was trying to install twrp on my rooted lg g2 using flashify , not shure what whet wrong but, now phone will only flash lg logo, at top left screen says, boot certafcation verify,cecure booting err cause, boot certafcation verify, err and some #s then screen goes blank any help would be great,thanks
when plugged into computer it says need to format disk,them about 10 format local disk, that are lettered apear
Related
Hey guys. just tried to flash CM 10.1.3 after some bugs in Carbon started getting on my nerves. Used ROM Toolbox and ended up getting my device stuck in some kind of weird boot loop. The phone boots up with the samsung logo and (recovery booting) text at the top left hand corner. For some reason, it boots up, but nothing on the display. it vibrates every few seconds, but nothing. I tried to boot into recovery manually, but the same thing happens. So i figure I'll just to into Odin and flash my stock copy on, no big deal. For some reason, my PC, nor Odin are recognizing that the GS3 is plugged in and in download mode. No Unkown Devices, nothing shows up anywhere. Anyone know a fix, or am I completely ****ed?
If your PC does not recognize download mode, you can try to check the cable, plug it into a different USB port, or pull your battery and try again.
If none of that works, you are not screwed. Be lucky you have an android It's possible for an android to boot from an SDcard such as a windows boot disk on desktop.
Click V
http://forum.xda-developers.com/showthread.php?t=2439367 DIRECTIONS TO UNBRICK: Their download link for unbrick.img is for T-MOBILE only
http://forum.xda-developers.com/showthread.php?t=2345860 AT THE BOTTOM OF THIS THREAD, contains a link for an AT&T SGH-i747 debrick.img which should work ( I will edit my post when I complete, I am in the process of repairing my old brick now)
I an not responsible for any damage done to the device, or any sudden loss of limbs.
Thanks
LG Pad Verizon 10.1 VK700
My tablet was stuck in upgrading firmware mode whenever I booted it up. Used LG tool to flash stock firmware, and it would hang at 28%.
Went into recovery mode and clicked wipe cache, and when I rebooted it now says
boot certification verify and the top left with the LG logo and it hangs here.
Can no longer enter download mode to reflash.
Recovery mode still works, but none of the options work
*Wipe cache (top of screen will say boot certification verify and hang)
*Restore factory defaults (will hang at Restoring Factory Settings)
*Safe mode (reboots to boot certification verify and LG logo)
Figured I could try to use SRK tools, but nothing comes up in my Device manager when I plug it in anymore (not even qhsusb_bulk)
When I power it off and on with usb plugged in, windows will occasionally make the new device detected sound, but then make the device disconnected sound about a second later, so nothing will appear in device manager.
Does anybody have any suggestions or any way I can get this thing running again? Or anyway I can get my computer to even recongnize it as qhsusb_bulk so I can use SRK tools?
Hey everyone,
I did something really stupid while trying to get a certain app to recognize a codec that it needed in order for it to work and seem to have probably bricked my phone.
Phone Details:
LGH812
Lollipop 5.0.1
rooted
I went to /system/ and renamed lib64 to lib64bak because I wanted to put some new files in there. This caused the phone screen to immediately go black and unresponsive. I took out the battery and re-inserted it. The phone boot logo with LG comes up and then it goes to a black screen with the dead android guy with red triangle and the exclamation mark. No other text is present in this screen. Stays at this screen for about a minute and reboots only to go back to the exact same screen.
Things I have tried:
1.) I tried to boot into download mode (power+volume down) still goes to the aforementioned screen.
2.) Got LGUP to recognize the com port once, but it shows up as unknown and won't let me proceed with a fresh wipe/install
3.) Tried the LG Flashing tool, couldn't even see the com port.
4.) Tried the WHQL universal drivers as well as the specific device drivers with no advancement.
What I believe is happening is that it's trying to boot properly initially, but it can't find lib64 folder so it fails to launch the os and then tries to go into recovery due to error, but fails to go to recovery also because of lib64 is missing.
If anyone has any ideas/things I can try to get it into recovery or download mode or if anyone has seen this state before and was able to fix it please let me know.
Thank you all for your time!
So yesterday i was browsing facebook on my phone when it suddenly freezes and i couldnt do anything so i took the bactery out. Now my phone wont boot it stuck on logo screen but this time not LED appears i dont see the LG logo moving i use to see a bright color thingy near it and this time no flashing LED i can enter twrp recovery but the internal storage becomes 0 and i cant flash a new rom because it gave me an error. I tried to enter download mode i thought it work it said download mode then for a few secs the screen just turn black and nothing. So this is basically hard bricked im guessing?
uoweme6 said:
So yesterday i was browsing facebook ...So this is basically hard bricked im guessing?
Click to expand...
Click to collapse
It's just the universe's way of telling you to stay off of facebook
You can tell if it is a hardbrick if your G3 shows up as something strange in the device manager of your PC like qualcomm 9006 or 9008 or something else under "ports" and will not be recognized as a phone. So check what your device manager on your computer says under "portable devices" and "ports", when you plug the phone in and you can tell if you're bricked or not.
For reference: when i'm in download mode(firmware update screen)on a healthy G3 my pc sees the phone as LGE Android MTP device under "potable devices", LGE Mobile for VZW USB serial port(com41) under "ports", and "LGE Mobile for VZW USB Composite Device" under USB controllers. (*Don't mind the VZW tags as that denotes it is for a Verizon phone.)
It's good you can get into recovery, but internal storage reading 0 in recovery is strange. What error do yo get when trying to flash something in recovery? Have you tried reflashing the TWRP recovery zip or .img file in your recovery? Have you tried a different/new battery(check the date code on the battery to see how old it is - if it's 2014 it's probably bad)? A bad battery can cause random shutdowns and bootloops, it could cause your phone to reboot while in download mode(which could be why you don't make it to the "firmware update" screen after it says "download mode"), but I doubt it would cause the recovery errors
Also, please include your G3 variant (D855, Vs985, etc.) and the ROM you were running when all of this happened. Someone may have experienced your issue before and it could be ROM/variant specific with an easy fix...if it's fixable and not a catastrophic hardware issue.
Best of luck to you getting it fixed :good:
yup it says qualcom 9008 thingy i might try to reflash an image and see what happens lol im planning to buy a new phone anyway so if it cant be fixed oh well idc XD. battery is from 2014 and its lg d855
Happened to me several times, phone get overheat then just refuse to turn on
In my case, I let it charge to 100% and if still not booting, reflash the ROM
Can anyone help? i recently bricked my phone (hardly) and when i was trying to recover it using blank flash some things don't occur like planned. pc recognizes the phone with qualcomm drives but when i load the blank flash and it is a success on cmd (appears that the phone will restart on flashboot but it didn't) and continues with a black screen.
Blank flash for moto g8. Anybody have?
Blank flash for XT-2045-1 and
RAV_RETAIL_RPJS31.Q4U-47-35-15_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip