Related
So, after trying out a few firmwares (JM2, JG8, JM5) and kernels (Samset&OC) I can't no longer boot to recovery with Vol UP + Home + power. I can't really say when this problem first occurred, but maybe with JG8 flash. The strange thing is that I can get to recovery with adb reboot recovery and through android console with reboot recovery (when rooted ofc). Also download mode works great.
Things I have tried:
-flash again to JM2 and JM5 with re-partition checked (512 PIT)
-cleared cache+data through recovery
-factory reset through phone code (this also cleared the internal SD)
-took out the battery multiple times
-booted phone without sim
-flashed phone without sim
-changed CSC with phone code
-restore a nandroid backup of JM2. Recovery worked with this one when I took the backup
-there's no external flash card inserted
Soooo..does anyone have any idea about this kind of problem?
i had a similar problem after trying few ROMs. In my case, when i pres the key combi i get the boot logo and then few seconds later the screen goes black and then i see the boot logo again, and this goes forever. and then i tried pressing the same key combination simultaneously and once i see the boot logo i let go the power button and keep the vol up and home pressed, and then only it went into the recovery mode.
hope it works the same for you
Cheers
Agreed, 99.9% chance you are doing it wrong.
Sent from my GT-I9000 using XDA App
mmthabet: I had the exact same experience. Letting go of the power button when the logo appears lets me enter recovery.
or you may need to take out the battery first for a few seconds... after that, you can reinsert it back and try recovery mode...
at least this work for me...
Thanks for replies but none of the solutions work. The recovery mode button combination DID work for a few weeks, but then just stopped working.
I know that I'm doing it right. I have always pressed vol up and home down until the phone loaded recovery and only briefly pressed power button just at the start. I have also tried to remove battery multiple times and once waited 30 mins before re-inserting it.
Trust me, I'm not doing it wrong :s And recovery is working great through adb reboot recovery and shell.
Darkstriker said:
Agreed, 99.9% chance you are doing it wrong.
Click to expand...
Click to collapse
More so a timing issue. Buttons not pressed at the same time.
I get it all the time for all combo's.
Just keep trying.
You might already have this however just in case you dont, check out Quick Boot.
http://www.appbrain.com/app/com.siriusapplications.quickboot
With this app you can boot into recovery mode. Have to be rooted though.
odyssey61 said:
You might already have this however just in case you dont, check out Quick Boot.
http://www.appbrain.com/app/com.siriusapplications.quickboot
With this app you can boot into recovery mode. Have to be rooted though.
Click to expand...
Click to collapse
this wont work, if you bricked the phone in a bad flash situation.
in times when this app works, you can easily do adb reboot recover
so this app still doesn't address the real issue of how to get the 3 buttons press hardware recovery mode
Laum said:
I know that I'm doing it right. I have always pressed vol up and home down until the phone loaded recovery and only briefly pressed power button just at the start.
Click to expand...
Click to collapse
I release the buttons right when the first Samsung texts comes on the screen. It will take it to Recovery mode. I also had a "boot loop" few times, if I keep pressing the buttons all the time.
Have you tried release your fingers right in the first texts? I really don`t know what is exactly the right way to press the buttons, but this always have took it to Recovery.
Looks like my latest full wipe with *2767*3855# cured it. Flashed JM5-->full wipe-->samset1.9b-->samset kernel and now it works. It must've got stuck somehow in my previous JM5 installation.
I cant get into the download- or recovery-mode by using these keys... so i am not able to flash a new firmware! can anybody help me please? is there a chance to get into the download mode by using an adb-command?
please help i just cant get into the download mode!
Igor02 said:
I cant get into the download- or recovery-mode by using these keys... so i am not able to flash a new firmware! can anybody help me please? is there a chance to get into the download mode by using an adb-command?
please help i just cant get into the download mode!
Click to expand...
Click to collapse
yes
adb reboot download
but it is dangerous, as you can not recover from a bricked state, if your flash is not compatible or if something went wrong with odin, etc.
I you're bricked and can't get into Download or recovery mode, leave the device to boot, it will just show a black screen for a while then will turn its self off, once this happens you should be able to use the key combo.
arch3rm said:
I you're bricked and can't get into Download or recovery mode, leave the device to boot, it will just show a black screen for a while then will turn its self off, once this happens you should be able to use the key combo.
Click to expand...
Click to collapse
AHHHHHHHHH OMG, WHY DIDN'T YOU SAY THIS SOONER, like 5 hours ago...
i could have tried that, and not had to send my phone back for "repair"
well i'm sure i'll see that screen again in the future, i'll try that next time
AllGamer said:
AHHHHHHHHH OMG, WHY DIDN'T YOU SAY THIS SOONER, like 5 hours ago...
i could have tried that, and not had to send my phone back for "repair"
well i'm sure i'll see that screen again in the future, i'll try that next time
Click to expand...
Click to collapse
Well I did just get the phone 2 days ago,
Had that problem the same day, discovered the fix two hrs of horror later
Same Problem here i contact samsung here in mexico and a technical aggent tell me if we make a repair our phones we need a jtag and this is so bad alllready contact many people jtag manufacturers in china and honkong trow alibaba.com and no luck don't have other source i try is contact to nspro and z3x and no support for this repairand only hope still have is a reply from the people in the forum SMTi Jtag Repair Tool
Its hard to me go to UK Samsung Service Center i'm in mexico like i said
and i'm waith for a solve this i;m so very sad
http://www.youtube.com/watch?v=g8AIvalzBvY
Darkstriker said:
Agreed, 99.9% chance you are doing it wrong.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I usually release the power button on the boot screen first and then the other two buttons
arch3rm said:
I you're bricked and can't get into Download or recovery mode, leave the device to boot, it will just show a black screen for a while then will turn its self off, once this happens you should be able to use the key combo.
Click to expand...
Click to collapse
Any idea how long you waited? Been waiting 5 minutes, hasn't shut off. Mine's a Bell though so I'm guessing I won't have any luck.
The way i do it (no chance of doing it wrong and timing):
hold down+home and then also press the power button for a little more then 10 seconds (so all 3 buttons for 10 seconds). The phone will reset into download mode, never fails in whatever mode the phone originaly was..
I booted my phone into recovery mode with ClockworkMod Recovery, and when I got to the screen with all of the options, every option resulted in a blank black screen. Now I can't even reboot my phone. I have tried taking out the battery and retrying multiple times, but it just keeps coming back... Is there any way to fix this?
Do a search for odin. You'll be able to revert to a stock (unrooted) state. From there, you can start anew.
Good luck!
Sent from my fully armed and operational battle station
I thought this might be an option, will try it... However, if i'm not mistaken, odin requires you to boot the phone into the download mode (holding 1 and power button), but i am unable to do this. As soon as I put the battery in, it goes to the Clockwork screen.
Martinpibb22 said:
I thought this might be an option, will try it... However, if i'm not mistaken, odin requires you to boot the phone into the download mode (holding 1 and power button), but i am unable to do this. As soon as I put the battery in, it goes to the Clockwork screen.
Click to expand...
Click to collapse
Make sure you use the camera button to select an option in clockworkmod. If you press the home button I believe the screen turns black.
Hummm. is the battery the sole power source? (i.e., not charging or usb'd up)
Sent from my fully armed and operational battle station
jprocha101 said:
Make sure you use the camera button to select an option in clockworkmod. If you press the home button I believe the screen turns black.
Click to expand...
Click to collapse
Thank you, this worked!
Martinpibb22 said:
Thank you, this worked!
Click to expand...
Click to collapse
No problem. Make sure to click the Thanks button on my post
I have bricked my Motorola Defy.
I have tried flashing a new ROM using RSD Lite (following this guide). It says 'complete' but my phone will not turn on. Sometimes it will just show the Moto boot logo but never fully boot up. I can only open the boot menu.
The ROMs I have tried flashing can be found here (All UK 2.1 at the top of the page).
Background - I got into this mess by attempting to flash the Gingerbread UI ROM (here).
Does anyone have any ideas? I would really appreciated any suggestions.
Thank you.
Probably you have flashed a firmware which cannot be downgraded to eclair. Try to get again in the bootloader and flash a froyo build (the official french one, for instance).
Hope this helps
Sent from my MB525 using XDA App
but supposedly it is still an éclair ROM so it shouldn't be the reason... best thing would be to flash an original 2.1 rom, I'm sure you can find one on the development section. Make sure to have a fully charged battery though - charge it on someone else's phone, for example.
It's most likely a problem with cache. Power your phone with Volume Down holded, when in recovery press Volume Up + Down, clear data/factory reset, clear cache.
rafaccb said:
but supposedly it is still an éclair ROM so it shouldn't be the reason... best thing would be to flash an original 2.1 rom, I'm sure you can find one on the development section. Make sure to have a fully charged battery though - charge it on someone else's phone, for example.
Click to expand...
Click to collapse
Hi, thanks for the reply.
I have tried using the UK ROMs here: h**p:// and-developers. com/sbf:defy but none have worked. Any other suggestions?
Thank you.
antony.ps said:
It's most likely a problem with cache. Power your phone with Volume Down holded, when in recovery press Volume Up + Down, clear data/factory reset, clear cache.
Click to expand...
Click to collapse
Hey, unfortunately I cannot get into recovery, only the boot menu. Do you have any other suggestions?
Try flashing a JRDNEM_U3_2.59.0 sbf.
ABC_Universal said:
Try flashing a JRDNEM_U3_2.59.0 sbf.
Click to expand...
Click to collapse
Thanks, I will try now. Any particular country?
ABC_Universal said:
Try flashing a JRDNEM_U3_2.59.0 sbf.
Click to expand...
Click to collapse
Hey.
I have just tried this using the Australian version from here:h**p://and-developers.com/sbf%3adefy
Unfortunately, it did not work. I still cannot boot the phone.
Thanks for your advice, do you have any other ideas?
Have you tried one of the 2.51 version roms?
like JRDNEM_U3_2.51.1 Blur or
JRDNEM_U3_2.51.0 deblur.
Kaljam
kaljam said:
Have you tried one of the 2.51 version roms?
like JRDNEM_U3_2.51.1 Blur or
JRDNEM_U3_2.51.0 deblur.
Kaljam
Click to expand...
Click to collapse
Hi, yes I have tried the UK JRDNEM_U3_2.51.1 from here. Is that the same as blur or deblur?
Thanks.
Just an update...
All ROMS I have tried have installed OK through RSD Lite. The result is always 'Finished' or 'PASS'. But then when I try to turn my phone on, it never boots up.
I really appreciate the replies so far. If anyone has any further ideas, I would love to hear them.
Thank you.
UPDATE
I have just flashed the latest froyo leaked ROM as suggested around the net. Slight progress, the phone now boots to the moto boot logo but no further?
Does anyone have any ideas from here?
Thank you.
you do know that after flashing an sbf it takes a very LONG time to boot the first time! I just hope you are not giving up after a a couple minutes of M logo and pulling the battery or something it literally takes like 5 minutes.
You said you are still able to enter bootmenu? That is not possible after flashing an sbf, as it wipes the bootmenu away! Are you talking about bootloader?
Pull the battery and immediately put it back in while holding vol down. If the phone does not turn on just by inserting the battery then continue to hold vol down and press the power button for about 3 seconds, do not let go of vol down. Continue holding vol down until stock recovery appears.
Once you're in stock recovery press vol up AND vol down at the SAME TIME. Now use the volume toggle to select wipe date/factory reset, use the power button to make your selection, then wipe cache partition. Reboot
Walk away for like 5-10 minutes and check back on it.. Theres no reason it shouldn't work
zyxwvut said:
you do know that after flashing an sbf it takes a very LONG time to boot the first time! I just hope you are not giving up after a a couple minutes of M logo and pulling the battery or something it literally takes like 5 minutes.
You said you are still able to enter bootmenu? That is not possible after flashing an sbf, as it wipes the bootmenu away! Are you talking about bootloader?
Pull the battery and immediately put it back in while holding vol down. If the phone does not turn on just by inserting the battery then continue to hold vol down and press the power button for about 3 seconds, do not let go of vol down. Continue holding vol down until stock recovery appears.
Once you're in stock recovery press vol up AND vol down at the SAME TIME. Now use the volume toggle to select wipe date/factory reset, use the power button to make your selection, then wipe cache partition. Reboot
Walk away for like 5-10 minutes and check back on it.. Theres no reason it shouldn't work
Click to expand...
Click to collapse
Hey,
I have just got back from dropping of the phone with T-Mobile - Damm!!!!!!!
Thanks for the detailed explanation. I must have talking about the bootloader. Not the menu. I will head back to the shop in the morning and collect it back off them. Hopefully as it is a Saturday they have not sent it off?
Sooooo frustrating!!!!!!!!
I will update you when I have got it back and tested the above.
Thanks again,
Chris.
LOL I know what you mean... I had instant heart failure the first time I was stuck in a bootloop!!! Thought I wasted $400
I just panicked and gave up.. damm! Loads of people have said that its almost impossible to brick a defy. Fingers crosses thats true!! Lol
First, sorry for my english.
I have a similar problem. I flashed the official french froyo.
First it runs good. But today, two days later, the defy reseted automaticaly.
Several times.
Then I did a wipe. At the end the defy reseted automaticaly and stopped at the motorola logo. I flashed again. At the end of the flash, when RSD boots the defy, it stopped at the logo again. After...it must have been 15 minutes I pulled the battery and tried to get into the bootloader for a wipe.
But I can't enter the bootloader (vol up + power). The motorola logo appears and nothing happens. The last time I waited over 30 minutes.
OK, I have my phone back from T-Mobile...here it goes!!! (fingers crossed).
EDIT
Battery is out - will re-charge with the USB cable trick..
zyxwvut said:
you do know that after flashing an sbf it takes a very LONG time to boot the first time! I just hope you are not giving up after a a couple minutes of M logo and pulling the battery or something it literally takes like 5 minutes.
You said you are still able to enter bootmenu? That is not possible after flashing an sbf, as it wipes the bootmenu away! Are you talking about bootloader?
Pull the battery and immediately put it back in while holding vol down. If the phone does not turn on just by inserting the battery then continue to hold vol down and press the power button for about 3 seconds, do not let go of vol down. Continue holding vol down until stock recovery appears.
Once you're in stock recovery press vol up AND vol down at the SAME TIME. Now use the volume toggle to select wipe date/factory reset, use the power button to make your selection, then wipe cache partition. Reboot
Walk away for like 5-10 minutes and check back on it.. Theres no reason it shouldn't work
Click to expand...
Click to collapse
Hey, I am still have issues...
I have charged it up but cannot access recovery. I have tried taking out the battery and putting it back in while holding vol down but no luck. I have also tried holding the power button as well like you said.
I am going to leave it charging even longer to see if that helps.
So, I have an issue here.
I rooted my wifes phone awhile ago, and recently she has been complaining that she has bad battery life, phone freezing, etc , eyc.
So I figured I would change roms and update CWM.
I relashed this http://forum.xda-developers.com/showthread.php?t=1076967
and everything went fine.
Phone rebooted as if it was back at a default rom, but still rooted.
So I went through the phone setup and got it up and running.
I then put the updated ClockworkMod 3.1.0.1 PURPLE UPGRADE RFS/EXT4 file on my sd card and turned the phone off.
I tried booting the phone into recovery by using the 3 button method and now I am stuck on the black Samsung screen.
I pulled the battery numerous times and I cant get this thing to boot at all.
Someone please help as I am lost here.
Thank you.
Just odin back to stock ec05 and start fresh with one click root + cwm3.1.0.1......
Edit: unless you haven't made a band backup yet then you should try your best to boot up regularly and make a titanium backup
theduce102 said:
Just odin back to stock ec05 and start fresh with one click root + cwm3.1.0.1......
Edit: unless you haven't made a band backup yet then you should try your best to boot up regularly and make a titanium backup
Click to expand...
Click to collapse
Thanks....... Found a thread about using odin, and now have the phone back to default.
I guess I will go ahead and try this all over again.
Thanks for your help.
So, I ran the one click root method found here... http://forum.xda-developers.com/showthread.php?t=1076967
Everything went smooth.
Did all system updates, etc.
Phone was running just fine.
Now when I go to use the 3 button recovery method the phone stays put on the black samsung screen once again!
Cant even boot the phone normally now.
Why is the phone doing this?
This makes no sense at all.
Hmm..... try to flash a pre-rooted rom (like chris41g's ec05 plus rom) and then try to use the 3button method...... if this persists then you should probably stick to using quickboot to get into the recovery.....
Here's the link to the rom ---- http://forum.xda-developers.com/showthread.php?t=1061912
qbking77 knows what he's talking about..... check out his awesome vids on youtube if you ever need a visual aid when flashing =D
JuggZaPoppiN said:
So, I ran the one click root method found here... http://forum.xda-developers.com/showthread.php?t=1076967
Everything went smooth.
Did all system updates, etc.
Phone was running just fine.
Now when I go to use the 3 button recovery method the phone stays put on the black samsung screen once again!
Cant even boot the phone normally now.
Why is the phone doing this?
This makes no sense at all.
Click to expand...
Click to collapse
Yep happens to me as well..... Odin back to stock EC05 again and try a different cable.
If after Odin to stock and rooting you still have problems maybe it is the order you are pushing the buttons. Press and hold camera button first, then add pressing and holding volume down, then add pressing and holding power button, holding all three until the recovery menu comes up.
Hmm..... try to flash a pre-rooted rom (like chris41g's ec05 plus rom) and then try to use the 3button method...... if this persists then you should probably stick to using quickboot to get into the recovery.....
Here's the link to the rom ---- http://forum.xda-developers.com/show....php?t=1061912
Click to expand...
Click to collapse
Is quickboot the answer though.
Because if the phones battery dies, then I might be stuck again seeing it wont boot at all after I power it down.
I did odin it back to default as of now.
Yep happens to me as well..... Odin back to stock EC05 again and try a different cable.
Click to expand...
Click to collapse
Tried with a different cable, and still does the same thing.
If after Odin to stock and rooting you still have problems maybe it is the order you are pushing the buttons. Press and hold camera button first, then add pressing and holding volume down, then add pressing and holding power button, holding all three until the recovery menu comes up.
Click to expand...
Click to collapse
I thought maybe that was the issue as well, but I tried that over and over again with no luck at all.
Do you guys think maybe its related to the latest one click cwm method?
First off, I did do a search, but as far as I can tell no one has had this problem so far.
This is all after modding using a tool kit: (i can't include the url but it is the toolkit by neisor on the oneplus forums)
tldr: phone stuck in bootloop, computer wont recognize the phone, maybe because it keeps shutting off and then booting to the 1+ logo, then shutting off again, would drivers help? what can I do about the volume up button?
So for a while my volume up button hasn't been working, and the mega unbrick post shows that I need to hold the volume up button for at least 25 seconds and while holding, plug my phone in. I have also seen some posts that say the volume up button could be a software issue, and the button itself could be working, and it is just not registering, as well as someone saying that you could take the back off and manually press the button, instead of using the bar on the outside of the phone (would this work?). I have gotten the button to work in the past by pressing the volume up button to the side instead of straight in, but I haven't been able to get it to work since my phone got bricked.
Another issue: my phone is stuck in a boot loop, I can't access fastboot, and I'm unsure of recovery because my volume up button is not working. would it be worth it to deal with the constant vibrating to try to get it to recovery?
I have been able to shut the phone off by holding the power button for something like a minute and a half, though.
This is my first post, and if I have broken any rules I am very sorry, but I need help and am tired of not having a phone.
Thank you everyone,
Mark
Edit: this is what I did to root the phone:
1. download the toolkit
2. unlock bootloader (when fastbooting the phone said unlocked at the bottom, and a message about not being secure showed every time I rebooted the phone)
3. flashed twrp (no issues, still booted, recovery went to twrp. for some reason I had to flash multiple times as every now and then recovery would revert to stock op, although I did make a backup through twrp)
4. send supersu zip file to phone, install using twrp (phone would not boot, op logo stayed on phone for 2 hrs + until I rebooted to fastboot and tried to reinstall the backup I made, still nothing)
5. Try magisk (still stuck on op logo)
6. try to go back to stock, accidentally lock bootloader (now the phone is stuck in bootloop, don't know what to do from here as I cant get to fastboot and am unsure of recovery's accessibility.)
If you are sure you have a broken volume button, you need to replace it first in order to get the phone fix.
Correction:
Fastboot/bootloader = Power+Vol Up
Recovery = Power+Vol Down
This happened to me except I didn't even get anything appear on the screen -- the phone just periodically vibrated with the screen not even light up. I tried the reset toolkit which is meant to flash your phone back to normal using Qualcomm drivers or something, but that didn't work either. Eventually I had to send it to OnePlus who fixed it for free in under a week! They said the motherboard had failed.
I hope you get this fixed!
Thanks
150208 said:
If you are sure you have a broken volume button, you need to replace it first in order to get the phone fix.
Correction:
Fastboot/bootloader = Power+Vol Up
Recovery = Power+Vol Down
Click to expand...
Click to collapse
thanks for the correction, I will keep trying the volume buttons, if it doesn't work by the end of today I will search for a new volume button.
Thanks again,
mark
Ouch
badabdba said:
This happened to me except I didn't even get anything appear on the screen -- the phone just periodically vibrated with the screen not even light up. I tried the reset toolkit which is meant to flash your phone back to normal using Qualcomm drivers or something, but that didn't work either. Eventually I had to send it to OnePlus who fixed it for free in under a week! They said the motherboard had failed.
I hope you get this fixed!
Click to expand...
Click to collapse
Damn, that sucks, and besides being unfixable (doubt it), this is my biggest fear. I'm in the US and really don't want to have to ship my phone to china to have it fixed. If you are in the US as well do you know if there is a OnePlus branch I can send it to in the US?
Thank you,
Mark
MarkTheFur said:
Damn, that sucks, and besides being unfixable (doubt it), this is my biggest fear. I'm in the US and really don't want to have to ship my phone to china to have it fixed. If you are in the US as well do you know if there is a OnePlus branch I can send it to in the US?
Thank you,
Mark
Click to expand...
Click to collapse
There seems to be one in Texas. Anyway, contact OnePlus and they may try to solve it over the air.
Apart from that, did you install the Qualcom drivers properly? Even with your faulty power button, try to hold it down for 40+ seconds (for the phone to switch off) and then immediately hold down the volume up button for 10 seconds and then plug in the phone to the PC. I know I am merely repeating the instructions of Naman Bhalla in his Mega Unbrick Guide but it is crucial to do them correctly especially the installation of the drivers. Try these steps repeatedly because for some people, the phone gets recognised after repeated attempts. Or else replace the power button and then try these steps.
I had to use the Guide last month and successfully resurrected my dead phone.
MarkTheFur said:
... what can I do about the volume up button?
Click to expand...
Click to collapse
Can you boot into recovery by pressing power+volume down buttons?
Update: Got phone to show on computer as qualcomm under coms and ports
So last night I went ahead and held volume up for about 20 seconds, then plugged the phone in, keeping the volume up button pressed the entire time. my phone stopped bootlooping and showed up as a qualcom device! So I have downloaded the new driver the stock os, and am going to proceed to try to unbrick my phone.
Wish me luck,
Mark
Yes, I did, and its working so far
tnsmani said:
There seems to be one in Texas. Anyway, contact OnePlus and they may try to solve it over the air.
Apart from that, did you install the Qualcom drivers properly? Even with your faulty power button, try to hold it down for 40+ seconds (for the phone to switch off) and then immediately hold down the volume up button for 10 seconds and then plug in the phone to the PC. I know I am merely repeating the instructions of Naman Bhalla in his Mega Unbrick Guide but it is crucial to do them correctly especially the installation of the drivers. Try these steps repeatedly because for some people, the phone gets recognised after repeated attempts. Or else replace the power button and then try these steps.
I had to use the Guide last month and successfully resurrected my dead phone.
Click to expand...
Click to collapse
I still need to turn off the signed drivers features ( a huge bi*ch, I have to use another computer to contact microsoft or something to get my computer to load when I turn off safe boot or whatever its called), but once I do that I can install the driver and attempt to reinstall the stock os. Hopefully everything will go well.
Thank you,
Mark
Not as far as I know
rk2612 said:
Can you boot into recovery by pressing power+volume down buttons?
Click to expand...
Click to collapse
So far recovery has not been loading, just the bootloop, but I have gotten the phone to power off by pressing the power button for 40 seconds, and the volume up button plus plugging in does make the phone register as qualcom 9008 or something like that. Basically everything is going well so far, and the faulty vol button seems to have been a software bug, as it does work when plugging it in. I will try to get to fast boot, but it did not work last time.
Thank you,
Mark
MarkTheFur said:
So far recovery has not been loading, just the bootloop, but I have gotten the phone to power off by pressing the power button for 40 seconds, and the volume up button plus plugging in does make the phone register as qualcom 9008 or something like that. Basically everything is going well so far, and the faulty vol button seems to have been a software bug, as it does work when plugging it in. I will try to get to fast boot, but it did not work last time.
Thank you,
Mark
Click to expand...
Click to collapse
Glad to hear that there is some progress. Best of luck and keep us informed.