Hi guys,
I recently replaced the screen of my G2 because it had a dead section where it didn't respond to touch. I was expecting that the message that pop up every time I rebooted the phone would go away but it still comes up some times. Is there a way to disable this? Or maybe rename the app that controls this message?
I know that the screen I had installed is working fine. At least is responding to touch and has no dead spots. Any help would be greatly appreciated. Thanks!
rickmarz said:
Hi guys,
I recently replaced the screen of my G2 because it had a dead section where it didn't respond to touch. I was expecting that the message that pop up every time I rebooted the phone would go away but it still comes up some times. Is there a way to disable this? Or maybe rename the app that controls this message?
I know that the screen I had installed is working fine. At least is responding to touch and has no dead spots. Any help would be greatly appreciated. Thanks!
Click to expand...
Click to collapse
Same problem here :'(
Related
Hi All,
I have the CDMA version of the Rhodium and happen to be in Europe right now. After a few calls to Verizon I have been using voice and data successfully for the past few days.
Last night after dinner however, I realized my phone appeared frozen and unresponsive via the touch screen. I powered down the phone using the hangup/power button and powered it back on. Touch screen unresponsive. I Soft-Reset and still same problem. I re-flashed the ROM provided by verizon (Since I couldn't get the send/hangup & power keys to do a hard-reset) and still nothing.
I am fairly certain this was not exposed to any water damage. All keyboard and hard-buttons still remain responsive. Anything I can do to try and resolve this?
BTW: The stickers inside are red--they have been red since probably a week after getting the phone but everything has functioned fine for months -- I blame humidity on the red-sticker part.
Any thoughts here on resolving lack of response from Rhodium Touch Screen?
Thanks in advance.
ardentsilent said:
Hi All,
I have the CDMA version of the Rhodium and happen to be in Europe right now. After a few calls to Verizon I have been using voice and data successfully for the past few days.
Last night after dinner however, I realized my phone appeared frozen and unresponsive via the touch screen. I powered down the phone using the hangup/power button and powered it back on. Touch screen unresponsive. I Soft-Reset and still same problem. I re-flashed the ROM provided by verizon (Since I couldn't get the send/hangup & power keys to do a hard-reset) and still nothing.
I am fairly certain this was not exposed to any water damage. All keyboard and hard-buttons still remain responsive. Anything I can do to try and resolve this?
BTW: The stickers inside are red--they have been red since probably a week after getting the phone but everything has functioned fine for months -- I blame humidity on the red-sticker part.
Any thoughts here on resolving lack of response from Rhodium Touch Screen?
Thanks in advance.
Click to expand...
Click to collapse
Same here .. Did you find anyway to get it working?
One of our HTC Desire's screen is no longer displaying although the phone is on, the buttons at the bottom are lit, it receives calls and you can even answer them by swiping your finger from top to bottom. I have tried removing the battery and also memory card and SIM but to no avail. I am currently leaving it dismantled for an hour or so to see if that helps. If I don't find the solution from posts on this thread I will reluctantly try a hard reset before calling HTC in the morning. Googling 'blank screen' I can see that others have had this problem however I have not come across a solution yet. Any help would be very greatly appreciated.
SLCD- brick?
!PANDA said:
SLCD- brick?
Click to expand...
Click to collapse
...........?
Zaphodski said:
...........?
Click to expand...
Click to collapse
How did your phone reach this state? What were you trying to do? Where are you from? Is the phone branded/unbranded? Is it an SLCD/AMOLED? Which ROM's on it? Preliminary qns..
droidzone said:
How did your phone reach this state? What were you trying to do? Where are you from? Is the phone branded/unbranded? Is it an SLCD/AMOLED? Which ROM's on it? Preliminary qns..
Click to expand...
Click to collapse
The handset screen just went blank whilst trying to make a call. It rang a couple of times last night (screen still blank) and I actually managed to answer one call by swiping my finger down the screen. UK based handset on Orange with stock Froyo. I have no idea what type of screen the Desire has.....the same as everyone else? It's beeping at me now as I type to remind me of a calendar appointment
Very unlikely to be a software issue then. Better have it looked over at service. I'm guessing your display will need to be changed.
Hi All,
I have a rooted (boot loader unlocked) HTC Wildfire S Marvel (A510E)
It has a strange problem. The lock screen freezes every time after locking and I have to try about 6 to 7 times to unlock it.
This is Common across all the ROMs that I have tried including stock and many Custom ROMs.
Also, two stripes of portion of the phone's screen i.e., upper side and left side doesn't work at all.. Not even touch.
For ex; I can't type alphabets 'q' and 'a' in qwerty keyboard. However, display is working. not touch.
The warranty of phone is expired and I really want to know if there is any way that I can fix either or both of these problem in home.
Any help will be much appreciated.
Kindly inform me if I posted this question in wrong area as I am totally new to this forum.
The lockscreen 'freeze' generally happens to everyone,even me,when I use the scary governor.It also happens for stock users.Did your screen die due to excess heat at that area I.e.do you use it in extremely hot conditions?
Lock screen > Grounding issue
I bought Wildfire S day before (New but without warrenty) and it was working very good. When i charge it full and then started using it its lock screen in not responding well. After doing 5-6 retries i was on the home page. Opened menu and tried to click on Favourites or Downloaded icons, it not working. Sometime it does but i cant open downloaded apps page. Similarly its back button is totally not working.
I charged it from my other HTC charger and then then problem was over. I worked well. But again after some time same problem started. I have searched over internet and seen similar problem in HTC Sensation for grounding. And there is a way out given too... But no such procedure can be applied to Wildfire S.
Can anyone suggest any solution?
Thnx.. Nope..
SunnyChrono6 said:
The lockscreen 'freeze' generally happens to everyone,even me,when I use the scary governor.It also happens for stock users.Did your screen die due to excess heat at that area I.e.do you use it in extremely hot conditions?
Click to expand...
Click to collapse
Thnx for the reply... Nope.. It started to behave that way after I dropped it once.. I didn't drop it from distance.. It was just a small impact....
sghegde87 said:
Hi All,
I have a rooted (boot loader unlocked) HTC Wildfire S Marvel (A510E)
It has a strange problem. The lock screen freezes every time after locking and I have to try about 6 to 7 times to unlock it.
This is Common across all the ROMs that I have tried including stock and many Custom ROMs.
Also, two stripes of portion of the phone's screen i.e., upper side and left side doesn't work at all.. Not even touch.
For ex; I can't type alphabets 'q' and 'a' in qwerty keyboard. However, display is working. not touch.
The warranty of phone is expired and I really want to know if there is any way that I can fix either or both of these problem in home.
Any help will be much appreciated.
Kindly inform me if I posted this question in wrong area as I am totally new to this forum.
Click to expand...
Click to collapse
Maybe you damaged the digitizer. Search for a new digitizer on net and replace it yourself. You can find guides for it online.
MoeenRana said:
I bought Wildfire S day before (New but without warrenty) and it was working very good. When i charge it full and then started using it its lock screen in not responding well. After doing 5-6 retries i was on the home page. Opened menu and tried to click on Favourites or Downloaded icons, it not working. Sometime it does but i cant open downloaded apps page. Similarly its back button is totally not working.
I charged it from my other HTC charger and then then problem was over. I worked well. But again after some time same problem started. I have searched over internet and seen similar problem in HTC Sensation for grounding. And there is a way out given too... But no such procedure can be applied to Wildfire S.
Can anyone suggest any solution?
Click to expand...
Click to collapse
HTC phones have severe problem of screen not responsive when connected to a power source, may it be a USB or a charger. I had that problem before I got my phone serviced. It was completely resolved.
Just use original charger and make sure the power plug you are using has proper wiring. I mean proper earthing.
I faced same problem few months ago,I send it in HTC customer care .they replaced front panel
Sent from my HTC Wildfire S A510e using xda app-developers app
Hello,
recently my phone's lcd died.. i got it changed..it was working fine but now i am having some problem...but im not really able to tell if its software problem or the hardware..meanwhile using the phone...sometimes... the touch stops responding...the phone is alive because i can see wifi signals drop down or getting up and getting notifications..but i cant scroll or anything...until i rotate the screen...then im able to touch..similarly..pressing the power button to lock the screen and then unlocking the lock makes me used it again...any one ever faced similar prob? please let me know..
I am using CM10 modpunks... an ext2 scrip
thanks.
Hey Guys,
Few weeks ago i notice that the small row of my LG G3 D855 is not responding but after 1-2 hour its working fine & after 2days same problem & again it starts working but again same problem & now its over 3days that part of touch not working.
Anyone else having same issue?
Any solution?
Sounds like issue with the digitizer have u dissassembled the phone ever if so maybe loose connection but sounds like a digitizer shorting out
I never disassembled or never dropped the phone.
I will disconnect & then reconnect the digitizer lets see this works or not and thanks for reply.
Reconnected but still not working
New digitizer
Kashif Hashmi said:
Hey Guys,
Few weeks ago i notice that the small row of my LG G3 D855 is not responding but after 1-2 hour its working fine & after 2days same problem & again it starts working but again same problem & now its over 3days that part of touch not working.
Anyone else having same issue?
Any solution?
Click to expand...
Click to collapse
Hello, I've been having a similar issue to yours, only my entire screen stopped responding to input. I have noticed that the screen responds if I press harder (almost to the point that the screen starts discoloring), but even then it is unreliable. My phone is the LG G3 D855, and I am currently using Euphoria ROM and TWRP. The screen doesn't respond in TWRP either.
Do you have any advice for me? Any help at all would be appreciated.
Ninja243 said:
Hello, I've been having a similar issue to yours, only my entire screen stopped responding to input. I have noticed that the screen responds if I press harder (almost to the point that the screen starts discoloring), but even then it is unreliable. My phone is the LG G3 D855, and I am currently using Euphoria ROM and TWRP. The screen doesn't respond in TWRP either.
Do you have any advice for me? Any help at all would be appreciated.
Click to expand...
Click to collapse
Kashif Hashmi said:
Reconnected but still not working
Click to expand...
Click to collapse
Get a new digitalizer, you must
#starwarsmood