for the said kernel. I'm trying OpenVPN and it is one of the requirement for the program to run.
Thanks a lot in advance!
blue_algae said:
Hi everyone!
Just wanted to ask if anyone could upload their tun.ko for the said kernel. I'm trying OpenVPN and it is one of the requirement for the program to run.
Thanks a lot in advance!
Click to expand...
Click to collapse
You can't build a loadable kernel module without recompiling the kernel, hence theoretically you must also change the kernel....
I think that the stock kernel has this model built inside the kernel, so you should be able to just run OpenVPN and it should work, no need to load anything.
If this still does not work for you, look at the FlyKernel from my signature, it should solve the problem for you (if you try it and there are problems let me know on it's thread).
Thanks for the reply! I cant find tun.ko anywhere so I guess it is missing from the official rom. Im getting tired of the stock rom anyway so maybe its time to load up some custom prepared eclair or froyo.;-) i'll try cronos droid as im curious of what divx library is for. Maybe it can paly divx natively? Anyway, thanks again!
blue_algae said:
Thanks for the reply! I cant find tun.ko anywhere so I guess it is missing from the official rom. Im getting tired of the stock rom anyway so maybe its time to load up some custom prepared eclair or froyo.;-) i'll try cronos droid as im curious of what divx library is for. Maybe it can paly divx natively? Anyway, thanks again!
Click to expand...
Click to collapse
I'll try to clarify what I tried to say above: To the best of my knowledge there is no tun.ko in the official ROM. This is the way it should be. And yet openVPN will still work for you. Did you try to use OpenVPN and have some problem with it?
hey, thanks for taking time helping me out.
I was able to install openvpn. I can enable openvpn too, however, may problem is I can't use my openvpn configuration. For some reason, I can't make my openvpn configuration enabled. No error whatsoever. When I click the check mark for the configuration, it just blinks. Here's my hunch, In the tun module settings, there is this option: "path to tun module" which I dont know where to point to since the stock kernel does not have tun.ko. I downloaded a couple of tun.ko that I saw here and a couple of others I found using google. But since these are all not for the kernel that I have, it all didn't work. what do you think should I do?
blue_algae said:
hey, thanks for taking time helping me out.
I was able to install openvpn. I can enable openvpn too, however, may problem is I can't use my openvpn configuration. For some reason, I can't make my openvpn configuration enabled. No error whatsoever. When I click the check mark for the configuration, it just blinks. Here's my hunch, In the tun module settings, there is this option: "path to tun module" which I dont know where to point to since the stock kernel does not have tun.ko. I downloaded a couple of tun.ko that I saw here and a couple of others I found using google. But since these are all not for the kernel that I have, it all didn't work. what do you think should I do?
Click to expand...
Click to collapse
Ok, I was sure for some reason that openVPN should work well with the stock kernel (personally I don't use VPN so can't really check it myself).
I think your best bet now is to try a different kernel. You can try my kernel from my signature (flykernel) which should work on almost any ROM. Or if you where planning to checkout different ROMs, go for it and hopefully it will work for there.
just finished reading your kernel details and it sounds interesting! I'll give it a try now.
and yea, thanks for the help and for your kernel.
Hi
has anybody compiled cifs.ko for this device? I've googled about for it but cannot seem to find anything...
I'm running stock rom, rooted.
Thanks
Ben
Galaxy Y Duos
And for SGY Duos (S6102)?
I've googled a lot but nothing...
Stock and rooted.
we already have cifs.ko compiled for SGY. its just a little bit unfortunate that only a few of us here know about cifs.ko things. this work is a little bit unapreciated by most user here. you can find the thread here http://forum.xda-developers.com/showthread.php?t=1636181 you'll need a custom kernel/or a modified one with init.d support to properly load the module at boot. you can make a simple script in init.d to load it.
for the duos...currently we only have one developer for sgy duos. we don't have the module for that device at this moment. since the devices are quite similar you can try to load this module in your device. I'm not sure if it will work but trying it won't harm our device.
btw, you already know about cifs.ko so I assume that you're not a noob in android stuff. I'll really appreciate if you put your next question in FAQ thread.
currently I have http://forum.xda-developers.com/showthread.php?t=1888518
I was wondering how to get flash to work properly on it, I tried downloading the latest flash.apk, and installed it, but it doesn't seems like
it is working.
Thanks in advance!
Hey,
So you have an Xperia Arc yes?
If so, this could be in a device specific forum where you will get faster answers.
This is probably why you have no responses yet.
Try the "Find your Device" search bar. Then post in the Arc forums.
Back to your question
I must stress that flash is kind of abandoned by android in the latest updates. So results may not be the best.
Try this article here.
http://www.androidcentral.com/how-manually-install-flash-your-android-device
I found it useful.
Hit thanks if you found this useful.
R3PORTED - For Move
Moved for better assistance, Thank You.
I'm sorry to clarify, I have the Xperia Pro, but I would assume they're the same. and following http://www.androidcentral.com/how-ma...android-device does not work...
whenever I play a flash content it would only show a blue box with question mark on it...
BTW, I understand why Google does not support Flash anymore, but would it get replace by something else in the future? Can't imagine how android can't even support flash content anymore...
Hi Guys, I thought I would make a thread here as i can not seem to be able to find a solution. Rooted my device obviously, everything is fine until I installed a "Kernel" (cant remember author) to overclock mainly then encountered several problems. 1: Wi-Fi has become unstable. It seems to either crash my phone or signal disappears after my phone is on standby for a period of time (variable). 2: My Bluetooth just does not work. At all!! I have not done anything more to my device so the solution (hopefully). I forgot to mention that it is STOCK ROM. I do not wish to wipe my phone clean, i want to find a fix. Possibly a more stable kernel. Overclocking does not want to happen either but the "Governor's, I/O Scheduler's and Underclocking" do work. If there is anything more you guys need to know please ask!!
Looking forward to ideas
Kye
KyeWalker said:
Hi Guys, I thought I would make a thread here as i can not seem to be able to find a solution. Rooted my device obviously, everything is fine until I installed a "Kernel" (cant remember author) to overclock mainly then encountered several problems. 1: Wi-Fi has become unstable. It seems to either crash my phone or signal disappears after my phone is on standby for a period of time (variable). 2: My Bluetooth just does not work. At all!! I have not done anything more to my device so the solution (hopefully). I forgot to mention that it is STOCK ROM. I do not wish to wipe my phone clean, i want to find a fix. Possibly a more stable kernel. Overclocking does not want to happen either but the "Governor's, I/O Scheduler's and Underclocking" do work. If there is anything more you guys need to know please ask!!
Looking forward to ideas
Kye
Click to expand...
Click to collapse
It not the root that causing the issue, it the kernel that tried. If I remember correctly there's only two kernel for the S4 mini that allows overclcoking, and one of them has stopped developerment since last year. That leaves the F4k kernel.
He has two different kernels: one for the AOSP/CM (custom) ROM another is also a bit outdated for the default Samsung TouchWiz ROM. Are you sure you've download the correct kernel?
TNCS said:
It not the root that causing the issue, it the kernel that tried. If I remember correctly there's only two kernel for the S4 mini that allows overclcoking, and one of them has stopped developerment since last year. That leaves the F4k kernel.
He has two different kernels: one for the AOSP/CM (custom) ROM another is also a bit outdated for the default Samsung TouchWiz ROM. Are you sure you've download the correct kernel?
Click to expand...
Click to collapse
Well to my knowledge I had used the correct kernel....... I never used one from here but I did find a website claiming that F4k has a stock over clocking kernel...... Unfortunately for the life of me I can not find this website. I've managed to overclock with success using a apk. I found on here (performance control) brilliant tool!! Is there any chance you able to post a link to this stock kernel you talk about so I can test myself and report back? Everything else is working without a problem apart from Wi-Fi and bluetooth.
Kye
KyeWalker said:
Well to my knowledge I had used the correct kernel....... I never used one from here but I did find a website claiming that F4k has a stock over clocking kernel...... Unfortunately for the life of me I can not find this website. I've managed to overclock with success using a apk. I found on here (performance control) brilliant tool!! Is there any chance you able to post a link to this stock kernel you talk about so I can test myself and report back? Everything else is working without a problem apart from Wi-Fi and bluetooth.
Kye
Click to expand...
Click to collapse
For custom ROM - http://forum.xda-developers.com/showthread.php?t=2568479
For Samsung TW ROM - http://forum.xda-developers.com/showthread.php?t=2636890
summarise.....
TNCS said:
For custom ROM - http://forum.xda-developers.com/showthread.php?t=2568479
For Samsung TW ROM - http://forum.xda-developers.com/showthread.php?t=2636890
Click to expand...
Click to collapse
So I've come to a conclusion after many weeks of testing and searching........ Unfortunately the overclock kernel for "TouchWiz" roms is unstable........ looking through forums I can see that F4k has only realised a "test" version....... on the other hand I have found a kernel from Vikinger (if spelt correctly) that's has fixed my issue and is working great... shame it isn't overclocked nor under and has no additional governors..... any one with ideas please feel free to share..... many thanks.
Kye
Q&A for [DEV][ROM][4.4]Cyanogenmod 11[WIP][ALPHA-1]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [DEV][ROM][4.4]Cyanogenmod 11[WIP][ALPHA-1]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Camera app
After updating to RC11 I didn't have an stock camera app. If you don't,download the google camera zip from the post with all the gapps,extract it and install the apk from system\app,then it'll work
Should there be an stock camera app?
Bluetooth won't connect
Hi,
I run cm11 rc13 on my gio. I paired it with my tablet. I can send and receive files.
However, the connection won't stay. This is frustrating because I want to use my phone to smart unlock my tablet.
Is this a known bug, or am I the only one experiencing it?
I think Gio doesn't support ext4
As the title says,I can't seem to make my Gio running RC11 To make my sd-card an ext4 partition,the recovery makes it ext3 even do selected ext4. Any support? Need it for space issues
Using Cast Screen
Hi;Can any one Use Cast Screen in this rom? I Have a LG Smart TV and For use cast Screen First Should Conect to TV via WIFI Direct But This rom Hasn't WiFI Direct! Can anyone advise what should I do? (Sorry for Bad English!)
Can't get this install working - stuck on the blue CM logo after flashing..
Doing a wipe after the flashing causes the phone to hang one step earlier - with the Samsung logo.
- CWM 6.0.5.3.
- CM11 4.4.4 RC13 / RC14 (both give same problem)
- Flashed from stock ROM (A 2.3.7)
a2sd darktremor in cm11
Anyone has got a2sd darktremor working with cm11 Rom? After Installing referring steps from many installation guides, used 2.7.5.3 beta04 script with ext4(512mb) partition, when i do an a2sd check it says
Segmentation fault
Segmentation fault
/system/bin/bash: /system/bin/launcha2sd: No such file or directory found
TIA
me too!
mpc007 said:
Can't get this install working - stuck on the blue CM logo after flashing..
Doing a wipe after the flashing causes the phone to hang one step earlier - with the Samsung logo.
- CWM 6.0.5.3.
- CM11 4.4.4 RC13 / RC14 (both give same problem)
- Flashed from stock ROM (A 2.3.7)
Click to expand...
Click to collapse
I have the same issue, have you come across a fix? Also, where did you download your stock ROM from? I can't find any links that work anymore! I have found one, but its all in a language I cannot read! :S
orangejuice43 said:
I have the same issue, have you come across a fix? Also, where did you download your stock ROM from? I can't find any links that work anymore! I have found one, but its all in a language I cannot read! :S
Click to expand...
Click to collapse
are you the same guy from "Half-bricked gio" thread
anyway, here you go:
http://www.sammobile.com/firmwares/database/GT-S5660/
amazing!! yes I am and thank you very much
I can't find the latest build, I guess its RC14, because the arm6 website is down...
Does anyone have it?