I tried to set up a set of BT Stereo Headphones in a shop the other day to test them. We couldn't get them to go so we could listen to mp3s. I use GSPlayer.
Has anybody done this successfully? How do you tell the Magician (WM5) to output the sounds to the bluetooth headset and not to the normal headphones audio output socket?
many thanks,
Zaine.
Cant remeber where i got and who to give props too. but here it is
just run the output all audio to bluetooth and the run the other to turn off
and the auto mode which i havent tested out yet
Bewdiful.
Bewdy mate.
Thanks very much, that seems to do the trick. It works with my normal headset now. I'll go back to the shop now and test those other headphones.
The auto toggle seems to work OK as well, btw.
Once again, thanks a million.
Good deal. I gotta try this out. Will this work w/ the Wizard?
It doesn't work with my Magician + BHCS BT Patch...
I've read plenty of threads about this. For Magician, A2DP is WMP only. Doesn't work with anything else.
Mind you, this is what everyone else has said. I have not tested this myself.
I can confirm that, in my experience.
Also: WMP is pretty rubbish about its A2DP support. For some reason it'll only stream mp3s within a certain bitrate, too low and it uses the device's speaker.
It won't do non-stnadard sample-rates either, and on most setups it seems to "burp" every few seconds.
Ik am succesfull with the standard WMP though. It plays all bitrates, and only rarely stutters... So when I use WMP, I am satisfied!
Works fine, just bad quality sound with Bluetooth.
Well, I tried again in the shop and everything worked fine on my Magician (a T Mobile MDA compact with WM5). However, the sound quality was pretty rubbish. The sales guy reckoned that was a function of Bluetooth.
So, not a winner there. But, I can now listen to my voice recordings and podcasts via my normal BT Headset, which is really handy.
Thanks again to the Frioman - a really useful couple of apps. The toggle is on my Today page now!
Works fine, just bad quality sound with Bluetooth.
Well, I tried again in the shop and everything worked fine on my Magician (a T Mobile MDA compact with WM5). However, the sound quality was pretty rubbish. The sales guy reckoned that was a function of Bluetooth.
So, not a winner there. But, I can now listen to my voice recordings and podcasts via my normal BT Headset, which is really handy.
Thanks again to the Frioman - a really useful couple of apps. The toggle is on my Today page now!
Works fine, just bad quality sound with Bluetooth.
Well, I tried again in the shop and everything worked fine on my Magician (a T Mobile MDA compact with WM5). However, the sound quality was pretty rubbish. The sales guy reckoned that was a function of Bluetooth.
So, not a winner there. But, I can now listen to my voice recordings and podcasts via my normal BT Headset, which is really handy.
Thanks again to the Frioman - a really useful couple of apps. The toggle is on my Today page now!
Nice triple post! But...
bobgorila said:
Also: WMP is pretty rubbish about its A2DP support. For some reason it'll only stream mp3s within a certain bitrate, too low and it uses the device's speaker.
It won't do non-stnadard sample-rates either, and on most setups it seems to "burp" every few seconds.
Click to expand...
Click to collapse
Yeah, I got this all the time, espically if I fast forwarded and rewound. And I was re-encoding mp3s to different bitrates, constant and variable without much success.
"Damn WMP and it's lack of features! The stupid thing can only play MP3s... and... WMA..."
I did a few test re-encodes to WMA 9 (not 9.1) @ 192 and now I get those burps and crackles every ... ten minutes? Half an hour? Definitly not every... what, twenty seconds to a minute.
If this is a problem for you, try re-encoding to WMA 9 @ 192. I use dbPowerAmp http://www.dbpoweramp.com/
ooff! took me about 2 and 1/2 days to re-find this thread again!! can we get a sticky on this????
used this on my Wizard (aka mda) and my Moto H3 and now can listen to my tv shows on the train w/my bt headset!
thanks!!!
I got a Unable to Open bluetooth audio gateway or something, though my headset is connected...strange.
blue tooth program
thefrioman said:
Cant remeber where i got and who to give props too. but here it is
just run the output all audio to bluetooth and the run the other to turn off
and the auto mode which i havent tested out yet
Click to expand...
Click to collapse
There is three icons one for audio off and one for audio on and one for toggle.
I ran one at a time but after 15 or 20 minutes I loose blue tooth connections and the communications manager freezes and when I click on the blue tooth Icon in settings it does nothing, I have to turn the mda off and then I can listen over the blue tooth again, but after 1or 20 minutes it does it again.
can you help?
help
is there any one out there
BT Audio User Problem
I downloaded BT Audio and installed the three .exe files on my 8525. Soft reset the device and then toggled the audio on.exe. Sound still coming out of the speaker and not the BT headset.
I do have the BT-620's and they work fine (even before the BT Audio install). I am trying to accomplish being able to listen to WM without having to lug the BT-620's around all the time.
I am wondering if having the 620's software is conflicting with BT Audio?
Also, I think to get the audio stream to play to the headset, one has to activate the voice dialing feature from the headset? I can get the sound to play only for a few seconds when I do this. Do I need to de-activate voice dialing? If so, how?
Thanks and Happy Holidays
Wokring great with Plantranics voyer 510
Thanks for such nice software....it is working great in my mda and voyer 510 bluetooh head set.
imate JAM Arabic
Please I am needly imate JAM Arabic for Rom 1.12.00WWE .
Please help me .
and thank's for every .
NIce
Thank you so much, toggle works well, switches to calls and back
very cool.
Okay, I am trying to figure out how i can use my mono bluetooth device (jawbone), to be able to playback audio- not from a phone call.
I'm not using it for music (which would sound horrible anyway), I listen to a lot of podcasts from espn, and would like to be able to listen to it w/o plugging the stereo headphones in, so it isn't so obvious...
Oops, forgot, phone is a kaiser.
I tried switching the joint stereo connector value to 0, and re-pairing the jawbone, but it didn't work. any ideas on how to do it???????
mrbkkt1 said:
Okay, I am trying to figure out how i can use my mono bluetooth device (jawbone), to be able to playback audio- not from a phone call.
I'm not using it for music (which would sound horrible anyway), I listen to a lot of podcasts from espn, and would like to be able to listen to it w/o plugging the stereo headphones in, so it isn't so obvious...
Oops, forgot, phone is a kaiser.
I tried switching the joint stereo connector value to 0, and re-pairing the jawbone, but it didn't work. any ideas on how to do it???????
Click to expand...
Click to collapse
There was a program called Bluetooth Audio Router, but it was for samartphones, anyway try it out.
never mind , I found a program called bluetooth audio by blade2032 that solved my problem .thank you .
Bluetooth Audio over the Treo Pro or WM5 and up
Thanks for the lead on BlueTooth Audio v1.0 Freeware.
You rule.
PS Everyone here is the link for the software:
http://www.freewarepocketpc.net/ppc-download-bluetooth-audio-v1-0.html
ENJOY
Hello. I have a Desire HD with android 2.2.1.
Last year I had a HTC Touch HD with windows mobile. I bought a chinese copy of the jabra bt3030. The sound was out of sync with any video I could play. I didn't try with other phones, anyway I didn't spend that much for the headset, so I just sold it on ebay....thinking that that's why people don't buy chinese copies. OR maybe it was a problem of the transmitter of the Touch HD...so I didn't buy anything else and stayed with the normal wired earphones instead of having another stereo bluetooth headset.
NOW
I have the Desire HD, and bought THE ORIGINAL jabra BT3030. EXACTLY the same problem: youtube, trailers from MDB, .avi TV-rips played with rockplayer ---- EVERYTHING has this horrible out-of-sync audio which makes it impossible to watch even 5 second of a video without getting crazy.
I mean is that a problem of every stereo headset? IS that too much information to be sent to the headset? What can I do to make the sound sync with the video?
I have a stock rom.
Does anyone have this kind of problem? With which phone? With which headset? Is there any support forum for the Jabra BT3030 (it is the dog-tag one) ?
Last time it was a cheap 20$ chinese copy....this time is a retail 65$ boxed jabra....and I EXPECT it to work properly...
maybe you can set up the connection as new. or reset to factory settings
what do you mean by 'set as new' ? I paired the devices today for the first time. Reset to factory settings...is something i would rather not do
BT connections have a small delay.
You can try to set some BT settings to create a smaller buffer or something...
RammY said:
BT connections have a small delay.
You can try to set some BT settings to create a smaller buffer or something...
Click to expand...
Click to collapse
for instance? which BT settings could I adjust?
About the delay: i used until now a normal mono bluetooth headset, which is not A2DP so cannot reproduce media content (music or games sound and so on). There is a paid app on the market called BT Switch. This app redirects every sound of the phone to the mono bluetooth headset, allowing you to listen to music, hear the GPS directions, watch a video on youtube with the sound on the mono headset and so on.....well, there isn't any delay. That's why i can't understand why the stereo headset has so much delay....ok, it is stereo, more informations to send and so on...but the mono one has NO delay at all.
But of course a stereo solution with good earphones is much better than a mono with the low quality sound of every mono headset, which are built only to use the phone and not reproduce any kind of media sound...
Hey guys,
Im having a small problem with my moto 360 and the bluetooth connection in my car radio, when the watch is connected and someone calls me, the sound should be out from the car speaker but it comes from the phone, if i shut down BT and get it on again while the radio is on, it´s perfect, otherwise no sound on the car. Any solution or software to manage BT coonections ?
Try the Trigger Playstore app. Seems to be working for the Huawei Watch gang last few posts here
no luck :/
Hey Guys - I have a Moto360 1st Gen.
Longer story short:
I have my phone paired via BT to my watch, and also to my Cars bluetooth Audio. If im driving in the car and also have my watch on and I receive a call, the in-car bluetooth will notify me and i will answer the call via the car. However any Audio for the call routes through the watch and not the cars audio, AKA i cant hear them and they cant hear me. When I turn my watch off, Obviously, the Cars Bluetooth works fine -- But when both are paired at the same time, my car receives and sends no audio, the watch gets it first.
Is there any way whatsoever I can turn this feature off, so my car gets audio and not the watch? Ive tried a few things and nothing seems to work - other then old school turning my watch off manually when i get in the car and turning it on when i get out of the car