Related
After I rooted my kindle and installed adw.launcher everything was going fine. I rebooted my kindle and out of nowhere it refuses to start. Absolutely nothing shows up at all. The screen doesn't come on, the logo, nothing. The battery was at 75% when it was working. Even when I plug it in the orange charge light doesn't even come on. I need help badly and I would prefer not to have to send it in to get a replacement. The entire reason I created this xda account was to fix this. Please I need help.
That doesn't sound good. Press and hold the on button for like 20 seconds and see if anything happens.
jaredkzr said:
After I rooted my kindle and installed adw.launcher everything was going fine. I rebooted my kindle and out of nowhere it refuses to start. Absolutely nothing shows up at all. The screen doesn't come on, the logo, nothing. The battery was at 75% when it was working. Even when I plug it in the orange charge light doesn't even come on. I need help badly and I would prefer not to have to send it in to get a replacement. The entire reason I created this xda account was to fix this. Please I need help.
Click to expand...
Click to collapse
Try the Hard reset option as explained by GBH2 and if it doesn't help, then please list down what exactly did you do to root your device, stock FW version etc.
Sent from my GT-I9100 using XDA App
I have already tried the hard reset but to no avail. I have no idea what happened to it. I think I will just have to get a replacement. I followed instructions off of mobilemag and of course I can't place the link in this post.
I literally just had same issue... holing power button for 20+ seconds did the trick here.
Running CM7 w/ MAC address fix.
mine's bricked too
I also have a bricked Kindle and not sure what to do about it.
I had my KF rooted and working. Then, I followed these instructions to get a better keyboard. In short, I edited one row of the secure table in settings.db, trying to enable Hackers Keyboard. I followed the instructions very carefully, including changing permissions. When I rebooted, it stuck at the kindle fire logo, and it is still stuck there.
I can connect via adb, but can no longer burrito root. Can't run 'su'. I'm searching these forums trying to figure what to do next.
do you have twrp available ?
if not you could follow this post: http://forum.xda-developers.com/showthread.php?t=1414832
fixed
Thanks. I found that thread via http://forum.xda-developers.com/showthread.php?t=1356257&page=61 and it saved the day.
I was able to fastboot, twrp, and eventually solve my problem.
I had updated settings.db, then used `adb push` to put it in the right place. Then, I chmod-ed it as the instructions warned. However, it was owned by root not system! With twrd, I was able to get back into adb. Chown-ing and chgrp-ing that file to system solved my problem.
(Unfortunately some of the other stuff I did along the way broke a few apps... anyway I'm happy to have a working KF again.)
good to hear !!!
Did you ever get your KF to work? I can not get mine to turn on after KFU 0.9.5 used to do perm root. Now nothing works at all
Kindle fire wont power on /boot
I'm facing the same issue here, i have FFF 1.4a and TWRP 2.2.2.1 installed and JB 4.2.1 from twv. However i noticed whenever i pressed reboot from menu or power it off, i cannot turn it on again.
Luckily i have an OTG cable which help me force boot it, but i want to solve the issue coz i dont want to use the OTG cable always to turn it on.
Note: Holding power button for 20secs did not solve the issue
hi vertcam9 how do you force boot it please.
omniac
omniac said:
hi vertcam9 how do you force boot it please.
omniac
Click to expand...
Click to collapse
Hello, i have a Factory Cable (USB cable) with a different pin configuration. Basically if you have a working bootloader, you just plug it in (with a PC) and it will go to the FFF screen.
I think my issue is a busted USB port already.
ok thanks tried that, but it is deader than that.
omniac
Dead is right on the mark for mine also. With pc never detecting my CM9 , I updated my TWRP to v2.2.2.1, in hopes to go to CM10
And for first time saw *bootloader* as an option in TWRP . Screeching halt!!! Beware.
Seriously people...
vertcam9 said:
I'm facing the same issue here, i have FFF 1.4a and TWRP 2.2.2.1 installed and JB 4.2.1 from twv. However i noticed whenever i pressed reboot from menu or power it off, i cannot turn it on again.
Luckily i have an OTG cable which help me force boot it, but i want to solve the issue coz i dont want to use the OTG cable always to turn it on.
Note: Holding power button for 20secs did not solve the issue
Click to expand...
Click to collapse
vertcam9 said:
Hello, i have a Factory Cable (USB cable) with a different pin configuration. Basically if you have a working bootloader, you just plug it in (with a PC) and it will go to the FFF screen.
Click to expand...
Click to collapse
Normally I would assume you had a 2nd generation device and tried to modify it, but I see your first post was made back in April and then edited two days ago?!? Is this a new problem or the same problem you had eight months ago?
I'm pretty sure your USB port isn't bad and you just have a broken bootloader. If you have a 1st generation device, the Firekit w/shorting trick to put the device in USBboot will do the trick.
omniac said:
hi vertcam9 how do you force boot it please.
omniac
Click to expand...
Click to collapse
omniac said:
ok thanks tried that, but it is deader than that.
omniac
Click to expand...
Click to collapse
How about some details...better yet, start a new thread...In the Q&A section.
Smmoph said:
Dead is right on the mark for mine also. With pc never detecting my CM9 , I updated my TWRP to v2.2.2.1, in hopes to go to CM10
And for first time saw *bootloader* as an option in TWRP . Screeching halt!!! Beware.
Click to expand...
Click to collapse
This sounds like a completely different problem. You should probably start a new thread as well...In the Q&A section.
I have the exact same problem!!!!!!!!!
After I rooted my kindle, everything was going fine. My kindle turned off and when I rebooted, it got stuck in a bootloop. I tried to fix it by reflashing a fresh image and out of nowhere it refuses to start. Absolutely nothing shows up at all. The screen doesn't come on, the logo, nothing. The battery was at 75% when it was working.
This has been the problem since 5 months...
I am using a kindle fire 5th generation and don't have a factory cable.
Can somebody plz help!!!!!!!!!!!!
If so, can someone post a link for a cheap factory cable however I really don't want to use/buy one.
Thanks!
samiultahir said:
I have the exact same problem!!!!!!!!!
After I rooted my kindle, everything was going fine. My kindle turned off and when I rebooted, it got stuck in a bootloop. I tried to fix it by reflashing a fresh image and out of nowhere it refuses to start. Absolutely nothing shows up at all. The screen doesn't come on, the logo, nothing. The battery was at 75% when it was working.
This has been the problem since 5 months...
I am using a kindle fire 5th generation and don't have a factory cable.
Can somebody plz help!!!!!!!!!!!!
If so, can someone post a link for a cheap factory cable however I really don't want to use/buy one.
Thanks!
Click to expand...
Click to collapse
this is only for Kindle Fire 1 (2011)
there is a separate section for your device see
Fire Index: Which Amazon (Kindle) Fire Do I have?
for correct forum link
Sent from my XT1028 using XDA Labs
sd_shadow said:
this is only for Kindle Fire 1 (2011)
there is a separate section for your device see
Fire Index: Which Amazon (Kindle) Fire Do I have?
for correct forum link
Sent from my XT1028 using XDA Labs
Click to expand...
Click to collapse
Oh Thanks Anyways but do you know a fix for this?
BTW I think my device is hard bricked. :crying:
samiultahir said:
Oh Thanks Anyways but do you know a fix for this?
BTW I think my device is hard bricked. :crying:
Click to expand...
Click to collapse
post in the correct forum
Sent from my sailfish using XDA Labs
Hi. So the other day I installed TWRP on my Kindle Fire successfully. The KF was at 10.2.6, I'm not sure if that means it's a Kindle Fire 2 or not. Anyways, when I went to flash FFF, I stupidly flashed the .zip as a bootloader, thus making my Kindle Fire completely unusable. When I press the power button, nothing at all happens. Nothing I do will make the screen turn on or the power button to flash in any way. I've tried using Firekit with usbboot and the shorting trick, but that hasn't worked for me. (I just installed stock Ubuntu to a flash drive with the fk file on root, I'm fairly certain that's all that needed to be done?)
Anyways, my Kindle is unresponsove, and the usbboot trick has yet to work for me. I really want to save this guy. I've heard the KF cannot be completely bricked through software/flashing. I hope it's true! Any help would be greatly appreciated. Thank you.
if that is your software version then yes you have kindle fire 2, i'd wait for someone with more experience on here to post, but it sounds to me like you are going to need a factory cable
chris_m128 said:
if that is your software version then yes you have kindle fire 2, i'd wait for someone with more experience on here to post, but it sounds to me like you are going to need a factory cable
Click to expand...
Click to collapse
Thanks fro replying. I'm pretty sure a factory cable only puts it into fastboot if you have a working bootloader. I don't, so I don't think it would work.
I remember an instance where a friend of mine had a broken bootloader, and we used a factory cable to restore it, this was on the kindle fire. we had to first reflash the bootloader. I hope this is possible here.
---------- Post added at 11:59 AM ---------- Previous post was at 11:58 AM ----------
but you'll have to ask someone with more experience than me sorry.
jophish said:
Hi. So the other day I installed TWRP on my Kindle Fire successfully. The KF was at 10.2.6, I'm not sure if that means it's a Kindle Fire 2 or not. Anyways, when I went to flash FFF, I stupidly flashed the .zip as a bootloader, thus making my Kindle Fire completely unusable. When I press the power button, nothing at all happens. Nothing I do will make the screen turn on or the power button to flash in any way. I've tried using Firekit with usbboot and the shorting trick, but that hasn't worked for me.
Click to expand...
Click to collapse
I think you need a Factory cable to recover.
If you connect the Kindle to the PC and try adb devices in a terminal window, what do you see?
From the software version, you have KF2, as such you need to use the tools and ROMs from the KF2 threads. You could try to use the one click freedom boot and TWRP installer, to see if you can get that on.
From there you would probably have to push one of the 10.1 ROMs on, or the 10.2.6 recovery image, and then start again.
This seems to be happening a lot, and could be avoided if people read a bit more before using the wrong tools.
Sent from my Amazon Kindle Fire2 using Tapatalk HD
chronicfathead said:
I think you need a Factory cable to recover.
If you connect the Kindle to the PC and try adb devices in a terminal window, what do you see?
From the software version, you have KF2, as such you need to use the tools and ROMs from the KF2 threads. You could try to use the one click freedom boot and TWRP installer, to see if you can get that on.
Click to expand...
Click to collapse
Howdy. I just fashioned a factory cable, just jumping +5V to pin 4, right? It seems to be doing absolutely nothing. No lights or anything are turning on. The freedom boot just spits out "error: device not found" and hangs on "Pushing Stack". Again, I was under the impression that the factory cable only made it boot in fastboot if you already have a working bootloader. I'll try loading into Ubuntu and see what it says in terminal. Thanks
EDIT: So, when I type adb devices into terminal, I get:
The program 'adb' is currently not installed. You can install it by typing:
sudo apt-get install android-tools-adb
You will have to enable the component called 'universe'
Could this have been my problem to begin with?
EDIT 2: Well, I installed ADB. There are no devices found when I enter that command, and the shorting trick with still doesn't work. Ugh.
jophish said:
Howdy. I just fashioned a factory cable, just jumping +5V to pin 4, right? It seems to be doing absolutely nothing. No lights or anything are turning on. The freedom boot just spits out "error: device not found" and hangs on "Pushing Stack". Again, I was under the impression that the factory cable only made it boot in fastboot if you already have a working bootloader. I'll try loading into Ubuntu and see what it says in terminal. Thanks
EDIT: So, when I type adb devices into terminal, I get:
The program 'adb' is currently not installed. You can install it by typing:
sudo apt-get install android-tools-adb
You will have to enable the component called 'universe'
Could this have been my problem to begin with?
EDIT 2: Well, I installed ADB. There are no devices found when I enter that command, and the shorting trick with still doesn't work. Ugh.
Click to expand...
Click to collapse
Leave your Kindle plugged in for an hour using the normal cable, as it may be totally flat.
The attached diagram shows what pins need joining. If you can, make sure none of the other pins are shorting.
Hold the power button for 20 seconds, plug in your fastboot cable, power on the Kindle.
You should see some traffic lights on the screen.
If you can get fastboot enabled, you should be able to push the correct partitions back on using the partitions from the factory restore image, your backup files or from the recovery thread. Hope you get it running.
Sent from my Amazon Kindle Fire2 using Tapatalk HD
chronicfathead said:
Leave your Kindle plugged in for an hour using the normal cable, as it may be totally flat.
The attached diagram shows what pins need joining. If you can, make sure none of the other pins are shorting.
Hold the power button for 20 seconds, plug in your fastboot cable, power on the Kindle.
You should see some traffic lights on the screen.
If you can get fastboot enabled, you should be able to push the correct partitions back on using the partitions from the factory restore image, your backup files or from the recovery thread. Hope you get it running.
Sent from my Amazon Kindle Fire2 using Tapatalk HD
Click to expand...
Click to collapse
I tried the fastboot cable out on a working Kindle Fire, and it worked correctly, so I did wire it right. I did as you said, holding the power button down and then plugging in the cable, and nothing happens still on the KF2. I have access to the insides, should I unplug the battery? It should be around 85% charged. Thanks again.
Edit: BIG NEWS~ Not really. When I plug the Kindle Fire with the fastboot cable into Windows, it appears under Device Manager as "Unknown Device" with a yellow triangle, but nothing shows up on the Kindle, no lights or anything. Hmph.
jophish said:
I tried the fastboot cable out on a working Kindle Fire, and it worked correctly, so I did wire it right. I did as you said, holding the power button down and then plugging in the cable, and nothing happens still on the KF2. I have access to the insides, should I unplug the battery? It should be around 85% charged. Thanks again.
Edit: BIG NEWS~ Not really. When I plug the Kindle Fire with the fastboot cable into Windows, it appears under Device Manager as "Unknown Device" with a yellow triangle, but nothing shows up on the Kindle, no lights or anything. Hmph.
Click to expand...
Click to collapse
You could have tried sending it back to Amazon, but you say you have opened it.
Sent from my Amazon Kindle Fire2 using Tapatalk HD
chronicfathead said:
You could have tried sending it back to Amazon, but you say you have opened it.
Sent from my Amazon Kindle Fire2 using Tapatalk HD
Click to expand...
Click to collapse
Urgh. I closed it up. Is there any way they'd know if I'd opened it?
I'm in exactly the same boat as you, also flashed FFF (by accident) on my device. Haven't been able to fix it yet but I do have a factory cable. Also did the USB trick, but that didn't have an effect either.
chronicfathead said:
I think you need a Factory cable to recover.
If you connect the Kindle to the PC and try adb devices in a terminal window, what do you see?
From the software version, you have KF2, as such you need to use the tools and ROMs from the KF2 threads. You could try to use the one click freedom boot and TWRP installer, to see if you can get that on.
From there you would probably have to push one of the 10.1 ROMs on, or the 10.2.6 recovery image, and then start again.
This seems to be happening a lot, and could be avoided if people read a bit more before using the wrong tools.
Sent from my Amazon Kindle Fire2 using Tapatalk HD
Click to expand...
Click to collapse
In my case, I did by accident because it wasn't clear to me which KF generation I had (I've bricked mine just after christmas). These forums were not really clear either, I had a Kindle Fire so I just looked for a KF guide. After I bricked it I found out my device was a second generation Kindle Fire.
plinders said:
I'm in exactly the same boat as you, also flashed FFF (by accident) on my device. Haven't been able to fix it yet but I do have a factory cable. Also did the USB trick, but that didn't have an effect either.
In my case, I did by accident because it wasn't clear to me which KF generation I had (I've bricked mine just after christmas). These forums were not really clear either, I had a Kindle Fire so I just looked for a KF guide. After I bricked it I found out my device was a second generation Kindle Fire.
Click to expand...
Click to collapse
Hi, to clarify: you cannot boot into TWRP? No logos at boot at all? No boot?
I would send it back to Amazon...
Same Here..
I was thinking that all kindle fire are the same... installed fire fire fire using KFU and device got bricked....!
Hope someone here could help us get our devices up and running again...
yudanjah said:
Hi, to clarify: you cannot boot into TWRP? No logos at boot at all? No boot?
I would send it back to Amazon...
Click to expand...
Click to collapse
Nothing whatsoever.
I can't really send it back to Amazon, because of two reasons:
1) I already opened up the back
2) It was gifted to me from the US, and there is no Dutch Amazon, so I'd have to send the device back to the person who gifted to me, that person has to mail it to Amazon from there, and the replacement device has to come back the same way (via that person). That's not a situation I'd like to put that person in.
jophish said:
Urgh. I closed it up. Is there any way they'd know if I'd opened it?
Click to expand...
Click to collapse
I am sure they can figure it out. Can you boot into TWRP?
If so, you can still recover...
Dame problem
plinders said:
Nothing whatsoever.
I can't really send it back to Amazon, because of two reasons:
1) I already opened up the back
2) It was gifted to me from the US, and there is no Dutch Amazon, so I'd have to send the device back to the person who gifted to me, that person has to mail it to Amazon from there, and the replacement device has to come back the same way (via that person). That's not a situation I'd like to put that person in.
Click to expand...
Click to collapse
Same problem dude, did you fix it?
i.robert said:
Same problem dude, did you fix it?
Click to expand...
Click to collapse
Not yet I'm afraid. Everything I tried so far hasn't worked.
yudanjah said:
Hi, to clarify: you cannot boot into TWRP? No logos at boot at all? No boot?
I would send it back to Amazon...
Click to expand...
Click to collapse
No, Absolutely nothing. I really would like to get this working.
jophish said:
No, Absolutely nothing. I really would like to get this working.
Click to expand...
Click to collapse
same here we need a new firekit for the kf2
Help..
any updates on the fix? I hope someone out there could help us revive our bricked kindle fire 2... :angel:
kindle fire 2
flashed wrong bootloader (fff)
no power
no lights
no adb
shorting trick is not working for me :crying:
I rooted my Kindle Fire 2 about a week ago and I was really enjoying it. Today I decided that I wanted to get cyanogen mod on my kindle. I went to a a forum page here on XDA which had a one click thing for TWRP. I downloaded it onto my kindle and started to install it. I allowed it with superuser, but then my screen went black and turned red. Now I'm kind of nervous because I've read that now I need to use a Factory/Fastboot cable to restore it. Is there any other way for me to restore my kindle? I can turn it off by holding the power button for 20 secs, but when I turn it back on the logo flashes for 2 secs and the red screen comes back.. Please help.. I'm kinda upset right now
No. You need a cable. Sorry you are upset but this is clearly stated in the CyanogenMod thread.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
mindmajick said:
No. You need a cable. Sorry you are upset but this is clearly stated in the CyanogenMod thread.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Ok, so if I purchase the cable, will that allow me to enter fastboot and fix the problem? Is fastboot somthing that is already on the device.. or is it something that I should of installed on it beforehand? Someone told me that all I need is the Factory Cable and I can work from there. Is that true?
You might want to start reading before you permanently brick your device
Start here:
http://forum.xda-developers.com/showthread.php?t=2228539
The "someone" is correct... But save yourself somw hassle and read everything you can while waiting for your cable.
See XDA rule #1
--
Sent from my mind to your screen.
mindmajick said:
You might want to start reading before you permanently brick your device
Start here:
http://forum.xda-developers.com/showthread.php?t=2228539
The "someone" is correct... But save yourself somw hassle and read everything you can while waiting for your cable.
See XDA rule #1
--
Sent from my mind to your screen.
Click to expand...
Click to collapse
I'm sorry, I know im asking dumb questions; honestly I'm new to this and I just need some help and I do appreciate the help you are providing. I have read the link you posted, but I have one more question. When I plug in the Factory Cable is fastboot something that is already on the device? I dont think I installed fastboot on my device (if it can even be installed) But I know for a fact that my KF2 is rooted. I know this is a dumb question, but the only way for me to find out is if I ask. Thanks.
https://www.google.com/webhp?client...rce=hp&q=what+is+fastboot&oq=what+is+fastboot
--
Sent from my mind to your screen.
TruElement said:
I rooted my Kindle Fire 2 about a week ago and I was really enjoying it. Today I decided that I wanted to get cyanogen mod on my kindle. I went to a a forum page here on XDA which had a one click thing for TWRP. I downloaded it onto my kindle and started to install it. I allowed it with superuser, but then my screen went black and turned red. Now I'm kind of nervous because I've read that now I need to use a Factory/Fastboot cable to restore it. Is there any other way for me to restore my kindle? I can turn it off by holding the power button for 20 secs, but when I turn it back on the logo flashes for 2 secs and the red screen comes back.. Please help.. I'm kinda upset right now
Click to expand...
Click to collapse
i have the problem two days ago and i was crazy about that, but i did a factory cable
Red Screen Fixed !!!!
TruElement said:
I rooted my Kindle Fire 2 about a week ago and I was really enjoying it. Today I decided that I wanted to get cyanogen mod on my kindle. I went to a a forum page here on XDA which had a one click thing for TWRP. I downloaded it onto my kindle and started to install it. I allowed it with superuser, but then my screen went black and turned red. Now I'm kind of nervous because I've read that now I need to use a Factory/Fastboot cable to restore it. Is there any other way for me to restore my kindle? I can turn it off by holding the power button for 20 secs, but when I turn it back on the logo flashes for 2 secs and the red screen comes back.. Please help.. I'm kinda upset right now
Click to expand...
Click to collapse
i just fixed mine it had a red screen I tried everything....but what worked was the kindle fire first aide...YAY!!!!!
i flashed to 10.2.3 and and rooted it's all good....but you gotta use a fastboot cable...SWEET!!!!
bigrob504 said:
i just fixed mine it had a red screen I tried everything....but what worked was the kindle fire first aide...YAY!!!!!
i flashed to 10.2.3 and and rooted it's all good....but you gotta use a fastboot cable...SWEET!!!!
Click to expand...
Click to collapse
sent you PM if you got it.. needing some help.... thanks!
mistaanime said:
sent you PM if you got it.. needing some help.... thanks!
Click to expand...
Click to collapse
Okay you need factory cable it's really the fastboot cable..got mine from ebay bout $5...download kindle fire first aide...
download and install sdk manager((google it).....plug your kindle to your computer....(with the fastboot cable your screen on the kindle should say fastboot)open the kindle fire first aide and run the RunMe.bat file...choose restore image and run the program....the program also lets you root your device again.....Hope I helped you
Here's a link for the cable and a guide
google this kindle fire hd fastboot cable from ebay
bigrob504 said:
Okay you need factory cable it's really the fastboot cable..got mine from ebay bout $5...download kindle fire first aide...
download and install sdk manager((google it).....plug your kindle to your computer....(with the fastboot cable your screen on the kindle should say fastboot)open the kindle fire first aide and run the RunMe.bat file...choose restore image and run the program....the program also lets you root your device again.....Hope I helped you
Here's a link for the cable and a guide
google this kindle fire hd fastboot cable from ebay
Click to expand...
Click to collapse
Do I have to have my own system image backup? I wasn't able to "adb pull" before all of this because it wouldn't give me r/w permissions due to something called a protective shell or something?
supergaara2 said:
Do I have to have my own system image backup? I wasn't able to "adb pull" before all of this because it wouldn't give me r/w permissions due to something called a protective shell or something?
Click to expand...
Click to collapse
It helps but you can use Kindle Fire FirstAid and a factory fastboot cord and restore to factory. http://forum.xda-developers.com/showthread.php?t=2096888 You can make a fastboot cord or buy one for 10 bucks, up to you.
He did a good job describing everything.
If you want to try getting custom recovery again, root your Kindle Fire using Bin4ry's method. Use the new method (No Xperia stuff - You'll know when u use it). And use Kindle Fire First Aid and disable OTA updates. Download TweezerMod Installer (Google it) and follow instructions. You will be as amazed, excited, and happy as at first when you recovered your kindle.
help me
bigrob504 said:
i just fixed mine it had a red screen I tried everything....but what worked was the kindle fire first aide...YAY!!!!!
i flashed to 10.2.3 and and rooted it's all good....but you gotta use a fastboot cable...SWEET!!!!
Click to expand...
Click to collapse
cam you help me to unbrick my kindle fire in red screen with kindle fire first aid please
I have installed 22 different driver packages. None work. My PC connects to all my phones so I don't think the problem is there. USB port 2.0. Brand new factory cable (gets fast boot) canyon have the driver pack that works? I can believe how many bs file I have downloaded.
Also, yes, I uninstalled each one after failure an deleted all associated files. Please help before my wife shoots me!!
whodisname said:
I have installed 22 different driver packages. None work. My PC connects to all my phones so I don't think the problem is there. USB port 2.0. Brand new factory cable (gets fast boot) canyon have the driver pack that works? I can believe how many bs file I have downloaded.
Also, yes, I uninstalled each one after failure an deleted all associated files. Please help before my wife shoots me!!
Click to expand...
Click to collapse
Turns out thing work better when you actually know what you are doing. But at leas I gained some knowledge. probably had the right drivers for a day and a half. Smh
Hi , I do apologies if this is a repeated thread. I am very new with KF. My friend gave his KF which the model says 3HT7G and I guess is the 2nd gen KFHD 8.9". This KF doesn't power on at all.I tryied to hold the power button for 20 sec. and nothing happened. Did it again and connect to the power and nothing happened. I connected to 2 different win 7 pcs one of them didn't recognised at all. The other ine says unknow device. Even unistall driver and use the driver which I found on this website didn't work at all. What I know is that my friend tryied to root it maybe with the wrong version (for 1st gen?). My question is , is there any chance to try to recover it ?
carmocci said:
Hi , I do apologies if this is a repeated thread. I am very new with KF. My friend gave his KF which the model says 3HT7G and I guess is the 2nd gen KFHD 8.9". This KF doesn't power on at all.I tryied to hold the power button for 20 sec. and nothing happened. Did it again and connect to the power and nothing happened. I connected to 2 different win 7 pcs one of them didn't recognised at all. The other ine says unknow device. Even unistall driver and use the driver which I found on this website didn't work at all. What I know is that my friend tryied to root it maybe with the wrong version (for 1st gen?). My question is , is there any chance to try to recover it ?
Click to expand...
Click to collapse
If he tried to use kindle fire utility on a kindlfe fire 8.9" then it is ruined, only way to recover from that is to solder a sdcard reader to the motherboard and reflash the bootloader from a linux os. I havent checked to see if that is definately the 8.9" model or not. Usually its hard bricked if it wont even power on.
Thank you very much for your reply. Do you know where to find a guide about how to do that. Anyway it is a8.9"
I also saw that is possible to change the motherboard is that true?
Thanks again.
carmocci said:
Thank you very much for your reply. Do you know where to find a guide about how to do that. Anyway it is a8.9"
I also saw that is possible to change the motherboard is that true?
Thanks again.
Click to expand...
Click to collapse
You can replace the motherboard, but if you want any of your data back frist i suggest the other method. Lemme find a link: http://forum.xda-developers.com/showthread.php?t=2581124
i Don't remember if it has the instructions or not so lemme find the kf2 thread that has the instructions, The instructions are basically the same, only difference is that the pinouts for what to solder where are different and when you finally do get it working you have substitute the bootloader with the correct one for the kindl efire 8.9" rather than the kf2's.
http://forum.xda-developers.com/showthread.php?t=2415870
stunts513 said:
You can replace the motherboard, but if you want any of your data back frist i suggest the other method. Lemme find a link: http://forum.xda-developers.com/showthread.php?t=2581124
i Don't remember if it has the instructions or not so lemme find the kf2 thread that has the instructions, The instructions are basically the same, only difference is that the pinouts for what to solder where are different and when you finally do get it working you have substitute the bootloader with the correct one for the kindl efire 8.9" rather than the kf2's.
http://forum.xda-developers.com/showthread.php?t=2415870
Click to expand...
Click to collapse
I just wanted to verify replacing the motherboard would fix the problem. I have hard bricked my wife's Kindle Fire 8.9 HD. Can't turn it on, no response with connected to a computer. I tried detaching and reattaching the battery but no luck. If replacing the motherboard will work, I am willing to give it a try.
Yea you can replace the motherboard to fix a hard brick, but if you have a soldering iron then you could fix it without replacing the motherboard.
This FireTV has never been opened. I blocked updates per Aftvnews guide. ALso from AFTVnews serial conversion to software showed version 51.1.01 or 51.1.02. Unfortunately, I did not recall these version will not get past update screen if you are blocking updates. I had let sit at the update screen for over 30 minutes, then pulled plug. Now no lights, nothing. Tried ALT-PrtSCr-i and ALT-SysRq nothing. I bought USB A-A cable and windows shows QUB-xxxxx(or close to this from memory). Downloaded Ubuntu LiveCD and it shows 6 partitions from 17MB, 6.1GB, 2x 805MB, 2 x 8.4MB.
So not unlocked bootloader, no CWM, no TWRP nothing becasue this was A Virgin AFTV 1.
I have searched, requested help in other threads and no response and do not know what else can be done.
I do not know linux, but can follow steps and have updated 2 AFTV1 with rbox methods.
Is there anyway to save this Virgin AFTV1?
Im in the exact same boat.. But in deeper waters.. Fire Tv is only recognized as Qualcomm com port (Qualcomm HS QDLoader 9008) without showing the partitions, either in windows or linux... Never tried to install a recovery like Twrp, to unlock the bootloader, just had root since day one. But suddenly, when installing the last update something happened after the "Optimizing system storage and applications" menu. A bricked fire tv. Unfortunatelly i cant find a single trick to work... And yes.. I looked everywhere for a solution..
jj^2 said:
This FireTV has never been opened. I blocked updates per Aftvnews guide. ALso from AFTVnews serial conversion to software showed version 51.1.01 or 51.1.02. Unfortunately, I did not recall these version will not get past update screen if you are blocking updates. I had let sit at the update screen for over 30 minutes, then pulled plug. Now no lights, nothing. Tried ALT-PrtSCr-i and ALT-SysRq nothing. I bought USB A-A cable and windows shows QUB-xxxxx(or close to this from memory). Downloaded Ubuntu LiveCD and it shows 6 partitions from 17MB, 6.1GB, 2x 805MB, 2 x 8.4MB.
So not unlocked bootloader, no CWM, no TWRP nothing becasue this was A Virgin AFTV 1.
I have searched, requested help in other threads and no response and do not know what else can be done.
I do not know linux, but can follow steps and have updated 2 AFTV1 with rbox methods.
Is there anyway to save this Virgin AFTV1?
Click to expand...
Click to collapse
Was it a refurb? I had a refurb that had no power out of the box. Sent it back.
cancelyourcable said:
Was it a refurb? I had a refurb that had no power out of the box. Sent it back.
Click to expand...
Click to collapse
No, brand New.
Does the update work thru the usb?
walkabouts said:
Im in the exact same boat.. But in deeper waters.. Fire Tv is only recognized as Qualcomm com port (Qualcomm HS QDLoader 9008) without showing the partitions, either in windows or linux... Never tried to install a recovery like Twrp, to unlock the bootloader, just had root since day one. But suddenly, when installing the last update something happened after the "Optimizing system storage and applications" menu. A bricked fire tv. Unfortunatelly i cant find a single trick to work... And yes.. I looked everywhere for a solution..
Click to expand...
Click to collapse
Yes, I thought we would get some responses from somebody. Possibly even @rbox and @aftvnews.
I wish i was in your situation... You can always dd the partitions again, and eventually fix the brick... In my case (QDLoader 9008) there is nothing i can do. Eventually i could theoretically reprogram the emmc chip, but.. not going to happen. I presume you are in stuck in the Qualcomm HS QDLoader 9006, that should be fixable, since you can write to the partitions. There is a post from Rbox where he tells in detail what to do. Best of luck!
Since your FTV its still showing its partitions (unlike me!) you should be successful with these instructions. https://forum.xda-developers.com/showpost.php?p=66961740&postcount=676
walkabouts said:
Since your FTV its still showing its partitions (unlike me!) you should be successful with these instructions. https://forum.xda-developers.com/showpost.php?p=66961740&postcount=676
Click to expand...
Click to collapse
Thanks for the idea, but i did not have any chance to unlock my bootloader. So, this will not help.
jj^2 said:
Thanks for the idea, but i did not have any chance to unlock my bootloader. So, this will not help.
Click to expand...
Click to collapse
You're absolutely right... Unfortunately.. Perhaps someone in a near future discover a way to bring it to life. But for now we're holding useless bricks..
walkabouts said:
You're absolutely right... Unfortunately.. Perhaps someone in a near future discover a way to bring it to life. But for now we're holding useless bricks..
Click to expand...
Click to collapse
Has anyone been able to download update files and put on usbdrive and have the AFTV read the usb?
Please Help
jj^2 said:
Has anyone been able to download update files and put on usbdrive and have the AFTV read the usb?
Please Help
Click to expand...
Click to collapse
From my experiences, won't work. The fire tv don't read the update.zip. Without access to a workable recovery, a unlocked bootloader, or functional ADB, there is no way to revive this thing. I would love to be wrong, though..
walkabouts said:
From my experiences, won't work. The fire tv don't read the update.zip. Without access to a workable recovery, a unlocked bootloader, or functional ADB, there is no way to revive this thing. I would love to be wrong, though..
Click to expand...
Click to collapse
Walkabout,
Thanks for the feedback. Really disappointed of the lack of responses from the XDA Community
jj^2 said:
Walkabout,
Thanks for the feedback. Really disappointed of the lack of responses from the XDA Community
Click to expand...
Click to collapse
To be honest, me too. But probably, since they all have hardware in working conditions, they aren't facing the same problems as us. Perhaps one of this days Rbox bricks his AFTV, and we get a way to solve our problem..
Any news on your brick? Just had an idea, although don't know if it works, and I don't have another working fire TV. But if a backup is made on QPST from a working fire TV, and then restore that same backup on the bricked unit (using again QPST) it might restore the unit. Mmmm.. Eventually! Damn, unfortunately I don't have a good unit to backup!
walkabouts said:
Any news on your brick? Just had an idea, although don't know if it works, and I don't have another working fire TV. But if a backup is made on QPST from a working fire TV, and then restore that same backup on the bricked unit (using again QPST) it might restore the unit. Mmmm.. Eventually! Damn, unfortunately I don't have a good unit to backup!
Click to expand...
Click to collapse
Still bricked, put in box hoping later someone could find a way. Ido have a workingAFTV1, but is rooted and updated to OS5. IF you have any idea how to do this I may entertain.
jj^2
Thanks for the reply! After thinking better about my approach, its pretty much pointless, since to make a backup via QPST we have to enter in EDL mode. And there is no way to make a healthy fire TV enter service mode, not even via fastboot. My bricked fire TV is just like yours, sitting in a drawer. But I haven't given up. At least my mind is busy!
Hey guys I've tried to install https://forum.xda-developers.com/fire-tv/development/firetv-1-bueller-twrp-recovery-t3383286,
I did the steps for the locked bootloader and I didn't notice that there were errors.
It is rooted and busybox is installed. But it's stuck at the amazon logo while booting.
Do you think it's possible to unbrick it when I buy an USB-A to USB-A cable?
Version is: 51.1.5.0 30720
Thanks for your help!
Update: Ok I was able to open the stock recovery mode and it was reseting but it still won't boot.
I've waited six hours still didn't boot.
Need help
I messed up with amazon fire tv first generatio, it's now not booting up, no light nothing... when i put male-male usb cable i see its storage but that's all. adb can't find device etc.. any help will be appreciated.