So i've bricked my Nexus 5x (h791) 32gb by flashing the Nexus 5 bootloader onto it. i've been searching for a few days and managed to get phone phone to switch between "qualcomm HS-USB QDLoader 9008" and " QHSUSB_BULK"
it shows as unknown model on LGUP when i force the "LGE Android Platform USB serial port" or "LGE Mobile USB serial Port" other than that it wont show up in LGUP.
I have tested this on 2 windows machines. one being windows XP the other windows 10. i do have a pc running ubuntu which i can use but i wouldnt know where to start when using that.
Any help or advice would be much appreciated!
you find any solution? i have the same problem but i am iam in fisrt phase qualcomm 9008. i searcing 3 days but i find results only for nexus 5 not 5x . pls anyone may help us
me to , have this problem , it's been a week .
i don't know why 5x have download mode .
looking for the same solution ... Nexus 5X bricked with Qualcomm 9008 if you got anything please contact me for djbebe at g55gle
this might help
use BoardDiag
Duckscreen said:
use BoardDiag
Click to expand...
Click to collapse
Latest available BoardDiag does not support N5X..
I asked LG service, and that DONT HAVE any software for 5x, so only way is replace entire motherboard.
So, at the moment, 5x with broken GPT or boot - is not repairable... I will try to flash a full-flash in new empty EMMC, and replace chip, but so many risks.
spastikitten said:
So i've bricked my Nexus 5x (h791) 32gb by flashing the Nexus 5 bootloader onto it. i've been searching for a few days and managed to get phone phone to switch between "qualcomm HS-USB QDLoader 9008" and " QHSUSB_BULK"
it shows as unknown model on LGUP when i force the "LGE Android Platform USB serial port" or "LGE Mobile USB serial Port" other than that it wont show up in LGUP.
I have tested this on 2 windows machines. one being windows XP the other windows 10. i do have a pc running ubuntu which i can use but i wouldnt know where to start when using that.
Any help or advice would be much appreciated!
Click to expand...
Click to collapse
Have you got the phone back to life??
While flashing a new image on my 32 GB Nexus 5X yesterday, I flashed the wrong bootloader and hard-bricked my phone. It won't respond to key combos I've tried and won't even load in a Download Mode. I stumbled upon this guide and was managed to have my Windows PC detect it as a"Qualcomm HS-USB QDLoader 9008" device under "Ports" in Device Manager. I don't know how to proceed further because the guide assumes a phone can be loaded into Download Mode and mine can't so it is undetectable in LGUpdate tool.
Could anyone help me with this? Thank you.
hi, i have a verizon lgg4 and im trying to follow this thread https://forum.xda-developers.com/g4/help/lg-g4-vs986-super-hard-brick-unbrick-fw-t3666784 but i cant get working qualcom drivers all the ones i found either didnt change anything or windows says cant "verify"/" this is not a x64 driver" (even though i chose the 64 one)
if anyone has these drivers please share, i beleive i have all the other files needed.
thank you
hi, my phone hardbricked and i have only Qualcomm HS-USB QDloader 9008(Com 3) on device manager.
i will try with qfil method, but unable to find required files
is there a way to unbrick it?
and need this files.
I am trying to use the EDL methods that require qualcomm hs-usb qdloader 9008 drivers.
I had 0 luck so far to get the device show up as qualcomm hs-usb qdloader 9008.
I tried several versions of the driver install package I could find, tinkered with LG, xiaomi and others.
My device is Windows x64, 1903.
It's an UEFI device, so secure boot is enabled
Some instructions require you to disable driver signing - which doesn't work with secure boot, I disabled it...
I disabled driver signing...
I installed the certificate...
still nothing.
When booting the device shows up under "Universal Serial Bus devices" as "QUSB_BULK"... when trying to update the drivers, I get "The best drivers for your device are already installed" - Care Suite Emergency Connectivity, which is a Microsoft driver. Uninstalling that one also results in nothing really.
Are there no qdloader drivers for a current OS? Which steps do you take to get the driver working?
My phones do not even seem show up when in EDL mode a this point.
Any help is appreciated.
My first "thing" is to do is to reflash the Alcatel Idol 4s open market properly as the WDRT tool only would allow the T-Mobile firmware to be flashed.
What I eventually would want is a European language supporting firmware with a US based modem/cellular configuration.
My first step is however to be able to flash things at all.
Any guidance is appreciated.
unstall all nokia/microsoft software,driver on pc and install qcom driver again