Hi all!!
I've a problem with my N7100! I can't install twrp with my stock 4.3 DUEML4! Noway with Gomanager or Odin!
Something to do?
PS: I've Rooted Access, E3 Recovery Standard
Up
Up
Up
Shindoruk said:
Hi all!!
I've a problem with my N7100! I can't install twrp with my stock 4.3 DUEML4! Noway with Gomanager or Odin!
Something to do?
PS: I've Rooted Access, E3 Recovery Standard
Click to expand...
Click to collapse
Post error/status from odin..make sure md5 is verified
do you have samsung usb drivers installed (for Odin)?
qtr4 said:
do you have samsung usb drivers installed (for Odin)?
Click to expand...
Click to collapse
Yes!! When i try to install pda, odin returns to windows with an error of stop
Shindoruk said:
Yes!! When i try to install pda, odin returns to windows with an error of stop
Click to expand...
Click to collapse
try google: "Fixing Bricks/Odin Errors"
Related
Hi all i started to upgrade to 2.3.6 android with odin version 4.38 and after 40 minutes Odin still stack on amss.mbn downloading. Anyone know what can help ? Maybe other odin version ?
Ok i made it, u need to get odin 4.43 and it will works.
If someone have any questions post here maybe i will can help
Hunteros said:
Hi all i started to upgrade to 2.3.6 android with odin version 4.38 and after 40 minutes Odin still stack on amss.mbn downloading. Anyone know what can help ? Maybe other odin version ?
Click to expand...
Click to collapse
Hmm.. not sure about that.
I upgraded using Kies.
I just used Odin 4.43 today to install CWM and it works.
AdliHebat said:
I just used Odin 4.43 today to install CWM and it works.
Click to expand...
Click to collapse
how did you do it?
scarey23 said:
how did you do it?
Click to expand...
Click to collapse
You open Odin, put in the ancora.ops, put the md5 file in One Package and start (with phone connected in donwload mode ofc) In 5 seconds it's done
hi fender, done that [i think] ..i've copied K.P.'s zip onto the phone so how do i get to load that ?
edit.....got into cwm and now installing KP's rom [i hope]
Hi..
I rooted my Captivate i896 with SuperOneClick.
I can not get past the 3e error signature check for the life of me...
HELP!!!!!!!!!!!!!!!!!
I am using MAC OSX.
guygella said:
Hi..
I rooted my Captivate i896 with SuperOneClick.
I can not get past the 3e error signature check for the life of me...
HELP!!!!!!!!!!!!!!!!!
I am using MAC OSX.
Click to expand...
Click to collapse
Which CWM Recovery are you using ?
v5.0.0.7
optimusodd said:
Which CWM Recovery are you using ?
Click to expand...
Click to collapse
guygella said:
v5.0.0.7
Click to expand...
Click to collapse
I think you need to install mono first as you are on Mac.
http://www.go-mono.com/mono-downloads/download.html
---------- Post added at 12:22 AM ---------- Previous post was at 12:11 AM ----------
Here we go,follow the steps :
>Enable USB debugging on your phone and connect it to your mac
>Download SuperOneClickv1.6.5-ShortFuse from here :http://forum.xda-developers.com/showthread.php?t=803682
>Download "3e_recovery_installer.zip" and "update.zip (1.34 mb)" from here :http://forum.xda-developers.com/showthread.php?t=833423
>Run install.bat from 3e_recovery_installer folder.
>Put update.zip (1.34 mb) in your internal sdcard and boot under recovery.
>Select reinstall package option. Update.zip will get installed and phone will reboot.
>Get the actual CWM recovery update.zip (1.72 mb).You can get this using ROM manager.
>Put this update.zip (1.72 mb) in your internal sdcard and boot under recovery. >Select reinstall package option. Update.zip will get installed and phone will reboot and will be back in recovery mode.
>Select reinstall package again you now have CWM recovery.
Phone is already rooted..
Can not get root access in 3e_recovery_installer program...
PS> I switched to windows.
guygella said:
Hi..
I rooted my Captivate i896 with SuperOneClick.
I can not get past the 3e error signature check for the life of me...
HELP!!!!!!!!!!!!!!!!!
I am using MAC OSX.
Click to expand...
Click to collapse
maybe this thread ?
guygella said:
Phone is already rooted..
Can not get root access in 3e_recovery_installer program...
PS> I switched to windows.
Click to expand...
Click to collapse
Also go through this :
http://forum.xda-developers.com/showthread.php?t=1350266
Hi..
Ok.. I can not get into download mode nor CWM....
Is there a program to force hack its way in ?
Ok...
Bootloop
i9001 and i896 screens over and over and over... also tying to get into download mode... gives me just a battery charging screen...
[email protected]!!!!
guygella said:
Ok...
Bootloop
i9001 and i896 screens over and over and over... also tying to get into download mode... gives me just a battery charging screen...
[email protected]!!!!
Click to expand...
Click to collapse
Are you already rooted ? Do you have "superuser" privilege ?
Run this to make sure:https://play.google.com/store/apps/details?id=com.joeykrim.rootcheck&hl=en
Rooted. And yes I have superuser status.. IF I can get back in!
optimusodd said:
Are you already rooted ? Do you have "superuser" privilege ?
Run this to make sure:https://play.google.com/store/apps/details?id=com.joeykrim.rootcheck&hl=en
Click to expand...
Click to collapse
guygella said:
Rooted. And yes I have superuser status.. IF I can get back in!
Click to expand...
Click to collapse
Okay,now you have superuser previlege.
Exactly what you want to do now ?
You want to Flash a custom ROM ?
guygella said:
Hi..
Ok.. I can not get into download mode nor CWM....
Is there a program to force hack its way in ?
Click to expand...
Click to collapse
how did you get in this trouble what is your firmware?
now it seems you don't have 3e problem but 3-buttons problem read above link search in page for "3-button"
try to enter recovery by adb tool
Code:
adb reboot recovery
after this quickly remove usb cable from phone
If you tray to install custom ROM
1. Download from market "ROM Manager"
2. Install "ClockworkMod Recovery" or "AmonRa" (have it into ROM Manager)
3. Go to XDA Search and find your phone into forum and find good custom ROM.
4. Download it and paste it to SD card of your phone
5. Power Off phone and press "Home" button + "Power" button to get into Recovery mod and from them you will be ably to install new ROMs ;]
Thanks
I did.
At this point I just want the phone back to ANDROID Ginergerbread OS and operational.
optimusodd said:
Okay,now you have superuser previlege.
Exactly what you want to do now ?
You want to Flash a custom ROM ?
Click to expand...
Click to collapse
guygella said:
I did.
At this point I just want the phone back to ANDROID Ginergerbread OS and operational.
Click to expand...
Click to collapse
would you like to tell us how you solved it ?
see you ..a lot of people want to get experience from this that's the reason we try to contribute here
thanks!
>>>???<<<
Solved what? Go back and read this thread AGAIN!
This issue is NOT solved!
ruscan.calin said:
would you like to tell us how you solved it ?
see you ..a lot of people want to get experience from this that's the reason we try to contribute here
thanks!
Click to expand...
Click to collapse
guygella said:
>>>???<<<
Solved what? Go back and read this thread AGAIN!
This issue is NOT solved!
Click to expand...
Click to collapse
you started to tell us you have a 3e problem but seems you have a 3-buttons problem also you never told us what you did to enter this trouble? have you read the links provided above? be more specific and provide more info!
With ODin.. I loaded two boot loaders over each other...
i9000 and i897 hence why I can not get back into download mode to reflash..
BAsically I have to find a way to force this phone back into download mode.
guygella said:
With ODin.. I loaded two boot loaders over each other...
i9000 and i897 hence why I can not get back into download mode to reflash..
BAsically I have to find a way to force this phone back into download mode.
Click to expand...
Click to collapse
well read this thread as I said i.e. read post #3 and follow instruction this will modify/ patch your recovery so you can access it but you need a Windows machine also you can try to flash back to 2.1 stock rom and follow instructions on post #1 you need a Windows machine...also if you need stock roms for your phone look at
this thread or just enter sammobile and enter "897" as search string you get stock 2.1 rom (you need subscription to download)
Please help I have a ace 2 tried to root it but I must of used old version has I'm stuck on where it says ace 2 gt-i8160 I can go into both download mode and recovery I've cleared chache reset it rebooted it still no joy it won't connect to kies or Odin and when in recovery mode it say can't acces to ' /system/csc/BTU/system any help would be nice thank you
Are you sure you can't enter to download mode (vol down + home + power)?
Rox said:
Are you sure you can't enter to download mode (vol down + home + power)?
Click to expand...
Click to collapse
Hi yes I can enter both download an recovery modes
opps misread
are you on Jelly Bean or GingerBread ?
Rox said:
opps misread
are you on Jelly Bean or GingerBread ?
Click to expand...
Click to collapse
Jelly bean an i personally believe I have tried rooting it from a old version ment for gingerbread
possible you flashed gb root kernel...
rooting jb is simplier, just flash Root.zip from this thread
but, you cant do it now because you have wrong kernel on your phone.
have you tried redownloading usb drivers to get your phone recognized by odin.
because if you connect phone to odin simply flash new fw over...
Rox said:
possible you flashed gb root kernel...
rooting jb is simplier, just flash Root.zip from this thread
but, you cant do it now because you have wrong kernel on your phone.
have you tried redownloading usb drivers to get your phone recognized by odin.
because if you connect phone to odin simply flash new fw over...
Click to expand...
Click to collapse
Where is the best place to get them from both the drivers an new fw sorry to be a pain
http://forum.xda-developers.com/showthread.php?p=11633550#post11633550 - Drivers
http://forum.xda-developers.com/showthread.php?t=2340849 - Firmwares thread
Also am I using the correct version of Odin Odin3 v3.07
yes, you can use 3.07
So install drivers unzip files put phone in download mode connect an hopefully my poorer little phone will be back now Odin won't open argh
Rox said:
yes, you can use 3.07
Click to expand...
Click to collapse
Big massive thank you I'm back up an running now how do I root lol
just flash Root.zip from this thread
Rox said:
just flash Root.zip from this thread
Click to expand...
Click to collapse
Is this fine for ace 2
Fennybad said:
Is this fine for ace 2
Click to expand...
Click to collapse
Yes it is. This is a bit universal JB root method - worked on SII with JB too...
Hi guys. I've got a problem..... I tried flashing CWM 6.0.3.4 to my Wonder, I open Odin, I choose files (Ancora.ops and CWM), Odin recognises my phone, but when I press "Start", the program gets stuck at "<1> setup connection..."
I tried changing USB cable, port, even Odin (I tried 4.43 - 4.38 and 3.98), but nothing has changed..... I am running Windows XP, and I have installed only Samsung USB Drivers, without Kies. But, as said before, Odin recognises my Wonder..... even tried on another XP computer, and have the same result...... please help me
ayesse said:
Hi guys. I've got a problem..... I tried flashing CWM 6.0.3.4 to my Wonder, I open Odin, I choose files (Ancora.ops and CWM), Odin recognises my phone, but when I press "Start", the program gets stuck at "<1> setup connection..."
I tried changing USB cable, port, even Odin (I tried 4.43 - 4.38 and 3.98), but nothing has changed..... I am running Windows XP, and I have installed only Samsung USB Drivers, without Kies. But, as said before, Odin recognises my Wonder..... even tried on another XP computer, and have the same result...... please help me
Click to expand...
Click to collapse
guide for flashing via odin. follow it carefully/ correctly Link
another way is via terminal emulator. dl link and guide
dec0der said:
guide for flashing via odin. follow it carefully/ correctly Link
another way is via terminal emulator. dl link and guide
Click to expand...
Click to collapse
I followed the Odin guide step by step, but I can't solve the problem..... BTW, my Wonder is unrooted, so I can't install CWM via terminal
ayesse said:
I followed the Odin guide step by step, but I can't solve the problem..... BTW, my Wonder is unrooted, so I can't install CWM via terminal
Click to expand...
Click to collapse
are you using stock or custom rom? can you provide a screenshot?
dec0der said:
are you using stock or custom rom? can you provide a screenshot?
Click to expand...
Click to collapse
Lol bro he's unrooted and trying to flash cwm. Don't you think it's pretty obvious he's using stock rom?
Bro, you have to root it first, only then you should flash CWM. Because you can't root using cwm. Anyway, root first then flash via terminal emulator. Should work.
Sent from my MB860 using xda app-developers app
iDelta said:
Lol bro he's unrooted and trying to flash cwm. Don't you think it's pretty obvious he's using stock rom?
Bro, you have to root it first, only then you should flash CWM. Because you can't root using cwm. Anyway, root first then flash via terminal emulator. Should work.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
OOOOOH F*CKKKKK! LAWLZ! honestly, i never thought of that, my bad
oh sorry guys, I haven't told you.... I want to install CWM because I wanna install Cyanogenmod 10 to get rid of this ****ty stock rom
ayesse said:
oh sorry guys, I haven't told you.... I want to install CWM because I wanna install Cyanogenmod 10 to get rid of this ****ty stock rom
Click to expand...
Click to collapse
Pull out the battery for a few seconds and try to flash via odin again?
ayesse said:
oh sorry guys, I haven't told you.... I want to install CWM because I wanna install Cyanogenmod 10 to get rid of this ****ty stock rom
Click to expand...
Click to collapse
*sigh!
just follow this steps:
1. root ur phone- guide HERE
2. install cwm- guide HERE
3. install desired custom rom (pristine)- guide (HERE)
Note:
*Don't forget to check md5 checksum of downloaded files b4 flashing.
*Follow instructions carefully/ correctly.
solved flashing on another Win7 laptop.... thanks for your replies
Hello I am on 4.3 MK4
I want to flash philz recovery but odin not detecting my phone
what to do ?
hanj12 said:
Hello I am on 4.3 MK4
I want to flash philz recovery but odin not detecting my phone
what to do ?
Click to expand...
Click to collapse
Are you rooted or not?
If yes, Then Flash via Mobile Odin.
If No, Try from a different usb port or pc. It might work.
DeepankarS said:
Are you rooted or not?
If yes, Then Flash via Mobile Odin.
If No, Try from a different usb port or pc. It might work.
Click to expand...
Click to collapse
I tried it but still not workin
I even did a factory resest but still not detecting :crying:
Try a different USB port and/or another PC.
You can also try Mobile Odin.
ordin not detect solution
Try run as administrator while open the ordin. Make sure you have updated samsung usb software.
hanj12 said:
Hello I am on 4.3 MK4
I want to flash philz recovery but odin not detecting my phone
what to do ?
Click to expand...
Click to collapse
did u installed samsung USB drivers u need them on ur pc for odin to detect ur phone plus dnt install kies when u wana use odin
mobile odin work on 4.3?
thanks for u all it just worked
Mobile Odin and 4.3
sora9009 said:
mobile odin work on 4.3?
Click to expand...
Click to collapse
According to some comments on the playstore link - the answer is no.
:/
DeepankarS said:
Are you rooted or not?
If yes, Then Flash via Mobile Odin.
If No, Try from a different usb port or pc. It might work.
Click to expand...
Click to collapse
Boot ur gn2 in downloadmode ,connect to ur pc ,open odin,remove ur gn2 BATTERY ,voila odin will recognise ur gn2
hanj12 said:
Hello I am on 4.3 MK4
I want to flash philz recovery but odin not detecting my phone
what to do ?
Click to expand...
Click to collapse
Check if you have any software running that could conflict with Odin. For example: Kies