Develop Bugs

[Q] Kindle eReader app on CM9?

Hey, just a quick question. Is it possible to get the eReader app that comes preinstalled on the Kindle on a different ROM like CM9? The one that comes with the Kindle is so much better than the ones I have seen in the Play store.

Get kindle for android
Sent from my Desire HD using Tapatalk

stumpyz9 said:
Get kindle for android
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
He means a port I think... the app is just not the same

veeman said:
Hey, just a quick question. Is it possible to get the eReader app that comes preinstalled on the Kindle on a different ROM like CM9? The one that comes with the Kindle is so much better than the ones I have seen in the Play store.
Click to expand...
Click to collapse
Did you try Titanium Backup?
Gửi từ Kindle Lửa của tôi qua Tapatalk 2

I personally have tried using a Titanium Backup version of the stock Kindle Reader on ICS AOKP Build 32. It worked when I first restored it, but when I rebooted it always force-closed when I tried to open it. I don't know if this was a kernel issue or a ROM issue, but both have been updated since then, so it might be worth another try. Also I have never tried it on an CM9-based ROM.
Sent from my Amazon Kindle Fire using XDA

fiddlefaddle said:
He means a port I think... the app is just not the same
Click to expand...
Click to collapse
Yup, I mean a port.
linktohack said:
Did you try Titanium Backup?
Gửi từ Kindle Lửa của tôi qua Tapatalk 2
Click to expand...
Click to collapse
I tried but it just force closes when I open it.

[Q] gedeROM 7-5-12 internet via ad-hoc

hello, how to get internet access point in the Nokia E71?

pathf1nder said:
hello, how to get internet access point in the Nokia E71?
Click to expand...
Click to collapse
Doesn't seem to work for me. Heard somewhere of an app in market would allow you connect, but I've never try.
Gửi từ Kindle Lửa của tôi qua Tapatalk 2

linktohack said:
Doesn't seem to work for me. Heard somewhere of an app in market would allow you connect, but I've never try.
Gửi từ Kindle Lửa của tôi qua Tapatalk 2
Click to expand...
Click to collapse
tell me what application?
ZT_180_adhoc_ switcher does not run on this firmware

[Q] AOKP Kindle Fire/Swype - 'screen size not supported'

I'm running AOKP Build 36 on my Kindle Fire and i cannot manage to install Swype. Using the LCD density switcher, i have switched it to 240 then tried to login and install but i keep getting 'screen size is not supported'. I've tried every other standard dpi listed in the app as well but get the same message.
I've been running ScreenMonitor as well and sure enough, the screen size isn't supported by Swype. They are off by some pixels.
Anyone experience similar problems or have success where i've failed?
Thanks.

This may sound like a stupid question, but did you reboot after setting your screen density?
Swipe works fine for me.

Maybe it's the app you're using? Seems like it would be easier to open the build.prop file with a text editor and change the line that way or get an app like build.prop editor and it works the same, but with nice organized dropdown boxes.

Thank for your responses. I'll try editing the build.prop file and see if that works. The fact that i'm running AOKP 36 shouldn't matter, right?
This may sound like a stupid question, but did you reboot after setting your screen density?
Click to expand...
Click to collapse
I restarted after every change.

Even if you manage to install Swype, you won't be able to download addition language in ICS, so you'd better backup, install CM7 bare bone (the smallest CM7), install Swype, back it up using Titaniumbackup then restore it to aokp.
That's all.
Gửi từ Kindle Lửa của tôi qua Tapatalk 2

Are you getting your swype package from the official swype beta? That's where I got mine from and it works perfectly... I followed these instructions (half of it is just rooting): http://blog.pathany.com/2011/12/swype-on-kindle-fire.html

I tried the build.prop method and that just didn't work at all. It wouldn't load it with the right screen density.
I looked at those instructions, but my problem exists when i have to login to download the actual apk through the swyp-installer.apk.
I suppose i could try loading CM7 then backing and reinstalling aokp.
install CM7 bare bone (the smallest CM7), install Swype, back it up using Titaniumbackup then restore it to aokp.
Click to expand...
Click to collapse
This worked very well. Thank you so much.

do you think you can provide me with the back up to save me the trouble?

collinsac24 said:
do you think you can provide me with the back up to save me the trouble?
Click to expand...
Click to collapse
Don't know if it will work, Swype active code maybe hardcode inside Swype.
Just back it up once and you're free to use it even if you wanna flash another ROM.
Gửi từ Kindle Lửa của tôi qua Tapatalk 2

linktohack said:
Don't know if it will work, Swype active code maybe hardcode inside Swype.
Just back it up once and you're free to use it even if you wanna flash another ROM.
Gửi từ Kindle Lửa của tôi qua Tapatalk 2
Click to expand...
Click to collapse
Never mind I had a backup from my transformer prime in my dropbox now working
Sent from my Galaxy Nexus using XDA Premium HD app

[Mod][Dev]SecSetting S5+Note2 reduce ram and feature for 4.4.2

Everyone know s5setting usage high ram so i need to share my dev.
This is my dev dual setting for usage ram only 32mb on normal stage
Note3+s5 setting
Feature added
- all feature same note2+s5 version (different only change some to root menu with fully icon s5)
- support one hand all screen
- remove spen and personal mode
- add more some change
- other I can not forgot
Download
https://mega.co.nz/#!PYdFlJRL!JIi7YZ8oMXoCv3Z4b_asKYzXfPYzrZY0jLySgcg53dE
==================================
For note2+s5 setting
Feature added
- torch menu
- app oops menu
- 8 lockscreen effect work all now
- added utra power saving to note2
- added download booster to both SecSettings
- added theme menu to note2 setting
- mod max 10 app for toolbox
24-6-2014
- add LED menu to s5 setting
- add smart scroll
28-6-2014
- added hand car mode to s5setting
- added air guesture (air call accecpt)
30-6-2014
- Device Status Info "Official" Instead Of Modified ["Device Status" (Settings -> More -> About device -> Status -> Device Status) to be "Official"]
- added block call/sms in secsetting
- added svoice in secsetting
- Disable Menu Software Update
and some mod on csc
- added menu exit in browser
- added call button on call log
- added shutter sound on/off menu in camera
- Enable Camera DuringCall
- Disable Phone Number Formatting
- Disable Sms To Mms Conversion
- Disable Converting Effect Between SMS MMS
- Message Recipient Limit to 999
- Message Sms To Mms Text Threshold to 999
- Enable Scheduled Message
- Enable Scheduled Msg Box
- other i can't forgot
Let try and comment what's missing or recommend for next version for complete this project
Download
https://mega.co.nz/#!KVtQWZ5I!uBh2CSFQ_yof1Z9nKtHSYwLay-F6XW6izUtOtW5O09E
mirror
http://d-h.st/TLn
Sent from my GT-I9300 using Tapatalk

4.4.2 or 4.3
Gửi từ GT-I9300 của tôi bằng cách sử dụng Tapatalk

tegieng92 said:
4.4.2 or 4.3
Gửi từ GT-I9300 của tôi bằng cách sử dụng Tapatalk
Click to expand...
Click to collapse
for 4.4.2 archi port

Perfect ! But why dont u include your previous mod.

minhdale said:
Perfect ! But why dont u include your previous mod.
Click to expand...
Click to collapse
it's still on dev, i not finish it in soon.
i think it should edit more for the most look like s5 and on note2 should friendly more than this.

Particle efenct
I installed very stable, but no effect of particle ?

BurakPasa said:
I installed very stable, but no effect of particle ?
Click to expand...
Click to collapse
that effect have on your base rom?
if have it will support
Sent from my GT-I9300 using Tapatalk

I flash with update-s5-archive but I don't have bubble lockscreen effect. Can u upload here and add it ?

Your keyguard has a bug. Album cover don't show on lockscreen it show background instead. And it effect too large than normal, text not right place it higher than s5
I fix it by take keyguard original but it set none effect when I set blind effect and reboot.

minhdale said:
I flash with update-s5-archive but I don't have bubble lockscreen effect. Can u upload here and add it ?
Click to expand...
Click to collapse
ok , that are my wrong. i will fixed it and upload again

Update on op now
Sent from my GT-I9300 using Tapatalk

Is anything else needed for this? android.policy.jar mods?

Kryten2k35 said:
Is anything else needed for this? android.policy.jar mods?
Click to expand...
Click to collapse
my boss, this mod I dev only secsetting.
Sent from my GT-I9300 using Tapatalk

Hi can this working on N2
Sent from my SM-G900F

thereassaad said:
Hi can this working on N2
Sent from my SM-G900F
Click to expand...
Click to collapse
I think it should work on N2 too because archi port base N2 rom
next version I will do
- add more smart feature menu support
- add drive mode for s5 setting
and other still on thinking bcoz not have any idea and feedback
Sent from my GT-I9300 using Tapatalk

Aonja said:
I think it should work on N2 too because archi port base N2 rom
next version I will do
- add more smart feature menu support
- add drive mode for s5 setting
and other still on thinking bcoz not have any idea and feedback
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
@Aonja S5 Toolbox not working on my N2 & this working fine
Sent from my SM-G900F

thereassaad said:
@Aonja S5 Toolbox not working on my N2 & this working fine
Sent from my SM-G900F
Click to expand...
Click to collapse
yes. Note2 use different framework, but I can do it for you if you told your firmware
NE1 right?
Sent from my GT-I9300 using Tapatalk

Aonja said:
yes. Note2 use different framework, but I can do it for you if you told your firmware
NE1 right?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Yes NE1 please I use it & I use this rom
& I tried this but I get bootloop my phone dont wake up after I flashed
https://mega.co.nz/#!8VgFzI7Z!7N5QjKWCprRAjiOhIE0u8of8rZDtpsZrraG7L-eB52I

Ultra power save setting doesn't work. I active it but no happens nothing

UPSM Work fine for me

[Q] Pop up view size

Hi folks, I was trying to do some work with my tablet and I was using calculator pop up window, but it was so annoying because I could edit the size of the window and hence it was bothering my job. Is there any way to change that? I found a tweak here on the tab s forum to add four Windows in multi window feature but anything to resize the pop up window.
Thanks
Sent from my SM-T800 using XDA Free mobile app

NO.........

amadoaramendiz1 said:
Hi folks, I was trying to do some work with my tablet and I was using calculator pop up window, but it was so annoying because I could edit the size of the window and hence it was bothering my job. Is there any way to change that? I found a tweak here on the tab s forum to add four Windows in multi window feature but anything to resize the pop up window.
Thanks
Sent from my SM-T800 using XDA Free mobile app
Click to expand...
Click to collapse
kenkiller said:
NO.........
Click to expand...
Click to collapse
yes there is a way...several actually. Without adding any extra apps u can just hold the edge of the pop up window and u will see a yellow/gold outline appear then u can stretch or shrink it where u want it BUT there is a minimum size (the outline will turn red when u reach the smallest window possible). Also...there is an app by a guy named @xperiacle which i'll link to below thats lets u create shortcuts on your home screen then have them open automatically in floating mode with a custom size of your choosing
https://play.google.com/store/apps/details?id=mobi.xperiacle.penwindowshortcuts&hl=en
^floating window shortcuts app
@amadoaramendiz1
i forgot one MAJOR detail...u can only resize from the right or bottom sides! The yellow line will appear when u touch the top but like u said it will only allow u to move the window...while nothing happens at all when u touch the left side

Never mind, yes the solution is to find the edge in the right corner. Genius!
Thanks for your help
Sent from my SM-T800 using XDA Free mobile app

THEDEVIOUS1 said:
yes there is a way...several actually. Without adding any extra apps u can just hold the edge of the pop up window and u will see a yellow/gold outline appear then u can stretch or shrink it where u want it BUT there is a minimum size (the outline will turn red when u reach the smallest window possible). Also...there is an app by a guy named @xperiacle which i'll link to below thats lets u create shortcuts on your home screen then have them open automatically in floating mode with a custom size of your choosing
https://play.google.com/store/apps/details?id=mobi.xperiacle.penwindowshortcuts&hl=en
^floating window shortcuts app
@amadoaramendiz1
i forgot one MAJOR detail...u can only resize from the right or bottom sides! The yellow line will appear when u touch the top but like u said it will only allow u to move the window...while nothing happens at all when u touch the left side
Click to expand...
Click to collapse
Canot add all app for multi.
Gửi từ SM-T705 của tôi bằng cách sử dụng Tapatalk

Ok here is a dumb question. How exactly do you open an app in a pop up window? Is this a function built in to thunder rom?

HLG114 said:
Canot add all app for multi.
Gửi từ SM-T705 của tôi bằng cách sử dụng Tapatalk
Click to expand...
Click to collapse
If u install my rom then it has a mod built in that automatically makes all apps available in multiwindow...if not then u will need to use another app such wanam xposed module or @xperiacles multiwindow manager to add them to the list
ifly4vamerica said:
Ok here is a dumb question. How exactly do you open an app in a pop up window? Is this a function built in to thunder rom?
Click to expand...
Click to collapse
For some dumb reason samsung seems to have removed the floating window feature from the stock rom so unless the creater of thunder rom specifically added it back then no its not...i have included this function in my SuperSamsung rom which is compatible with all version of the tab S so feel free to flash it

THEDEVIOUS1 said:
If u install my rom then it has a mod built in that automatically makes all apps available in multiwindow...if not then u will need to use another app such wanam xposed module or @xperiacles multiwindow manager to add them to the list
For some dumb reason samsung seems to have removed the floating window feature from the stock rom so unless the creater of thunder rom specifically added it back then no its not...i have included this function in my SuperSamsung rom which is compatible with all version of the tab S so feel free to flash it
Click to expand...
Click to collapse
Thanks for the info I am downloading your rom now! I usually like to stay stock so yours should be perfect since all you remove is Knox.
Thanks