Related
when i decide to change rom, after flashing kernel by fastboot and power on phone, I can't going to recovery by pressing volum down.
is there a command for fastboot to boot phone to recovery without pressing volum down?
Use adb i.e. adb reboot recovery
Many ways to do this...Easy wasy out,try an app like rom manager which gives u a direct recovery boot option,or u can use comand line prompts from ur PC ..or use terminal emulator..type in /system/bin/reboot recovery..
sinkster said:
Use adb i.e. adb reboot recovery
Click to expand...
Click to collapse
i connect phone in fastboot mode and use adb reboot recovery but not working! "error device not found"
Forgot, you can only be connected to adb if the phone's active or in recovery. When it's rebooting are you repeatedly pressing the buttons or holding them?
Hi, I am having a simlar issue. I flashed the Lupus kernel and after i turned of my phone, I pressed the volume down button while i turned the phone on and once it loads it just goes into safe mode. Am i doing something wrong?
EDIT: I was holding the button down. Not pressing repeatedly. All good now. Thanks.
amir143 said:
i connect phone in fastboot mode and use adb reboot recovery but not working! "error device not found"
Click to expand...
Click to collapse
flash again driver package in driver folder flashtools and select your device options
rod555 said:
flash again driver package in driver folder flashtools and select your device options
Click to expand...
Click to collapse
I do it but adb not working in fastboot mode
amir143 said:
I do it but adb not working in fastboot mode
Click to expand...
Click to collapse
try flashing CWM again ?
amir143 said:
I do it but adb not working in fastboot mode
Click to expand...
Click to collapse
your OS? Win7 x64?
Hi amir143!
You could try installing x-Parts (a free application from the market).
Good luck.
I thinks it's kernel dependent..
try pressing Vol-down OR backward button several times when the LED lights OR the phone vibrate OR the logo glow from normal after powered-on.
i have searched for the last two days on how to enter bootloader tried every combination of buttons and it never responds the phone just boots up into normal phone system and ive tried everthing also on the red triangle screen vol up down and all the other combinations do not open recovery mode please help as this should be a simple task and im not sure why it doesnt work.
fyi not rooted stock rom i did root it with srs root for android it said completed and seemd to work but root checker says it has no root please help.
many thanks
goto settings/energy and disable fast reboot
then try again
shutdown and then press vol down+power
pascuals said:
goto settings/energy and disable fast reboot
then try again
shutdown and then press vol down+power
Click to expand...
Click to collapse
hi,
thanks you for the response i should have said fast boot is unticked ive seriously searched loads and its not working im thinking it may be broke somehow but the phones works fine.
vol down is working? maybe is not making contact
pascuals said:
vol down is working? maybe is not making contact
Click to expand...
Click to collapse
yep works fine im not sure what could cause this im finking a factory reset would solve it but dont want to do it for it not too work
search your pc to find adb.exe
plug your phone with usb debugging enabled
open cmd wherever you have adb.exe
write:
adb reboot bootloader or adb reboot recovery
pascuals said:
search your pc to find adb.exe
plug your phone with usb debugging enabled
open cmd wherever you have adb.exe
write:
adb reboot bootloader or adb reboot recovery
Click to expand...
Click to collapse
ive done that it takes me to the recovery page (red triangle with excalamation mark ) but from there i press vol up and vol down ive tried em all and it justy stays on the red triangle screen no response.
what are you trying to do?
your phone is not root and you don´t have custom recovery installed
first you need to unlock your bootloader and then flash a custom recovery and make root
go here http://forum.xda-developers.com/showthread.php?t=2168500
pascuals said:
what are you trying to do?
your phone is not root and you don´t have custom recovery installed
first you need to unlock your bootloader and then flash a custom recovery and make root
go here http://forum.xda-developers.com/showthread.php?t=2168500
Click to expand...
Click to collapse
thanks you and my plan is too root sing one click root and it takes me to red triangle screen which is stock recovery main page and vol up and power should do it but doesnt it just stay on the red triangle is there something im not doing do i need to unlock the bootloader for me to gain access
My Huawei G510 is stuck at logo after rooting device. It is not unlocked from Huawei. What to do. Tried several things unable to load.
HuaweiG510 said:
My Huawei G510 is stuck at logo after rooting device. It is not unlocked from Huawei. What to do. Tried several things unable to load.
Click to expand...
Click to collapse
I think you should download firmware for your mobile and flash it.Put the firmware in sdcard/dload/update.app.Now press insert sd card and press vol+ vol- and power button.
Install firmware and also go to recovery mode and wipe cache :highfive:
Hope this works !!
Thanks dear. It worked.
hannanzikrea said:
I think you should download firmware for your mobile and flash it.Put the firmware in sdcard/dload/update.app.Now press insert sd card and press vol+ vol- and power button.
Install firmware and also go to recovery mode and wipe cache :highfive:
Hope this works !!
Click to expand...
Click to collapse
HuaweiG510 said:
Thanks dear. It worked.
Click to expand...
Click to collapse
If that worked U can press thanks :good: button
hannanzikrea said:
I think you should download firmware for your mobile and flash it.Put the firmware in sdcard/dload/update.app.Now press insert sd card and press vol+ vol- and power button.
Install firmware and also go to recovery mode and wipe cache :highfive:
Hope this works !!
Click to expand...
Click to collapse
Hi, I have the same problem and I followed your instructions but while the new firmware is installing from the sd card, the phone shut down.
It seems like it has no sufficient power to finish the operation. In fact I tried to plug the phone to charge the battery and that don't work...at least the led is not on (but I'm pretty sure it's not charging).
After that the only things I can do is to power on again and see the boot loop.
Any idea on how to solve?
Thanks.
poirot13 said:
Hi, I have the same problem and I followed your instructions but while the new firmware is installing from the sd card, the phone shut down.
It seems like it has no sufficient power to finish the operation. In fact I tried to plug the phone to charge the battery and that don't work...at least the led is not on (but I'm pretty sure it's not charging).
After that the only things I can do is to power on again and see the boot loop.
Any idea on how to solve?
Thanks.
Click to expand...
Click to collapse
Shutdown or reboots? The op said that was a G510 and this is the P6 forum
Probably you have the recovery corrupted, you need to reflash stock recovery again via fastboot
THIS IS FOR THE Ascend P6, NOT for the G510
S34Qu4K3 said:
Shutdown or reboots? The op said that was a G510 and this is the P6 forum
Probably you have the recovery corrupted, you need to reflash stock recovery again via fastboot
THIS IS FOR THE Ascend P6, NOT for the G510
Click to expand...
Click to collapse
Shutdown. Then if I press the power button or simply I plug the phone to charge the battery, start again to bootloop.
Can you please tell me how to do?
poirot13 said:
Shutdown. Then if I press the power button or simply I plug the phone to charge the battery, start again to bootloop.
Can you please tell me how to do?
Click to expand...
Click to collapse
My problem was that when into the original recovery, after a few seconds, phone reboots and back up to kernel logo
The full command for flash is: fastboot flash recovery recovery_original_flashable.img
Info:
http://forum.xda-developers.com/showthread.php?t=2131284
http://androidforums.com/desire-all...boot-windows-updated-1st-june-2011-a.html#”8”
S34Qu4K3 said:
My problem was that when into the original recovery, after a few seconds, phone reboots and back up to kernel logo
The full command for flash is: fastboot flash recovery recovery_original_flashable.img
Info:
http://forum.xda-developers.com/showthread.php?t=2131284
http://androidforums.com/desire-all...boot-windows-updated-1st-june-2011-a.html#”8”
Click to expand...
Click to collapse
It happens the same to me, but I don't know how to do.
I'm a newbie and I'm not familiar with this command...could you kindly explain what I have to do step by step?
I posted you fastboot noob-friendly tutorials
1st you need fastboot installed and P6 and fastboot drivers
Asumming you already have downloader the image and you are in windows, open a cmd promp and navigate (using cd command) to your fastboot directory, place recovery_original_flashable.img in this folder. If your phone is shutdown, hold vol- and plug the usb cable (if it's continuous rebooting, hold vol- and power button until phone reboots and kernel logo come up)
Type on the cmd promt: fastboot devices , if you see under devices attached, ??????????? or numbers and letters, your phone is connected into fastboot mode
If you don't have this, check if the drivers was correctly installed.
With the phone connected in fastboot mode, type in the cmd promt: fastboot flash recovery recovery_original_flashable.img
After this command finish, type fastboot reboot and enter into the default recovery and try to update the system
I not guarantee the exit of this operation, this solved my problem, but maybe yours not. If you aren't sure, ask here or send phone to your repair center
S34Qu4K3 said:
I posted you fastboot noob-friendly tutorials
1st you need fastboot installed and P6 and fastboot drivers
Asumming you already have downloader the image and you are in windows, open a cmd promp and navigate (using cd command) to your fastboot directory, place recovery_original_flashable.img in this folder. If your phone is shutdown, hold vol- and plug the usb cable (if it's continuous rebooting, hold vol- and power button until phone reboots and kernel logo come up)
Type on the cmd promt: fastboot devices , if you see under devices attached, ??????????? or numbers and letters, your phone is connected into fastboot mode
If you don't have this, check if the drivers was correctly installed.
With the phone connected in fastboot mode, type in the cmd promt: fastboot flash recovery recovery_original_flashable.img
After this command finish, type fastboot reboot and enter into the default recovery and try to update the system
I not guarantee the exit of this operation, this solved my problem, but maybe yours not. If you aren't sure, ask here or send phone to your repair center
Click to expand...
Click to collapse
It works!!! You are simply a genius!
Thanks a lot. :laugh:
Glad to help
Sent from my HUAWEI P6-U06 using xda app-developers app
S34Qu4K3 said:
Glad to help
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
hey man, ur posts in this thread were a real big help for me, i accidently wiped my stock recovey (dont ask ) and got stuck at the boot logo with nothing working at all and ofcourse froce updating wont work in apsence of recovery (put update.app on sdcard/dload bla bla)
so i downloaded the stock recovery you posted and flashed it via adb after i got my pc to see my device with ur combination back in post #10 (hold power and vol - buttons while plugged to pc) and everything went great
thanks for your help man, really can't thank u enough, thought my device was hardbricked
Mine doesnot work
hannanzikrea said:
I think you should download firmware for your mobile and flash it.Put the firmware in sdcard/dload/update.app.Now press insert sd card and press vol+ vol- and power button.
Install firmware and also go to recovery mode and wipe cache :highfive:
Hope this works !!
Click to expand...
Click to collapse
I am using Huawei G 510-0200 in Pakistan. I had rooted my cell phone and was converting a user app into system app via Titanium backup. The process was taking long time so force closed Titanium Backup app. This caused phone crash and it restarted and hung up at huawei logo.
Now i tried factory data reset and clearing cache in Power and Volume + key mode. It did not work. I tried applying update (two different roms, one custom pakistani rom and other was normal g510-0200 rom) in the same mode but it shows installation aborted.
I tried Forced Firmware Update mode too. I placed update.app file in the sd card and restarted cell phone by holding Volume+, Volume- and Power key. In that mode, it shows unpacking Step 1/2 for a while and then instead of installing, it shows Update Failed.
Error log shows this:
filename = /mmc1/dload/update.app call RCV_MODULE_END_EVENT failed,module = OEMSBL_VER_LIST CMD=0xf,moduleaddr = 0xd2000000, len_tmp=0x4000
I have tried everywhere and I'll be really greatful if you can sort this out for me. :crying:
hi
S34Qu4K3 said:
Shutdown or reboots? The op said that was a G510 and this is the P6 forum
Probably you have the recovery corrupted, you need to reflash stock recovery again via fastboot
THIS IS FOR THE Ascend P6, NOT for the G510
Click to expand...
Click to collapse
Good bless you. It worked also for me. Thank you very muck , thank you thank you.
No luck.
S34Qu4K3 said:
I posted you fastboot noob-friendly tutorials
1st you need fastboot installed and P6 and fastboot drivers
Asumming you already have downloader the image and you are in windows, open a cmd promp and navigate (using cd command) to your fastboot directory, place recovery_original_flashable.img in this folder. If your phone is shutdown, hold vol- and plug the usb cable (if it's continuous rebooting, hold vol- and power button until phone reboots and kernel logo come up)
Type on the cmd promt: fastboot devices , if you see under devices attached, ??????????? or numbers and letters, your phone is connected into fastboot mode
If you don't have this, check if the drivers was correctly installed.
With the phone connected in fastboot mode, type in the cmd promt: fastboot flash recovery recovery_original_flashable.img
After this command finish, type fastboot reboot and enter into the default recovery and try to update the system
I not guarantee the exit of this operation, this solved my problem, but maybe yours not. If you aren't sure, ask here or send phone to your repair center
Click to expand...
Click to collapse
when entered the command for original recovery its says 'error:cannot load recovery_original_flashable.img'
S34Qu4K3 said:
Glad to help
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Hello !!
Model Huwaei : Asceud G510 -- G510-0200
Problem : Stuck On Logo Flash Done
I Have Same Handset-Stuck On Huwaei Logo ! Already Flashed !!
With
HUAWEI-Ascend-G510-firmware（G510-0200,Android_4.1,Emotion_UI,V100R001C00B173,Normal,05011EUC）
Above File But Same Frimware Update Done !! But Sam Stuck On Huwaei Or Restart
Any Guidence- @ ?
please my p6 is stucked at bootloop and when i go to recovery it says unable to mount cache,plz any help
the volume buttons on my device don't work, and my android is on 8.0.0, I am wanting to upgrade to 9.0.5, but the device will not let me update with the bootloader unlocked, so I wonder if there is any way to do this without having to use the volume buttons, thanks in advance
andrevianaa said:
the volume buttons on my device don't work, and my android is on 8.0.0, I am wanting to upgrade to 9.0.5, but the device will not let me update with the bootloader unlocked, so I wonder if there is any way to do this without having to use the volume buttons, thanks in advance
Click to expand...
Click to collapse
I'm having the same issue today, try this. I will be performing the same thing today and will update you on how I do.
EDIT: Didn't see that you said your volume doesn't work. Whoops. There might be a way to reboot into ADB recovery. Try putting your device into Developer Mode, turn on Advanced Reboot, and when you hold down the power, press "Reboot" and then "Bootloader". Then just use ADB.
AwlsomeAlex said:
EDIT: Didn't see that you said your volume doesn't work. Whoops. There might be a way to reboot into ADB recovery. Try putting your device into Developer Mode, turn on Advanced Reboot, and when you hold down the power, press "Reboot" and then "Bootloader". Then just use ADB.
Click to expand...
Click to collapse
what is ADB? how to use it?
andrevianaa said:
what is ADB? how to use it?
Click to expand...
Click to collapse
Go and turn on Advanced restart, click bootloader once holding the power button when the device is on then proceed to go to fastboot and type in the command
"fastboot oem lock"
then:
"fastboot erase userdata"
You will lose all your data (I think).
I need to do this to unlock bootloader but power button not working to select option any ideas plz?
Hey Guys i have an Big Problem and i dont knwo what to please help
So i wanted to flash lineageos and that worked good but its garbage the camera ist very basic and there are a lot of features which not work
So i decide to get back to Oxygenos und root it
Yeah and know my phone is stuck at something it only shows the one plus logo, sometimes nothing, and somethimes i get into fastboot but that not helping because when i boot or flash boot a recovery nothing happends it shows only the one plus logo!!
So i have an One Plus image but i cant sideload it into fastboot
is there an fastboot image?
i hope so!!
thans for reading i am from germany so my english is not the best
Use the msm tool for unbrick your devices
ChrisFeiveel said:
Use the msm tool for unbrick your devices
Click to expand...
Click to collapse
Hey thanks for anwering i have downloaded it but i really dont know how to use it
but the bigger problem ist that the phone only shows a red flash and a white circle!
so i cant get into fastboot
SeppelLetsPlay said:
Hey thanks for anwering i have downloaded it but i really dont know how to use it
but the bigger problem ist that the phone only shows a red flash and a white circle!
so i cant get into fastboot
Click to expand...
Click to collapse
Search for the link and be sure to read on how to use the tool completely until you understand!
[OP8T][OOS KB05AA/BA/DA] Unbrick tool to restore your device to OxygenOS
TheGhost1951 said:
Search for the link and be sure to read on how to use the tool completely until you understand!
[OP8T][OOS KB05AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Click to expand...
Click to collapse
Yeah but i dont get in EDL or Fastboot
its only shows the obeplus logo every 3 seconds and reboot
but power + vol +/- are ignored
only +/- is also not working
please help i am despair
SeppelLetsPlay said:
Yeah but i dont get in EDL or Fastboot
its only shows the obeplus logo every 3 seconds and reboot
but power + vol +/- are ignored
only +/- is also not working
please help i am despair
Click to expand...
Click to collapse
Try power+vol- to get to recovery.... Other than that keep trying different button combinations... What happens when you hold both vol buttons and power button for more than ten seconds? To completely shut phone off hold vol up and power button. Otherwise I have heard some say let the phone battery run down battery until phone shuts off. Then try the buttons again. Only just both vol buttons no power and phone not plugged in. Start the MSM tool it will say waiting on device, then with phone off, hold both vol buttons down wait 10 seconds then connect phone to PC.
So when i press power + "-" nothing happend, no vibration, no screen nothing
when i press +/- and power the phone starts and there stands fastboot but a few seconds läter come the red flash and the phone shuts down(but it is onto an powercord)
when i only press +/- also nothing happend and the phone is not responded in msm
SeppelLetsPlay said:
So when i press power + "-" nothing happend, no vibration, no screen nothing
when i press +/- and power the phone starts and there stands fastboot but a few seconds läter come the red flash and the phone shuts down(but it is onto an powercord)
when i only press +/- also nothing happend and the phone is not responded in msm
Click to expand...
Click to collapse
Do not use +/- and power....do not use the power button just +/- only
TheGhost1951 said:
Do not use +/- and power....do not use the power button just +/- only
Click to expand...
Click to collapse
ok but as i sag wehen i power off the device(with fastboot) the +/- doesent work and its not regnosized
but i have sucsessfully launched twrp with fastboot boot twrp
but when i sideload the zip i get the error that the storage cant be mounted
SeppelLetsPlay said:
ok but as i sag wehen i power off the device(with fastboot) the +/- doesent work and its not regnosized
but i have sucsessfully launched twrp with fastboot boot twrp
but when i sideload the zip i get the error that the storage cant be mounted
Click to expand...
Click to collapse
You don't side load it, make sure the magisk app is located in phone storage, boot to twrp then select install while in twrp......
Ok and for what i need magisk first i must get oxygenos to run
and how can ich get magisk.apk onto the device? on my pc i cant see the phone/storage
SeppelLetsPlay said:
Ok and for what i need magisk first i must get oxygenos to run
and how can ich get magisk.apk onto the device?
Click to expand...
Click to collapse
Sorry that response was for another person!
TheGhost1951 said:
Sorry that response was for another person!
Click to expand...
Click to collapse
oh ok sorry
TheGhost1951 said:
You don't side load it, make sure the magisk app is located in phone storage, boot to twrp then select install while in twrp......
Click to expand...
Click to collapse
Ok, you were able to get to fastboot, now we are getting somewhere....hold on. We will get you up and running....!
You will need phone in fastboot mode connected to PC..,..do you have the ROM you want to flash?
TheGhost1951 said:
You will need phone in fastboot mode connected to PC..,..do you have the ROM you want to flash?
Click to expand...
Click to collapse
yeah i have the stock rom
c.47 europe full ota
OnePlus 9 and 9 Pro Firmware Flash File (Stock ROM)
If you're using a OnePlus 9 and 9 Pro or planning to buy it, then this guide is for you. If you want to install Stock Firmware, here we will share the
www.getdroidtips.com
SeppelLetsPlay said:
yeah i have the stock rom
c.47 europe full ota
OnePlus 9 and 9 Pro Firmware Flash File (Stock ROM)
If you're using a OnePlus 9 and 9 Pro or planning to buy it, then this guide is for you. If you want to install Stock Firmware, here we will share the
www.getdroidtips.com
Click to expand...
Click to collapse
Extract the zip, should see a payload.bin and change it to payload.img. then fastboot flash payload.img that will flash it to the phone... Then fastboot boot, that should reboot into setup screen on phone. If it doesn't, the last step would be to change the active slot and reboot again in fastboot mode...
Finally, from fastboot mode, fastboot twrp img and in twrp tap on reboot and boot to EDL mode with MSM tool "started" and that will start the process... If the above procedure fails! This is the way I recover from a crashed phone!
unknown partition 'payload.img'
error: cannot determine image filename for 'payload.img'
Does not work
SeppelLetsPlay said:
unknown partition 'payload.img'
error: cannot determine image filename for 'payload.img'
Does not work
Click to expand...
Click to collapse
Read my last post above...to use the MSM tool