Develop Bugs

[Q] CWM recovery Incomplete phone restarts

Hello all, my First post so please bear with me, Been using these forums for quite a while and all answers have been allready given, so no need to post... till now.
I have a Samsung Galaxy s3 i747 running android 4.1.2 OTA update and used CF-Autoroot. No problems there,
installed Rom manager, and cwm recovery touch. no problem
When I restart in recovery mode, also everything seems fine...
When I try to backup the phone however using cwm recovery it starts backing up everything including system but the just as it starts data the phone restarts.
Tried reinstalling cwm over and over different versions.. nada same result..
went into the settings to mount the various options as suggested to another user. same problem nada...
To be completely clear, I am trying to make a backup of my stock / rooted only Galaxy s3 i747 onto it's own storage NOT SDcard.
as I also could not figure that out either.
Any help would be greatly appreciated. -Erdericks1976
Sorry about misleading Subject. This is about making my first backup successfully..

Followup.
Well seems there are/were more problems here than I thought, it has begun randomly? restarting,..
Well. not Ramdomly. Whem specific apps are run it would restart.
I did a titanium backup and it would backup alot of the apps. but them would restart the phone when it got to 1 specific app.
I think I figured out what I did wrong here.
I have a Galaxy Note 2, and I may have flashed something from it by mistake......
so I have restarted my Gs3 From scratch Re-Following all instructions.. waiting to test and see if CWM works to back it up now..
It sure was faster with the Note2 rooted Kernel though. (if that was in fact what happend)
I'll update soon as its done..

Followup 2
Yep. that musta been it. Used the correct stock (rooted) Rom
OTA updated from 4.1.1 to 4.1.2, then used CF auto root to Re-root, then reinstalled SU and CWM and Backing up now.
Just passed the Data section the phone would always restart at...

Erdericks1976 said:
Yep. that musta been it. Used the correct stock (rooted) Rom
OTA updated from 4.1.1 to 4.1.2, then used CF auto root to Re-root, then reinstalled SU and CWM and Backing up now.
Just passed the Data section the phone would always restart at...
Click to expand...
Click to collapse
good for you, yu got it solved fast and easier than expected, XDA is your place for Android and root but also every kind of OS there is
anywz am not that old in XDA i joined in April and officially started rooting and modifying my phone since May and it has been great, bricked my phone 1st time but all in all i got the S3 in case for the loss. yu'll get used to this place and ROOT/custom roms

[Q] Lost root, won't come back

So I'm not a complete and utter n00b here, as I've been rooting and installing CM for at least three years now on several different phones. But this problem vexes me...
Patient: SIII, formerly rooted and running CM10.1 just fine. A few weeks ago, I tried to install a 10.2 stable build, and it somehow took my root away. I tried every trick I knew how - installing the root files via Odin (many versions), via ADB, via Kingo Root...nothing. Absolutely nothing I try will get this thing to give me my root back, and the ads are starting to really get on my nerves.
My ticker says 15 attempted installs, but I don't think it's blocking me from rooting...is it? All the phones I've rooted I've never had a problem like this, where absolutely nothing will allow root to "take", such as it is.
Any thoughts or suggestions?
Thanks!

Wow, nothing? I figured someone would at least sigh heavily, berate me for not reading the forums completely, then point me to a thread where this has been discussed ad nauseum
Last night, I tried rooting with TWRP, CWM, every variant and trick I could find to get this thing to root for me, and while these things all seem to load fine, none of them give me my root access back. No one has any ideas?
Thanks!

help
im using rooted 4.3 stock rom in t999..
everytime i boot into recovery it says "fixed root"
any solve for this?????

Did you dirty flash CM10.2 over CM10.1? if so, it might have failed to write the partition completely/correctly. I would suggest to backup everything that you can (adb backup or similar) and then wipe everything then reflash fresh CM10.2.0 + GApps + SuperSU or Koush's Superuser flashable zip.

[Q] sprint gs3 wont boot into twrp

What's up guys!
Using ROM installer I flashed vanir 4.4 along with 4.4 gapps on my sprint gs3 sph l710. I wiped the cache and it looked as if it were installing fine but winded up getting stuck in boot loop mode instead. Now when I try to boot into recovery the twrp screen flashes and then it goes straight into bootlop mode from there. Now i cant acsess any of my backups. I can get into down load mode but unfortunately my computers messed up right now. I can't hit the run button on Odin because the screen is too big. I know it sucks!!! Does anyone know some tricks I can use or have any recommendations. Your help would be greatly appreciated! BTW.. I was running illusion 4.3 when this happened.

ddray said:
What's up guys!
Using ROM installer I flashed vanir 4.4 along with 4.4 gapps on my sprint gs3 sph l710. I wiped the cache and it looked as if it were installing fine but winded up getting stuck in boot loop mode instead. Now when I try to boot into recovery the twrp screen flashes and then it goes straight into bootlop mode from there. Now i cant acsess any of my backups. I can get into down load mode but unfortunately my computers messed up right now. I can't hit the run button on Odin because the screen is too big. I know it sucks!!! Does anyone know some tricks I can use or have any recommendations. Your help would be greatly appreciated! BTW.. I was running illusion 4.3 when this happened.
Click to expand...
Click to collapse
Can you try using this? http://forum.xda-developers.com/showthread.php?t=1746680
Maybe that'll work, you can use it to return to stock, and if anything I would recommend going back to stock before doing anything else. Also, it may not be the consensus of the site here but in my own opinion, I don't like using rom installer or goo manager or anything. I like doing it all myself in recovery. I've heard one too many stories of people getting hardbricked because their rom installer or whatever downloaded the international version of the rom they wanted :/ always best to check your own md5 checksums and make sure you're downloading the rom for your phone from your phone's forum.
As for the exact reason your phone did that? I couldn't tell you, maybe with a little more info someone more knowledgeable here could tell you

So i got my computer fixed. I havent tried the tool kit in the thread you recommeded. I decided first to use a stock file i have on odin first that has saved me from softbricks in the past. I set everything up hit start, watched the process complete with the pass. Now it shows the stock boot animation but still stuck in bootloop mode. I put it into recovery,which is now stock instead of twrp, wiped cache, davlik cache and factory reset then i reconnected to odin and reflashed the stock file. Still stuck in bootloop mode!!!! Plain reboot and same thing :/ so for the hell of it, i wanted to see if i can to my backups by restoring twrp. So i flashed my cf auto root and then flashed my twrp file and bam!!!! Twrp was full functioning with all my backups!!! :laugh: next i restored my latest illusion 4.3 rom and wala! Ive got a fully functioning rooted phone with a custom rom. I flipped through everything to make sure it looks good and it does. Except.... any photos and music that are saved to phone and not sd card are gone I dont understand, everthing else is backed. Contacts, call logs, messages, text messages, apps, customised settings etc...I even flashed my carbon rom that had the same music and pics. When i open gallery it shows the photo count in snapseed and others im looking for but then they all start dissapearing!!! i also dont understand why the stock file which has saved me from softbricks before didnt work. I dont know anything about checking md 5 checksums but if its worth the time ill do my research! Im happy i got my phone working but i would like to be more solid in what im doing. Maybe someone can help shed some light on this.

Tried rooting S3, didn't work, need help.

I am very new at this, so I apologize in advance. I have the Virgin Mobile Galaxy S3 SPH-L710 running 4.3.
I simply wanted to root it so i could get rid of the bloatware and install Sixaxis and play emulators, but I didn't really know where to start, so I started looking around and found this
http://forum.xda-developers.com/showthread.php?t=2546505
So I basically did everything on there. I used Odin to install PhilZ Touch 6 Recovery (CWM 6.0.4.7) Did factory reset, wiped cache/dalvik. then installed the Odexed MK5 stock rooted zip, wifi fix zip, SuperSU update zip, and then the knox app remover zip.
Everything flashed just fine and it started right up. It had the Super Su app, but when I tried to install apps that need root permission it would say I don't have root access. I couldn't delete bloat apps and Super Su didn't show any apps and there isn't much I can do with it. So I guess it didn't work? Either way I wanted to try a different rom. Was gonna give Cyanogenmod a try. But every time I try to install it I get the little "Android bot laying on his back" thing and it says status 7. I tried to flash CM10, CM10.1, CM10.2, CM11. Nothing worked, same thing every time. Even tried different SD cards just in case of a mess up.
The phone itself works fine for now, calls and text work, wifi works. And it says there is an update, but when i hit accept, it reboots to recovery mode, does the "android fallen over" then boots back up.
Now here is my stupid part, I didn't backup the original cause the guide didn't say to. (Not blaming them, i should have know better) So I am assuming I have a messed up version of 4.3 and Cyanogenmod doesn't know what to do with me. I'm not sure. Here is where I am stumped and I have no idea where to go from here.
I posted this by accident in the wrong forum here
http://forum.xda-developers.com/galaxy-s3/help/tried-rooting-s3-didnt-help-t2879278
But someone decided to help me anyways (thank you so much). They said all i need to do is update my recovery. so I went here
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
And now I am running PhilZ 6.48.4, but I am still getting status 7 when I try to install CM11. I have tried CM10, CM10.1, CM10.2 and CM10.2.1 as well. I have been at this for days and i am going crazy because nothing I do seems to work. Does anyone have any idea what is wrong with my phone? Thank you so much in advance.

Mumonk said:
I am very new at this, so I apologize in advance. I have the Virgin Mobile Galaxy S3 SPH-L710 running 4.3.
I simply wanted to root it so i could get rid of the bloatware and install Sixaxis and play emulators, but I didn't really know where to start, so I started looking around and found this
http://forum.xda-developers.com/showthread.php?t=2546505
So I basically did everything on there. I used Odin to install PhilZ Touch 6 Recovery (CWM 6.0.4.7) Did factory reset, wiped cache/dalvik. then installed the Odexed MK5 stock rooted zip, wifi fix zip, SuperSU update zip, and then the knox app remover zip.
Everything flashed just fine and it started right up. It had the Super Su app, but when I tried to install apps that need root permission it would say I don't have root access. I couldn't delete bloat apps and Super Su didn't show any apps and there isn't much I can do with it. So I guess it didn't work? Either way I wanted to try a different rom. Was gonna give Cyanogenmod a try. But every time I try to install it I get the little "Android bot laying on his back" thing and it says status 7. I tried to flash CM10, CM10.1, CM10.2, CM11. Nothing worked, same thing every time. Even tried different SD cards just in case of a mess up.
The phone itself works fine for now, calls and text work, wifi works. And it says there is an update, but when i hit accept, it reboots to recovery mode, does the "android fallen over" then boots back up.
Now here is my stupid part, I didn't backup the original cause the guide didn't say to. (Not blaming them, i should have know better) So I am assuming I have a messed up version of 4.3 and Cyanogenmod doesn't know what to do with me. I'm not sure. Here is where I am stumped and I have no idea where to go from here.
I posted this by accident in the wrong forum here
http://forum.xda-developers.com/galaxy-s3/help/tried-rooting-s3-didnt-help-t2879278
But someone decided to help me anyways (thank you so much). They said all i need to do is update my recovery. so I went here
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
And now I am running PhilZ 6.48.4, but I am still getting status 7 when I try to install CM11. I have tried CM10, CM10.1, CM10.2 and CM10.2.1 as well. I have been at this for days and i am going crazy because nothing I do seems to work. Does anyone have any idea what is wrong with my phone? Thank you so much in advance.
Click to expand...
Click to collapse
only thing i can think of Is Odin the stock rom and start all over with trying to root......

I don't know how to explain it, but now everything is working perfectly....
I went back to the first site I posted about, Redownloaded everything, did the whole thing over, and root worked just fine. So I thought I would try my luck with CM11 and BOOM, working perfectly.
I have been tearing my hair out trying to get this to work for days and days and now, poof, it's all working. I dunno how, but I will take it. Thanks for the advice in both threads.

Mumonk said:
I don't know how to explain it, but now everything is working perfectly....
I went back to the first site I posted about, Redownloaded everything, did the whole thing over, and root worked just fine. So I thought I would try my luck with CM11 and BOOM, working perfectly.
I have been tearing my hair out trying to get this to work for days and days and now, poof, it's all working. I dunno how, but I will take it. Thanks for the advice in both threads.
Click to expand...
Click to collapse
Get towelroot, is an apk that root your phone with one click, after that just download your favorite super user from the market and done.

Towel Root(TR) and Rooting in not one click but 2 Clicks

First of all I want to thank all the developers on this and all forums, I hope that you prosper in your endeavers...
I have been at this since the sprint mogul came out. Playing around with PPC kitchen and technology keeps getting more 'interesting'...During the s3 root procedure I was fascinated with the Knox and how it was dealt with automatically with Supersu, and how cwm took control of keeping itself as the recovery as well as offering to keep root(such manners!)...
Check your Version # this how to is meant for 4.2.2 ONLY
I believe there was just an update(cause my phone downloaded it and wanted to install) I knew it was time to root again.
This summer I finally upgraded from my beloved Galaxy s1... After many a rom it was victim of a glass of water
spill...Bought a s3 sph-d710 for cheap and have been loving the phone but missing my wifi teather(and text to speech
prowess, why does the s3 stock suck worse than s1 cyanogen 10.2?) so I know I must root.
OOps my volume UP button is
broken! How to I get to downoad mode? to use ODIN! Gueess I gotta Root on the Phone...
ABD? Tried finding the tiny version of abd but after failed downloads and searching for links for the tiny version were
broken so...instead I Installed towel root and followed the guide here
http://gs3.wonderhowto.com/how-to/easiest-one-click-root-method-for-your-samsung-galaxy-s3-0155625/
It was so amazingly easy(you download towelR touch the red Icon or one of the donate links in TR), wait 20 second click make it rain, wait 20 seconds then check with saferoot...(after installing it @ goo.im)! After TR immediately without rebooting install #saferoot(do not attempt to get root with this just install), and install CWM recovery which I did thru rom manager(via google play, I attempted to install from their site but it was a zip and it did not jive with my unpackaging skillsEDIT Drr it was prolly for cwm?). Safe root does something for SuperSU so that it will not hang while removing knox( wait 5 min if it seems to hang then force quit and u prolly did not install saferoot yet so do that and try again)
(EDIT: be sure and install safe root (FROM GOO.IM)after you make it rain with TR and then you install supersu & rom manager.Also Install towelroot and Supersu from their perspective verified real web page not other sources/googleplay) I was freezing at chainfires supersu install after making it rain)but once saferoot is installed it will disable knox(noted above)
I then took out Knox with Supersu simply by opening the program(it will ask you if you want to kill Knox) also it will ask to
update everytime.
Then I Installed the 4g and hotspot fix via CWM recovery via Rom Manager reboot into recovery and I was fully functioning..done! ND8Oxed 4.4.2..
http://forum.xda-developers.com/showthread.php?t=2224083
I Used this post below as a general guide Hope this helps some, click thanks if I did..thanks all!
Happy Camper (rooted, tethered sprint galaxy s3)
Finally, I got my Sprint S3 tether working.
Many thanks to both bilgerryan and jdsingle76.
So just to help out other noob out there, what I did was:
1. root the S3. www idigitaltimes com/samsung-galaxy-s3-android-442-kitkat-update-how-root-sprint-sph-l710-variant-and-install-custom-roms
(Sorry I am not allowed to post links yet)
2. Install a custom recovery. I did not use Philz. I am sure it must be very good. However, I am not very good at using
Odin yet. I used CWM. Installed it directly from play store. There are lots of youtube videos on how to do it.
3. copy the Hotspot ROM zip file to the SD card in the phone. In my case, the ROM is the ND8 odexing version
4. Back up my stock rom (rooted) with the CWM recovery, in case something goes wrong. Lots of youtube videos too.
5. install rom from the zip file using CWM recovery. (again, lots of youtube videos available)
6. factory reset and wipe the cache
7. reboot and setup the phone from scratch.
There you go.

vizionforever said:
First of all I want to thank all the developers on this and all forums, I hope that you prosper in your endeavers...
I have been at this since the sprint mogul came out. Playing around with PPC kitchen and technology keeps getting more 'interesting'...During the s3 root procedure I was fascinated with the Knox and how it was dealt with automatically with Supersu, and how cwm took control of keeping itself as the recovery as well as offering to keep root(such manners!)...
This summer I finally upgraded from my beloved Galaxy s1... After many a rom it was victim of a glass of water
spill...Bought a s3 sph-d710 for cheap and have been loving the phone but missing my wifi teather(and text to speech
prowess, why does the s3 stock suck worse than s1 cyanogen 10.2?) so I know I must root.
OOps my volume UP button is
broken! How to I get to downoad mode?
ABD? Tried finding the tiny version of abd but after failed downloads and searching for links for the tiny version were
broken so...instead I Installed towel root and followed the guide here
http://gs3.wonderhowto.com/how-to/easiest-one-click-root-method-for-your-samsung-galaxy-s3-0155625/
It was so amazingly easy(you touch the red Icon or one of the donate links in TR), wait 20 second click make it rain, wait 20 seconds then check with saferoot as root checker will tell you that you are not rooted?! After TR immediately without rebooting install #root checker, and supersu and CWM which I did thru rom manager.
Strangely #Root checker(upon my request) kept reporting that I did not have root. Curious if root checker was wrong I
nstalled safe root (noted above)and Obviously there is some whole new route to root cause It said I was indeed still rooted, weird!
I then tookout Knox with Supersu simply by opening the program(it will ask you if you want to kill Knox) also it will ask to
update everytime.
Finally I Installed, then opened Rom manager and Installed (VIA ROM MANAGER)!)CWM. Treves wifi tether did not work for me in 4.4.2 so I knew I must install fix via zip in CWM.
Then I Installed the 4g and hotspot fix and I was fully functioning..done! ND8Oxed 4.4.2..
I Used this post below as a general guide Hope this helps some, click thanks if I did..thanks all!
Happy Camper (rooted, tethered sprint galaxy s3)
Finally, I got my Sprint S3 tether working.
Many thanks to both bilgerryan and jdsingle76.
So just to help out other noob out there, what I did was:
1. root the S3. www idigitaltimes com/samsung-galaxy-s3-android-442-kitkat-update-how-root-sprint-sph-l710-variant-and-install-custom-roms
(Sorry I am not allowed to post links yet)
2. Install a custom recovery. I did not use Philz. I am sure it must be very good. However, I am not very good at using
Odin yet. I used CWM. Installed it directly from play store. There are lots of youtube videos on how to do it.
3. copy the Hotspot ROM zip file to the SD card in the phone. In my case, the ROM is the ND8 odexing version
4. Back up my stock rom (rooted) with the CWM recovery, in case something goes wrong. Lots of youtube videos too.
5. install rom from the zip file using CWM recovery. (again, lots of youtube videos available)
6. factory reset and wipe the cache
7. reboot and setup the phone from scratch.
There you go.
Click to expand...
Click to collapse
TowelRoot seems to be broken when it comes to the latest S3 model called the Sph-L710T and i have a guide in this question thread with root info for the Sph-L710 http://forum.xda-developers.com/showthread.php?t=2787771 if you want to take a look at it but thanks for the info