I started off today with the stock ROM and wanted to get the Note 3 features. Ended up flashing the correct Ditto Note 3 4.3 ROM but went back to upgrade to the incorrect Ditto Note 3 4.4.1 ROM. The 4.4.1 ROM was the N7100 one. So as far as I can tell flashing that ROM only messed with my modem. Everything else is working fine after flashing back to he correct Ditto Note 3 ROM.
My problem is i cannot find the modem to flash back to so i can have cellular data again. If that is the correct diagnosis?
Any help appreciated.
I figured I'd add in these screen shots just in case they might help. I found the N7105 modem thread and tried all the modems with no luck. Not sure which direction to head in.
I think you will need to flash back to stock again first
Sent from my GT-N7105 using Tapatalk
Mootscicle said:
I started off today with the stock ROM and wanted to get the Note 3 features. Ended up flashing the correct Ditto Note 3 4.3 ROM but went back to upgrade to the incorrect Ditto Note 3 4.4.1 ROM. The 4.4.1 ROM was the N7100 one. So as far as I can tell flashing that ROM only messed with my modem. Everything else is working fine after flashing back to he correct Ditto Note 3 ROM.
My problem is i cannot find the modem to flash back to so i can have cellular data again. If that is the correct diagnosis?
Any help appreciated.
Click to expand...
Click to collapse
I am not sure that flashing modem will work, but yes that is the only diagnosis, other than that you need to flash to stock or rom built for your device.
Related
Hello I want to back to the stock mod but I already build the kitkat.
Can I go back to stock mod? Please help me!
also I found this rom
http://forum.xda-developers.com/showthread.php?t=2766242
but my phone is from at&t, can I install this?
please help me!
That is my Sprint port (StockMod kk) just repackaged for flashing in odin.
To your original question, if updated to kk firmware, you can still run all the roms as before. Just you can only use the 4.4.2 modem. Some 4.3 rom threads say to use the 4.3 modem, but ignore that if updated to the new firmware.
Thank you
DocHoliday77 said:
That is my Sprint port (StockMod kk) just repackaged for flashing in odin.
To your original question, if updated to kk firmware, you can still run all the roms as before. Just you can only use the 4.4.2 modem. Some 4.3 rom threads say to use the 4.3 modem, but ignore that if updated to the new firmware.
Click to expand...
Click to collapse
Thank you! so I can not use this mod ;(
yesterday I tried to back to stock mod but my phone hard bricked ;(
I tried some of image flash thing so get back to normal phone but still don't have imei or data
*sigh* I have to find fix shop
If you have got the phone booting again you don't need a fix shop. The imei problem is probably due to flashing back to mjb modem. See this thread: http://forum.xda-developers.com/showthread.php?p=53851558
Sent from my SAMSUNG-SGH-I747 running TMS3KK-1.1
I am running OmniRom 4.4.4 on my Canadian variant T889v. This rom didn't come with a modem and after install maintained the stock modem.
Wanted to install the DN3 rom, but wanted to make sure the rom came without a modem. However, read that a modem needs to be flashed after the rom. Where can I find the stock modem (Baseband T889VVLUDNE7). Or is there a way to install the rom without the need to install the modem like the OmniRom?
http://forum.xda-developers.com/showthread.php?t=2541860
I am relatively new to this process and frankly lucked out on the OmniRom. I did make a backup of stock rom from trwp before installing OmniRom. If I mess up the install on DN3 would I still be able to use restore to go back to stock?
update
Tried to install the rom using twrp. However, error right of the bat, saying it can't read the zip file. The zip file is not corrupted as far as I can tell.
I downloaded the file from the electron-team website for ROM_NOTE2LTE. (Sorry not allowed to post a link yet!)
I have DN3 installed right now and I love it. I come from a CM11 rom and before that the stock 4.3 TW with root. I didn't have to install anything extra and I've had almost no problems other than an occasional force close...
subaron said:
I am running OmniRom 4.4.4 on my Canadian variant T889v. This rom didn't come with a modem and after install maintained the stock modem.
Wanted to install the DN3 rom, but wanted to make sure the rom came without a modem. However, read that a modem needs to be flashed after the rom. Where can I find the stock modem (Baseband T889VVLUDNE7). Or is there a way to install the rom without the need to install the modem like the OmniRom?
http://forum.xda-developers.com/showthread.php?t=2541860
I am relatively new to this process and frankly lucked out on the OmniRom. I did make a backup of stock rom from trwp before installing OmniRom. If I mess up the install on DN3 would I still be able to use restore to go back to stock?
Click to expand...
Click to collapse
i also have t889v wind version and tried to flash the DN3 rom and had the same result as you, i got an error right of the bat saying the rom was not for my phone(or something like that). about the modem i believe DN3 does not come with a modem( it says so in the FAQ) so you should not have to worry about flashing modems with this rom. If there is anyone with a t889v that manage to get this rom on their phone it would be great if they could post what they did to get it to work.
droido101 said:
i also have t889v wind version and tried to flash the DN3 rom and had the same result as you, i got an error right of the bat saying the rom was not for my phone(or something like that). about the modem i believe DN3 does not come with a modem( it says so in the FAQ) so you should not have to worry about flashing modems with this rom. If there is anyone with a t889v that manage to get this rom on their phone it would be great if they could post what they did to get it to work.
Click to expand...
Click to collapse
I restored my phone to stock rom from the backup. Then I was able to install DN3. However, since I was just testing I did a dirty flash (no factory rest or data and cache wipe). I noticed the battery life was really bad and decided to do a clean install. After doing a factory reset in TWRP I tried installing it again and had the same issue as what I posted above.
Then I restored stock rom and tried clean install again and kept having the same issue as before. Was not able to install DN3 again!
I read somewhere on the forum that installing Agni kernel would likely solve the battery issue, but I can't test this until I can install the rom. I don't have a backup phone currently to mess around with testing to get the DN3 on. So if anyone has a fail proof method/steps of getting DN3 on please let me know.
Btw did anyone try the new T889V modem/rom (t889vvludnh2)?
http://forum.xda-developers.com/showpost.php?p=55867799&postcount=37
drmyndbender said:
I have DN3 installed right now and I love it. I come from a CM11 rom and before that the stock 4.3 TW with root. I didn't have to install anything extra and I've had almost no problems other than an occasional force close...
Click to expand...
Click to collapse
Do you have the T889 or the T889V from Canada?
T889 USA T-Mobile
drmyndbender said:
T889 USA T-Mobile
Click to expand...
Click to collapse
So you were able to install DN3 straight from a CM11 rom?
Did you use TWRP, CWM or PhillzRecovery?
I tried it with TWRP, maybe that's is why I am having issues installing it.
subaron said:
So you were able to install DN3 straight from a CM11 rom?
Did you use TWRP, CWM or PhillzRecovery?
I tried it with TWRP, maybe that's is why I am having issues installing it.
Click to expand...
Click to collapse
I used CWM. I had problems installing the ROM initially. I had to try a few times to get it to flash. Ive been using this ROM for a little while now with very few issues.
Dual booting
Hello,
Has anyone tried dual booting with this rom? I'm currently running Liquid Smooth on my T-Mobile Note 2 and I would like to run both roms. Please advise.
Just a quick question. Which aGNi kernel are you guys using with the T889v?
Is either of the following kernels safe to use with T889v, on either CM11 or Omni rom?
- PSN_AGNi_pureSTOCK-v4.3.3_R3_N7105_4.4.x_AROMA
- PSN_pureCM_11-12_ANYROM-AROMA-v2.9.1_R2_N7105_OC
subaron said:
Just a quick question. Which aGNi kernel are you guys using with the T889v?
Is either of the following kernels safe to use with T889v, on either CM11 or Omni rom?
- PSN_AGNi_pureSTOCK-v4.3.3_R3_N7105_4.4.x_AROMA
- PSN_pureCM_11-12_ANYROM-AROMA-v2.9.1_R2_N7105_OC
Click to expand...
Click to collapse
Hi i also had problems with latestzip. So i unstalled the one zip before the latest zip and it worked on my T889. Try that zip , it clmes with a final update.zip that you flash after the dn3 v5. Also there might be a specific build.prop for your phone thst would recomend. Sorry dont have specific names as im on my way to work.
Also both kernels you are didplaying are not for TouchWiz rom look for Agni kernal in the N7105 dev thrad. Ill add link as an edit before I loose all this. Also I wouldre comend installing will all default options first and no sound modification. Then dirty flash to customize and wait 10 minutes after first boot. Reboot and then set up you phone.
---------- Post added at 08:52 AM ---------- Previous post was at 08:39 AM ----------
pvaldeben said:
Hi i also had problems with latestzip. So i unstalled the one zip before the latest zip and it worked on my T889. Try that zip , it clmes with a final update.zip that you flash after the dn3 v5. Also there might be a specific build.prop for your phone thst would recomend. Sorry dont have specific names as im on my way to work.
Also both kernels you are didplaying are not for TouchWiz rom look for Agni kernal in the N7105 dev thrad. Ill add link as an edit before I loose all this. Also I wouldre comend installing will all default options first and no sound modification. Then dirty flash to customize and wait 10 minutes after first boot. Reboot and then set up you phone.
Click to expand...
Click to collapse
AGNI KERNEL LINK FOR TW sorry can past the link from dolfin browser it does a copy but not a past.
Correction use the first kernel the second one is nof non TW roms like slimkat, CW etc.
Hi everyone I hope this is not a repetition of some old thread (I tried but couldn't find though).
I was using my note 2 (T889) on stock 4.3 which i previously flashed via odine. A couple of days ago i came by this good looking kitkat based rom ( eZKAT v2.0 ) and went on to try it. the rom flashed flawlessly and after flashing my modem i got the signals as well but the wifi was not working. tried using dr. ketans wifi patch but didnt get the wifi to working. Anyhow, I decided to go back to 4.3 via odine. The odine flashing completed successfully but i got stuck on T-mobiles boot screen for hours.
Is there anything called "you cant go back to 4.3 from 4.4.2"? If yes, then whats the way around? I really need to go back to the stock.
Thanks.
zetrixNoob said:
Hi everyone I hope this is not a repetition of some old thread (I tried but couldn't find though).
I was using my note 2 (T889) on stock 4.3 which i previously flashed via odine. A couple of days ago i came by this good looking kitkat based rom ( eZKAT v2.0 ) and went on to try it. the rom flashed flawlessly and after flashing my modem i got the signals as well but the wifi was not working. tried using dr. ketans wifi patch but didnt get the wifi to working. Anyhow, I decided to go back to 4.3 via odine. The odine flashing completed successfully but i got stuck on T-mobiles boot screen for hours.
Is there anything called "you cant go back to 4.3 from 4.4.2"? If yes, then whats the way around? I really need to go back to the stock.
Thanks.
Click to expand...
Click to collapse
I had this problem on my Note also. Downgrading versions of Android requires a data wipe. You will need to reflash your 4.4 ROM then backup your data if you want. Save your backup to your computer then install the 4.3 image.
Sent from my Nexus 7
EverDawn4 said:
I had this problem on my Note also. Downgrading versions of Android requires a data wipe. You will need to reflash your 4.4 ROM then backup your data if you want. Save your backup to your computer then install the 4.3 image.
Sent from my Nexus 7
Click to expand...
Click to collapse
I already tried that but still the booting stuck on the t-mobile logo. I read somewhere that locked bootloader don't let you downgrade to previous version. Is this true?
In that case. Try finding a 4.3 rom that's close to stock.
Sent from my Nexus 7
The locked bootloader is always in stock firmwares i.e 4.3 for the Note 2 but not in custom roms meaning u can even install Lollipop custom on it & downgrade smoothly, i have done that many times. The problem is 4.3 stock firmware has locked bootloader hence downgrading still keeps u in 4.3 bootloader even if u remove all the KNOX files.
Stuck trying to downgrade from custom 5.1.1 to stock 4.3
Hi, i have a problem like this, upgrade to a custom 5.1.1 and then sell the phone, the new owner wants to have it stock, i try to downgrade to 4.3 but i cant, in odin i set the phone to flash it but seems like it doesn`t recognize the phone and i dont know why, so, i decided to try in recovery mode installing from the sd card but the sistem abort, so, i don`t know what to do, i`ll appreciates any help, sorry for my english, i do my best. (i have root access before upgrated to 5.1.1).
Good day Sirs,
I was successful in installing DN4 on my Note 2 Olleh but Baseband/IMEI is missing. I also cannot turn WiFi on. I also flashed SHV-E250K Stock Kernel, but it still doesn't work. Flashing with stock ROM, however, does restore the IMEI and Baseband. Did anybody here make it work? Thanks!
lexan102 said:
Good day Sirs,
I was successful in installing DN4 on my Note 2 Olleh but Baseband/IMEI is missing. I also cannot turn WiFi on. I also flashed SHV-E250K Stock Kernel, but it still doesn't work. Flashing with stock ROM, however, does restore the IMEI and Baseband. Did anybody here make it work? Thanks!
Click to expand...
Click to collapse
I'm pretty sure you can't install dn4 on your device with imei working. I'm sorry. I could be wrong though.
Hello I would appreciate any help with my device. The problem I am having is I can flash no touchwiz roms such as slimbean and CM11 but cannot flash stock non touchwiz roms. I would like to get wifi calling running but my phone just wont flash those roms. I am using the latest TWRP and my original rom was a 4.2.2 rom but it did not have the wifi calling option. I first encountered my problem when I got the phone and tried to root it and install a custom 4.4.2 rom. The flash failed and from there I was stuck on the Samsung logo. I tried to odin back to stock with the nb4, mk2 and mdl images but odin wil not let me flash it I get nand Write start FAIL error. Tried different odin's, cables, ports and still no go. I know I must be missing something but I have searched and searched and every post says it should be working. Please help.
current baseband M919UVUAMB2
current rom slimbean 4.4.4
What is the fail message when flashing the rom in recovery?
Are you sure you have a M919, and not a M919V phone?
Sent from M919V Galaxy S4 via XDA Premium HD app.
madman604 said:
Are you sure you have a M919, and not a M919V phone?
Sent from M919V Galaxy S4 via XDA Premium HD app.
Click to expand...
Click to collapse
it says m919 on the sticker how would I know for sure.
V stands for Virgin, talk dirty to it. if it blushes it's a virgin. Lol.
Look under the battery.
Pp.
punkhawaiian said:
Hello I would appreciate any help with my device. The problem I am having is I can flash no touchwiz roms such as slimbean and CM11 but cannot flash stock non touchwiz roms. I would like to get wifi calling running but my phone just wont flash those roms. I am using the latest TWRP and my original rom was a 4.2.2 rom but it did not have the wifi calling option. I first encountered my problem when I got the phone and tried to root it and install a custom 4.4.2 rom. The flash failed and from there I was stuck on the Samsung logo. I tried to odin back to stock with the nb4, mk2 and mdl images but odin wil not let me flash it I get nand Write start FAIL error. Tried different odin's, cables, ports and still no go. I know I must be missing something but I have searched and searched and every post says it should be working. Please help.
current baseband M919UVUAMB2
current rom slimbean 4.4.4
Click to expand...
Click to collapse
Your device is not really a m919....and honestly only mb2 firmware I've ever heard of was actually for the s3 not the s4...there's a bunch of these weird ass devices going around. Both m919 and i9505's. Let me guess you bought it on the Internet?
Thank You all as you suspected the phone was a fake luckily the seller is taking it back.