Related
I have a Samsung Galaxy Nexus GSM and have been trying to install the Paranoid Android flavor custom ROM, I had 2.22 installed not long ago but managed to screw it up when I updated it without clearing my security settings (I had a 4x4 pattern swipe which I couldn't enter with the update which restored it to 3x3 pattern) so I wiped and restored to stock 4.2. I'm now trying to re-install with any custom ROM but it's not working.
Whenever I install a ROM it seems to install ok but when I get to the boot screen it just hangs on the nexus/PA logo.
I've tried with:
Goo Manager
TWRP 2.2
TWRP 2.3
CWM 6.0.1.5
and with
PA 2.22
PA 2.99.1
PA 2.99.5
PA 2.99.6
PA 2.99.7
and I always get the same error, I've tried wiping all options within TWRP and CWM and going from there but that doesn't seem to work, the strange thing for me though is that if I re-install a stock Google ROM it works perfectly fine.
I'm fairly new so please be gentle.
flash the latest twrp and move the rom and gapps to your sdcard then follow this..
1. factory reset
2. wipe system
3. wipe cache
4. wipe dalvik
5. flash rom
6. flash gapps
7. reboot
if it still freezes at boot animation pull battery reboot to recovery wipe cache/dalvik and reboot
Thanks for the suggestion but that didn't work.
Any other suggestions?
When you say TWRP 2.3 do you mean 2.3.2.1? http://teamw.in/project/twrp2/90
Clockwork 6.0.1.5 is also outdated, newest is 6.0.1.9.
You need to update your recoveries for Android 4.2.X which is what PA 2.99 is based off of.
zephiK said:
When you say TWRP 2.3 do you mean 2.3.2.1?
Clockwork 6.0.1.5 is also outdated, newest is 6.0.1.9.
You need to update your recoveries for Android 4.2.X which is what PA 2.99 is based off of.
Click to expand...
Click to collapse
Yes I did mean 2.3.2.1, I wasn't sure what the whole version number was at the time and I was halfway through resetting up stock on my phone at the time so I didn't bother to check exactly. sorry about that.
Is there a way to completely wipe everything on the phone so that it is bare stock? I was just wondering if I would be able to start from a clean phone if it would make any difference. I'm aware of cache/delvik cache/internal storage/(i think it's called "system partition" or something like that).
Using TWRP, wiping cache, dalvik, and system should wipe everything except the sdcard contents. So doing these wipes should make your phone "bare stock" again as you described
Why don't you try downloading another custom ROM or download the same ROM again because maybe it is corrupted or something
osiris231 said:
Yes I did mean 2.3.2.1, I wasn't sure what the whole version number was at the time and I was halfway through resetting up stock on my phone at the time so I didn't bother to check exactly. sorry about that.
Is there a way to completely wipe everything on the phone so that it is bare stock? I was just wondering if I would be able to start from a clean phone if it would make any difference. I'm aware of cache/delvik cache/internal storage/(i think it's called "system partition" or something like that).
Click to expand...
Click to collapse
RANT: huh..... seriously? you couldn't have browsed around, searching for this COMMON issue (which usually comes down to user "error"), read the STICKIES, before posting?
first, internal storage = /data/media aka /storage/sdcard0/ aka /sdcard/
Please read all of this
http://forum.xda-developers.com/showthread.php?t=1626895
my s2 was being glitchy so i went into recovery to wipe cache and dalvik and then rebooted from recovery. i waited and then it just boooot loops and shuts off. im currently using cwm recovery 5.2.7 or something like that. will i be able to flash the newer roms like CyanogenMod 10.2 with that current recovery? and why did the wiping of cache and dalvik booot looped my phone? i thought wiping those just makes my phone less glitchy
You probably had some other issues to cause phone to be glitchy in the first place.
When flashing a new ROM it's recommend you wipe data, system cache and dalvik cache.(cache and dalvik can be wipe after the ROM install before rebooting)
nooob 4 ever said:
im currently using cwm recovery 5.2.7 or something like that. will i be able to flash the newer roms like CyanogenMod 10.2 with that current recovery?
Click to expand...
Click to collapse
No, you are going to have to update to either the newest TWRP or CWM to flash 4.3 ROMs.
I'm gonna jump in and hope this isn't a hijack. I had a similar experience but I wanted to update to the latest TWRP so I could flash a 4.3 ROM (Simbean) .
I Odined in and flashed TWRP 2.6.3. Was able to flash the Slimbean ROM but on first reboot I can't make it past the Samsung screen.
I can get back into TWRP but everything fails. - typical process. "Fix permissions- Success", then "Full wipe - Success" then "Fix permissions (cause I'm trying anything at this point)- Failed"
In TWRP Restoring backups "Failed" Flashing new image "Failed" In between I've tried Erasing everything but the MicroSD card and starting fresh but Noting will install.
I've reflashed TWRP through ODIN but same issue. A couple of times I've got a restore to work but if the phone sleeps it won't wake up. I can only get back to TWRP.
What is the Nuclear Option? Or have I done that already? I've been flashing for years. I've never seen anything like this.
Help.
pairustwo said:
In TWRP Restoring backups "Failed" Flashing new image "Failed" In between I've tried Erasing everything but the MicroSD card and starting fresh but Noting will install.
I've reflashed TWRP through ODIN but same issue. A couple of times I've got a restore to work but if the phone sleeps it won't wake up. I can only get back to TWRP.
What is the Nuclear Option? Or have I done that already? I've been flashing for years. I've never seen anything like this.
Help.
Click to expand...
Click to collapse
Some people have problems with 2.6.3.0. Try to Odin 2.6.1.0 and see if it helps.
http://techerrata.com/browse/twrp2/hercules
help
so what are my options to fix my phone with the current cwm 5.0.27?
nooob 4 ever said:
so what are my options to fix my phone with the current cwm 5.0.27?
Click to expand...
Click to collapse
i can get into cwm and thats it
nooob 4 ever said:
i can get into cwm and thats it
Click to expand...
Click to collapse
Nothing, that recovery is good for 4.1.2 and lower, of u want newer roms u can go to my beanstalk thread or @ThdDude's hellybean thread and the new recoveries are posted...
Sent from a soup'd up Herc while climbing a giant beanstalk to crazy heights.....
what I did is to hold the power button/ remove the battery of your phone. Open it again and wait for it to start. no bootloop.
Is anyone having an issue with the new D2LTE builds that have been built recently?
I have tried to flash a few (carbon and c-rom) and just get stuck at kernel splash page. I am on the newest TWRP(2.7), the lk3 modem/bootloader and wiped data,cache, dalvik, and reformatted my internal sd card.
If anyone else is experiencing this, what was done to resolve it?
Edit: I have now also tried
1. Restoring to original stock touchwiz 4.1.1
2. Wiping cache from original recovery
3.Rerooting
4.Restoring a backup of 4.3
5.Attempted to update to C-Rom, Carbonrom, Resurrection Remix -- No Luck Fails
Corvetrims77 said:
Is anyone having an issue with the new D2LTE builds that have been built recently?
I have tried to flash a few (carbon and c-rom) and just get stuck at kernel splash page. I am on the newest TWRP(2.7), the lk3 modem/bootloader and wiped data,cache, dalvik, and reformatted my internal sd card.
If anyone else is experiencing this, what was done to resolve it?
Click to expand...
Click to collapse
I'd like to know myself. I'm stuck too. I can flash a 4.3 rom and everything works, but when I reboot, it gets stuck. All was fine until I flashed Wicked rom and flashed " MJ2 bootloader MJB" Now every time I reboot it gets stuck. Also If I try a reflash, the only way to get it to bootup is to format before flashing.
Try using Philz Touch as your recovery program.
audit13 said:
Try using Philz Touch as your recovery program.
Click to expand...
Click to collapse
I had cwm when I originally started out, switched to twrp to see if the recovery was the issue.
I assume you were running the latest version of cwm before you switched to twrp so it can't be the recovery.
Are you doing a full wipe of the system, cache, data, and Dalvik before installing the ROM?
Yea every time I wiped data, cache, dalvik , I even reformatted once. I have managed to boot up into tasl650AOKP which is a d2lte build but no other ROMs. I mean at this point it looks like I should just wait a bit to see if it is something with the ROMs interacting with my phone(as per all phones are made different)
Sent from my d2lte using Tapatalk
Are you wiping the system before installing? Have you tried wiping system, dalvik, data, cache, install the rom, wipe and re-install the same ROM a second time without trying to boot the ROM in between the 1st and 2nd ROM install?
audit13 said:
Are you wiping the system before installing? Have you tried wiping system, dalvik, data, cache, install the rom, wipe and re-install the same ROM a second time without trying to boot the ROM in between the 1st and 2nd ROM install?
Click to expand...
Click to collapse
Yeah I gave it a shot still no dice. I keep seeing other people having similar issues, so I am still leaning it has to do with the differences in d2lte builds vs dtatt builds
Sent from my d2lte using Tapatalk
d2att ROMs are okay? Just not any d2lte?
audit13 said:
d2att ROMs are okay? Just not any d2lte?
Click to expand...
Click to collapse
As I stated before I am able to boot int Task650AOKP(Which is a d2lte build), any of the others that I have tried have not worked. There are some updates out today, I am going to attempt again and post back results.
As a test, I flashed my i747m back to stock 4.1.2 via Odin. I then installed the latest version of Philz Touch for the d2lte and installed the d2lte version of Validus. Validus booted without any problems.
Edit: just tried the lastest nightly Pac-Rom and Resurrection ROM. Both ROMs had no problem booting to the desktop.
audit13 said:
As a test, I flashed my i747m back to stock 4.1.2 via Odin. I then installed the latest version of Philz Touch for the d2lte and installed the d2lte version of Validus. Validus booted without any problems.
Edit: just tried the lastest nightly Pac-Rom and Resurrection ROM. Both ROMs had no problem booting to the desktop.
Click to expand...
Click to collapse
Thanks for the help, I actually was just able to boot into C-Rom by following the same steps except I am using TWRP. No idea really what caused the Roms to get stuck on boot. Quite annoying.
I had TWRP on my phone but I was having problems installing ROMs when I first got the phone in January.As soon as I switched to CWM or Philz, no problems at all except for ROMs based on a stock 4.3 ROM.
Hi, I'm on the 4.4.2 version of the Sickness, with the MDL bootloader. I've updated the modem to NH7.
Do I need to go through the whole process of updating the firmware, re-rooting, etc., or can I just do a full wipe and update to the Sickness' 4.4.4 V3?
I tried a full wipe and installing it today, but I ran into bootloops/other failures.
its better to use the latest recovery like twrp becuz in twrp 2.8.0.1 which is the latest recovery you can choose wipe and then advance wipe and choose dalvik cache,system,data and cache then wipe and that normally takes care of the boot loops
rblckmnjr84 said:
its better to use the latest recovery like twrp becuz in twrp 2.8.0.1 which is the latest recovery you can choose wipe and then advance wipe and choose dalvik cache,system,data and cache then wipe and that normally takes care of the boot loops
Click to expand...
Click to collapse
CWM and Philz also allow you to wipe system, data, cache, and even the non-existent Dalvik cache partition.... Your post makes it sound like TWRP is the only recovery that does that Just saying..
jonnyboy2040 said:
Hi, I'm on the 4.4.2 version of the Sickness, with the MDL bootloader. I've updated the modem to NH7.
Do I need to go through the whole process of updating the firmware, re-rooting, etc., or can I just do a full wipe and update to the Sickness' 4.4.4 V3?
I tried a full wipe and installing it today, but I ran into bootloops/other failures.
Click to expand...
Click to collapse
As to your question; you should be able to do a full wipe (system/data/cache and even though it literally does nothing because the partition doesn't exist, dalvik) and then flash with no problems. I would say that since you're still one of us few lucky ones still with MDL bootloaders, try to keep an official update as a very last option!
Were you trying to flash a kernel or any other mods along with the ROM? If so, flash only the ROM itself and see how it works.
You say bootloops/other failures... that means you bootloop a lot, and when you don't bootloop something else happens. Could you be more specific on the "other failures?" Any error messages? Were you able to pull a logcat? Did you compare the MD5's? Doesn't sound like a bad download, but you never know...
i understand what you saying however i ran into the same problem using philz touch and got the latest twrp and havent got stuck in boot loops since i read a forum on this and using older recovery to flash kitkat roms has been having people phones stuck in a boot loop and throwing errors after flashing and they updated the recovery to fix it
Sh*t, I have TWRP 2.6 and never have a problem. IMO (and some others) newer versions don't seem to play well with others. That goes for all Recoveries.
As for your issue, you might have a bad DO. Try re downloading the ROM, full wipe and then flash.
well my phone didn't like philz touch it works better with the latest twrp recovery
I actually ran into this last night with philz.. I tried flashing insane 4.4.4 v3 and got stuck in a bootlooop I couldn't recover from. It flashed v1 just fine, but it just wasn't having any of v3. I had to use Odin to flash the latest TWRP and have had no problems.... :/
lordcheeto03 said:
I actually ran into this last night with philz.. I tried flashing insane 4.4.4 v3 and got stuck in a bootlooop I couldn't recover from. It flashed v1 just fine, but it just wasn't having any of v3. I had to use Odin to flash the latest TWRP and have had no problems.... :/
Click to expand...
Click to collapse
Sickness mentioned something about a script that was causing bootlegs when flashing
After flashing TWRP with Odin, I boot into recovery and wipe the dalvik cache. I then go to install the CM13 zip file, and it works. I wipe Dalvik again and reboot in the os. This is where it just shows the CM boot screen infinitely. Nothing else. What is up. I am using the latest TWRP and CM13 release.
Try this:
1. Wipe cache, dalvic cache, data, system
2. Install CM13 again, along with your gapps(google apps if you didn't know, custom ROMs never come with them, optional)
3. Boot it, it should work
You cannot switch ROMs without wiping data. Bad things happen.
You must clean flash when:
1. Switching between a stock ROM to a custom ROM
2. Downgrading Android versions (5.1 to 5.0)
3. Switching custom ROMs (I.E. CM13 to AICP)
4. When the ROM's thread warns to (switching keys)
5. Switching between nightly builds and stable.
When you're updating nightlies, you shouldn't have to though.
RDChase said:
Try this:
1. Wipe cache, dalvic cache, data, system
2. Install CM13 again, along with your gapps(google apps if you didn't know, custom ROMs never come with them, optional)
3. Boot it, it should work
You cannot switch ROMs without wiping data. Bad things happen.
You must clean flash when:
1. Switching between a stock ROM to a custom ROM
2. Downgrading Android versions (5.1 to 5.0)
3. Switching custom ROMs (I.E. CM13 to AICP)
4. When the ROM's thread warns to (switching keys)
5. Switching between nightly builds and stable.
When you're updating nightlies, you shouldn't have to though.
Click to expand...
Click to collapse
Just did it, it still seems to be booting like it previously was. Wiped cache, dalvic, data, and system and then installed CM13 and gapps. Still booting as I write this.
Since that failed, check your download, make sure nothings bad. If its bad, redownload, if not, idk.
If you post your recovery logs, or what the console says, that will help me figure out what's going on.
Also, is your phone the triband model (l710t)?
Are you flashing anything else at the same time?
The more info you give, the better.
RDChase said:
Since that failed, check your download, make sure nothings bad. If its bad, redownload, if not, idk.
If you post your recovery logs, or what the console says, that will help me figure out what's going on.
Also, is your phone the triband model (l710t)?
Are you flashing anything else at the same time?
The more info you give, the better.
Click to expand...
Click to collapse
I've kind of given up at this point. Even CM12 doesn't work. The only thing that seems to work is the stock rom. My phone is the regular SPH-L710 model. I didn't even know the L710t was a thing.
I have the same problem, and sometimes it boot in the system setup mode, but the sensor is not working, i can turn on airplane mode, reboot or power off, and sensor works, what happend i dont know((
ovil101 said:
After flashing TWRP with Odin, I boot into recovery and wipe the dalvik cache. I then go to install the CM13 zip file, and it works. I wipe Dalvik again and reboot in the os. This is where it just shows the CM boot screen infinitely. Nothing else. What is up. I am using the latest TWRP and CM13 release.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2755793
helped)))
1vankill1 said:
http://forum.xda-developers.com/showthread.php?t=2755793
helped)))
Click to expand...
Click to collapse
That just seems to be a stock rom.
yes it stock rom, after it was installed, I was able to install 13 cm