Help cwn p930 - LG Nitro HD

I don't up cwn lg P930.
Share for me.help help

Up up

Sent from my LG-P930 using xda app-developers app

I can not get up cwn you can help me out.
Gửi từ Q Smart S12 của tôi bằng cách sử dụng Tapatalk 2

I do not .KDZ topic on the machine but I do not and can not change anything about room 4.0.4
Gửi từ Q Smart S12 của tôi bằng cách sử dụng Tapatalk 2

It would be hard to help you if we can't even understand what you are asking for.

I want ask about the recovery of the LG P930
Gửi từ Q Smart S12 của tôi bằng cách sử dụng Tapatalk 2

toi.yeu.viet.nam said:
I want ask about the recovery of the LG P930
Gửi từ Q Smart S12 của tôi bằng cách sử dụng Tapatalk 2
Click to expand...
Click to collapse
Swetnes said:
NOW YOU CAN INSTALL CWM DIRECTLY FROM ICS
INSTALL AN UNLOCKED BOOTLOADER WITHOUT UNBRICKING​
A few months ago I found this thread on XDA :http://forum.xda-developers.com/showpost.php?p=42657066
This thread provided a way to install CWM from Jellybean V30C for the SU640 without unbricking the phone first. Now not exactly the same, the phones are close enough that it peaked my interest. Digging into it I discovered that the partition mmcblk0p7 contains the bootloader, and it was as simple as pushing the unlocked bootloader from Gingerbread to the correct partition, therefore bypassing the entire need to unbrick the phone first and thus allowing the install of CWM.
So I got brave enough and installed the P936 v10i Gingerbread ROM and used the command in ADB shell to extract the bootloader:
dd if=/dev/block/mmcblk0p7 of=/sdcard/bootloader.img. After this I restored my phone completely to stock. Rooted using the root at the above link, then ran my batch file and I had CWM no Security Error!!
The steps are simple:
Start with stock ICS (any version, carrier or phone version p93x). v20c, v20d, v20e, or v20f.
1. ROOT PHONE with the root from the above link or any method that works for you.
2. Run my batch file.
3. Install a custom ROM.
Before anyone asks me I used v 6.0.1.5 TOUCH for CWM. There are actually several reasons why. For me v 6.0.4.5 was incompatible with any ROM with kernel version 3.4. Also if I would initiate a backup from the Rom Manager app, CWM couldn't locate the backup directory.
ENJOY
:victory:
First this only is recommended for LG's Nitro HD models P930, P935 & P936. I do not recommend installing on the SU640 or LU6200.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2598278
Sent from my LG-P930 using xda app-developers app

Related

[Request] Deodexed XXMC8

I'm using stock xxmc8 rom and I want to apply ink effect for my ace 2 but it requires Deodexed rom so I search for it on our forum but there's only Deodexed XXMB2 and XXMB4, so can anyone make a Deodexed XXMC8 without any mod or adding tweaks for our ace 2?
Of course I can use Italian job v1.0 but I'm waiting for official jelly bean for my country so I don't want to use cook Rom. Anyone can help please!
Gửi từ GT-I8160 của tôi bằng cách sử dụng Tapatalk 2
stripeqn said:
I'm using stock xxmc8 rom and I want to apply ink effect for my ace 2 but it requires Deodexed rom so I search for it on our forum but there's only Deodexed XXMB2 and XXMB4, so can anyone make a Deodexed XXMC8 without any mod or adding tweaks for our ace 2?
Of course I can use Italian job v1.0 but I'm waiting for official jelly bean for my country so I don't want to use cook Rom. Anyone can help please!
Gửi từ GT-I8160 của tôi bằng cách sử dụng Tapatalk 2
Click to expand...
Click to collapse
You can deodex it yourself.
Here you have nice deodexed XXMC8:
http://translate.googleusercontent.com/translate_c?depth=1&hl=pl&ie=UTF8&prev=_t&rurl=translate.google.pl&sl=auto&tl=en&u=http://4pda.ru/forum/index.php%3Fshowtopic%3D429597%26view%3Dfindpost%26p%3D20954752&usg=ALkJrhg1OfXQfT8-TFVgUlPX2fDBYPk5Pw
Credits for this go to e_c from 4pda community.
PS. In future please use search option. Answer were posted already.
stripeqn said:
I'm using stock xxmc8 rom and I want to apply ink effect for my ace 2 but it requires Deodexed rom so I search for it on our forum but there's only Deodexed XXMB2 and XXMB4, so can anyone make a Deodexed XXMC8 without any mod or adding tweaks for our ace 2?
Of course I can use Italian job v1.0 but I'm waiting for official jelly bean for my country so I don't want to use cook Rom. Anyone can help please!
Gửi từ GT-I8160 của tôi bằng cách sử dụng Tapatalk 2
Click to expand...
Click to collapse
You can download in here :
https://docs.google.com/file/d/0B_v5mQTlEYFLc3NmNjNNdVd4aXM/preview?pli=1
Include:
- CRT
- Ripple Effect
- 4-Away Boot
Credit to :
Larry oscar and Adhit vanjava (galaxy ace 2 community)
how to apply this deodexed ROM? I've tried and my phone stucks at samsung logo, it keeps on rebooting all the time
stripeqn said:
how to apply this deodexed ROM? I've tried and my phone stucks at samsung logo, it keeps on rebooting all the time
Click to expand...
Click to collapse
Use deodexed from e_c 4pda community and then extract pda.tar.md5
Flash it with odin
Sent from my GT-I8160 using Tapatalk 2
Adriangbba6 said:
Use deodexed from e_c 4pda community and then extract pda.tar.md5
Flash it with odin
Sent from my GT-I8160 using Tapatalk 2
Click to expand...
Click to collapse
is there need to wipe all data first?
sorry newbie here
BakolteLo said:
is there need to wipe all data first?
sorry newbie here
Click to expand...
Click to collapse
Yes of course
Sent from my GT-I8160 using Tapatalk 2
Adriangbba6 said:
Yes of course
Sent from my GT-I8160 using Tapatalk 2
Click to expand...
Click to collapse
succes! thanks

[boot logo][moto e orignal boot logo][flashable zip]

Moto E boot logo
DONT WANT TO SEE UNLOCKED BOOTLOADER MESSAGE WHILE POWER ON
JUST FLASH THS ZIP TO GET ORIGNAL LOGO BACK
DOWNLOADS:-
CLICK HERE TO DOWNLOAD
Reserved
Sent from my RAINBOW using XDA Forums PRO
Has anyone tried this yet?
am2012 said:
Has anyone tried this yet?
Click to expand...
Click to collapse
Many people hav tried it
It works for sure
Sent from my RAINBOW using XDA Forums PRO

need help my yureka plus softbricked

hey guys i tried to flash excelerate kernel in my yureka plus after flashing zip it stucked in yu logo pls help:crying::crying::crying:
jamesbinny said:
hey guys i tried to flash excelerate kernel in my yureka plus after flashing zip it stucked in yu logo pls help:crying::crying::crying:
Click to expand...
Click to collapse
flash any other kernel..if it not worked then flash any rom.
and also use YUFORUM for quick responce about your query..
Sent from my YU5510 using Tapatalk

Huawei Mate 8 STOCK Firmware C00B129SP02 (CN/4GB, untouched)

Here we have Huawei´s current original STOCK Firmware for MATE 8 (chinese Version with 4GB RAM), untouched, may be useful for further ROM development
For device rooting, see "rooting Mate 8" Thread and remember to UNLOCK Bootloader before you start rooting your device.
Firmware: NXT-AL10C00B129SP02
Size: 1,56GB
Type: Original eRecovery ROM/Zip, untouched
Host: uploaded (premium only)
Mirror: see Post No #11
File: DOWNLOAD ZIP HERE
You are the hero we need, now just waiting for the international version :good:
Can this be used to reinstall software if theres is some problem with the phone???
depends on the model of the phone u have i guess. this rom is for the nxt-al10, chinese version.
btw, does this rom include all the international language packages?
Sent from my Nexus 5 using Tapatalk
Mine its the NXT-AL10 an has the same firmware version. I´m waiting for the international version too, to see if it will be possible to install it on the chinese model
btw, does this rom include all the international language packages?
Click to expand...
Click to collapse
Ja, es sind alle drin, die Rom is ja untouched
Can this be used to reinstall software if theres is some problem with the phone???
Click to expand...
Click to collapse
Yes. But you'd need to figure out how to place the file into eRecovery. You may alternatively place the file to your SD card and use the original firmware too to do a "local update"
Anyone knows some free download site to get this rom?
Thanks in advance.
um, u can just use the link provided in the OP...?
Sent from my Nexus 5 using Tapatalk
jbmc83 said:
um, u can just use the link provided in the OP...?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
It says the file is too big, and I need a "premium account" to download.
Have you been able to download without a "premium account"?
Thanks.
huh, interesting! just tried myself and got the same message. @thomascook , could u possibly provide another mirror?
Sent from my Nexus 5 using Tapatalk
@all
Uploaded the file to my private Server for no-limitation downloading ... NXT-AL10C00B129SP02.zip
thx buddy, much appreciated
Sent from my Nexus 5 using Tapatalk
And how to flash it ? There's is no local update in menu now ...
Отправлено с моего GT-I9515 через Tapatalk
unpack the zip and flash the .img files via fastboot. either that or use the italian knife tool in the android development section
And what about upgrade through recovery?
Отправлено с моего GT-I9515 через Tapatalk
well the newer versions of TWRP are able to flash .img files so it could potentially work as well
I mean stock recovery
Отправлено с моего GT-I9515 через Tapatalk
no idea, never use stock recovery
No gsm firmware download link??
um, in the OP....?
Sent from my Huawei Mate 8 NXT-AL10 using Tapatalk

Mi max 3 bootloop after lazy flasher

Everytime i instal lazy flasher my phone got stock in bootloop, i use mi max 3, oficial 8.1 rom miui X, oficial twrp and so on.... Please buddies help me!!!!
Sent from my PRA-LX1 using Tapatalk
Hey did you get any assistance with this issue... I'm having the same problem...
Yes i have... Just dont instal ****ing lazy flasher...
Sent from my MI MAX 3 using Tapatalk

Categories

Resources