Hi,
I am new to the rooting scene and have just got the SIII and was wondering is it better to flash a rooted rom or just rooting the device.
I have a rooted stock Rogers image and I have the toolkit v5.0
I have read about tripping the flash counter is that a big concern other than warranty issues?
Also if I flash the stock rom and than flash a custom rom will it still trip the flash counter?
Thanks.
cuat420 said:
Hi,
I am new to the rooting scene and have just got the SIII and was wondering is it better to flash a rooted rom or just rooting the device.
I have a rooted stock Rogers image and I have the toolkit v5.0
I have read about tripping the flash counter is that a big concern other than warranty issues?
Also if I flash the stock rom and than flash a custom rom will it still trip the flash counter?
Thanks.
Click to expand...
Click to collapse
Here is the way to root your phone WITHOUT tripping the flash counter.
http://forum.xda-developers.com/showthread.php?t=1739426
Use odin in the development stickies to get back to stock. Then use the following procedure above to root and get the recovery.
I am so afraid I am posting this in the wrong thread
Sorry in advance if I am.
I have a galaxy note 8.0 N5110. I rooted it. I am just looking to unroot. go back to stock and am looking for a guide to do so.
Thanks all
Gary
just flash the stock firmware from odin, that will be fully unroot and like new device, or u can use supersu to fully unroot
Whats the best Guide to root 4.3 OTA and custom recovery?
Got a replacement phone due to hardware issue and this one came with 4.3 already on it...My warranty is up and i know KNOX will be tripped.
I will want to install custom 4.3 and 4.4 roms
Thanks Guys.....I don't need a brick lol
EDIT
used cf root and flashed twrp via odin..Knox showing tripped but who cares lol
Root?
http://howtorootmobile.com/att-galaxy-note-2-sgh-i317-android-4-3-rooting-guide/
Hey guys its been a week since i bought the note 2 and i rooted it. But i cannot find how to flash a custom recovery tutorial anywhere. I am on jellybean 4.1 and the rest of the details (firmware etc) can be found on the screenshots attached..
I would highly appreciate if someone can send me a link to the guide for flashing.. thanks a lot in advance
Sent from my GT-N7100 using XDA Premium 4 mobile app
Just simply flash via Odin
You can choose CWM, Philz touch or TWRP
RazaVakil7995 said:
Hey guys its been a week since i bought the note 2 and i rooted it. But i cannot find how to flash a custom recovery tutorial anywhere. I am on jellybean 4.1 and the rest of the details (firmware etc) can be found on the screenshots attached..
I would highly appreciate if someone can send me a link to the guide for flashing.. thanks a lot in advance
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You got two options either root your phone while being on 4.1.2 or upgrade to official Indian 4.4.2 and then root it.Ofcourse once you root your current 4.1.2 you can try custom 4.4 ROM and if you don't like it you can go back to 4.1.2 or flash a 4.3 custom ROM. To root your 4.1.2 rom read this guide.If you decide to upgrade to 4.4.2 Indian firmware download it from here.
To flash the 4.4.2 ROM on your phone download it from the above link(there are 3 links where the ROM is uploaded) ,use any of the links and download the zip file,extract it you'll get a tar file,put your phone into download mode ,open odin v3.09 on pc and flash the official stock rom by checking the AP tab on odin.You can find tutorials on youtube on how to use odin to flash official stock firmware so just look them up if you need it.Once you flash stock ROM you can root your phone via this guide.
Okay so now things to remember.If you root your 4.1.2 ROM and want to try 4.3 or 4.4 custom ROM you need to flash MJ5 bootloader in order to have working wifi.Bootloader is flashed directly on your mother board and it cannot be downgraded only be upgraded.MJ5 is the last 4.3 bootloader which is KNOX free(what is knox ,blah blah,you can read about it on google).Advantage of MJ5 is you can try 4.1.2/4.3/4.4.2 rom and your warranty and knox remain intact but if you upgrade to official 4.3 or 4.4.2 ROM you'll be on knoxed bootlooader which means you cannot downgrade to 4.1.2 anymore plus rooting a phone with knoxed bootloader will trigger knox 0x1 and your warranty if any will be void (no way yet to reset Knox).So if you have warranty on your phone then my advise is root your 4.1.2 Rom,download any 4.3 or 4.4.2 custom ROM,you wont have wifi working then flash the MJ5 bootloader from here and read this post on how to flash bootloader.
I know it's a lot of info to you but your best guide is self reading from the above links i hooked you up with.Also read comments from people cause that's how I learned I read and read a lot before i jumped the rooting bandwagon cause wanted to make sure i don't brick my phone. Ofcourse whenever in doubt STOP RIGHT THERE and ask us.Dont attempt things that you are not sure of.Good luck.
Thanks for the help
singhpratik87 said:
You got two options either root your phone while being on 4.1.2 or upgrade to official Indian 4.4.2 and then root it.Ofcourse once you root your current 4.1.2 you can try custom 4.4 ROM and if you don't like it you can go back to 4.1.2 or flash a 4.3 custom ROM. To root your 4.1.2 rom read this guide.If you decide to upgrade to 4.4.2 Indian firmware download it from here.
To flash the 4.4.2 ROM on your phone download it from the above link(there are 3 links where the ROM is uploaded) ,use any of the links and download the zip file,extract it you'll get a tar file,put your phone into download mode ,open odin v3.09 on pc and flash the official stock rom by checking the AP tab on odin.You can find tutorials on youtube on how to use odin to flash official stock firmware so just look them up if you need it.Once you flash stock ROM you can root your phone via this guide.
Okay so now things to remember.If you root your 4.1.2 ROM and want to try 4.3 or 4.4 custom ROM you need to flash MJ5 bootloader in order to have working wifi.Bootloader is flashed directly on your mother board and it cannot be downgraded only be upgraded.MJ5 is the last 4.3 bootloader which is KNOX free(what is knox ,blah blah,you can read about it on google).Advantage of MJ5 is you can try 4.1.2/4.3/4.4.2 rom and your warranty and knox remain intact but if you upgrade to official 4.3 or 4.4.2 ROM you'll be on knoxed bootlooader which means you cannot downgrade to 4.1.2 anymore plus rooting a phone with knoxed bootloader will trigger knox 0x1 and your warranty if any will be void (no way yet to reset Knox).So if you have warranty on your phone then my advise is root your 4.1.2 Rom,download any 4.3 or 4.4.2 custom ROM,you wont have wifi working then flash the MJ5 bootloader from here and read this post on how to flash bootloader.
I know it's a lot of info to you but your best guide is self reading from the above links i hooked you up with.Also read comments from people cause that's how I learned I read and read a lot before i jumped the rooting bandwagon cause wanted to make sure i don't brick my phone. Ofcourse whenever in doubt STOP RIGHT THERE and ask us.Dont attempt things that you are not sure of.Good luck.
Click to expand...
Click to collapse
Wow that's a lot of info you provided there, thanks. I am not new to rooting as far it goes I have rooted and flashed many roms on my galaxy s advance and my micromax A87 before that. But note 2 was a flagship device so there are many complications that come along which got me confused. As for now, I have my rooted 4.1.2 stock rom along with cwm recovery flashed via rom manager. I am planning to flash either DN3 or the Xperia Z-ized rom. So my question is: do I have to flash mj5 bootloader to flash DN3 and xperia z-ized or can I directly flash it from cwm (with factory reset and necessary wipes of course)?
BTW, I have heard that knox is a security application that prohibits rooting on samsung phones. It also had a reward for $18k for those who can bypass the knox on the S5 and root it. If I am right, then I think I am fairly acquainted to knox.
Once again, thanks a lot for helping! Appreciate it
RazaVakil7995 said:
Wow that's a lot of info you provided there, thanks. I am not new to rooting as far it goes I have rooted and flashed many roms on my galaxy s advance and my micromax A87 before that. But note 2 was a flagship device so there are many complications that come along which got me confused. As for now, I have my rooted 4.1.2 stock rom along with cwm recovery flashed via rom manager. I am planning to flash either DN3 or the Xperia Z-ized rom. So my question is: do I have to flash mj5 bootloader to flash DN3 and xperia z-ized or can I directly flash it from cwm (with factory reset and necessary wipes of course)?
BTW, I have heard that knox is a security application that prohibits rooting on samsung phones. It also had a reward for $18k for those who can bypass the knox on the S5 and root it. If I am right, then I think I am fairly acquainted to knox.
Once again, thanks a lot for helping! Appreciate it
Click to expand...
Click to collapse
Since you are on stock 4.1.2 MJ5 is required for wifi to work.i learned 2 weeks ago that even mj5 is not required as previously thought by us at least not while flashing 4.4.2 TW rom.When you flash 4.4.2 custom ROM you wont have wifi working,then flash custom kernel like agni or nadia and wifi works flawlessly so one doesn't need to flash mj5 bootloader.I am not sure if this would work on 4.3 ROM you could try xperia z'd 4.3 custom ROM then flash a compatible 4.3 custom kernel and see if wifi works if it does you're set.This was new to most of us so I asked the person who told me about this how did he manage to do this and he told me apparently custom kernels have some sort of wifi drivers on them so when we flash custom kernels on 4.4.2 ROM wifi works but it wont work on stock kernel unless you upgrade to MJ5 and on stock kernel.MJ5 is safe to flash anyways since its knox free bootloader.
Actually 4.3 and 4.4.2 note 2 phones and others got knox on them but we found a way to disable knox after rooting our phone SuperSu disables it but knox is triggered to 0x1 and there's no way to reset KNOX since it's concerned with the motherboard of the phone which is the heart and soul of out note 2.So that bounty you might be talking about how to reset it perhaps.Even if they succeed in reversing it doesn't necessarily mean it would work on note 3 or note 2 cause of the phones being of different hardware .i don't know the technicalities of this.
singhpratik87 said:
Since you are on stock 4.1.2 MJ5 is required for wifi to work.i learned 2 weeks ago that even mj5 is not required as previously thought by us at least not while flashing 4.4.2 TW rom.When you flash 4.4.2 custom ROM you wont have wifi working,then flash custom kernel like agni or nadia and wifi works flawlessly so one doesn't need to flash mj5 bootloader.I am not sure if this would work on 4.3 ROM you could try xperia z'd 4.3 custom ROM then flash a compatible 4.3 custom kernel and see if wifi works if it does you're set.This was new to most of us so I asked the person who told me about this how did he manage to do this and he told me apparently custom kernels have some sort of wifi drivers on them so when we flash custom kernels on 4.4.2 ROM wifi works but it wont work on stock kernel unless you upgrade to MJ5 and on stock kernel.MJ5 is safe to flash anyways since its knox free bootloader.
Actually 4.3 and 4.4.2 note 2 phones and others got knox on them but we found a way to disable knox after rooting our phone SuperSu disables it but knox is triggered to 0x1 and there's no way to reset KNOX since it's concerned with the motherboard of the phone which is the heart and soul of out note 2.So that bounty you might be talking about how to reset it perhaps.Even if they succeed in reversing it doesn't necessarily mean it would work on note 3 or note 2 cause of the phones being of different hardware .i don't know the technicalities of this.
Click to expand...
Click to collapse
How do you know all this man??
RazaVakil7995 said:
How do you know all this man??
Click to expand...
Click to collapse
Lurking around in xda and reading as much as I can and participating in discussions related to Knox.I was clueless to all this Knox and how it works.My previous phone was HTC HD2 so samsung note II was the first serious smartphone I owned so just wanted to be extra careful that I don't end up bricking my device so read and read and asked questions.
Updating the Note 2 is so much more confusing then my old Atrix or Nexus 7.
Currently I'm running
Bell SGH-I317M
4.3 on MK5
Stock, rooted and Knox counter still at 0x0
No custom recovery
I'm looking to get to rooted stock 4.4 without flagging Knox.
Just looking for a brief explaination about the best way to go about it.
Do I need to update my bootloader first? Are there any images I can flash though Odin or do I have to install a custom reovery?
Thanks