Hello..
when i switch phone mode to dm mode using ##3424#..
windows ask me driver called generic serial..i can't find it in windwos\system32\drivers..
so plz anyone can help me ..i need to switch phone to this mode so i can connect it with cdma workshop to Reset SPC code to 6 Zero's..
any reply..!!!
Dear Please Use USB Modem Driver (USBModemxp)
Please don't bring back threads that are almost 2 years old! Thanks.
will some of use still use that phone and still need to know how thank you
I in fact was looking for that answer today, so thx
Hi, I'm new and frustrated.
I used to have a nice HTC Touch 3G which died and now I have this lg gm750 windows mobile phone. However, I cannot choose to use it as a storage device as I could do with my HTC. Can anybody offer help? The program that asks HTCs can be found somewhere and used in my case? Thanks in advance.
I dont think that it is possible. If no active sync is installed, the PC doesnt recognize my GM750 at all.
btw my apologies for your miss
You can use WM5torage.
http://208.100.42.21/showthread.php?t=372188
Dear All,
Does anyone have access to Microsoft connect? I happen to posses a development device which is currently known as omnia7 but I could not update the device as I do not have access to Microsoft connect... Could anyone kindly provide the latest image (*.ffu) if possible specifically for "Taylor" from Microsoft connect? would really appreciate it.
Also the device comes with "pre-sales unit radio disabled" but when I insert sim, it detects it and recognizes the number. Checking the about section shows that the phone is enabled and unlocked. Unfortunately, typing *#06# it returns 000000000 as the imei number. Can anyone provide a clue whether I can enable this?
Thanks!
First of all this is not my work, i was not able to the team with this, but i was following everything and have a heads up as well..
Note : Links Updated
biktor_gj over at XDA along with ULTRASHOT managed this.
NOTE : IF YOU HAVE A LUMIA 800 WITH QUALCOMM , PM ME
Second : IF YOU HAVE NO IDEA WHAT YOU READ PLEASE DO NOT TRY THIS!
GET IN TOUCH WITH ME OR A MOD, WE WILL HELP YOU.
I CAN TRY TO HELP YOU REMOTELY BUT WE'LL NEED TO ADJUST THE TIME.
Third : There is some risk in this if you dont do it correct by yourself, myself and no one is responsible for your device.
This is all under your own risk.
Even if we help you i tell you till now i havent nor any of my friends havent bricked a phone.
To make sure, we are well aware of how this works.
You need Something called as a Qualcomm on 800 and 710
For a 710 device , any 710 can be unlocked, even if it has a DLOAD.
For an 800, only a device showing up as Qualcomm can be unlocked.
A DLOAD in 800 cannot be unlocked as yet.
To know what type of Loader you have follow this :
Open device manager in you PC (Just so you dont miss the driver installation, its better view able in Device manager)
Power off your phone , dont plug the USB as yet.
Hold VOLUME UP button and plug the USB in the PC.
Check device manager.
You will have a DLOAD or a Nokia cable connectivity or a Qualcomm technology.
In case of DLOAD and Nokia cable connectivity. Nothing else will be noticeable.
If you get a Qualcomm, u will get a box to format Disk, say NO!
SO now
Qualcomm = unlocked bootloader
DLOAD = Locked bootloader
* UNLOCKED BOOTLOADER = NO NCS = YES CUSTOM ROM
* LOCKED BOOTLOADER = YES NCS = NO CUSTOM ROM
For Lumia 710 users, u need to flash a Qualcomm bootloader (Unlocked bootloader) to enable Qualcomm , so u can Full Unlock your device.
If You have DLOAD, follow the full tuto.
IF you have a Qualcomm, goto step B.
[glow=red,2,300]Important : Flashing a CUSTOM ROM, to full unlock your phone will need a HARD RESET , in which you will loose all your data.
I would recommend you back up all your data, mostly just sync your pics and stuff of you PC and sync your contacts to your LIVE ID.[/glow]
---------------------------------------------------------------------------------------------------
A.To install Qualcomm Bootloader in Lumia 710:
http://www.youtube.com/watch?v=N9kM0hDMgWA&feature=youtu.be
1.Download the new version NSS
http://www.mediafire.com/download.php?rjn2ffwau8drfnn
2.Extract to a folder, start the program.A folder named "loaders" will be created in the NSS folder.
3.Download this : http://www.4shared.com/rar/RmIuS9gP/qualcomm_bootloader_files_for_.html
4.Insert the 2 loaders from above link in \loaders\special\wp7\
RM803_12w07_prod_generic_nokia_osbl.esco &
RM803_11w48_prod_raw_nokia_osbl.bin
5.Install these drivers:
http://www.4shared.com/rar/W5cHhg6V/winusb_drivers_x86.html for 32 bit users
http://www.4shared.com/rar/Iz4Y5JEm/winusb_drivers_x64.html * for 64 bit users
6.Now select "Nokia USB Connectivity" in NSS in the white box.
6. Go to Flashing->WP7 Tools->Install.
DONE.
Now you have an unlocked bootloader, so u can flash a custom ROM.
head to 2nd part.
---------------------------------------------------------------------------------------------------
B.To flash a Full unlocked rom in Lumia 710:
Before flashing i would suggest you use this : http://forum.xda-developers.com/showpost.php?p=25126572&postcount=642
so you dont have to go through for the activation code.
http://www.youtube.com/watch?v=RV-CkXFz3ZI&feature=youtu.be
1.Download any of these Custom ROMs
RainbowMod for Lumia 710 [Updated 28.07.2012] : http://forum.xda-developers.com/showthread.php?t=1654415
Rataplan V1.0 - WP 7.8 for Lumia 710 All languages : http://forum.xda-developers.com/showthread.php?t=1937317
Lumiatrix 5 - [WP 7.8] - [ALL LANGUAGES!!] by vova1609 : http://forum.xda-developers.com/showthread.php?t=1899973
2.Extract both the files in same folder (select both rar files and right click>extract here)
3.You will get a file new-os.nb
4.Open NSS PRO
5.Go To Flashing - >WP7 Tools
6.Power on Phone normally and connect it using USB cable.
7.Let Windows Find your phone with correct drivers.
8.On Bottom - Left choose Nokia USB Connectivity.
9.Click On DETECT
10.Select "Normal Mode", "OSBL Mode" from the dropdown boxes.
11.Now click on "OS File" and choose the ".NB" file you want to flash.
12.Click on "Write OS".
13.Wait till it flashes and then when it says done, unplug your device and remove the battery.
Now reinsert and switch on.
In case your phone is not detected by the PC,
Run NSS PRO as administrator
Power off your phone and disconnect the USB from the PC
Now hold volume UP key and plug it into the USB
Then you should be able to Write OS perfectly.
14.While entering LIVE ID during setup it asks for activation code.
Go here HERE
Chat with them and ask for activation code and enter it in the device and proceed.
I am not responsible fro any damage done to your device, you take all responsibility for what you do.
Backup your DPP partition or use my tool to avoid lost the activation code
Then the step 14 is not needed
dewe said:
Backup your DPP partition or use my tool to avoid lost the activation code
Then the step 14 is not needed
Click to expand...
Click to collapse
Thanks mate..
could u help me with link?
I will add it to the thread, and give both ways as optional for which people feel easier
surya467 said:
Thanks mate..
could u help me with link?
I will add it to the thread, and give both ways as optional for which people feel easier
Click to expand...
Click to collapse
use this tool,skip the dsp and usp,it isn't need bakup the dpp!
the thread:http://forum.xda-developers.com/showthread.php?t=1665821
Thanks for the info. You are great.
Sent from my Lumia 710 using Board Express
I have a problem
After I installed Qualcomm Bootloader in Lumia 710
He offered me a disc format, and I made it
In this context my Nokia will no longer turns
When you connect the USB cable does not recognize my drivers
Is there help?
Moki1 said:
I have a problem
After I installed Qualcomm Bootloader in Lumia 710
He offered me a disc format, and I made it
In this context my Nokia will no longer turns
When you connect the USB cable does not recognize my drivers
Is there help?
Click to expand...
Click to collapse
Hi,
If the Qcom loader still running in RAM - yes, you can fix. If removed from USB,
watchdog restarted it, battery drained, etc - no way for now to fix.
Regards
Bph&co said:
Hi,
If the Qcom loader still running in RAM - yes, you can fix. If removed from USB,
watchdog restarted it, battery drained, etc - no way for now to fix.
Regards
Click to expand...
Click to collapse
Uh
Whether these in service to know what it is if you send him to complain?
iv mentioned clearly in red..NO! for a format!! :/
surya467 said:
iv mentioned clearly in red..NO! for a format!! :/
Click to expand...
Click to collapse
oh and I know now, but before I had read everything.
But let me how to make my Nokia
No one initial bzzzz so nothing impossible with her.
bit worried bout that!
ill have a word around and let u knw..
thanks for this guide
I'm kinda noobish with WP flashing, I have a T-Mobile USA branded Lumia 710 and I've heard that the Nokia Network Setup app has been missing for months now, if I am unable to get it with the stock ROM will I be able to flash like an official Indian ROM with this guide? someone told me a version that has preloaded the Nokia Network Setup on it, I've heard also about Russian versions...
any feedback would be appreciated
giodelgado said:
thanks for this guide
I'm kinda noobish with WP flashing, I have a T-Mobile USA branded Lumia 710 and I've heard that the Nokia Network Setup app has been missing for months now, if I am unable to get it with the stock ROM will I be able to flash like an official Indian ROM with this guide? someone told me a version that has preloaded the Nokia Network Setup on it, I've heard also about Russian versions...
any feedback would be appreciated
Click to expand...
Click to collapse
this guide is for flashing a 710 with custom ROM
and the network app is missing...
u might need to download an older firmware for this.
but i would suggest u stick to updated, since there is a huge improvement in battry
surya467 said:
this guide is for flashing a 710 with custom ROM
and the network app is missing...
u might need to download an older firmware for this.
but i would suggest u stick to updated, since there is a huge improvement in battry
Click to expand...
Click to collapse
thanks, I flashed 1600.3031.8773.12121 Nokia RM-803 Country Variant United Kingdom GB V5 BLACK (059N2L6) Tango from Navifirm, it's unbranded and has the nokia network Setup app
great
Facebook link not working
Facebook link not working....
Can you post it again?
Never mind ..got it...flashed
Hi! Thanks for this simple to understand but amazing guide! I did it, but when finish the phone asks me for the PIN number. I entered the default carrier PIN of my SIM card and it says that it's incorrect PIN. Is this number it asks the activation code you mentioned a few posts ago?
kalya said:
Facebook link not working....
Can you post it again?
Never mind ..got it...flashed
Click to expand...
Click to collapse
Link fixed
Harlley Sathler said:
Hi! Thanks for this simple to understand but amazing guide! I did it, but when finish the phone asks me for the PIN number. I entered the default carrier PIN of my SIM card and it says that it's incorrect PIN. Is this number it asks the activation code you mentioned a few posts ago?
Click to expand...
Click to collapse
The PIN should be your carrier PIN, the other part is the activation code for LIVE services
You should put a direct link to the dev website because a new version is available
Hey guys , i wonder what will my phone ( lumia 900 , wp 7.8 ) takes if i try to put inside wp8 ........
has anyone try it ?
And one more q , i have windows 8 in my pc and i cant connect my phone to metro app Windows phone , why is this for ?
thanks for your time
Well, first the bootloader would have to have an exploit found in it. Then a uEFI bootloader would have to be crafted. Probably drivers would all need to be rebuilt... It's more realistic to just buy a WP8 lumia.