Hi, i am got totally bricked HOX in APX mode. After burning eMMC partitions dump 512Mb. Phone succesefully got boot condition
Now i have phone that entering hboot immediately after powering on
I have such info on screen
*** LOCKED ***
ENDEAVORU PVT SHIP S-ON
HBOOT-1.39.0000
CPLD-None
MICROP-None
RADIO-5.1204.162A.29
eMMC-bootmode : disabled
CPU-bootmode: disabled
HW Secure boot : enabled
MODEM PATH : OFF
Dec 17 2012, 13:59:37
FASTBOOT USB
After trying to unlock bootloader got right unlock bin
But after sending it in phone and confirmation if unlock
Phone restart and stay locked. As i understand there are no
RUU version to flash it. Direct access to hboot in partition table
Give me encrypted file so i think is unable to downgrade hboot
By direct access to emmc. Any ideas how to bring it alive ?
Download right ruu for your phone and flash. Check your CID first
In CMD write fastboot getvar all
You will get all info about phone and current software.
bihslk said:
Download right ruu for your phone and flash. Check your CID first
In CMD write fastboot getvar all
You will get all info about phone and current software.
Click to expand...
Click to collapse
Hello , detailed info
Code:
c:\ADB_DUMPER>fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 1.39.0000
INFOversion-baseband: 5.1204.162A.29
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.20.401.1
INFOserialno: SH26CW105349
INFOimei: 353995055**********
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: 11111111
INFObattery-status: low
INFObattery-voltage: 3581mV
INFOdevpower: 14
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed wonnt downgrade device.
vim1 said:
Hello , detailed info
Code:
c:\ADB_DUMPER>fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 1.39.0000
INFOversion-baseband: 5.1204.162A.29
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.20.401.1
INFOserialno: SH26CW105349
INFOimei: 353995055**********
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: 11111111
INFObattery-status: low
INFObattery-voltage: 3581mV
INFOdevpower: 14
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed wonnt downgrade device.
Click to expand...
Click to collapse
Nope. Your version is INFOversion-main: 3.20.401.1 you cant downgrade it. You need that ruu. But is your CID INFOcidnum: 11111111 ?
bihslk said:
Nope. Your version is INFOversion-main: 3.20.401.1 you cant downgrade it. You need that ruu. But is your CID INFOcidnum: 11111111 ?
Click to expand...
Click to collapse
That's SuperCID.
I think that he was S-OFF before and dunno how he became S-On. That may be the reason unlockcode.bin isn't working for him.
Sent from my One X
athulele said:
That's SuperCID.
I think that he was S-OFF before and dunno how he became S-On. That may be the reason unlockcode.bin isn't working for him.
Sent from my One X
Click to expand...
Click to collapse
Hi , same thing with CID: HTC__Y13 i have tried both
Code:
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0
(bootloader) version-baseband: 5.1204.1
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.20.401.1
(bootloader) serialno: ********************
(bootloader) imei: **********************
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 3609mV
(bootloader) devpower: 22
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
Now will try to detect where version-main: 3.20.401.1 stored
Update 1
MMCBLK0P14 (SIF) Adress in USER: 0x5C00000, Length: 0×400000 [332E32302E3430312E3100000 3.20.401.1\0\0\0]
vim1 said:
Hi , same thing with CID: HTC__Y13 i have tried both
Code:
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0
(bootloader) version-baseband: 5.1204.1
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.20.401.1
(bootloader) serialno: ********************
(bootloader) imei: **********************
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 3609mV
(bootloader) devpower: 22
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
Now will try to detect where version-main: 3.20.401.1 stored
Click to expand...
Click to collapse
Wait, can you post a photo of the phone in bootloader mode?
Sent from my One X
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For shure
UPDATE1 And new - funny photos
UPDATE 2
Flashed RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed.exe
and got same HBOOT screen
Code:
c:\ADB_DUMPER>fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 1.39.0000
INFOversion-baseband: 5.1204.162.29
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.14.401.31
INFOserialno: SH26zzzzzzz
INFOimei: 353995055zzzzzzz
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: HTC__Y13
INFObattery-status: good
INFObattery-voltage: 3774mV
INFOdevpower: 69
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
c:\ADB_DUMPER>
vim1 said:
Flashed RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed.exe
and got same HBOOT screen
Click to expand...
Click to collapse
Are the phone is working now or stay in bootloader again. And yes some phones are with Super CID but S-ON.
Thant said:
Are the phone is working now or stay in bootloader again. And yes some phones are with Super CID but S-ON.
Click to expand...
Click to collapse
Phone now stay in HBOOT mode but can be flashed with this firmware again and again. HTCDEV unlock.bin accepted but phone still in same HBOOT ;-(
Any Ideas ?
Same problem
vim1 said:
Phone now stay in HBOOT mode but can be flashed with this firmware again and again. HTCDEV unlock.bin accepted but phone still in same HBOOT ;-(
Any Ideas ?
Click to expand...
Click to collapse
I have a same problem, my HOX is also in boot mode, I alrady flash unlock code .bin and flash custom rom but phone still in bootmode, plz expert help me how to fix this problem and how can enable eMMC bootmode? My cid is Y_13 and HBoot version is 1:72
only_love said:
I have a same problem, my HOX is also in boot mode, I alrady flash unlock code .bin and flash custom rom but phone still in bootmode, plz expert help me how to fix this problem and how can enable eMMC bootmode? My cid is Y_13 and HBoot version is 1:72
Click to expand...
Click to collapse
Tell us how your phone get in this state ?
Don't know
vim1 said:
Tell us how your phone get in this state ?
Click to expand...
Click to collapse
Do not know how was happened with my phone cuz my brother was using my phone. U already fix same problem and ur hox is running now?
vim1 said:
Phone now stay in HBOOT mode but can be flashed with this firmware again and again. HTCDEV unlock.bin accepted but phone still in same HBOOT ;-(
Any Ideas ?
Click to expand...
Click to collapse
Are you tryed to flash custom recovery like Philz and what is the result howw is recognised your phone in device manager?
Lol I think the device is now f+cked up.
Could be now some partition error and nothing except of changing mainboard will work
Gesendet von meinem One X mit Tapatalk
Thant said:
Are you tryed to flash custom recovery like Philz and what is the result howw is recognised your phone in device manager?
Click to expand...
Click to collapse
No , i am not shure that device with locked will run unsigned code. But will try tomorrow , device battery almost empty and i left it on charger. Maybe problem is HBOOT = 1.39 i need to find hboot with lover version for direct burning.
One-X-master said:
Lol I think the device is now f+cked up.
Could be now some partition error and nothing except of changing mainboard will work
Gesendet von meinem One X mit Tapatalk
Click to expand...
Click to collapse
It is very interesting idea but I am make Bootable and flash-able from piece of plastic in APX mode.
Can you do the same? If you pretty shure that device unrecoverable tell me a reason.
B.r.
Was it before s-offed or with superCID?
Gesendet von meinem One X mit Tapatalk
One-X-master said:
Was it before s-offed or with superCID?
Gesendet von meinem One X mit Tapatalk
Click to expand...
Click to collapse
Device are S-OFF and CID = 1111111 before , than device have been bricked by wrong hboot.
I am wrote dump from fully working device except board information region and software information region.
I thing need lower hboot version.
Can you try to write another Cid and see if it still works? If yes also try just flashing recovery or so through fastboot...so custom recovery...if that maybe works then with custom recovery and any backup you could get it working...if not hm...will think about what you could do
Gesendet von meinem One X mit Tapatalk
Related
Ace XA SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Im stuck in hboot and no recovery options work
This has never been rooted and is branded three mobile but unlocked,I tried the PD file to sd but I am getting CID error,ADB does
not show any devices listed to get the CID to create a gold card.
Any advice greatly appreciated please
thanks
tatty-scones said:
Ace XA SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Im stuck in hboot and no recovery options work
This has never been rooted and is branded three mobile but unlocked,I tried the PD file to sd but I am getting CID error,ADB does
not show any devices listed to get the CID to create a gold card.
Any advice greatly appreciated please
thanks
Click to expand...
Click to collapse
Hey, how did you get to that state? ADB won't work in hboot, but you can use fastboot commands. Plug the phone in hboot and make sure that it reads fastboot usb in red in the phone (if it reads HBOOT USB PLUG, just press power). Then, open a cmd and type:
Code:
fastboot devices
fastboot getvar all
The first command will show your serial number if the device is detected, the second will prompt CIDnum, serial, IMEI and some other stuff. Paste the getvar all outcome in here and i will help you to find a RUU for your device. PLEASE DELETE THE IMEI from the list, it is not necessary and it might be dangerous.
glevitan said:
Hey, how did you get to that state? ADB won't work in hboot, but you can use fastboot commands. Plug the phone in hboot and make sure that it reads fastboot usb in red in the phone (if it reads HBOOT USB PLUG, just press power). Then, open a cmd and type:
Code:
fastboot devices
fastboot getvar all
The first command will show your serial number if the device is detected, the second will prompt CIDnum, serial, IMEI and some other stuff. Paste the getvar all outcome in here and i will help you to find a RUU for your device. PLEASE DELETE THE IMEI from the list, it is not necessary and it might be dangerous.
Click to expand...
Click to collapse
Hi,I didnt do anything,I just had not used the phone for a weeks and the battery was empty.
heres the results:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0027
(bootloader) version-baseband: 26.14.04.28_M
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main:
(bootloader) serialno: 123456789012
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD98*****
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3623mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 743ca94a
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) region-id: 0
Thanks a lot for that
cheers
tatty-scones said:
Hi,I didnt do anything,I just had not used the phone for a weeks and the battery was empty.
heres the results:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0027
(bootloader) version-baseband: 26.14.04.28_M
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main:
(bootloader) serialno: 123456789012
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD98*****
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3623mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 743ca94a
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) region-id: 0
Thanks a lot for that
cheers
Click to expand...
Click to collapse
Sorry, I would need the main version as well to see what exact RUU you were running...
glevitan said:
Sorry, I would need the main version as well to see what exact RUU you were running...
Click to expand...
Click to collapse
Is there another way to find the main version?
cheers
tatty-scones said:
Is there another way to find the main version?
cheers
Click to expand...
Click to collapse
in the getvar all...info-main. It should be something like 3.13.284.5....
glevitan said:
in the getvar all...info-main. It should be something like 3.13.284.5....
Click to expand...
Click to collapse
I tried but it just shows up as blank
any other suggestions please?
thanks
tatty-scones said:
I tried but it just shows up as blank
any other suggestions please?
thanks
Click to expand...
Click to collapse
That Is weird....never saw tat before. Let me do dome research
tatty-scones said:
I tried but it just shows up as blank
any other suggestions please?
thanks
Click to expand...
Click to collapse
Hey, I haven't found anything like your issue. But we can try to create a goldcard and flash an unbranded RUU and see what happens. I can lend you a hand over teamviewer if it is alright with you. This weekend will be kinda busy, but from sunday on we can arrange...
I have one too with the exact problem...any news ?
10x !
hi sir/madam...
my phone version number...
ACE PVT SHIP S-OFF RL
HBOOT- 2.00.0027
MICRO- 0438
RADIO- 26.14.04.28_M
eMMC-boot
sep 7 2011, 19:06:24
HBOOT
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMAGE CRC
i want to go back to stock rom for warranty purpose...
i flash to The RUU of
RUU_Ace_HTC_WWE_1.72.405.3_R_Radio_12.28e.60.140f_ 26.04.02.17_M2_release_161342_signed
and
RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_R_Radio_12.65 .60.29_26.14.04.28_M_release_233505_signed
but i have trouble always say
[ERROR][131]Customer ID Error
its say uncorrect RUU...
but it see the radio of my phone is same as the RUU of the second one...
did i got a wrong ones,wrong RUU.?
what sould i do.?
please help me...
i appreciate your kindness...
fprado06 said:
hi sir/madam...
my phone version number...
ACE PVT SHIP S-OFF RL
HBOOT- 2.00.0027
MICRO- 0438
RADIO- 26.14.04.28_M
eMMC-boot
sep 7 2011, 19:06:24
HBOOT
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMAGE CRC
i want to go back to stock rom for warranty purpose...
i flash to The RUU of
RUU_Ace_HTC_WWE_1.72.405.3_R_Radio_12.28e.60.140f_ 26.04.02.17_M2_release_161342_signed
and
RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_R_Radio_12.65 .60.29_26.14.04.28_M_release_233505_signed
but i have trouble always say
[ERROR][131]Customer ID Error
its say uncorrect RUU...
but it see the radio of my phone is same as the RUU of the second one...
did i got a wrong ones,wrong RUU.?
what sould i do.?
please help me...
i appreciate your kindness...
Click to expand...
Click to collapse
Seems that you are not superCID and that is failing. Boot in fastboot usb and type:
fastboot getvar all
See what INFOcidnum you have
Sent from my GT-N7000 using xda app-developers app
glevitan said:
Seems that you are not superCID and that is failing. Boot in fastboot usb and type:
fastboot getvar all
See what INFOcidnum you have
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
here's mine...
INFOversion: 0.5
INFOversion-bootloader: 2.00.0027
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 1.72.405.3
INFOserialno: HT0CPRX00880
INFOimei: 35299042442549
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: T-MOB005
INFObattery-status: good
INFObattery-voltage: 4150mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASBOOT
INFOcommitno-bootloader: 743ca94a
INFOhbootpreupodate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.008s
what should i do now?....
fprado06 said:
what should i do now?....
Click to expand...
Click to collapse
you still have T-Mobile CID number...weird. You should create a goldcard then...
glevitan said:
you still have T-Mobile CID number...weird. You should create a goldcard then...
Click to expand...
Click to collapse
can you give me the lick how to create goldcard.?
fprado06 said:
can you give me the lick how to create goldcard.?
Click to expand...
Click to collapse
Here you are:
http://forum.xda-developers.com/showthread.php?t=1248095
glevitan said:
Here you are:
http://forum.xda-developers.com/showthread.php?t=1248095
Click to expand...
Click to collapse
i already downgrade my phone from 1.72.405.3 to 1.31.405.3
what should i do now...
i want to flash a stock rom...
like RUU but a already got error from flashing of that...
can you give me some advice....?
this is my new INFO from my phone:
version: 0.5
version-bootloader: 2.00.0027
version-baseband: 26.14.04.28_M
version-cpld: None
version-microp: 0438
version-main: 1.31.405.3
serialno: HT0CPRX00880
imei: 356299042442549
product: ace
platform: HBOOT-7230
modelid: PD9810000
cidnum: T-MOB005
battery-status: good
battery-voltage: 4199mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 743ca94a
hbootpreupdate: 11
gencheckpt: 0
region-id: 0
plzzzz.... my phone got malfunction sometimes...
its always typing a keypad without any touching the screen..
when a got to off and on its back to normal....
sorry for my bad english...
(((((((((ــــــــــ can you help me plz to solve my branded htc ???
Hello everybody.
i have an htc desire hd now i only have a blank white screen wiyh htc logo. though i can access to some menus:
-fastboot menu :
c:\sdk\tools>fastboot getvar all
version: 0.5
version-bootloader: 0.85.0024
version-baseband: 26.09.04.11_M2
version-cpld: None
version-microp: 0438
version-main: 2.36.161.12
product: ace
platform: HBOOT-7230
modelid: PD9810000
cidnum: VODAP304
can i have an ruu for vodafon spain ???
If you want it to debrand then look up my signatur
From HTC
naayja said:
Hello everybody.
i have an htc desire hd now i only have a blank white screen wiyh htc logo. though i can access to some menus:
-fastboot menu :
c:\sdk\tools>fastboot getvar all
version: 0.5
version-bootloader: 0.85.0024
version-baseband: 26.09.04.11_M2
version-cpld: None
version-microp: 0438
version-main: 2.36.161.12
product: ace
platform: HBOOT-7230
modelid: PD9810000
cidnum: VODAP304
can i have an ruu for vodafon spain ???
Click to expand...
Click to collapse
What did you do to end in that state?
Sent from my GT-N7100 using xda app-developers app
glevitan said:
What did you do to end in that state?
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.85.0024
(bootloader) version-baseband: 26.09.04.11_M2
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main: 2.50.161.3
(bootloader) serialno: HT113RX04120
(bootloader) imei: 356299043374642
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD9810000
(bootloader) cidnum: VODAP304
(bootloader) battery-status: good
(bootloader) battery-voltage: 4116mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: a3d4fa0f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) region-id: 0
all: Done!
finished. total time: 0.014s
Click to expand...
Click to collapse
any help ?
naayja said:
any help ?
Click to expand...
Click to collapse
1. Don't bump more than once every 24 hours.
2. You didn't answer glei's question.
glevitan said:
What did you do to end in that state?
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
i dont know because i buy it in this state...
Reboot into bootloader by turning it off, then pressing volume-down and power. What does it say?
bananagranola said:
Reboot into bootloader by turning it off, then pressing volume-down and power. What does it say?
Click to expand...
Click to collapse
it stuck in htc logo , when i want to flash hboot to unlock bootloader they told me that the ruu is not compatible,what should i do ???
naayja said:
it stuck in htc logo , when i want to flash hboot to unlock bootloader they told me that the ruu is not compatible,what should i do ???
Click to expand...
Click to collapse
Again, exactly what does the bootloader say? When you get into bootloader there should be a bunch of text. Paste it here.
bananagranola said:
Again, exactly what does the bootloader say? When you get into bootloader there should be a bunch of text. Paste it here.
Click to expand...
Click to collapse
ACE PVT SHIP S-ON RL
HBOOT-0.85.0024
MICROP-0438
RADIO-26.09.04.11_M2
eMMC-boot
Apr 12 2011,00,55:45
naayja said:
ACE PVT SHIP S-ON RL
HBOOT-0.85.0024
MICROP-0438
RADIO-26.09.04.11_M2
eMMC-boot
Apr 12 2011,00,55:45
Click to expand...
Click to collapse
Find a compatible RUU from the link on the RUU thread. If you can't find one, make a goldcard; there's another thread for that. Then run an unbranded RUU.
Hi,
I need to send my phone back for repair, I've got HBOOT 1.72 and am running the 4.18.401.2 firmware. I've tried running the RUU for the 3.14 version but it won't work.
There isn't an RUU for the 4.18 version yet.
Can anyone point me in the right direction to get back to stock and unrooted?
Cheers,
Tom
willmott1992 said:
Hi,
I need to send my phone back for repair, I've got HBOOT 1.72 and am running the 4.18.401.2 firmware. I've tried running the RUU for the 3.14 version but it won't work.
There isn't an RUU for the 4.18 version yet.
Can anyone point me in the right direction to get back to stock and unrooted?
Cheers,
Tom
Click to expand...
Click to collapse
I think you can use the appropriate nandroid backup from here http://forum.xda-developers.com/showthread.php?t=1975140 if an ruu is not available.
willmott1992 said:
Hi,
I need to send my phone back for repair, I've got HBOOT 1.72 and am running the 4.18.401.2 firmware. I've tried running the RUU for the 3.14 version but it won't work.
There isn't an RUU for the 4.18 version yet.
Can anyone point me in the right direction to get back to stock and unrooted?
Cheers,
Tom
Click to expand...
Click to collapse
Yse this STOCK 4.18.401.2
1.Download odexed Stok Rom and copy to your sd card on the phone
2. Flash your rom from the CWM or TRWP
3. flash stock recovery.img in fastboot
4. flash stock boot.img in fastboot
5.Relock bootlader
6.Backup your SD Card and do factory reset wit option delete SD card
7. Send for repair
I send my for repear with this step and I dont have any problem, I have problem with the mainboard and they repleace the old phone with the new one. And now I have new ONE X on 2 weeks.
Thant said:
Yse this STOCK 4.18.401.2
1.Download odexed Stok Rom and copy to your sd card on the phone
2. Flash your rom from the CWM or TRWP
3. flash stock recovery.img in fastboot
4. flash stock boot.img in fastboot
5.Relock bootlader
6.Backup your SD Card and do factory reset wit option delete SD card
7. Send for repair
I send my for repear with this step and I dont have any problem, I have problem with the mainboard and they repleace the old phone with the new one. And now I have new ONE X on 2 weeks.
Click to expand...
Click to collapse
Thanks very much I managed to find this rom and do everything you said. It's good to see that you didn't have any issues when sending it back for repair. Hopefully mine will be perfectly fine
willmott1992 said:
Thanks very much I managed to find this rom and do everything you said. It's good to see that you didn't have any issues when sending it back for repair. Hopefully mine will be perfectly fine
Click to expand...
Click to collapse
I hope you are lucky too. The relocked state could be a reason not to repair under warranty
Help
Thant said:
Yse this STOCK 4.18.401.2
1.Download odexed Stok Rom and copy to your sd card on the phone
2. Flash your rom from the CWM or TRWP
3. flash stock recovery.img in fastboot
4. flash stock boot.img in fastboot
5.Relock bootlader
6.Backup your SD Card and do factory reset wit option delete SD card
7. Send for repair
I send my for repear with this step and I dont have any problem, I have problem with the mainboard and they repleace the old phone with the new one. And now I have new ONE X on 2 weeks.
Click to expand...
Click to collapse
Hello
Android 4.2.2
ViperX 4.0.6
htc sense 5.0
htc sdk api level 5.41
Kernel: 3.1.10-g7f360be [email protected] #1 SMP PREEMPT
Baseband version: 5.1204.167.31
Build number: 4.18.401.2 CL231174 release-keys
---------------------------------------------------------
Hboot - 1.39.0000
S-ON
cid: HTC__032
This is my HTC One X info, i also wan't to get back to stock to send my phone on repair.
I am afraid to just follow the procedure written above, because i am afraid different CID or HBOOT could brick my device...
Am i right or can i just follow the same procedure? I am sorry for noob question, i just really don't want to brick my device.
Thanx for help
ryanrazer said:
Hello
Android 4.2.2
ViperX 4.0.6
htc sense 5.0
htc sdk api level 5.41
Kernel: 3.1.10-g7f360be [email protected] #1 SMP PREEMPT
Baseband version: 5.1204.167.31
Build number: 4.18.401.2 CL231174 release-keys
---------------------------------------------------------
Hboot - 1.39.0000
S-ON
cid: HTC__032
This is my HTC One X info, i also wan't to get back to stock to send my phone on repair.
I am afraid to just follow the procedure written above, because i am afraid different CID or HBOOT could brick my device...
Am i right or can i just follow the same procedure? I am sorry for noob question, i just really don't want to brick my device.
Thanx for help
Click to expand...
Click to collapse
No your main version must be lower then 4.18.401.2 because your Hboot is 1.39 for 4.18 base is 1.72 please post the result from command fastboot getvar all and delete from the info your S/N and your IMEI and we see your tru main version
Thant said:
No your main version must be lower then 4.18.401.2 because your Hboot is 1.39 for 4.18 base is 1.72 please post the result from command fastboot getvar all and delete from the info your S/N and your IMEI and we see your tru main version
Click to expand...
Click to collapse
C:\Windows\system32>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.31
(bootloader) serialno: xxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxxx
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3903mV
(bootloader) devpower: 65
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.824s
This is it
ryanrazer said:
C:\Windows\system32>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.31
(bootloader) serialno: xxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxxx
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3903mV
(bootloader) devpower: 65
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.824s
This is it
Click to expand...
Click to collapse
OK I am right. Now dounload this RUU 3.14.401.31 lock your bootloader fastboot oem lock and run the RUU. If you receive the error I think you will not download nandroid backup for your base 3.14.401.31 from Nandroid backucp thread and restore via custom recovery. For the nandroid you will must unlock the bootloader again it will be good to have Unlock_token.bin. I think it will install the RUU without the problem but I am not so sure for this I write you the second way restore via nandroid. Good luck and report back.
Thant said:
OK I am right. Now dounload this RUU 3.14.401.31 lock your bootloader fastboot oem lock and run the RUU. If you receive the error I think you will not download nandroid backup for your base 3.14.401.31 from Nandroid backucp thread and restore via custom recovery. For the nandroid you will must unlock the bootloader again it will be good to have Unlock_token.bin. I think it will install the RUU without the problem but I am not so sure for this I write you the second way restore via nandroid. Good luck and report back.
Click to expand...
Click to collapse
Thank you for your help, my kind Sir!
It all worked! I just have one more question. I have reflashed stock recovery... and my bootloader says "relocked".
Shouldn't it say "LOCKED"?? Will i loose my warranty if it says "RELOCKED" since that means it was unlocked and than relocked...?
ryanrazer said:
Thank you for your help, my kind Sir!
It all worked! I just have one more question. I have reflashed stock recovery... and my bootloader says "relocked".
Shouldn't it say "LOCKED"?? Will i loose my warranty if it says "RELOCKED" since that means it was unlocked and than relocked...?
Click to expand...
Click to collapse
You can take the stock recovery from this OTA. But the RUU have nothing to do with recovery. To this moment everybody lock the bootloader and install the RUU the RUU erase everything on your phone and install everything(recovery rom etc...)
EDIT: you are on the latest RUU 3.14.401.31 and you are on the same main version have a little chance to receive error from the RUU for this but this is the easy way to restor or try the long way is nandroid.
Thank you
Thant said:
You can take the stock recovery from this OTA. But the RUU have nothing to do with recovery. To this moment everybody lock the bootloader and install the RUU the RUU erase everything on your phone and install everything(recovery rom etc...)
EDIT: you are on the latest RUU 3.14.401.31 and you are on the same main version have a little chance to receive error from the RUU for this but this is the easy way to restor or try the long way is nandroid.
Click to expand...
Click to collapse
Thank you for all your help! My phone is back on stock! Thank you!
ryanrazer said:
Thank you for all your help! My phone is back on stock! Thank you!
Click to expand...
Click to collapse
No problem You go to stock only with RUU 3.14.401.31 right?
No warranty
Thant said:
No problem You go to stock only with RUU 3.14.401.31 right?
Click to expand...
Click to collapse
[email protected]:~$ sudo fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.31
(bootloader) serialno: xxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3783mV
(bootloader) devpower: 34
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.828s
[email protected]:~$
This RUU i have... i downloaded the one you sent me... But i saw on the net that bootloader is "RELOCKED". And you loose your warranty if your bootloader is "RELOCKED", it must be "LOCKED" if you want to keep warranty and send your phone on repair... As i saw on internet there is no way of keeping warranty on HOX... :/
ryanrazer said:
[email protected]:~$ sudo fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.31
(bootloader) serialno: xxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3783mV
(bootloader) devpower: 34
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.828s
[email protected]:~$
This RUU i have... i downloaded the one you sent me... But i saw on the net that bootloader is "RELOCKED". And you loose your warranty if your bootloader is "RELOCKED", it must be "LOCKED" if you want to keep warranty and send your phone on repair... As i saw on internet there is no way of keeping warranty on HOX... :/
Click to expand...
Click to collapse
Not in all service is like this When I send my HOX they changed with new one and My bootloader say RELOCKED. You can try if they say something like they will don't want to repear you will take the phone back. Just TRY maybe you will have luck like me
Thant said:
Not in all service is like this When I send my HOX they changed with new one and My bootloader say RELOCKED. You can try if they say something like they will don't want to repear you will take the phone back. Just TRY maybe you will have luck like me
Click to expand...
Click to collapse
Aha ok... i will try my luck! Thanks mate, i will report back their decision!
ryanrazer said:
Aha ok... i will try my luck! Thanks mate, i will report back their decision!
Click to expand...
Click to collapse
Good luck from me I hope they will repair:good:
Thant said:
Good luck from me I hope they will repair:good:
Click to expand...
Click to collapse
Hey mat could you also help me out. .I am trying to find out a nandroid backup/RUU that will put me to stock on 4.1.1. Following are my detaisl, I am unable to find the correct one :
INFOversion: 0.5a
INFOversion-bootloader: 1.73.0000
INFOversion-baseband: 5.1204.167.31
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.19.708.1
INFOserialno: SH2***1458
INFOimei: 353426****2
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ461****
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4151mV
INFOdevpower: 100
INFOpartition-layout: None
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 0.821s
prafulk1987 said:
Hey mat could you also help me out. .I am trying to find out a nandroid backup/RUU that will put me to stock on 4.1.1. Following are my detaisl, I am unable to find the correct one :
INFOversion: 0.5a
INFOversion-bootloader: 1.73.0000
INFOversion-baseband: 5.1204.167.31
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.19.708.1
INFOserialno: SH2***1458
INFOimei: 353426****2
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ461****
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4151mV
INFOdevpower: 100
INFOpartition-layout: None
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 0.821s
Click to expand...
Click to collapse
I see you are S-OFF relock the bootloader and run this RUU 3.14.708.28
Thant said:
I see you are S-OFF relock the bootloader and run this RUU 3.14.708.28
Click to expand...
Click to collapse
The utility reaches the screen where it starts copying stuff. .then gives an error 158 and tells me to find the correct update update utility. .
What am i doing wrong
I think the utility will not downgrade me from 4.19.708.1 to a 3.xx.708.xx ?? For that do we need to do a nandroid restore ? In that case can anyone point me to th one that will be applicable for me ? Since i have no clue on that. .
I just want to go back to 4.1.1 or 4.1.2 as the 4.2.2 update broke my camera focussing funtionality.
Q&A for HTC One M8 firmware collection for different CID/MID | 3.28.401.6
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
cant update firmware 3.28.401.6
cant seem to figure it out what am i doing wrong i have htc m8 S-on cant get s-off everytime i try it says htc patched it using firewater. so i read up as much as i could downloaded the file 3.28.401.6 try to install but i get an error which i found out means my cid an mid dont match my current CID IS TMOB010 AND MY MD IS 0P6B13000 im running on ARHD 11.2 and i need the firmware installed before i jump to arhd 20.1
Not sure which firmware to flash
Hi,
Currently I have a At&T HTC One M8 with the following
Android Version 4.4.3
Rom Version 2.22.401.5
Software Number Android revolution HD 11.1
I wanted to flash the newest ARHD found here http://forum.xda-developers.com/showthread.php?t=2694917
But I saw a few comments saying the WiFi doesn't work unless you have the newest firmware which is 3.28.401.6
So I went to the HTC One M8 firmware collection thread here http://forum.xda-developers.com/showthread.php?t=2696282
My Phone is S-Off and the CID is the SuperCID 11111111, but when I ran the command "fastboot getvar all" the version-main: was blank as shown below
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.14.21331931.LA21G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:xxxxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxx
(bootloader) imei2:xxxxxxxxxxxxxxx
(bootloader) meid:xxxxxxxxxxxxxxxxxxx
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: 11111111
Click to expand...
Click to collapse
Is there a reason it is blank?
I was a little concerned whether or not it was safe for me to flash the firmware 3.28.401.6
Thanks for for any help you can provide.
@mike1986. Need an help. I guess I have bricked my phone badly. My phone is S-on and 4.4.3 running on it as base and I had viper Rom on it. I first flashed the stock recovery and then relocked the boot loader and flashed the latest firmware 3.28.401.6.
Now the phone isn't booting. It has stuck on this screen and it has been 30 mins now and the phone still haven't booted.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please help[emoji22]
I am not able to reboot, put it in recovery or reboot to boot loader.
cardozclive said:
@mike1986. Need an help. I guess I have bricked my phone badly. My phone is S-on and 4.4.3 running on it as base and I had viper Rom on it. I first flashed the stock recovery and then relocked the boot loader and flashed the latest firmware 3.28.401.6.
Now the phone isn't booting. It has stuck on this screen and it has been 30 mins now and the phone still haven't booted.
Please help[emoji22]
I am not able to reboot, put it in recovery or reboot to boot loader.
Click to expand...
Click to collapse
What Rom are you trying to boot into? 4.4.3 or 4.4.4?
You should be able to boot to bootloader. Hold power then immediately volume up and downat same time. When phone powers off release the volume up button and it should boot to boot loader.
Sent from my HTC One_M8 using Xparent Blue Tapatalk 2
On the first page it says that flashing these firmware zips will flash a new recovery. Then you have to reflash a custom recovery afterwards. My computers down for the moment, so can I just rename the recovery image to 0P6BIMG and flash that way ? I'd really like to give sense another try...
---------- Post added at 09:13 AM ---------- Previous post was at 09:12 AM ----------
jxcorex28 said:
On the first page it says that flashing these firmware zips will flash a new recovery. Then you have to reflash a custom recovery afterwards. My computers down for the moment, so can I just rename the recovery image to 0P6BIMG and flash that way ? I'd really like to give sense another try...
Click to expand...
Click to collapse
I'm not sure if this is important to anyone but I'm s-off, rooted, and I have AT&T with superCID
my cid is J15
and I want to install this software how that
omarsoos said:
my cid is J15
and I want to install this software how that
Click to expand...
Click to collapse
sorry Iam wrong
My Cid is
htc__044
Rolando88 said:
Mike or anyone please what do i need to download for the New firmware my main version is 1.12.401.17 bootloader 3.16.0.0000
Cid htc_e11
Click to expand...
Click to collapse
Please help me
firmware
cid = T-MOB010
mid = 0P6B13000
with S-On
- What firmware should I d/l to update to the latest?
Firmware download HTC One M8
Hi Mike,
As I did not read correctly I did not flash the newest Firmware before flashing HD-One_m8_21.0.zip.
Now I try to download the 3.28.401.7.zip from your db_mirror\firmware site, but after download I get the message: "invalid zip".
Any idea?
Tnx, Chris
Same problem
I need help!
I'm s-off
i've locked the bootloader with oem lock command,
flashed the new firmware,
but now the phone stuck on htc white loading screen after playng boot-up sound.
I can go to bootloader but what then?
what i've to do?
thanks in advance
arhd 21 wifi not working
Just updated to arhd 21 WIFI now just hangs then shuts off
Any insights? Greatly appreciate any help.
Unlocked
S-OFF
CID: CW__001
Firmware: 3.28.401.7
poachstevens said:
Just updated to arhd 21 WIFI now just hangs then shuts off
Any insights? Greatly appreciate any help.
Unlocked
S-OFF
CID: CW__001
Firmware: 3.28.401.7
Click to expand...
Click to collapse
Are you sure that's your cid? Should be CWS__001. They're 8 characters. Is that a typo in your post, or do you really have that cid in phone?
jollywhitefoot said:
Are you sure that's your cid? Should be CWS__001. They're 8 characters. Is that a typo in your post, or do you really have that cid in phone?
Click to expand...
Click to collapse
Sorry yes, that was a typo CWS__001
How do I restore with s on on T-Mobile m8
3.28.401.7 Firmware
Hi
I was trying to flash the 3.28.401.7 firmware today, but i did get some errors.
My Htc m8 is S-OFF and have CID HTC__Y13. What am I doing wrong?
(bootloader) start image[sbl1-2] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-2,0
(bootloader) [RUU]UZ,sbl1-2,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) current_image_number=6
(bootloader) start image[sbl1-3] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-3,0
(bootloader) [RUU]UZ,sbl1-3,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) current_image_number=7
(bootloader) start image[sbl1-4] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-4,0
(bootloader) [RUU]UZ,sbl1-4,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) current_image_number=8
C:\sdk>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.21331147A1.19_2G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.401.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
HTC One M8
When is gonna be an update for the Firmware for the M8 which are not in the list above?
having trouble flashing firmware from 2.22.401.5 to 3.28.401.7 or 3.29.401
Hey all, having trouble flashing either of the above firmware (3.28.401.7 or 3.29.401). Everytime I fastboot to RUU and try flashing, it fails. Any ideas as to what I'm missing? Let me know if I should provide more info.
HTC One M8
RELOCKED
S-OFF
cid - 11111111
HBOOT - 3.16
android - 4.4.3
firmware - 2.22.401.5
ARHD - 11.2
steps:
fastboot oem lock
fastboot oem rebootRUU - phone reboots to RUU screen
fastboot flash zip firmware.zip
fails everytime
version 0.5 and hbootpreupdate: 11
Hi all
I flashed 3.28.401.9 firmware last night and everything is OK. But i can't figure out why I'm still on version 0.5 and hbootpreupdate: 11
Is ther anyone that can help me?
C:\sdk>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.401.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
C:\sdk>