[Q] P6 went bad - Huawei Ascend P6, Mate

Hello,
I need help
i bought a huawei p6 in china but first problem was that everything was in chinese...
i could change in settings to english but still a lot was in chinese.
now i tried to get a rom on it but somewhere i must have messed up bad..
instead of showing the huawei logo in startup now it shows mediatek
it also sais when i plug it in to my computer it says suddenly HTC Dream..
i can get into a chinese facorty mode by pressing the volume up+down and power button
and i can get to a recovery mode by pressing the volume up and power button..
i forgot to make a backup file of the first time a got it because it was new and i wanted to change so thought it wouldn't be so important :|
what got in my mind is maybe someone of you can send me a backup file (clean) and help me out here!!!
THANKSSS

Dyontje said:
Hello,
I need help
i bought a huawei p6 in china but first problem was that everything was in chinese...
i could change in settings to english but still a lot was in chinese.
now i tried to get a rom on it but somewhere i must have messed up bad..
instead of showing the huawei logo in startup now it shows mediatek
it also sais when i plug it in to my computer it says suddenly HTC Dream..
i can get into a chinese facorty mode by pressing the volume up+down and power button
and i can get to a recovery mode by pressing the volume up and power button..
i forgot to make a backup file of the first time a got it because it was new and i wanted to change so thought it wouldn't be so important :|
what got in my mind is maybe someone of you can send me a backup file (clean) and help me out here!!!
THANKSSS
Click to expand...
Click to collapse
Download a ROM, and flash it. But make sure you download a ROM for this device not for HTC for example.

Maybe you are bought a fake, something like this: http://www.aliexpress.com/store/pro...tphone-NFC-Android-4-2/506677_1538963108.html or another I don't know. In the diferent China web stores I see different fakes of P6 and all of them are based on MTK SoC

ZuperStyler said:
Download a ROM, and flash it. But make sure you download a ROM for this device not for HTC for example.
Click to expand...
Click to collapse
seems like i'm not able to flash it or i do it the wrong way..
can you please tell me step by step how to do it?

Dyontje said:
seems like i'm not able to flash it or i do it the wrong way..
can you please tell me step by step how to do it?
Click to expand...
Click to collapse
I don't think it will work, as alex.79 has said, you may have bought a fake, unfortunately.
alex.79 said:
Maybe you are bought a fake, something like this: http://www.aliexpress.com/store/pro...tphone-NFC-Android-4-2/506677_1538963108.html or another I don't know. In the diferent China web stores I see different fakes of P6 and all of them are based on MTK SoC
Click to expand...
Click to collapse
Sent from my Huawei P6

Related

does my LU6200 brick?

I want to install official stock KDZ186, but it can't enter system , then I flash KDZ135 next , but it won't boot , I have try many solutions on the forums , but it can't boot , can't enter download mode , can't enter official recovery, it won't reflect whatever I do , is it "dead" ?:crying:
Who konws how to save it .
Before the flashing was done, was your phone working well ? if it is youre doing something wrong. Can you post what has been done on your unit.
If you can see LG logo when you press power button, then its not dead.
mastercipo said:
Before the flashing was done, was your phone working well ? if it is youre doing something wrong. Can you post what has been done on your unit.
Click to expand...
Click to collapse
Yes, it was working well before I flash 186 , it couldn't enter system after flashed 186 , then I flash 135, it won't wake after 135. It is bricked now .I search on internet , it should be recovered , but it is complex .
mastercipo said:
Before the flashing was done, was your phone working well ? if it is youre doing something wrong. Can you post what has been done on your unit.
Click to expand...
Click to collapse
sixline said:
If you can see LG logo when you press power button, then its not dead.
Click to expand...
Click to collapse
no , it can't reboot any more , it is bricked really , I have searched many time on internet. The most important I don't know how to recover it .
sixline said:
If you can see LG logo when you press power button, then its not dead.
Click to expand...
Click to collapse
i have same scenario here, my phone didn't bootup at all. is there any help. your help will appreciate..
ohj_17 said:
i have same scenario here, my phone didn't bootup at all. is there any help. your help will appreciate..
Click to expand...
Click to collapse
Can you verify that your battery is not fully discharged?
Try to charge your battery with an external charger.

[Q] Bricked , any way to unbrick !

Hi all , I've bricked this device about a month ago , I've been searching for unbrick method , I can say i searched the entire internet i was unnable to find any unbrick methods , nor new mainboard , I even conntacted huawei in the us , and they told me to buy new motherboard in alibaba.com there's no motherboard there to , I was supprised they to have no mainboards nor support for unbricking the device ,
so my question , Does anywan know how to do it, or where can i pursache a new motherboard.
You kind of need to explain the symptoms before the doctor can do anything, same thing applies here.
Explain what is happening on your device, No response / stuck on boot animation, will it go to Recovery etc.
Also what have you tried to unbrick. Give us some info otherwise we can't help.
I haven't seen any P6 Mobos for sale on Ebay and such, I wouldn't know about that.
Explain here... You'll get your phone unbricked. Never say die
Sent from my P6-U00 using XDA Premium HD app
PulseDroid said:
You kind of need to explain the symptoms before the doctor can do anything, same thing applies here.
Explain what is happening on your device, No response / stuck on boot animation, will it go to Recovery etc.
Also what have you tried to unbrick. Give us some info otherwise we can't help.
I haven't seen any P6 Mobos for sale on Ebay and such, I wouldn't know about that.
Click to expand...
Click to collapse
Well , I was trying to flash the CleanRom project , I'have made a post about that to ,
The Instructions were wery clear to me i followed them exactly how it was writen in tutorial.
I have an international verzion of P6 and according to that turorial , ( http://forum.xda-developers.com/showthread.php?t=2625680 )
in order to flash that room i moust firstly flash an Chineze verzion which comes with unlocked bootloader , then i did that
I downloaded the rom put it on phone flashed via setteings update software , then everything went fine the process it seelf showd me
completed 100% and in the end sayd OK , then my phone turned off, and it's never been on eversince :A
As of now the phone is totally dead black screen , I've tryed everything it doesent go in any mode
When i plug in the power cord it only shows a red light indicator.
I belive this is a Hard Brick , not soft brick .
Warranty? Did the same to mine got I repared for free...
jagwar1 said:
Warranty? Did the same to mine got I repared for free...
Click to expand...
Click to collapse
nope , no warranty
Nexhmedin said:
nope , no warranty
Click to expand...
Click to collapse
Did you tell them that you have bricked your P6? Just tell them you haven't done anything and you're a total noob.
rupro327 said:
Did you tell them that you have bricked your P6? Just tell them you haven't done anything and you're a total noob.
Click to expand...
Click to collapse
Yes i did brick my P6 and nope I aint gona tell them Im a noob :A
The thing here is to get help in here is not about send it back to china so if you have any other idea , your welcome to share.
I have no warranty , even if it had this phone is buyed in china , and traveled to the otherside of the world :it would cost as mouch as the phone itseelf to send it back to service.
Try flashing the latest TWRP, it has off mode charging. Can you put your phone in fastboot mode via adb ?
Not Hard Brick!
Happened to me before and guess what? Tried very simple thing - and it worked.
Take your sdCard out of the phone.
Replace the dload folder with the extraction from either the B111 from the Huawei site or the B125 from here on xda
Reinsert card and press all buttons down till phone goes into internal recovery.
Your main problem will be having enough battery to get you twenty minutes.
If your red light is functioning, you probably haven't blown your motherboard.
Sent from my LG-D802 using XDA Premium HD app
Nexhmedin said:
Hi all , I've bricked this device about a month ago , I've been searching for unbrick method , I can say i searched the entire internet i was unnable to find any unbrick methods , nor new mainboard , I even conntacted huawei in the us , and they told me to buy new motherboard in alibaba.com there's no motherboard there to , I was supprised they to have no mainboards nor support for unbricking the device ,
so my question , Does anywan know how to do it, or where can i pursache a new motherboard.
Click to expand...
Click to collapse
you device boot an loop in huawei screen.
samuelbryan said:
you device boot an loop in huawei screen.
Click to expand...
Click to collapse
Nope my device is completly frozzen no sign of life dead screen , when I connect to pc nothing show's up I've tryed installing drivers and everything else with no success same thing nothing happen's.
Nexhmedin said:
Nope my device is completly frozzen no sign of life dead screen , when I connect to pc nothing show's up I've tryed installing drivers and everything else with no success same thing nothing happen's.
Click to expand...
Click to collapse
Only solution for that is to take your phone to local service. I am talking from experience.
Sent from my ME371MG using xda app-developers app
Can you check if you plug it into you computer that your computer connects to it or makes a sound? That can probably prove that the motherboard is fine and maybe your LCD is broken or has loose connection.
Happened to me before. Black screen, only red led, nothing else working. It happened that I got scammed by a seller.
What I ended up doing was taking apart the phone and I found that the LCD connection was loose. Fixed that, then I saw that the phone wouldn't boot. Loaded B111, B118, nothing worked. I then got B125, and it miraculously worked.
You could try what I did, but it is quite risky and I was very lucky.
I have to agree with goce. Unless you are experienced and willing to mess around with things, you should go find local service.
samuelbryan said:
you device boot an loop in huawei screen.
Click to expand...
Click to collapse
What can I do on my phone just flashes the red light and include only the logo of huawei.
My P6 is stuck on splash screen. I rooted the handset and tried to install TWRP via flashify, it installed but after reboot its just stuck on splash screen. I cannot go into recovery as well now.
gurvinder76 said:
My P6 is stuck on splash screen. I rooted the handset and tried to install TWRP via flashify, it installed but after reboot its just stuck on splash screen. I cannot go into recovery as well now.
Click to expand...
Click to collapse
I think you should download the TWRP recovery for jelly bean from surdu and flash it from bootloader. If you are on the international this is the method for unlocking bootloader:
http://forum.xda-developers.com/showthread.php?t=2666116
Flash a custom rom next
Sent from my P6-U06 using XDA Premium 4 mobile app

[Q] Fail root on Optimus G E977

Hello everyone, i have used this site for root another phones on past but now i can't understand how to fix my problem by myself. Thats why i'm here to kindly ask(beg) for help.
I tryed to root the phone, first i used the Framaroot, i thought it worked but look likes not, i'm getting the Secure booting Error! Couse: boot certification verify.
Ok, looks not a big deal, lots of guys got it and solved their problems with this post. But now is where i ask sorry because i couldn't make it.
I can enter on dowload mode, i tried all the steps on the post and did not worked. I need a light.
When i used the KDZ_FW, i got a message of error on extrating file.
When i tryed make a Recovery Hard Reset, i got the message Secure booting Error! Couse: boot certification verify.
When i try to turn it on by pressing the power + volumerdown = nothing happen.
I have a Optimus G E977, and the software was the E97710d.
Thanks for the attention.
http://forum.xda-developers.com/showpost.php?p=45355871&postcount=1
Question 5. I know it's hard to read before..i see things didn't changed around since i left. I see same lazy people,rushing into things before looking around....pffff....
Maybe U can help me too.
Everything was fine with my OG but problems start when installing CM11. I decided to go back to stock later (I did it) but then couldnt be able to enter recovery or download mode. I tried several methods like re root, unlock again and lately using ROM Manager and trying to install another recover all get screwed up. Only black screen. Trying and trying I could install KDZ firmware
So then I root, unlock boatloader with method one from here: http://forum.xda-developers.com/showthread.php?t=2667398
Ok i dont know if boatloader is unlocked now but i know I cant enter recovery or download mode. Im afraid to use freegee to try to unlock again.
What should I do.
Thanks
kimitza said:
http://forum.xda-developers.com/showpost.php?p=45355871&postcount=1
Question 5. I know it's hard to read before..i see things didn't changed around since i left. I see same lazy people,rushing into things before looking around....pffff....
Click to expand...
Click to collapse
kimitza said:
http://forum.xda-developers.com/showpost.php?p=45355871&postcount=1
Question 5. I know it's hard to read before..i see things didn't changed around since i left. I see same lazy people,rushing into things before looking around....pffff....
Click to expand...
Click to collapse
I appreciate your intention to help, maybe its because i'm a Braziliam guy, with not the best english, that i can't figure how to use the FREEGEE app if i can't start the cellphone.
Thanks again.
OBS: I have used that app too before get this error. And was just becouse tryed to enter on recovery mode that i got that message.
I understand that your celphone cant turn on or enter download mode or recovery?
If thats your situation maybe I can help U (I think)
Fuguets said:
I appreciate your intention to help, maybe its because i'm a Braziliam guy, with not the best english, that i can't figure how to use the FREEGEE app if i can't start the cellphone.
Thanks again.
OBS: I have used that app too before get this error. And was just becouse tryed to enter on recovery mode that i got that message.
Click to expand...
Click to collapse
Well, i'll try to explain all to not get missunderstood.
My situation is, without the USB cable the celphone don't respond to any button press.
With USB cable, by the momment that i plug it, the screen shows the error message.
With the USB cable and in the error message screen, i can press the volume buttons +- and power, after that the phone restart and shows the download mode.
What i know so far is, if i can enter download mode, and here is your words, all is not lost.
Knowing that, all solutions i found on this site doesn't work with me. Or, what is possible, i didn't make it right.
The phone do not enter on recovery mode.
I gess this is all. For now
Thanks for the patience to teach who needs to be teached.
ErnestoD said:
I understand that your celphone cant turn on or enter download mode or recovery?
If thats your situation maybe I can help U (I think)
Click to expand...
Click to collapse
My previous problem was far worst than yours.
I recommend U to uninstall all LG stuff from your PC and follow this guide: http://www.htcmania.com/forumdisplay.php?f=1026
Its in spanish so I think U wont have much problem
I did it yestesrday and save me. Whit it U will install a new KDZ firmware, even if it is bigger than 1GB
Good luck
QUOTE=Fuguets;51799238]Well, i'll try to explain all to not get missunderstood.
My situation is, without the USB cable the celphone don't respond to any button press.
With USB cable, by the momment that i plug it, the screen shows the error message.
With the USB cable and in the error message screen, i can press the volume buttons +- and power, after that the phone restart and shows the download mode.
What i know so far is, if i can enter download mode, and here is your words, all is not lost.
Knowing that, all solutions i found on this site doesn't work with me. Or, what is possible, i didn't make it right.
The phone do not enter on recovery mode.
I gess this is all. For now
Thanks for the patience to teach who needs to be teached.[/QUOTE]
As I see, if i'm looking for the guide you are refering, of install the original rom, is the same one that i already tried and i got message error of extract file.
I deleted all lg stuff from computer, downloaded everything of the guide and the message is the same.
Any more suggestion ?
PS: I prefer english version , at least to read is easy to me.
Edit1:I wonder if the fact of my kdz file be bigger than 1gb causes that ?
Edit2: When i try the guide on this link the step 7 does not show to me, and my phone or some similar does not show on the Usb Controler list to install.
Thanks again
ErnestoD said:
My previous problem was far worst than yours.
I recommend U to uninstall all LG stuff from your PC and follow this guide
Its in spanish so I think U wont have much problem
I did it yestesrday and save me. Whit it U will install a new KDZ firmware, even if it is bigger than 1GB
Good luck
QUOTE=Fuguets;51799238]Well, i'll try to explain all to not get missunderstood.
My situation is, without the USB cable the celphone don't respond to any button press.
With USB cable, by the momment that i plug it, the screen shows the error message.
With the USB cable and in the error message screen, i can press the volume buttons +- and power, after that the phone restart and shows the download mode.
What i know so far is, if i can enter download mode, and here is your words, all is not lost.
Knowing that, all solutions i found on this site doesn't work with me. Or, what is possible, i didn't make it right.
The phone do not enter on recovery mode.
I gess this is all. For now
Thanks for the patience to teach who needs to be teached.
Click to expand...
Click to collapse
[/QUOTE]
I didnt see that on XDA. I used this method with 2 kdz´s, one smaller and another one bigger than 1gb.
Maybe U missed something.
Fuguets said:
As I see, if i'm looking for the guide you are refering, of install the original rom, is the same one that i already tried and i got message error of extract file.
I deleted all lg stuff from computer, downloaded everything of the guide and the message is the same.
Any more suggestion ?
PS: I prefer english version , at least to read is easy to me.
Edit1:I wonder if the fact of my kdz file be bigger than 1gb causes that ?
Edit2: When i try the guide on this link the step 7 does not show to me, and my phone or some similar does not show on the Usb Controler list to install.
Thanks again
Click to expand...
Click to collapse
[/QUOTE]
Now I am really worried about that. I just can't acces the phone by any kind of way.
When i try the Unlock Botloader, it says that didn't found my device.
Now, after restart the computer, it says: The system cannot find the patch specified.
Is there no more options for me ?
The drivers I have downloaded here was automaticly updated from 8.0xx to 10.0xx, I unterstand this is a good thing, am I wrong ?
Could U flash KDZ using the method from htc mania?? (Im using it rigth now with 1.2GB KDZ firmware)
How did U come to that situation?
Fuguets said:
Now I am really worried about that. I just can't acces the phone by any kind of way.
When i try the Unlock Botloader, it says that didn't found my device.
Now, after restart the computer, it says: The system cannot find the patch specified.
Is there no more options for me ?
The drivers I have downloaded here was automaticly updated from 8.0xx to 10.0xx, I unterstand this is a good thing, am I wrong ?
Click to expand...
Click to collapse
I did that, while i use the KDZ one minute after start unpacking the file, it shows the error message and finish the procces. I don't know if is that what you were asking.
When I tried the button Read Phone Information, it tells me Emergency Not Support Batt Level Check.
Is that the problem ?
ErnestoD said:
Could U flash KDZ using the method from htc mania?? (Im using it rigth now with 1.2GB KDZ firmware)
How did U come to that situation?
Click to expand...
Click to collapse
Did U overwrite LGMOBILEAX folder was stated and (step 2). Did U edit hosts file as stated (step 3=
In my case i previously have a black screen, nothing more, but connecting phone to PC while pressing both volum keys aloud PC to recognice the phone.
If U receive extraction error that means that the patch is wrong. Do not press anything more in the program There is no need to
Fuguets said:
I did that, while i use the KDZ one minute after start unpacking the file, it shows the error message and finish the procces. I don't know if is that what you were asking.
When I tried the button Read Phone Information, it tells me Emergency Not Support Batt Level Check.
Is that the problem ?
Click to expand...
Click to collapse
I did not overwrite that folder, maybe we are looking for different guides because if that was something that i supose to do i didn't saw that on the guide.
I did not edit hosts file.
I restarted the computer now again, and now my message is: device not found.
Can you place the link of exacly guide i need to look ? Couse the link you send me before has a various of them.
ErnestoD said:
Did U overwrite LGMOBILEAX folder was stated and (step 2). Did U edit hosts file as stated (step 3=
In my case i previously have a black screen, nothing more, but connecting phone to PC while pressing both volum keys aloud PC to recognice the phone.
If U receive extraction error that means that the patch is wrong. Do not press anything more in the program There is no need to
Click to expand...
Click to collapse
http://www.htcmania.com/showthread.php?t=802175
Remenber to start from zero
Tested on WIN7 64 bits
ErnestoD said:
http://www.htcmania.com/showthread.php?t=802175
Remenber to start from zero
Tested on WIN7 64 bits
Click to expand...
Click to collapse
Helo again, i just finish the proccess now. Again i got the same message, I attached the log file, if you please have a look on that i appreciate.
I don't know, all the problem looks to be batterys fault. I hope not. Thanks.
Edit1: I foun this guide, do you think it could help me ?
But I didn't understand that well, looks like I need to be able to start the OS of the phone, which i can't.
Im sad to hear that , This is beyond my knowledge. It worked for me but...
Fuguets said:
Helo again, i just finish the proccess now. Again i got the same message, I attached the log file, if you please have a look on that i appreciate.
I don't know, all the problem looks to be batterys fault. I hope not. Thanks.
Click to expand...
Click to collapse
ErnestoD said:
Im sad to hear that , This is beyond my knowledge. It worked for me but...
Click to expand...
Click to collapse
What about my edit, where i found that someone said it solve the problem on 15%, do you think it could work ?
I just don't understant well, do I need to be able to start my phone rom ? Or i can do on my situation ?
Hello guys,
I am so happy that I wanted to share this with you. As I still have headache from googling how to flash back your stock rom (which didn't work out because the flash tool gave an error every time at 15%), I can save you a lot of headache with this very very simple fix.
For some people the tool works just fine, but when you have some google bootloader or a newer freegee unlocked one and you want back to stock, lots of people cant follow this thread because of the error at 15%.
The fix is EASY and I found it on the Optimus L9 section, thanks to that guy on XDA.
Follow exactly Davevinci's great thread except for one thing:
http://forum.xda-developers.com/show....php?t=2498102
Step 4 is now:
4.GO TO DOWNLOAD MODE POW+BOTH VOL BUTTON PRESSED+CONNECT USB
But step 4 should be:
- Boot up your phone in any stock based rom, for example SAVVY Rom V5
- Enable USB debugging and connect your phone through USB using the LG PC Suite option (make sure to kill PC suite in tast manager).
Now you should see the driver installation of LGE Android MTP device as usual and then just run the flash tool from the guide. Also de mode DIAG is now the right one. The flashtool will reboot your phone to download mode automatically when it's needed.
Still an error? Don't worry, disable virus scanner and firewall and just reconnect your phone. I got an error one time, during flashing, but I followed the steps the flashtool suggested me and now everything went fine.
Click to expand...
Click to collapse
The link U provide is not working and U didnt upload any log, I didnt see it.
As I read to perform that action u must be able to turn on your phone.
Did U try to flash a smaller then 1gb kdz or try another ones.
As U can see U wont receive to much help in LG forum. There are good guides but on time help is another thing.
Did U try this guide (method 1): http://forum.xda-developers.com/showthread.php?t=2667398
Is your phone properly detected in your PC?
Fuguets said:
What about my edit, where i found that someone said it solve the problem on 15%, do you think it could work ?
I just don't understant well, do I need to be able to start my phone rom ? Or i can do on my situation ?
Click to expand...
Click to collapse
I did not tried with a smaller archive because I can't download it. Among the Brazilian files I only can download the version 10D. I am on phone now but I will send the link that I'm trying asap. I really appreciate your help man. Even that I didn't found the solution yet is nice count with some experience help.
Enviado de meu XT1032 usando Tapatalk
Edit: From this list http://forum.xda-developers.com/showthread.php?t=2093382 , all brazilian links show Access Denied
And from here http://lg-phone-firmware.com/index.php?id_mod=20, only the V10D of Brazil.
I'm looking for the number 16, CLR/CLARO(BRAZIL) which is less than 1GB. Maybe i'm wrong, but when i clic on the name, a page of TNY shows a link of ADFLY that after i clic on close advertisement nothing happen.
About the method 1, I did try that, but sometimes it says "device not found" or "the system cannot find the patch specified". I'll try that from another computer, i let you know if i have some lucky. But the guy of the guide said:
!enable usb debugging
connect as MTP
follow the script"
Maybe its not for me.
Look what happen. (I'm using download mode)
*********************************************
* Tool Unlock BL Optimus G - Update 0414 *
* *
*********************************************
*** Select a number ***
1. UNLOCK BOOTLOADER
Seclect a number : 1
1. [Unlock] Optimus G JB 4.1.2 Selelct
Seclect a number : 1
FreeGee UNLOCK
Thanks to Team Codefire
1. JB 4.1.2
╣Seclect a Number : 1
1. KT
2. SKT
3. LGU+
╣Seclect a number : 1
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
Unlock BL success.
╕Reboot [y]/[n] :
About my phone get propper detected, i guess it is, at least on my devices map it shows "Lg AndroidNet Phone"

[Q] Few questions from a Noob

Hello, since I had my sprint lg optimus g, I played a lot with it, because we don't have sprint here in Venezuela, so I had to set the phone to be used here. It seems that i play too much whit it and bring it to a hard brick, the phone does nothing, not even recognized by the pc. So I wonder if this can be arranged in any way? If the screen of this model can be put to the international model with no problems? If the logic board of the international version can work with the rest of the hardware of this version? In advance thank you very much.
SalomnA said:
Hello, since I had my sprint lg optimus g, I played a lot with it, because we don't have sprint here in Venezuela, so I had to set the phone to be used here. It seems that i play too much whit it and bring it to a hard brick, the phone does nothing, not even recognized by the pc. So I wonder if this can be arranged in any way? If the screen of this model can be put to the international model with no problems? If the logic board of the international version can work with the rest of the hardware of this version? In advance thank you very much.
Click to expand...
Click to collapse
how did you hard brick it..
krishnanmailbox1 said:
how did you hard brick it..
Click to expand...
Click to collapse
Well i was exploring in the hidden menu on the phone and i push in something like a update, after that the phone just can be in the recovery, i made a restore much times, format everithing and put it a custom rom, but nothing works. So i start to search for help here in XDA but no one have pass something like that i thing, and after i search in google, i dowload a file name it recovery go out or something like that, after that the phone doesn't do nothing, like a said the pc don't recognized, no nothing :crying:
SalomnA said:
Well i was exploring in the hidden menu on the phone and i push in something like a update, after that the phone just can be in the recovery, i made a restore much times, format everithing and put it a custom rom, but nothing works. So i start to search for help here in XDA but no one have pass something like that i thing, and after i search in google, i dowload a file name it recovery go out or something like that, after that the phone doesn't do nothing, like a said the pc don't recognized, no nothing :crying:
Click to expand...
Click to collapse
are you able to get into recovery...???
krishnanmailbox1 said:
are you able to get into recovery...???
Click to expand...
Click to collapse
No i'm not :crying:
SalomnA said:
No i'm not :crying:
Click to expand...
Click to collapse
What happens when you hold volume down button and power together? It should bring up the factory recovery and you should be able to do a hard reset. Press power again to do the reset.
dopy25 said:
What happens when you hold volume down button and power together? It should bring up the factory recovery and you should be able to do a hard reset. Press power again to do the reset.
Click to expand...
Click to collapse
No i try it, but it doesn't do nothing

red magic 5g black screen how to fix?

Hi,,
I have a rooted red magic 5 International version that I am trying to update it, since I am new to this stuff I tried one of videos that led me to a black screen. I tried to charge, press power and volume buttons and there is no response. so please if any one can help me or suggesting anything to do will make me glad.
Thanks
RedMagic999 said:
Hi,,
I have a rooted red magic 5 International version that I am trying to update it, since I am new to this stuff I tried one of videos that led me to a black screen. I tried to charge, press power and volume buttons and there is no response. so please if any one can help me or suggesting anything to do will make me glad.
Thanks
Click to expand...
Click to collapse
I need help too.
You both have bricked your devices.
Please, if you haven't perfected customization, don't do anything you see online.
Go to this and download the unbrick tool for your device then unbrick.
zayidhs said:
You both have bricked your devices.
Please, if you haven't perfected customization, don't do anything you see online.
Go to this and download the unbrick tool for your device then unbrick.
Click to expand...
Click to collapse
I did try all the Unbricked tools from XDA. Nothing work. Seems like when it start flashing it disconnect the phone.
Salor123 said:
I did try all the Unbricked tools from XDA. Nothing work. Seems like when it start flashing it disconnect the phone.
Click to expand...
Click to collapse
Its mean?y device
zayidhs said:
You both have bricked your devices.
Please, if you haven't perfected customization, don't do anything you see online.
Go to this and download the unbrick tool for your device t
Click to expand...
Click to collapse
Its mean my devuce us aldo briked coz of my prblm as like same i was also try to local update i just copy and paste zip other directry and install to update then my device is shutdown i hv try many time to turn on but no response
" i just want to knw its possible to fix or not..

Categories

Resources